After changing the Evap emissions purge valve. On a nissan titan. Are you suppose to reset Fuel trims?? An if so, What would you recommend for the procedure to do this, As the TSB is out for this auto on resetting fuel trims. The TSB calls for reset by obd2 scanner with ability, Which most of us DIY do not have. Also I have seen a method, of starting the truck, clearing all Check engine codes, and then turning off, then remove key, then open hood remove the maf sensor harness connector, then start truck wait for C.E.L. then turn truck of, remove key, put harness back on, then turn key to on, NOT RUN, 'Then clear all codes, Then Read codes again to ensure it is off. The start truck, Run truck at 2500 rpms for 1 min. Then stop and while parked run truck at idle for 10 minutes. Will reset your fuel trims. Or should/does the old trick of negative battery cable removal and 4 hours/turning key to on and draining the solenoids of power while the cable is undone. Which method would you recommend if we even have too. Thanks
My "Service Engine Soon" light came on so I'm stressing because I live in California and I have to get my truck smoged within the next two weeks in order to get my new tags and registration for 2022. If the "SES" light is on, it's an automatic failed smog test. I called a local mechanic and he wanted to $400 to fix the problem!!!! So, I stopped by AutoZone to use there free scanner and it revealed that the EVAP Purge Valve is bad. Bought the valve for $92 dollars and watched this video. Saved me over $300!!! Thank you so much for this video! You are a true angel indeed!!
PEP Boys wanted to charge me 700 buck for this little operation. Thanks for the video! In may case removing the hoses was easier after I unscrewed the part but that's all (I have to offer in addition
Great instructional video for this simple fix. 2006 Nissan Armada LE and SES light came on. Headed to AutoZone and got code P0442. Bought part, watched video, and performed the repair.
Thank for the video. I have a 2004 that seem to need a tune up. Replaced sparks plugs, boots, and springs but continue to have the a rough idle and a P0455 code (gross leak/no flow). This code suggest replacing the fuel cap first and then the Evaporative Emissions (EVAP) Canister Vent Solenoid located above the fuel tank. My engine appear to draw too much raw fuel causing a very rich fuel mixture, black smoke from the exhaust, and increased fuel consumption. After some research I found out the EVAPorative Emissions Purge Valve regulates the flow of stored fuel vapors from the charcoal canister to the intake manifold. It also prevents fuel vapors from the fuel tank and carburetor fuel bowl from escaping into the atmosphere. Research also reviled if the Purge valve fails it would cause my exact symptoms. After replacing it my problems are gone. Thanks for the video again guys!
Thank you for your post. I have a 2008 and I am getting a PO 455 it looks like the sensor/part is at the intake and not on the canister in the back fuel tank area. Is that where you replaced your's????
Very helpful video. Thank you. I need to replace on my truck. What is the part number? I'm trying to find it on your website but could not locate this part.
Is this the same or similar to the 2008 Nissan Armada? I am getting a p0455 code for vapor canister purge vale and trying to see what all is involved in the fix. Thank you
+Ch Fi We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I am very confused. Everywhere else says that this part is located by the gas tank and attaches to the fuel vapor canister. And the part that you link seems to match the one in those videos and not this one. ?????
Hello, I have a question about that part, how do I know if it is working, why do I have a fault that raises and lowers the RPM but nothing strong and it vibrates little and when I disconnect that part, it does not make any changes to the engine or it should not? I hope you can help me thanks
Great video.Just got back from auto zone and got a p0448 error code.Says EVAP canister vent control valve was closed.My truck (2006 nissan armada) is accelerating(reving) on its own,does it for a sec then calms down then after a few secs it revs from 0 to 1and the truck shakes a little bit when it accelerates.Could this be because of the valve? THANK YOU BIG TIME IN ADVANCE
I have rpm drop at 40 feels like back pressure and trouble with acceleration I have code for maf & 02 sensor bank 2 & small evap leak. I have already replaced with factory parts & did the bank 2 upper catalytic converter any ideas on what could be causing this I’ve replaced a bunch of other parts as well such as camshaft sensors,pcv valve intake gaskets new plugs & coil packs nothing seems to get rid of this issue
I went to O’Reillys and had a diagnostic put on my truck 2010 Nissan titan and he said it come up gross pressure leak I believe and he said it was my Valve Solenoid! But my trucks still running and it runs pretty good actually, but I can hear there’s a noise coming from under my hood right where that sensor is for that valve solenoid,that is held on with 2,10 mm bolts two air hoses coming in from both sides and my switch that plugs in to it!!?
