Mounting mirrors on the wall of my home gym
HTML-код
- Опубликовано: 13 сен 2024
- In this video I mount 3 3'x5' mirrors in my gym. pretty easy to do with some simple tools.
Mirror: www.homedepot....
J-channel I used in the video is discontinued, here's another potential option from Amazon:
amzn.to/3RrvL6q
Basement Finishing Playlist: • Basement Finishing Pro...
Loving this look! Would have truly appreciated such know-how when doing this at our French house. Definitely take this on if & when we take on such a project again.
It really adds the feel of extra space 🙂
You had the Canes playing in the background so I'm definitely liking the video!
I also have 3 3x5 mirrors and had only the small clips you used on top and came to conclusion there has to be a better way and voila found your video. Way to be there for me lol
Glad I could be there for you 😂
Thank you for this video! Was wondering how to do this in the future !👍👍👍
👍
Thanks. I have a big 80” x 48” mirror I just hung using the 72” j-mold from HD like you did in the video. I didn’t buy 2 of them and just centered it and drilled straight into 5 studs.
Nice 👍
What screws did you use because the supplied ones don’t seem strong enough
@@willlopez7875 I'm assuming you mean for the J channel, I used 1.5" wood screws into the studs
@@PlatoonGarage yep, sorry didn’t specify. The holes on my J channels aren’t lining up. Had to get wall anchors. Starting again tomorrow, hopefully one goes into a stud at least. Lol
How heavy was that mirror? I am currently trying to mount a single mirror with those dimensions, and it is a beast
thanks for making this video, it helps me a lot💪
You're welcome
Thanks man, just what I was looking for.
My vote is install them to be centered with the exercise area, not the walls/soffits themselves. But also, I probably would've installed them long side down in a 2 wide, 3 high configuration (if it's a 9ft+ ceiling like what it appears to be). That way you'd make the most of the space on the wall and get lots of mirror area for when you're using the gym. Of course, that would double the cost of mirrors, but I think it would be worth it in the end.
Great video though! I've been following along the whole series and have enjoyed all of it!
not a bad suggestion. I'll have to see what it looks like when I get the rack delivered and set up. the rack will be going dead center of the mirrors as they are. If it doesn't work - I might pull the mirrors down and reconfigure
Thx!!! Have same mirror sizes. This helped a lot!!
nice video, they don't sell these in Canada so I'm planning a drive over the border to grab some of these lol
@@shellderp that's probably what I would do too
2:45, literally went looking for a video of someone hanging these mirrors because of this issue - so weird!
Definitely a conspiracy between the mirror and J channel manufacturers to anger consumers
Very clean. Great job. I can't wait to start on mine. House being built. 1 more month.
Very helpful, thanks!
Thank you sir!
Very helpful video, thank you! I'm getting ready to convert an old playroom into a gym and so this is great. Do you know what paint color is on the walls? I like it!
Web gray and gray screen both are from Sherwin Williams
Would love to see the finished gym whenever you have a chance!
here's a link to the video: ruclips.net/video/KybL1ml_muk/видео.html
How many J molds did you use for the 3 mirrors total?
Nice video. What is holding the top of the mirror? Also assuming the j bracket was purchased separately? Thanks!
J brackets purchased separately yes. The mirrors came with small clear clips to hold the top firmly
Thanks for the video! I just purchased the same mirrors - 2 instead of 3 - and the same type of J channel. I followed the exact same process, but there is a slight gap in between the mirrors once I have them sitting in the J channel. The gap is not even; the mirrors are flush at the top and the gap gets larger towards the bottom of the mirrors. Any ideas on the cause?
Hmm, everything straight on the installation?
Maybe the mirror glass was cut crooked and they don't align from top to bottom. Mine fit perfect even now over 6 months later
@@PlatoonGarage maybe remove the J Track and instead level up mirrors using just those plastic clips they sell..you likely will see this a lot less than a gappy installation with a J track..just an idea.
Great video! what screws did you use for the J channels?
I just used regular old wood screws 1.5"
Thanks!!
Thanks for the video. I think ingot the same J channel from home depot with the center rib at the bottom of the channel. I also purchased 2 of the 3' x 5' mirrors to be placed side by side on the 72' j channel. My question is do the mirrors sit tilted back against the wall or are they flush? Also i see you didnt use any epoxy or glue on the back of the mirror, do they wobble as a result? Thank you
The mirrors sit ever so slightly tilted back against the wall, we're talking like 1/8" so very small amount. No epoxy needed, if I ever take them down there's no need to scrape glue/epoxy off the walls.
If you mount everything correctly (and assuming your wall is straight) there is no wobble at all. 👍
@Mitesh Did this setup work for you? The 72" J channel says it's it can only support 50LBS. 2 3' x 5' mirrors weigh in at 62LBS. All comes from Glacier Bay, you would think they'd make sizes and weights compatible.
At the top, when you used the plastic pieces it came with, did you use any drywall anchors? Did you screw them into the studs, or what? Just a screw straight into drywall?
Just a screw straight into drywall. All of the load is being taken by the J channel, this just gives some added stability
Awesome, ty.
Working on setting my garage now.
