Instrument/ Speedometer/ Gauge Cluster Removal and Install on your Jeep Wrangler 2007-2011 JK
HTML-код
- Опубликовано: 15 сен 2024
- If you need to replace non-working speedometer/ instrument gauge cluster or give your Jeep a new look, watch the video for easy to follow instructions.
Also if you want to upgrade your standard cluster to have Rubicon features, watch this video:
• Jeep Wrangler 2007-11 ...
Related Jeep Wrangler videos:
Steering Wheel Play, Knock, or Click on your Jeep JK/ JKU Wrangler May be a quick fix!
• Steering Wheel Play, K...
Do not Jack up Jeep Wrangler Stuck Door:
• Remove Stuck Doors of...
Cheap Way to Add Cruise Control to Jeep JK/JKU Wrangler 2007-2011
• Cheap Way to Add Cruis...
Air bag, Steering Wheel, Clock Spring removal on Jeep JK/JKU Wrangler 2007-2011
• Air bag, Steering Whee...
Stereo Radio Upgrade and Install in 2007-2011 Jeep Wrangler JK
• Upgrade and Install St...
Upgrade the Look of Speedo Cluster on your Jeep Wrangler 2007-2011 JK
• Instrument/ Speedomete...
Why is it important to replace the timing belt at the manufacture’s intervals
• Don't let Timing Belt ...
Installation, Aiming, and Testing of GTR Lighting ULTRA 2 LED Headlights for 07-11 Jeep Wrangler
• Installation, Aiming,...
Long Extended Trailer Hitch Installation - For Bike Rack etc:
• Long Extended Trailer ...
Simple Front Shocks Replacement:
• Simple Front Shocks Re...
If you have any questions or I missed something, comment below and I’ll answer and try to help you out
If you find this video helpful, like it and subscribe to my new channel. I’ll have tons of videos on all kinds of car and truck repairs in the future.
⚠️Disclaimer:
The videos on Motorcarnut2020 channel are posted with informational purpose only.
Information posted in this video does not guarantee any particular result. Use this information provided in the video with caution and at your own risk. It is the responsibility of the viewer to take this risk.
Motorcarnut2020 is not responsible or liable for property damage, any loss damage, or injury related to or resulted from information posted in this video.
How about a video showing how to get the console off an early JKU when the hand brake handle won't raise high enough & stays in the way? Something easier than removing the rear wheels, calipers and rotors to allow the e-brake shoes to extend more?
When I get one in the shop I can make a video
Exactly what I needed to know.
Thanks.
No problem
Thank you for this video. My led lights under my rpm gauge that tell me my mileage and what drive I’m in just went dead. I hope it’s a simple fix 😬
Could be a bad connection, did you replace the cluster for some reason?
Great video.
You mentioned that you would talk about the compass but I didn't see it.
Having electrical issues that most people are attributing to instrument cluster.
Mine does not have compass or temp. The used one I'm looking at does. Do you think that will be an issue?
Thanks
No, you will get temperature, mile per gallon distance to empty etc but to get the compass you need the module that goes in the center top panel over the stereo and a factory level scan tool to turn it on unless it won’t work. I have a navigation that has a compass so I didn’t go that route but the rest works great, also if your Jeep doesn’t have cruise control I have another video on installing that as plug and play
I am wanting to swap out my 09 JKU cluster for one that I purchased on eBay. Where do you recommend getting it reprogrammed for mileage to match, and will I mess up my Jeep if I plug it in without getting it reprogrammed?
The dealership has to program the correct mileage to the new cluster by law. Check with your local dealership before you buy it.
You can buy these on eBay preprogrammed with your mileage. Search “09 Jeep Wrangler Instrument Gauge Cluster Speedometer YOUR MILEAGE PROGRAMMED!” The seller also offers programming service, just message them.
Can you do a video on how switch out the instrument bulbs??🎉
I'll try soon
Im thinking I can pull the cluster apart and make the silver color blue with paint or something.
Does it come apart like that?
Yes, you can do that
So to replace a bulb, you take the 4 tabs apart and take the white plastic part off to access the bulbs? Or? Thanks.
Yes, depending on year and model, some have non replaceable LED’s
Have you heard about a "no bus" and all the lights coming on? I've been looking and most say cleaning the contacts is the fix. What do you think?
Bad cluster if connections are clean and tight in the back of cluster
Exactly what I was searching for! Dumb question, if the needles of the new Cluster are not aligned where they are supposed to be, is this Cluster good? How can I align them?
Yes, it should be fine. Don’t put it in that way some won’t correct themselves. Just take the front clear lens off and put the back to their stops.
Great, will do that! Thanks for the response!! 👍@@Motorcarnut
@user-dq6dn9yf1g No problem!