Hi Sir my 55pus6703/12 6870c-0535b I have backlight and sound. When I disconnect on strip line I get half of screen only white. ia this about t-con board?
thanks to this, i learned that i sadly need a new TV ;( it sucks more because i got a 50" Phillips TV with ambilight for about $400... which was about 50% off at that store... and the backlight just *poof* died...
What if the picture goes off intermittently? For a while now, the screen has blanked out to black (with sound still going) a few seconds or even several minutes after turing it on from standby. Turning it off with the remote, then turning it on again would fix this after a few tries. Sometimes the screen would then stay on for hours, sometimes it would turn off again after a few minutes, or maybe within half an hour. Recently however, no matter how many times I turn it off and on again, the screen only stays on for a minute. I doubt it is the screen or backlight, it seems to be related to powering on and standby. While turning on, the diode switches from red to white, and it pulses between weak and strong white light, sometimes it keeps doing this for a long time.
I've got the blue screen too, and it randomly works every few weeks. We'll just turn the TV on, and then it works until we turn it off again. Or it shuts off, and then it doesn't turn on.
I have a question for you I got a Philips flat screen T.V with sound but no picture. I toke it to repair and he changed the control board. The T.V will run normally for whatever time until you turn it off and then turn it on again. It will be back to the same problem, sound but no picture. Do you have an idea what could be the problem?
any advice about my 55pus6703/12 6870c-0535b I have backlight and sound. When I disconnect on strip line I get half of screen only white. is this T-CON board?
Question - my TCon board shows picture on half the screen on both sides when you unplug either cable. I got a second hand TCon board but that one only shows image on 1 half with either cable unplugged? Is this a problem with the replacement TCon board or perhaps something else?
hello i have a philips TV have a issue when i switch on the TV the pannel is working main board has two green lights showing but pictures in the beginning there was a full vertical line issue i changed the T-con board but still no picture only a black screen but the pannel is working i hope because i have checked half screen test with tcon then i get white screen on the half i tried with both sides i got half white screen on both sides i have tried changing ribbon cables but still no picture the backlights are okey working perfectly a permannent line on pannel that is also showing so i think pannel is also, can you help me to find asolution for this how i can find the solution for this. it is 65 inch philips smart tv 2019
My problem was lines on the screen on and off then it just showed blackscreen after a few weeks. I unplugged one of the ribbon cables from the T-con got white screen on half screen and picture on the other half, did the same with the other ribbon cable and got it reversed, then i plugged both back in and got the black screen. is this a T-con problem then, should I just replace it? Could it be somthing else?
My tv quickly flashes the Philips logo when I switch it on, then goes black, there is sound and when I shine a torch at the screen there is picture. What could cause the back light to go out? It obviously still works if it’s on for a split second when I start the tv. Thanks
@@mariusconstantin7569 no using spare tv for now, after a month of leaving it. Tv came on and worked fine for about ten minutes then backlight stopped again and it went out.
exactly the same thing here u got something write me back if u had a solution pls im thinking opening it up and i wil but u know id like to now for sure so i wont take unnecesary risks
My TV suddenly went dark when I was watching Netflix...I use torchlight and I see the images... I've put my TV ambient light off.. Please tell it's easy to fix 🙏
Read the full article: www.lapseoftheshutter.com/philips-tv-sound-but-no-picture/
Hi Sir
my
55pus6703/12 6870c-0535b
I have backlight and sound. When I disconnect on strip line I get half of screen only white.
ia this about t-con board?
Excellent overview of the problem, easy to follow by non-tech guy (ie me !), I feel very confident I can fix my problem Thanks once again 👍
Thank you so much for the great work. I have zero experience and found out what the problem was. T-con needs to be replaced. Thank you 🙌
Thank you for all the tips!
For me, unplugging and re-plugging all the cables fixed the issue.
thanks to this, i learned that i sadly need a new TV ;( it sucks more because i got a 50" Phillips TV with ambilight for about $400... which was about 50% off at that store... and the backlight just *poof* died...
Casting this on my broken Philips. Atleast the sound is ok.
Thank you so much for this clear guide!
Thank you for the info. The hard reset did the trick
What if the picture goes off intermittently? For a while now, the screen has blanked out to black (with sound still going) a few seconds or even several minutes after turing it on from standby. Turning it off with the remote, then turning it on again would fix this after a few tries. Sometimes the screen would then stay on for hours, sometimes it would turn off again after a few minutes, or maybe within half an hour. Recently however, no matter how many times I turn it off and on again, the screen only stays on for a minute. I doubt it is the screen or backlight, it seems to be related to powering on and standby. While turning on, the diode switches from red to white, and it pulses between weak and strong white light, sometimes it keeps doing this for a long time.
awesome video, thnaks mate
Hi, there.
If my TV shows the Philips logo when I turn it on, should I try this 6 itens or is it any other point to check?
Thank you!
Regards from Rio
My Philips 58pus7805/12 has no pictures but the screen is still blue-ish. Any advice? Sound and surround lights are working
did you get it to work? same problem as me
I've got the blue screen too, and it randomly works every few weeks. We'll just turn the TV on, and then it works until we turn it off again. Or it shuts off, and then it doesn't turn on.
@@th3o159 same problem as me. 😢#sadfaceemoji
I just got that problem
@@th3o159please did you solve this?
I have a question for you
I got a Philips flat screen T.V with sound but no picture. I toke it to repair and he changed the control board. The T.V will run normally for whatever time until you turn it off and then turn it on again. It will be back to the same problem, sound but no picture.
Do you have an idea what could be the problem?
any advice about my 55pus6703/12 6870c-0535b
I have backlight and sound. When I disconnect on strip line I get half of screen only white. is this T-CON board?
Its work, thank you
Question - my TCon board shows picture on half the screen on both sides when you unplug either cable. I got a second hand TCon board but that one only shows image on 1 half with either cable unplugged? Is this a problem with the replacement TCon board or perhaps something else?
hello i have a philips TV have a issue when i switch on the TV the pannel is working main board has two green lights showing but pictures in the beginning there was a full vertical line issue i changed the T-con board but still no picture only a black screen but the pannel is working i hope because i have checked half screen test with tcon then i get white screen on the half i tried with both sides i got half white screen on both sides i have tried changing ribbon cables but still no picture the backlights are okey working perfectly a permannent line on pannel that is also showing so i think pannel is also, can you help me to find asolution for this how i can find the solution for this.
it is 65 inch philips smart tv 2019
My problem was lines on the screen on and off then it just showed blackscreen after a few weeks. I unplugged one of the ribbon cables from the T-con got white screen on half screen and picture on the other half, did the same with the other ribbon cable and got it reversed, then i plugged both back in and got the black screen. is this a T-con problem then, should I just replace it? Could it be somthing else?
My tv quickly flashes the Philips logo when I switch it on, then goes black, there is sound and when I shine a torch at the screen there is picture. What could cause the back light to go out? It obviously still works if it’s on for a split second when I start the tv. Thanks
Have you fix it?
@@mariusconstantin7569 no using spare tv for now, after a month of leaving it. Tv came on and worked fine for about ten minutes then backlight stopped again and it went out.
exactly the same thing here u got something write me back if u had a solution pls im thinking opening it up and i wil but u know id like to now for sure so i wont take unnecesary risks
50PUS6162/12 ?
My TV suddenly went dark when I was watching Netflix...I use torchlight and I see the images... I've put my TV ambient light off.. Please tell it's easy to fix 🙏
You must change the backlight.
What if the light is blinking but still not turning on
I have a white screen ,no picture .has sound.
Space running out