Nice!!! 🙌🏽🔥
Thanks
Can you tell me what paint colors you used on your walls? I’m looking for a similar color pattern and yours look great.
Web gray and gray screen both are from Sherwin Williams
Hey Man
I have exactly what U have in this video.
The thing is my walls have steel studs as my gym is in my storage building.
My Question is can I put the 3 mirrors and
J channel up without screwing into the studs???
Will the drywall hold the mirrors and J channel if I just screw into the drywall with the plastic drywall hook screws?????
Thnkx for your help!!!!
These mirrors are pretty heavy. I suppose you could use drywall anchors (and a lot of them) and see if it holds.
Why not just drill into the metal studs and anchor with metal screws?
Thanks for the vid, I’m hanging a heavy mirror with no frame and couldn’t figure out what I needed to mount it. Also love your socks
Awesome, glad it was helpful. 😂 Glad you like the socks too!
Been following your build as we're finishing up our basement right now too (unfortunately not myself) and this is another great cost effective idea I'll be copying! Looks like you installed them 2' from the floor and ceiling since you have 9' ceilings? Have you been happy with the placement and size of the mirrors overall now that you have had them in use for a while?
Sorry I missed your comment, I've been really happy with the mirrors. I actually wouldn't change a thing 👍
Nice video, what J Channel and what did you use at the tops of mirrors to hold it please?
Thanks for watching. No J channel at the top, just the clear mirror clips that came with the mirrors
Did you need wall anchors for the screws in the jbar and top mirror clips?
No wall anchors needed. The screws in the j bar go into the stud and the top clips are not load bearing 👍
I'm getting ready to install a whole wall of mirrors in my loft, I took the metal frames off of sliding mirror doors and they are giant and weak 😅 this helps a lot. I believe I will have to "stick" my mirrors to some kind of MDF of chipboard to make them less weak?
Also, I don't have wood beams, I have metal Instead.. I'm wondering how to go about this 😅 would you have any recommendations? Thanks a lot for that video!
(Sorry, English isn't my first language)
sounds like a very different installation than my mirrors, not sure i have any advice to offer you
Are they not more dangerous without a glue backing that would act to hold sections/fragments of the mirror in the event you hit and crack them while working out in a gym?????
I guess dangerous is relative, there is pretty much zero chance of me hitting the mirror the way things are situated in my gym.
If breaking the mirror in your gym worries you, then maybe gluing them to the wall would make you more comfortable. I'm good this way
Awesome video! What is the paint color for the light gray?
Both are Sherwin Williams colors. Dark gray is called web gray. Light gray is called gray screen 👍
Do you remember what you used to cut the J-mold? I'm trying to do the same set up and need to cut a 1 foot length, but I'm concerned I won't get a straight/flush cut with my existing tools.
Yep I used a hack saw with a fine tooth metal blade, perfect cut. 👍
Favorite “hang a mirrow video”! Did you put screws into every hole of the J mold or just screw when the hole coincided with the studs?
Thanks!
Only where the studs were👍
@@PlatoonGarage Thank you!
Is it difficult to line up the holes of the J mold with the studs?
The holes don't need to align perfectly. Just put a new hole in the j mold where a stud is and it will be fine
Hi there, what kind of floor is it u've got there?
greetings, check out this video, it has a link to the flooring: ruclips.net/video/egDkq0Jaws0/видео.html
What is that laser device you are using? to measure? I need that!
It's a laser level, made by Bosch 👍
I bought the j mounts but they don’t come with screws. What size screws did you get to make it work? The screw holes are extremely small. Please help!
And how far off the ground did you start the mirror base
1.5" wood screws will do the job. Measure your ceiling height and do the calculations to get the mirror centered on your wall, or you can mount them higher or lower based on your preference 👍
What did you use at the top to hold the mirror in place?
The mirrors came with small plastic clips and screws
I like it all except using the clips (ugly), at the top. Does anyone know of a top rail type bracket?
What size screws did you use? The ones that came with my J-Mold seem small and weak.
1.5" wood screws
Super helpful video! When you drilled through the smaller holes on the J channel, what size drill bit did you use? And was it a special drill bit?
Just a normal drill bit, I picked a size that was just slightly smaller than the screw I was using
@@PlatoonGarage got it, thanks!
@@SushiLeader 👍
@@PlatoonGaragehow long were your wood screws?
@@em0haircutx 1.5"
You only use the clips came with mirrors to secure top edges?? No mirror glue at all? If so, are they secured enough? Thank you for your help. I'm getting ready to get some mirrors installed in my home gym and got a quote from professional company for rough 3800 bucks for 127inch wall and 157 inch wall at 72 inch tall. Found your video and this could save me so much more money doing it myself. Thank you for your help!!
Correct, secured at the top only by the included clips. Completely good to go.
Do it yourself and then treat the family to a nice dinner with the money you save
@@PlatoonGarage awesome!! Thank you very much sir! You have a wonderful day!
@@AnThePersuasion cheers
What color is the darker wall? Looks great
Web gray from Sherwin Williams
Novice here, Does the J mold need to be drilled into studs?
You drill it wherever a stud is behind it so the screw goes into wood
Got it! Thanks!
