Fixing LG Plasma just keeps clicking and does not turn on 50PA4500
HTML-код
- Опубликовано: 24 сен 2017
- Dont Throw away the tv just yet. Keep watching.
The fix works for the following
Lg
50PA4500-UM AUSYLUR 50PA4500-UF AUSLLUR 50PA4500-UF AUSLLHR 50PM9700-UA AUSLLJR 50PM6700-UB AUSLLJR 50PM6700-UB AUSLLHR 50PM4700-UB AUSYLJR 50PA6500-UG BUMLLJR 50PA6500-UA AUSLLUR 50PA6500-UA AUSLLHR 50PA5500-UG AUSLLJR 50PA5500-UG AUSLLHR 50PA5500-UA AUSLLJR 50PA5500-UA AUSLLHR 50PA450C-UM AUSYLHR 50PV400-UB AUSLLHR 50PV400-UB AUSZLHR 50PV400-UB AUSZLUR
Purchase a new LG 70' Smart with Alexa LG tv here under $900! amzn.to/30bLkki
Facebook : / techielife0
LED tester : amzn.to/376EmUL
Shot on OnePlus6t 4k 60FPS : amzn.to/3nk7Rru
Want to make Money with crypto?? Join me : mymticlub.com/?referral=techi...
Need to buy some bitcoin?$5.00 referral link : www.coinbase.com/join/morale_... 
Хобби
![[BLACKSWAN] ‘Roll Up’ Official Music Video](http://i.ytimg.com/vi/ulvCwyKrwqw/mqdefault.jpg)
My TV does the same, it will occasionally stay on for 30 minutes or so, great pic on it too, BUT! it starts clicking away after that, You are good! I wish you were here to fix my TV LG plasma
DUDE!!!! This worked..
I had this TV sitting in my office on the floor for about 2 years now. Just turning on and off. I knew that it had to be a power issue but had no where to start.
I think my TV Broke before you put up this video, because I googled like crazy to find an answer.
Anyways the TV I moved from a guest room to my bed room to replace the LG with 2 years ago just blew it's bulb, so I figured I would look again and found your video.
I have the 5500 model (no difference other than size) and I said.. NO WAY CAN IT BE THAT EASY.
I ordered the J233 from ebay 2000V version (blue one)
It came yesterday. I took out the 30+ screws and did the simple DESOLDER and RESOLDER.
Sure enough FIRED RIGHT UP.
Used the TV for like 4 hrs last night - works great again!!!
You get a huge like from me.
Thank you so much for posting this video. Saved me a $600 TV that was just taking up space on the floor in my office.
Great job! It's good that you didn't just toss it out. Just got it last you a while longer. Please subscribe!
Thanks for the great video. My 2012 LG Plasma started turning itself and clicking just over a week ago. I watched your video, ordered a new higher rated capacitor and bingo! it's all working again. Thanks for the very clear advice. Local repair shop said they don't even bother to repair plasmas any more which is disgraceful, when a $5 fix is available.
Great job! Nicely done. Glad this help you.
This fixed my tv and saved me from either buying a new tv or replacing the whole power supply board. My cost was $7.00 and about 30 min of time. Thank you for taking the time to record this and help me and I’m sure several others save money and reduce waste. Thank you.
Thanks for the comment!
Where do i get that part that he replaced mine is doing the same thing.
Thank you for the illustration, was ready to scrap this TV! I have the same TV as in your video but evidently mine has an upgraded main board! Looking at the board there were two bad capacitors which could be seen very evident to the eye. Replaced the capacitor’s cost for them was six dollars for the pair! Thanks again!
Sweet. Well done thanks for the comments
I have an LG OLED55C7P with similar symptoms except the clicking occurred at a much quicker rate - once a second or so. I couldn't see any bulging capacitors so replaced the whole board (about $130 + shipping from Sears of all places). That fixed the problem. Thank you for posting this video.
BTW, the problem was due to a lightning discharge very close to the house. I was using a surge protector (3,940-joule rating from a big name manufacturer) but it apparently wasn't enough. I also lost a wifi router on that power strip. But didn't lose the sound bar, 3 Apple Airport Time capsules and an Echo dot on the same power strip so glad for that. I will be beefing up the surge protection and unplugging the power strip whenever I'm away for any length of time. This area in mid-Florida seems to get a fair bit of thunder storms.
