How to Replace Fuel Pump 2004-2015 Nissan Titan

Поделиться
HTML-код
  • Опубликовано: 9 ноя 2022
  • Buy Now!
    New Electric Fuel Pump from 1AAuto.com 1aau.to/ib/1AFP...
    This video shows you how to install a fuel pump on your 2004-2015 Nissan Titan. Combustion engines need three things to operate: fuel, air, and spark. If your fuel pump isn’t delivering the fuel your engine needs, it will run poorly, or not at all. Or, the pump is fine, but your fuel gauge isn’t working.
    This process should be similar on the following vehicles:
    2004 Nissan Titan
    2005 Nissan Titan
    2006 Nissan Titan
    2007 Nissan Titan
    2008 Nissan Titan
    2009 Nissan Titan
    2010 Nissan Titan
    2011 Nissan Titan
    2012 Nissan Titan
    2013 Nissan Titan
    2014 Nissan Titan
    2015 Nissan Titan
    Tools you will need:
    • Phillips Bit in a Ratchet 1aau.to/taK/1AX...
    • Pry Bar 1aau.to/tGZ/1AX...
    • 10mm Wrench 1aau.to/tM8/1AX...
    • 17mm Wrench 1aau.to/tM8/1AX...
    • 10mm Socket 1aau.to/taUv/1A...
    • 12mm Socket 1aau.to/tbvi/1A...
    • 17mm Socket 1aau.to/tbvi/1A...
    • 21mm Socket 1aau.to/t8Y/1AX...
    • Air Blow Gun
    • Air Compressor
    • Needle nose pliers 1aau.to/tvu/1AX...
    • Needle nose pliers 1aau.to/tvu/1AX...
    • Straight Cutters
    • 1/2 Inch Air Impact Gun 1aau.to/tnL/1AX...
    • Ratchet 1aau.to/ta2E/1A...
    • Socket Extensions 1aau.to/tbvi/1A...
    • Torque Wrench 1aau.to/tagm/1A...
    • Drill
    • Cloth Rags 1aau.to/twP/1AX...
    • Gloves 1aau.to/txm/1AX...
    • Rust Penetrant
    • Safety Glasses 1aau.to/trI/1AX...
    • Wire Ties
    • Brass Punch
    • Floor Jack 1aau.to/tKx/1AX...
    • Jack Stands 1aau.to/tG3/1AX...
    • Pick 1aau.to/tBH/1AX...
    • Rubber Mallet 1aau.to/tfb/1AX...
    • Wheel Chocks
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
  • Авто/МотоАвто/Мото

Комментарии • 21

  • @TRQ
    @TRQ  Год назад +1

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @vlo9079
    @vlo9079 3 месяца назад +3

    Very nice video. This definitely assured me that I'm going to let my family mechanic change my pump.👍

  • @theaceman2507
    @theaceman2507 2 часа назад

    Thank you. Well instructed, very informative. Nice job cause not everyone can teach.

  • @docholliday2961
    @docholliday2961 10 месяцев назад +9

    You're always on the dot . But personally I rather make a nice square cut to my bed in position to the top of the pump and replace the complete assembly instead of just the pump motor. 👍

  • @user-no9lr8mn6y
    @user-no9lr8mn6y 19 дней назад

    Love the step by step! Thank you!!!

  • @ColinQuinnuniverse
    @ColinQuinnuniverse 5 месяцев назад

    Very thorough explanation with lots of helpful tips for first timers.

  • @nazikhamdan5316
    @nazikhamdan5316 4 месяца назад +1

    I have a 2010 Nissan Armada. There's no need to drop the fuel tank. I don't know which model shown in this video, but mine has an access panel under 2nd row seat on driver side. You can even tap on the carpet to feel its location. You have to cut thru the carpet, but that's way easier than dropping the tank. After you remove the panel cover held by 3 nylon tabs (clockwise to unlock) you'll see the pump. The locking ring does not have a metal cover as shown in video. Its best to use a tool for the ring. Mine was very tough. I couldn't do it with hammer and chisel. Even with the tool, the ring was on so tight, it bent with me.

  • @mikhailyuren6781
    @mikhailyuren6781 Год назад +4

    Is it easy to remove the bed u save bunch of time

  • @rayray9777
    @rayray9777 11 месяцев назад +3

    15:50-15:55 looks like you got to close to the wire and slightly cut the jacket on the wire

  • @user-fh7dn4iw9t
    @user-fh7dn4iw9t Год назад +1

    Can you empty the gas and clean the inside of the tank before re assembling the new part?

  • @richardmacsinka4919
    @richardmacsinka4919 10 месяцев назад

    Very thorough , first rate , thanks for the overview

  • @kimmystewart2560
    @kimmystewart2560 Год назад +2

    You made it look harder then it is. What in the heck is your reason for the fuse pulling, that was a totally unnecessary step. I didn’t require a pick for anything, everything was easy to squeeze with my fingers.

  • @bubbatennessee7531
    @bubbatennessee7531 Год назад +1

    Very professional, thanks

    • @geraldzamora5031
      @geraldzamora5031 Год назад

      Gerald from AZ Nice video very helpful and informative thanks

  • @rayray9777
    @rayray9777 11 месяцев назад

    whats the time frame on doing this?

  • @waymenlawrence2064
    @waymenlawrence2064 Год назад

    How long will this pump last and what is the warranty?

  • @augiekawase
    @augiekawase 4 месяца назад

    That's the way to avoid spending high dollars on OEM pump. By the way who makes the fuel pump?

  • @betocastaneda29
    @betocastaneda29 Год назад

    Because in the description it says that it is not compatible for titan 2004.

  • @maddmavic
    @maddmavic 6 месяцев назад

    They sell the entire pump filter sending unit etc for like 100 .00

  • @davidsayre7728
    @davidsayre7728 Год назад

    Thanks man. Good informative video 🤘🏼

  • @MiGuel-oj4tb
    @MiGuel-oj4tb 4 месяца назад

    Everything is pretty good except EVAP line and definitely not the fuel line. The EVAP line took forever, but it can be accomplished with tones of patience and time.
    As for the fuel line, I have no idea how you had that much space to work on it. My 2006 Titan has almost no room where I can barely touch one of the sides. I even dropped the tank a bit to gain more space and still can't get the line off. Out of everything you put on here, your fuel line removal is 100% a lie.