A power surge during an electrical storm caused TV to not work. Watching this video decided it was the power supply. Replaced per instructions in this video. TV now works. Good video.
So I believe I have had a power surge to my tv and I already just ordered a new fuse for it. I did not have an electric tester on hand to check the fuse and diodes so I just took the fuse out and the fuse broke while doing so. Can I still check the diodes without the fuse? Also that fuse has to be soldered to the board correct?
This sucks my elderly father needed a TV and I don't have a lot of money this year for Christmas so I got him a used 55 in same TV the people that I got it from plugged it in and it came on I thought it was good until I got home and I realized it only shows the Philips logo and then the TV shuts back off I've tried resetting it I got screwed for 100.00 and want to know if I can possibly fix this TV if you know what's wrong with it it'll turn on show The Philips logo then turn off in the white LED light will stay on for 20 seconds then
I bought this tv from Walmart on clearance. After a couple months the remote would not connect to the tv. Everything else works. Do I need to buy another remote and how would I pair the remote to the TV?
Would you happen to recommend any calibration settings for this model??? Or come across anyone out there who has??? Currently cannot find anything on the web
So i have this exact model i dodnt have any power so i replaced all 3 boards now i have power and power indicator flashes but i still have no led picture could it be a faulty board i purchased or do i need new led strups how do i troubleshoot at this stage
I'm not sure what university or technical trade school you were taught at, but true professionals are very well aware that you NEVER measure components while they are still connected to a circuit! You may have the rest of these 'youtube engineers' fooled, but you're really not winning any brownie points with true professionals. The reason that one never measures a component whilst it is on a circuit is because even if your fuse was blown, you could very well be closing the circuit with your ohmmeter. In case you do not know how an ohmmeter works, it sends out a small current in order to check continuity. And seeing as you have NO IDEA how the board is wired, there is no way that you could tell if you aren't actually just sending a current from one end of the fuse all around the board through other components and then back around to the other end of the fuse. In fact, depending on what kind of pcb you were measuring, like says smaller micro electronics, you could actually fry a chip by doing such a stupid thing. The fact that I have to explain this to you is disgraceful. Maybe you should stop being a Sunday electrician and leave these professional instruments to those who know how to use them.
A power surge during an electrical storm caused TV to not work. Watching this video decided it was the power supply. Replaced per instructions in this video. TV now works. Good video.
Thank you for the tutorial! What does the power supply board cost and where did you order it from? Thanks again!
So my tv turn on but only the backlight comes on . No image is produce . What could be the issue
So I believe I have had a power surge to my tv and I already just ordered a new fuse for it. I did not have an electric tester on hand to check the fuse and diodes so I just took the fuse out and the fuse broke while doing so. Can I still check the diodes without the fuse? Also that fuse has to be soldered to the board correct?
@after hours tv/ pc repair. So the diodes shorted when you used a jumper to cross the fuse ?
Why aren’t you using the diode test function on your meter? It’s right next to the resistance function you’re using.
This sucks my elderly father needed a TV and I don't have a lot of money this year for Christmas so I got him a used 55 in same TV the people that I got it from plugged it in and it came on I thought it was good until I got home and I realized it only shows the Philips logo and then the TV shuts back off I've tried resetting it I got screwed for 100.00 and want to know if I can possibly fix this TV if you know what's wrong with it it'll turn on show The Philips logo then turn off in the white LED light will stay on for 20 seconds then
Need your help with my tv repair. Can do virtual and pay ya for the walkthrough. Thanks
Email me Hitandrepair at gmail
I bought this tv from Walmart on clearance. After a couple months the remote would not connect to the tv. Everything else works. Do I need to buy another remote and how would I pair the remote to the TV?
replace tv , the remote is fine
@@@erikruiz5004
😈🤣😂😂😂
Oh no kidding you too. Phillips are trash
And what Todo if only the backlight turns on?
Where do you buy the fuse replacements or an entire new board? Shop jimmy? What was the exact item name ordered
Ashley Drezak Baomain 20 Pcs DIP Mounted Miniature Square Slow Blow Micro Fuse T2.5A 2.5A 250V UL List www.amazon.com/dp/B009PMJ082/ref=cm_sw_r_cp_api_i_Z4iOEbNYA0RR2
Would you happen to recommend any calibration settings for this model??? Or come across anyone out there who has??? Currently cannot find anything on the web
Calibration for what?
@@hitandrepair color calibration
Is is showing a blue tint?
@@katieeastlack629 no..i just wanted to see if i could optimize the picture settings? Or if anyone has suggestions on what settings to use...
you shorted more diodes . I repaired one with just one bad diode.
Hey my lights on but screen black little crack on side
Please can someone help me to find the dump of my TV philips lcd 32pfl5409/98 thanks in advance.
So i have this exact model i dodnt have any power so i replaced all 3 boards now i have power and power indicator flashes but i still have no led picture could it be a faulty board i purchased or do i need new led strups how do i troubleshoot at this stage
Where did you get the boards and how much were they?
It looked like you released the magic smoke from the right side transformer
What if it gets stuck on 100 vol everything else works
✊🏾✊🏾✊🏾✊🏾🇳🇬
This is not working ITS NEED A PHONE INSTALLED IN A PHONE SPIKEROID CUZ OUR REMOTE IS BROKEN AND I CANT CONTROL IT
This didn’t help....
I'm not sure what university or technical trade school you were taught at, but true professionals are very well aware that you NEVER measure components while they are still connected to a circuit! You may have the rest of these 'youtube engineers' fooled, but you're really not winning any brownie points with true professionals. The reason that one never measures a component whilst it is on a circuit is because even if your fuse was blown, you could very well be closing the circuit with your ohmmeter. In case you do not know how an ohmmeter works, it sends out a small current in order to check continuity. And seeing as you have NO IDEA how the board is wired, there is no way that you could tell if you aren't actually just sending a current from one end of the fuse all around the board through other components and then back around to the other end of the fuse. In fact, depending on what kind of pcb you were measuring, like says smaller micro electronics, you could actually fry a chip by doing such a stupid thing. The fact that I have to explain this to you is disgraceful. Maybe you should stop being a Sunday electrician and leave these professional instruments to those who know how to use them.
Yeah this video was bad. I hope no one's actually believes this. He literally blew the tv at the end and made it worse.