I have a LG OLED 65B7 with clicking every second and not turning on. Does sometimes turn on after it was unplugged. Would be interesting what the actual failure is since those boards are expensive and hard to get 😞
This worked!!! Saved me from buying a new TV. Used the same blue capacitor $8 on eBay. Thank you. Thank you!
Well done!
Thank you for sharing, nice pace and explanations. My decade ol plasmafire just started to behave like this so this video brings hope.
Till I had checked every single capacitor but it never crossed my mind to look at that one for bulging and low and behold it was both a little bit. I'm about to order one now. Thanks for the video.
Dave Snodgrass good luck.
Dave ... did the new capacitor/relay blue thing fix your problem? I have 60 PN5000 that started turning on then off and then it repeats. Some times I will see the input source blink HDMI1 then go away. I will check my capacitors later today
Most informative. Helpful to know that capacitors are not always round. Could save a good unit from landfill.
THANK YOU! This was so easy to do! I ordered a soddering kit on amazon and the capacitator on ebay and just fixed my TV yesterday.
Nice!
What compacitor?
Thank you bro I've got same tv with same issue as your tv I haven't started to work on it yet but I know it will work thank you for this video I give you 10/10
If you do not find any bad components: Just re-solder all solder point for the large components. A common problem with boards being soldered using a solder bath is that the large components do not get heated enough, resulting in solder points with micro cracks after some years. Reheating of these points and adding some fresh solder fixed my power board for this TV :)
I've had this exact TV with the exact same issue sitting in my basement for over two years now. I was just about to throw it out when I searched to see if an easy inexpensive solution had been found. Then I found you! about $12 with shipping and 15 minutes and it's ALIVE! Thank you!
Well done! Please subscribe!
Isn't it great! I love RUclipsrs. I try to mend it where I can. If I can't fix it,I break it down down so that next time I will stand a better chance. It's all useful information. My plasma TV went in Feb I thought that I had binned it but I found it in a clear out. I fixed it yesterday. I'm on cloud nine. 😁
Wow thank you man.it was very formative and to the point.
Have exactly the same issue with a LG 60" plasma.
I'm 100 % sure that will be solved that way.
I was thinking could be a capacitor.
Thanks very much man.
Great job.
Thanks. Please subscribe.
@valicoco6332 did it fix?
Thanks, big time, #1 fix....appreciate your help and time...to show us.
Very Good someone just give me one of them TVs it was clicking on and off just like the one you was working on wow cant wait to get it fixed. thank you very much.
Now this is a repair guide! I watched 20 different videos and they all call them repair guides but all they do is replace whole boards, so it's not much of a repair its more part replacement. I don't count that as repair, dont care how cheap the parts are if all you do is just buy new ones, 😂.
you sir are a gentleman :) thanks for the tip!
yasser essiarab thanks for watching
Other that this capacitator, is it possible that the blue ceramic capacitators for high voltage get used after many years ?
i have the same tv, althought it seemes that the ceramic capacitators do not have any current, they seem dead.
well done bro really you have done a good explanation, thanks go head bro for more video
This is so awesome! I have this TV so I'm about to get on this project! Excited, I'll let you know how it works out 😁
Imma have to get real creative because this thing is heavy as hell but I have to lay it down n take of the bracket mind you I'm 125lbs 😂 this should be interesting
This is gonna be interesting because i just remembered this TV is 4000lbs n I'm 125lbs but I have to lay it down to take off the bracket but PGguyver is on a mission! ...
Gracias,muy buen video.
Good job u have saved a lot
thank you brother I had the same problem with my onto I wash your video thanks
thanks ur awsome homie from tijuana mexico u helped me out.
So cause of the failure was 22nF ceramic capacitor. Thanks for video!
saarike sure thing
dang!!! that"s simple.... thx (two thumbs up)
Very good video well done that is the problem I'm having with my LG oled curved screen
Ouch'!
Hey, thanks for putting this up. I've got the clicking as well, and after disconnecting all other boards from the power supply, I still get the clicking. Is this a strong indication that the problem is the power supply board, and not one of the other modules?