Are these just glass mirrors or do you recommend tempered glass?
I think these are just regular glass
Did you go into the studs with the clips at the top of the mirror? Also how many inches from each edge for those clips
clips at the top did not go into the studs. all of the load is being held by the J-channel so the clips at the top are mainly to keep them from falling forward. clips were installed 5" from the edge on each side
@@PlatoonGarage is your 1ft section in middle secured on a stud? How many screws for that section?
@@johnfrick7898two screws in the 1' section. One in a stud and one into drywall. Most of the load is held up by the two outer sections of j channel
What u used on the top to hold the mirror ?
The mirrors came with small plastic clips and screws. I used those
How did you mount the j channel that holds the bottom of the mirror?
Thanks
Wood screws
hey so i recently bought a 98x48 inch mirror and i dont know how to install it. ive seen videos telling me to buy split battens but can you link me to some that would be appropriate for my mirror
I'm not a mirror expert for sure, I don't know if there are extra precautions that are needed for a mirror of that size.
What did you use to secure the top.part of the mirror
Top mirror is held in with a small clip and a screw that was included in the package
@@PlatoonGarage did you screw the top part into drywall or studs?
@@mikeworkman1759 tip part is screwed into drywall 👍
Which mirrors are these? Where can I find them?
@@carmenainsworth771 description has info
Do you have a video of how uninstall the mirror??
Unfortunately no
Did you put mats on your floor? If so, what kind?
Yes, check out this video - ruclips.net/video/egDkq0Jaws0/видео.html
It shows me installing the flooring and there is a link to what I used in the description
I would have measured off the two soffits for my vote. In the end no biggie either way.
What is the distance between your studs? 16” or 24”
16"
I have shallow and deep jbar I am installing mirrors. Any tips or advice?
Just go slowly and make sure your measurements are good. Good luck 👍
@@PlatoonGarage thank you, I have 6 mirrors to hang. Job was dropped on me.
@@richienussbaum4033 👍
@@PlatoonGarage thanks for your video, I got it all in
@@richienussbaum4033 awesome! Nice job
Unfortunately this j trim is discontinued. None of the others hold this much weight, going to have to use clips
didn't know that the j channel was discontinued. i looked up another option on amazon and this one looks promising. amzn.to/3RrvL6q
How high did you set the mirrors?
22.5" from the flooring
So you figured mastic was not necessary?
Correct, for my installation I did not use adhesive
Where did you purchase the J bars and mirrors?
It's in the description 👍
How is the top of the mirror being held in place
The mirrors came with plastic clips to hold the top secure to the wall
What type of nails did you use on the mirror mount??
1.5" wood screws from your local hardware store 👍
@@PlatoonGaragewhat size of the screw? #4 or #6? Thank you!
@@ouningzhang7768 6
can we just use the clips on top and bottom instead of the channel?
You could. But the channel will be stronger
What are those top mounts that you used called?
The clips used to hold the top of the mirror are just clear plastic clips that came with the mirrors in the box
is this in your basement in Colorado?
Virginia
Can you put a list of everything you need!
really straight forward, get the mirrors - the box contains the clips and screws to mount the top. then get a "J" channel at the link in the description. Use some #8 1.5" wood screws to hold the J channel to the wall and that's it. You'll need a screwdriver and if you're fancy a laser level to mark out where the J channel goes. good luck
@@PlatoonGarage were anchors needed for top clips?
@@mightysyng8302 yes, the plastic clips to secure the top were included in the box, but they can go anywhere and don't need to be in a stud
How thick is ur mirror?
Between 1/4 and 3/8"
How did you get it home without breaking
The mirrors are packaged in cardboard really well. I brought them home in a truck
Thanks for the quick reply! We're you able to stack them on top of each other I am assuming?
@@taylorlan3754 yep, stacked right on top of each other
What are you mounting the top with..
Plastic mirror clips that came with the mirrors
What did you put at the top of the mirrors?
Small plastic clips that came with the mirror
@@PlatoonGarage well poopy I ordered a mirror and it just came.with glass nothing else haha, it's just rose clear plastic squares with a screw hole right? Haha trying to self install, I got the bottom bracket and got know to stud it not drywall it.
@@wecomefromboatswecomefromb7770 Yeah just small clear plastic clips with a screw hole. Nothing fancy
@@PlatoonGarage thanks a ton, subed
Which screws did you use? The ones that came with mirror? Also what drill bit did you find fit the molding precut holes?
For the top part of the mirror, I used the screws that came in the box. For the J-channel I used 1.5" wood screws.
The drill bit I used was one size smaller than the screw width, but was bigger than the predrilled holes, I just drilled through and made it larger
@@PlatoonGarage is the width a number 8?
@@IsaacLop2011 I can't remember and I don't have any left. It was either #6 or #8
Ok cool thanks!!
Can hear you with the music on the background
You don't show how it is secured at the top.
Did you watch the video? It's in there at 5:45
I can see you screwing something at the top but can"t tell what.
Standard mirror clips. Came with the mirror, clear plastic
@@PlatoonGarage thanks
Too far away, can see what your doing, poor video