@@jimmar1285 hi Jim your post is very good and extremely useful. I'm getting a 0455 code however the report says to replace the EVAP vent solenoid.. . Which seems to be located on the intake manifold. Is that correct? Or do I need to re replace the EVAP canister Valve in the back by the tank??? Thanks in advance for your help
Help !!! My 2008 Nissan Titan truck is smoking even worse after i changed both PCV VALUES, changed the oil and it's smoking worse then it did. before i did all of this . So does anyone have answers to why this truck smokes like it does. it use to be a small white puff of smoke before i did the maintenance. now it's a large puff of smoke that seems to last forever then clears out
+andy morgan Unfortunately we cannot really accurately diagnose that. We would advise you take it to a trustworthy mechanic in your area that can look at it in person
HI Richard, This wouldn't cause that to happen. There may be something going on with the fuel filler neck. You may want to check it to see if there's a kink or a bend in the tube that shouldn't be there. Hope this helps you out. 1aauto.com 866-403-3393
Richard Boyer I get that quite frequently too but only when almost empty. I have to make sure I only squeeze the trigger half way when filling up. I recently have had a po455 ses light come on and have started by replacing the fuel cap but that didn't solve the problem.
Hello! We would be happy to see if we carry the correct part for your vehicle. Just give us a call or email us and one of our Customer Service Representatives will be happy to assist.+jersal873
+Francisco Soto We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
After changing the Evap emissions purge valve. On a nissan titan. Are you suppose to reset Fuel trims?? An if so, What would you recommend for the procedure to do this, As the TSB is out for this auto on resetting fuel trims. The TSB calls for reset by obd2 scanner with ability, Which most of us DIY do not have. Also I have seen a method, of starting the truck, clearing all Check engine codes, and then turning off, then remove key, then open hood remove the maf sensor harness connector, then start truck wait for C.E.L. then turn truck of, remove key, put harness back on, then turn key to on, NOT RUN, 'Then clear all codes, Then Read codes again to ensure it is off. The start truck, Run truck at 2500 rpms for 1 min. Then stop and while parked run truck at idle for 10 minutes. Will reset your fuel trims. Or should/does the old trick of negative battery cable removal and 4 hours/turning key to on and draining the solenoids of power while the cable is undone. Which method would you recommend if we even have too. Thanks
My "Service Engine Soon" light came on so I'm stressing because I live in California and I have to get my truck smoged within the next two weeks in order to get my new tags and registration for 2022. If the "SES" light is on, it's an automatic failed smog test. I called a local mechanic and he wanted to $400 to fix the problem!!!! So, I stopped by AutoZone to use there free scanner and it revealed that the EVAP Purge Valve is bad. Bought the valve for $92 dollars and watched this video. Saved me over $300!!! Thank you so much for this video! You are a true angel indeed!!
PEP Boys wanted to charge me 700 buck for this little operation. Thanks for the video! In may case removing the hoses was easier after I unscrewed the part but that's all (I have to offer in addition
Great instructional video for this simple fix. 2006 Nissan Armada LE and SES light came on. Headed to AutoZone and got code P0442. Bought part, watched video, and performed the repair.
Your videos have helped me numerous times. Thanks fellas you guys rock 🤘🏻
Can't believe the dealership wanted to charge me 350 to replace this. Great video. Thanks!
+Skye Harney A little know-how can go a long way. We're glad the video helped you out. 1aauto.com 866-403-3393
yep this is totally easy will skip stealership trying to rip me off with this procedure.
Thank for the video. I have a 2004 that seem to need a tune up. Replaced sparks plugs, boots, and springs but continue to have the a rough idle and a P0455 code (gross leak/no flow). This code suggest replacing the fuel cap first and then the Evaporative Emissions (EVAP) Canister Vent Solenoid located above the fuel tank. My engine appear to draw too much raw fuel causing a very rich fuel mixture, black smoke from the exhaust, and increased fuel consumption. After some research I found out the EVAPorative Emissions Purge Valve regulates the flow of stored fuel vapors from the charcoal canister to the intake manifold. It also prevents fuel vapors from the fuel tank and carburetor fuel bowl from escaping into the atmosphere. Research also reviled if the Purge valve fails it would cause my exact symptoms. After replacing it my problems are gone. Thanks for the video again guys!
Thank you for your post. I have a 2008 and I am getting a PO 455 it looks like the sensor/part is at the intake and not on the canister in the back fuel tank area. Is that where you replaced your's????
Thank God it's an easy fix. Thank you for the help, I'll be replacing mine on payday.
Thanks, very helpful. Thank GOD it was easy to get to.
So, what are the symptoms of a bad purge valve (other than the "service engine" light coming on?
Thank you so much. This matches my 08 Infinity QX56. This will save me some money. Stay blessed.
+CPhil Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
Very helpful video. Thank you. I need to replace on my truck. What is the part number? I'm trying to find it on your website but could not locate this part.
Thanks for the help!