What is the name if this part so I can make sure to buy the right one?
Thank you
Really well done
Gracias por tu information continua por fabor
I have an LG plasma, I get sound but no screen, any ideas?
Thanks bro I've had my plasma since 2011 !! and same as yours it clicks and won't come on I will disassemble and give a go :) hail plasma tv lol
Good luck.. let me know how it goes.
thank you, the perfect solution to my lg plasma tv problem. this clicking symptom is very common problem on many LG plasma tvs. i followed it to fix my LG 50PA5500, made in 2012. also read several forums about it, problem is the C802 capacitor. i ordered replacement part from DIGIKEY for 95 cents and $4.99 shipping. tv is back for the attack in full working order for ONLY $6 and some time researching the problem, troubleshoot, diagnosis, parts, and repair. DIGIKEY part number 495-1360-ND, manufacturer part number B32652A7223J000, description is CAP FILM 0.022UF 5% 1.25KVDC RAD. polarity doesnt matter with this part, so it can be installed either direction on the power board.
Mine is same tv but it isnt clicking red light is staying on. And i see the green light as well but still no picture or sound now what do i need to do? Plz help.
Hi, pls is the indicator on the logic board supposed to be steady on as long as the tv is on? Thanks for sharing.
great tutorial thank you
Does this work on a 60pk550 model lg plasma?
Can you please direct me to a link for the right capacitor?
I cant seem to find it.
Any help would be appreciated .
Great job well done
Thank you!
223 is the capacitor value. I.e. 22 and 3 zeros in pico farads. So 22000pF or 22nF. Your replacement says 22n which is the same. Those caps are not polarized, if they were there would be some indication like a + or - printed near one of the pins.
Got a 60 inch LG plasma tv for free off of the craigslist free bee section. It was making the same clicking sounds as your plasma tv was so i replaced both psu boards with replacment boards off ebay. After that it was fixed. It ran like a champ hooked up my xbox 360 on it and played GTA 5 on all day. It ran great great no problems what so ever. Great video by way im certain it will help other LG plasma tv owners out there as well. My LG tv was made in 2008 so yes it is a older set but works great now.
Nice job!
@@TECHIELIFE Thanks man thers nothing like that feeling knowing you have successfully fixing and saving at one plasma tv from the junk heap.
@@terrybaptist795 yeah I love the feeling of fixing something others tend to lose hope in.
Thanks,
I will try on my TV
I have a similar LG plasma 2008 model has the same boards as yours I’ve got sound and everything turns on but no picture can’t figure out the problem getting all the correct voltages can’t see any capacitors bulgy
Thanks man!
Great Job
I just ordered the part from DigiKey. I'll let you know how it turns out. Thanks for the video!
Cool. Let me know please
@@TECHIELIFE Hey, sad to say, it didn't work. TV is powering on, but not picture.
I don't know where to look next, except for a new TV. Such a shame. Think you can help?
When I turn it on, the light on the main board stays on and the green light on the small board under the power supply board blinks, but still no picture. Not even snow. Where do you think I should look next?
@@bass4usall honestly I'm not sure. Plasma has many moving parts and it's hard to troubleshoot them.
@@bass4usallyou thought this specific repair would fix display issues? 🧐
That seemed easy certainly worth a try. My TV may come on ten just goes off on again switch to off at mains may have to do that 5 or 6 times then it will come on and be ok for the rest of the evening. Any idea or suggestions.
Thanks
Good morning sir , thank you, I just want to ask, after changing the MOSFET do you need to switch anything again
love it 👍🏼
I just watched your video. I have a LG plazma 60PA6500 with the red light clickand no power to. But I don’t see any swelling on the power board. Will it be the same black part on mine even though I don't see any swell. Or do you have a next step video?
Ok, so I watched your video. Appreciate your detailed description of the process.
So you mentioned to message you with similar issues so that is what I’m doing.
I have a 50” LG 50PT350-UD. Was working fine and one day it shut off. Tried turning it on and nothing. When I got close to the tv I smelled burning smell. I have the back off and plugged it in. Within second that smell came back and it’s not coming from the power board. It’s the largest board with a part number EBR71838901 that the smell of burning electrical is coming from. I have a infrared temp gage and a small ceramic rectangle part gets hot fast.
