How to replace window molding in Nissan Skyline R32 GTR
HTML-код
- Опубликовано: 23 авг 2024
- New OEM Nissan rear window molding trim installation before and after. Nissan's Nismo Heritage division is remaking OEM Skyline parts. Get them why you still can, many R32 GTR parts at end of reproduction cycle now that R33 is gaining more popularity in USA. It is so nice that Nissan of Japan created the Heritage program to get us all these new parts. Sure looks nice!
Rear Molding Kit 2 parts
rover.ebay.com/...
#nissanskyline #nissangtr #nismo #nismoheritage
Mine looks just like yours! Thanks for the video!
Thank you for posting this! If you had to do this project again, would you remove the window and reseal it?
Thanks man for the vid, mine just shipped. Did you do your front window also?
You bet, this is one of my older videos when I first started my channel. I did order the entire front windshield molding kit. I have not gotten around to installing it yet. My kit is still brand new in the box and sitting on my garage shelf!👍
On the trim… I need to start at the top middle and work my way to the bottom corners?
That is what I did. It might be easier to start at the bottom corners and work your way up around the corners to the center of the roof line. I think it would all line up the best that way. Installs easily it the trim sits in the sun for a while and gets warm
Is there a part number for the center piece at the top of the trim or was it included in one of the sides?
That little top center connector piece was included as part of the trim kit. Hope you can find yourself one. Try Trusk Kikaku or Terra FIrma. trust-kikaku.myshopify.com/products/oem-nissan-rear-window-molding-fastener-bnr32-663101062?_pos=3&_sid=e79717357&_ss=r
When replacing those molding trims, do you need to glue it to or no? I have a 94 Skyline R33 GTS25T and need the back windows molding trim replace and front windshield molding as well.
I didn't have to glue mine on my R32. There was a little ridge along the edge of the trim that was pressed into place on my car. I believe that there is another piece plastic trim piece around the entire glass that is glued to the car. The outer trim presses into that and its held very snug in place. Was very easy to do. Let your trim warm up in the sun, makes it easy to work with.
Thanks!
Very nice informative video. Are the interior pieces on your c-pillars peeling? Mine are. I know there are new ones for sale online. I'd love to see a video of someone replacing them.
Ya, My c-pillar interior panels are bubbling up. I might replace them later. I will make a video if I do.
How did you pull the old ones off? My 32 has the corners lifting and need to replace my trim.
If your car is sitting in the sun it makes the molding more plyable. I started at the top center and gently pull the trim out by hand. Pull it all out down to the edge and then remove the metal end pieces.
Nice, mine look like pop tarts!
Better get to work while you can still buy the trim pieces.
@@JDMRightHandDrive I was quoted $3500 AUD for just LH, RH external weather trims 😔
Any plans to do the windshield as well? Would love to watch before I attempt it on mine.
Already did windshield. Was easy. Look at my video list. It's the I'm bringing sexy back video. I have a section in there about the front windshield trim.
Awesome thanks. Saw the rear and the doors video. I’ll check out the front. My top corners are peeling up on me.
@@JDMRightHandDrive Can't seem to find the video for the front... was it removed?
@@calvinong1106 ruclips.net/video/kEAWoUO-ehI/видео.html @6'57" this is only putting in the upper center windshield trim. I did recently purchase an entire kit including the sides from Nissan. I am planning on doing a video when I finish my turbo videos. Might be a while!
Does it just slide in?
From what I remember I left the trim in the sun so it was warm and pliable. I was able to push it right in to the inner trim retainer.
@@JDMRightHandDrive then maybe just using a heat gun will do.
Hey man, I cant tell by your video, did you slide the trim off? or did you pry it up? mine is pretty brittle and has rtv added to it by prior owner or some of the trim. I was able to slide of the metal corners as you show, but the trim itself wont budge. I just dont want to pry on it hard and run the risk of breaking the bottom piece. Thanks
Mine was able to just peal away and pry out using my hands. Luckily mine was not secured with rtv. Good luck, hope you dont damage your under pieces.
Great vid man, what was the cost of all the trim? The front has a plastic bottom piece that holds the trim molding thru clips of sort, does the rear have that? I am planing to do all the trims on mine. Thanks, thumbs up.
The entire rear kit was around $140. You can find it on ebay from Nissan of Tacoma.
The rear kit has the same clips that hold it in. Removal is simple, you can pull all the pieces off in 2 minutes.
Are there any pieces that do not come in the kit (windshield and rear window kits)? As in if it breaks during removal it can’t be replaced.
@@SLR762 If I remember correctly everything you need comes in the kit. Just use caution when prying. specially the corner pieces. It all depends if someone did any sort of repair or touched it during the lifetime of the car, if that's the case then good luck.
@@1970PMD thankyou. I know this video is ancient.
How much were the trim pieces ? please
I order them from Tacoma Nissan, I believe I paid around 1:45 for the entire set.
@@JDMRightHandDrive 👍🏼
Video called how to replace the rear window moulding yet you don’t show how to remove the current moulding? 🤔 before installing the new ones
You just pull it
Anyone know if the 2door trim pieces are same or different then the 4 door
The door trims are different from what I've seen.