I got an 04. N I have put all new plugs and coil packs in it. It tends to blow a plug and a pack on dof cyl every few weeks what would cause this ?
Is this the same or similar to the 2008 Nissan Armada? I am getting a p0455 code for vapor canister purge vale and trying to see what all is involved in the fix. Thank you
+Ch Fi We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I am very confused. Everywhere else says that this part is located by the gas tank and attaches to the fuel vapor canister. And the part that you link seems to match the one in those videos and not this one. ?????
Hello, I have a question about that part, how do I know if it is working, why do I have a fault that raises and lowers the RPM but nothing strong and it vibrates little and when I disconnect that part, it does not make any changes to the engine or it should not? I hope you can help me thanks
I'm getting the p0456 code..gas cap clean and tight..cant see what else is setting it off..any ideas what else I can try
Great video.Just got back from auto zone and got a p0448 error code.Says EVAP canister vent control valve was closed.My truck (2006 nissan armada) is accelerating(reving) on its own,does it for a sec then calms down then after a few secs it revs from 0 to 1and the truck shakes a little bit when it accelerates.Could this be because of the valve? THANK YOU BIG TIME IN ADVANCE
+JESSE VALENZ Thank you for checking us out. This certainly could be the reason you are getting the code, and symptoms. 1aauto.com
I replaced the valve and still has a rough idle,just doesn't do it as often.Still revs.Any advice?
@@b.t.w.xlbullies2728 how did you solve?
wow, very simple
Nice
I have rpm drop at 40 feels like back pressure and trouble with acceleration I have code for maf & 02 sensor bank 2 & small evap leak. I have already replaced with factory parts & did the bank 2 upper catalytic converter any ideas on what could be causing this I’ve replaced a bunch of other parts as well such as camshaft sensors,pcv valve intake gaskets new plugs & coil packs nothing seems to get rid of this issue
Did you figure out what the problem is?
Hi I have 2006 Nissan titan se I have gas leak on the back of the tank what could it be from
Hi is this may fix code P0442.?
Can this cause your gas mph to go down hill?
Hello, good morning, how can I know or how can I check if it is not working well? I hope you can answer me as soon as possible
+Beto Castaneda We do not have a diagnosis video for this part, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c
Can this cause a p0448?
If the purge valve solenoid code come up is it going to make it not start
I went to O’Reillys and had a diagnostic put on my truck 2010 Nissan titan and he said it come up gross pressure leak I believe and he said it was my Valve Solenoid! But my trucks still running and it runs pretty good actually, but I can hear there’s a noise coming from under my hood right where that sensor is for that valve solenoid,that is held on with 2,10 mm bolts two air hoses coming in from both sides and my switch that plugs in to it!!?
Any help would be really appreciate it
what about a p0455 code and I cant fill my tank all the way?
P0455 Gross Leak, canister vent valve stuck open
@@jimmar1285 hi Jim your post is very good and extremely useful. I'm getting a 0455 code however the report says to replace the EVAP vent solenoid.. . Which seems to be located on the intake manifold. Is that correct? Or do I need to re replace the EVAP canister Valve in the back by the tank??? Thanks in advance for your help
Help !!! My 2008 Nissan Titan truck is smoking even worse after i changed both PCV VALUES, changed the oil and it's smoking worse then it did. before i did all of this . So does anyone have answers to why this truck smokes like it does. it use to be a small white puff of smoke before i did the maintenance. now it's a large puff of smoke that seems to last forever then clears out
+andy morgan Unfortunately we cannot really accurately diagnose that. We would advise you take it to a trustworthy mechanic in your area that can look at it in person
I know this is a 3 year old comment, but have you tried changing the valve covers?
Would this cause gas to spill out when filling up?
HI Richard, This wouldn't cause that to happen. There may be something going on with the fuel filler neck. You may want to check it to see if there's a kink or a bend in the tube that shouldn't be there. Hope this helps you out. 1aauto.com 866-403-3393
Richard Boyer my titan does the same thing. did u ever figure out what the problem was?
Richard Boyer I get that quite frequently too but only when almost empty. I have to make sure I only squeeze the trigger half way when filling up. I recently have had a po455 ses light come on and have started by replacing the fuel cap but that didn't solve the problem.
I just started having this problem also. have you found out anything on it
Hi! 2010 Armada. What is the part #? Get code 0442 and would like to change this part out if it’s this easy
Hello! We would be happy to see if we carry the correct part for your vehicle. Just give us a call or email us and one of our Customer Service Representatives will be happy to assist.+jersal873
Where is the part number
Why my AT check light on on my Nissan Titan on
+Francisco Soto We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
So it takes less than 20 minutes? wow. The dealership wanted $400 CAD
Thanks for checking us out. 1aauto.com +TacoHorse
Because there crooks !