Anyway. Looking for suggestions as to what it might be. Can’t attach pictures
Appreciate it
Yep! Fixed my 50PA5500. Most likely it is the high voltage 22nF 1200V capacitor in the power supply. When caps go they tend to short circuit. In automotive electronics and high reliability circuits we use two in series. I replaced mine with a 22nf 2kv and all is good! Cost me $1.09 for part at Mouser part #B32672L8223J EPCOS/TDK. I wonder how many people have junked their LG plasmas. Similar problem with my Samsung LED, but 27nF 700V caps burned out. Replaced with 27pF 6kv from TDK part #
CC45SL3JD270JYVNA
good info!
Good job sir plasma tvs Good but very heavy 😕
Oxidation is killing you dude but great info!!!!
Yeah. Didn't realize you had to use flux at the time..
take this beer good man
Very helpful video, thank for sharing. From UK
Very Very well presented. It was just what the doctor ordered. Thank you so much!
Moe Goldhar
Hello! Hey...where do you buy your capacitors?
Where to buy the little box you repaired
whats the name of capacitor? and will it work on lg42 inch with same problem?
Mines doing the same thing where can I get the part from???
The “sucky thingy”. So technical. Lololol!
grazie mi sei stato d'aiuto :)
I have two lg plasma tvs. and they both have same problem. the remote will turn on tv. sound always come on. you can change channels. problem is picture may or may not turn on. picture quality still stellar when it does turn on. it will stay on once pic comes up. accidentally discovered picture will turn on if you walk away and leave the sound on. 10-60 minutes would be typical. used it this way for years. during those years there would be weeks or months when the problem not even there. lately one is taking waay to long to turn on. but I have a clue. wife has been tapping on back of tv to get picture to come on. man I love this tv. will reflow with fingers crossed and report back. my model is 60pa6500
Can it work on a 42pt250r
I heard that diode T304 goes bad alot on the 50pj350
😂 that noise scared the shit out of me . I thought it was blowing up 😅
Thanks Techie Life. I have the same TV with the very same problem. I replaced the PSU board with a new one ($70), but no joy. Problem persists. All capacitors look good on the other boards. Any last hints or recommendations before I scrap this thing?
Try y sus board
I found this TV in the trash last night and this is what it's doing is turning off and on just like you described I'm about to go try it out change out that cap and see what happens I'll keep you posted thanks for the video
Robby Baxter what’s the turn out?
Hello sir i need same capacitor where i can buy from!!
Where can I find that part
Thank you for this video, this what my tv is doing. Where can I find that part that you replaced?
Thank you Awesome video! Where did you buy part? I have a Z50PJ240-UB with the same clicking problem.Just got it tonight for free,people throw everything out and I fix it if I can.Got new sub,thank you
BigMike&Country I bought the parts on eBay. Just type in the model number. Almost all the time, clicking would be a capacitor.
Do you know how to test capacitors,none are bulging,I know problem is on power board somewhere,I disconnected the other boards and it still clicks,maybe its a fuse.I'll have to use meter and start checking.
BigMike&Country I have a capacitor tester.. same as an led backlight tester. But other that that, I usually look for bulging or fat capacitors.
I am trying to fix my 2006 Samsung 50 inch. Other than the immense power it uses I adore it. I detest LED’s.
My problem is a bit different. It makes the clicking noise on and off 6,7, maybe 8 times, like it’s really trying to fire up, and then eventually it finally fires up but it acts like it’s struggling to produce enough power to run it for maybe another 10-15 seconds after it finally fires up. Then Once its running for a bit it’s actually fine. I know one of these times it just won’t fire up. I’m trying to fix it now before it’s toast.
I change that part but it still clicking and does not turn on
Hi, thanks for the video. I took out my power board, and found the same capacitor, but it doesn't look abnormal (bulged) anywhere, nor does any of the other capacitors as far as I can tell. Do you think I should just go ahead and order a replacement for this particular one, and take a chance?
sometimes they look "normal" but are internally fried. look at the link i posted in this thread to another person.
Thank you for the informative video, where would I go about obtaining the capacitor mentioned?
I tried googling "22nj 700 VAC capacitor" and nothing that looked like the cap in the video came up. Thank you.
Look on eBay
Hi there, where can I source the capacitors? Do they have to be specific to the LG TV range or will any make do?
Any make will do. I usually go to eBay
Good evening . I have a LG plasma as well that a client had given me today the light turns on and clocks as well but I don't see an image appearing . Would it also be the reason for it being that the previous owner left the pin inside where the antena goes .thanks for your great videos .
If the clock stays and doest move then it may be the main board.
Ours I doing the samething it happened a few months back we switched the outlet and it continued to work, well last night when this happened I unplugged it all night, tried it again this morning switched outlets and still the same.... so when I'm able I'm gonna give this a try.... and hopefully it will work... but currently we are out a tv now sooooo, we have a smaller curve I don't really like the picture on the curve I like the lg plasma way better but guess I'll have to get us to it for now....
What is that small thing that was the problem i am trying to fix my tv but can't find what it's called
No sound picture is ok wat could be the problem
Mine sometimes comes on, but then will randomly turn itself back off, and then, trying to turn it back on this results in clicking, but no picture.
Question:
Panasonic TH-50PZ80E
It's not turning on. After blinking green, it goes to a blinking red light.It still 'clicks' nicely as it's always been doing, so it seems very healthy, and there's never been any issue with the image. It just doesn't turn on. For a while, it helped to hold a remote button pressed to help it 'wake'. But it worked less and less. As if it gradually struggled to be turned on.
Any ideas on this is greatly appreciated.
(A local tv rep. guy diagnosed it as being 'something' with the main board.)
But he didn't say what. I think he wasn't able to diagnose it as it is many small components.
Sorry, I'm not able to help Panasonic is one of the brands that I've never worked on.
@@TECHIELIFE Ok. Thanks for the reply though
hi can you recommend where to buy the capacitor for Lg 50pk750 -ua power supply
1200 volt
set will not turn on
thanks
like you videos
I purchased mine on eBay.
Mines kinda like that but it stays red sometimes it does turn on but for some reason it's just staying lite
@TECHIE LIFE the clicking on my TV happens occasionally. It doesn’t happen repeatedly like the one in your video. Would it still be the same capacitor you showed or something totally different?
I would definitely open it up and see any capacitors bulged
TECHIE LIFE thanks for the reply. Much appreciated
@TECHIE LIFE just wanted to say thanks to techie life and this video along with the comments. I did exactly what the video said to do even though I didn’t see anything visually wrong with the capacitor, I still decided to change it and sure enough it worked 🙏
@@FIithyDisco glad it worked!
Hello i dont see this one or any other physically bulging is it more than likely gonna be this one?? Thanks for your help in advance
If it is the same model number, probably yes
I have a Samsung LED TV: I had a premature start premature failure
of my TV, t when disconnection completely for 1 hour, the image was
turned on and everything worked perfectly. so I made a reflow of the
main board (nothing, no change),...Even if normaly if you do a reflow on
t Con it's because you have only issue pciture. But I made a reflow of
the con con (since then, nothing lights) ... ref con con: DEL T370HW04
V2 37T06-C00
so the polarity of the cap doesnt matter? im confused
Yes it does.
i see you reply to buy the parts on ebay, in a big city would you be able to just go buy the parts and what kind of store would carry the part
You may be right. I have a small shop that carries some electronics, but this ship is almost 10-20 times the price of normal electronics. Also they won't always have the exact one you need. But there's not really any stores like radio shack left. So that's why I say eBay. Its fast and easy.
What would be your next step if all the capacitors looks good but know one is out somewhere?
I would use a capacitor tester, but that would mean I have to take the capacitor out of circuit. Although I have heard that you can test the capacitor with a multimeter while still on.
Hello Just a quick question is the Clicking sound coming from the power board ??? Cause mine is coming from the power board.
Yes it is.
Try disconnecting the X-Y sustain power connector, if the PSU stays in likely the Y sus is shorted.
So hey, I can't get the cover off. It's a LG plasma 32PC5DVC_UG. My brother and I took off all the screws, but something is stuck right under the plug ins.
If anyone has any tips, please reply. I'm not good with technology.
hey inbetween the plugs i thing the vga ones is another screw.
I have a lg 50PA5500 no picture and clicking noise