Program Your Dish Network Remote to TV or ANY Device in Less than 3 Min...
HTML-код
- Опубликовано: 15 дек 2024
- Open Description Below for Important Links.
Quick Tutorial of how to program this style remote to your TV. Very easy to follow.
Here's a LINK to the Remote codes.. Just input your type of remote and follow directions on Dish Site; www.mydish.com...
Just a video to teach you how to program your dish remote to any device quickly and easily. In this video I describe how enter the information needed to program the remote to TV, Aux(stereo receiver), DVD etc..
Here's a link to the dish site just click the three digit remote control code link and enter the appropriate info.
www.mydish.com...
Tools used to make this video:
Dish Network 20.1 IR Remote:
amzn.to/2fnx07f
Microphone Electrovoice Re20:
amzn.to/2wMF97O
Yamaha MG10XU Mixer:
amzn.to/2wLM0hV
Disclaimer:
This description contains affiliate links.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Thank You for Supporting my Channel.
I couldn't find any 3 digit control codes, had no idea what the instructions on dish were referring to, so thank you very much. It's really hard for me to do anything like this and I did it within 30 seconds! Thanks!
Excellent! You're welcome.. :-)
You the man, 601 worked. Thanks a million............
You're welcome.. 😀
Just what I needed. Easy and on point. Thank you.
You're welcome!
I looked this channel up and I followed your instructions. Coincidence it was. You were programming to a Samsung TV., Which I have, and with the first code you mentioned my TV and dish remote control worked. Thank you you for this video.
Well that made it easy!.... Thanks for watching....
The video helped me out HEAPS!
Awesome! So glad I could help... 😊
I wanted to sincerely thank you. You were able to help me by holding that card with the remote codes. I was able to pause the video and read the codes for Sanyo TV and wrote down the does and tried a few until I got my remote to control the TV.
Such a pain in the ass if you know what I mean to not be able to control your TV.,
Thanks again and Happy 4th bud.
Kudro Rico Excellent! Thanks.... I'll try to use the codes in some future videos 😀😀.... Glad it worked.... Happy 4th
How do you program insignia soundbar model nd hsb318 none of the codes work thanks
If none of the codes work... I think that remote can learn the commands from the original remote if u have it, see if these instructions help
www.mydish.com/support/products/remotes/customizablecommands
You’re are amazing for this!!! It’s super easy to follow and it works when you try all the codes
Thank you so much!!
Halle-FREAKIN-lujah ! I wasted two hours trying to program my Samsung TV to my Dish remote. It took me 15 seconds to connect my Samsung TV 😅😊👍🧑🤝🧑
to my Dish DVR usig the vid!!! Kudos, Rudy!!!
That's awesome! I'm so glad I could help... 😊
What is the code for panasonic viera
HI, I don't know off hand. If you follow this link and scroll down to "Three digit remote control code" You can easily look it up that way.my.dish.com/support/products/remotes/how-to/program-to-tvother
Thank you so much! I just about gave up because the other videos weren’t working. Thanks:)
Glad I could help!.. You're welcome.. 🙂
Thanks! These instructions worked far better than the ones on Dish Network... :)
It is easier to hold the Tv button till all themblink twice. Hit the top power button then press down over and over till the tv turns off then press # to save. power tv on and check volume and it should all be good ^^
I got a new Universal Remote that looks identical to yours except mine says 1 at the very bottom of the front of the remote where yours says 2. Anyway i got the remote to work with my Samsung tv but i can't get it to work with my Dish's Joey2. I tried everything i could think of that i read online and it will not connect to the Joey which is the whole reason i bought this thing. Any suggestions ?
If I remember right you have to set the remote address in the menu.. Also is your Joey 2 located at the same place as the Samsung TV? IF not, is the remote you're using a UHF remote?
Wow it was very helpful, You made it very easy to program my DVD player going for my Sony Receiver next. Thanks
Awesome... You're welcome! 😀
Thank you so much! Code 601 worked!
You're welcome!
How do I program my onn dvd player to my dish universal remote because I'm trouble finding the code
Was this remote teachable? If so, you can use the original remote. If you don't have the original remote and there's no code, that could be a problem!☹️
Just want to say thank you you made it easy
wesley Flores You’re welcome 😊
This worked, and helped me out a lot! Thank you!
Scarlet Gamer100 Excellent!
Dec 4 2019, 601# worked on Samsung 4K UHD TV. This video was more help than Samsung support!
Excellent! Thank U.. :-)
Any codes for LG DVD player
Hello, There should be a code link in the description.
@@JLPicard440 Where is description ?
What about an LG tv ?
Bro.. when i push the tv buttom for start the procedure the 4 lights start blinkimg and then shuoff the tv light didnt blink after that.. what u think??
Raul cabronero maybe check the batteries? It'll act funny if batteries are marginal
@@JLPicard440 Can confirm the battery issue. Was trying to get mine to work and it was doing funny things. Replaced the batteries and it worked.
@@flailingcultist8961 Yes.. thank you for confirming... :-)
Thanks. Worked first time
Glad I could help😊
I tried to program my dish remote 20.1 IR remote to my tv. When I push and hold the tv button it just goes solid and if I press anything else the light goes off. I have changed the batteries and it didn’t make a difference.
I'm not exactly sure what's the problem. Are you sure the changed batteries are good? I can't see what you're doing there to determine if the remote has a problem or not..
@@JLPicard440Our old remote quit working so I purchased a new one. When we got it I put new batteries in it. It works great with the dish receiver. I tried to program it to control the tv by your video & it doesn’t work. You say when you push & hold the mode you want to program all the lights flash then the tv light should stay solid. The other lights never flash. The tv button does stay solid but as soon as I start to enter the codes the light goes off. So I tried changing the batteries again and tried again and it did the same thing.
@@brookejohnson8298 OIC.. You could have a defective remote. When you push your device button, the other lights need to flash and go out.. Try programming in a different device just to see if you can get the other lights to flash when you do that, just for kicks and giggles.. Doesn't matter what code you put in there, just something off the list to see if it'll accept it.
I have the same problem
What’s the code for firestick
There is no code for Firestick. The fire stick remote uses a RF connection on it's remote control. However, many TVs have the ability to control it thru the HDMI port. A lot of TVs have this function disabled by default. It's called HDMI CEC. You'll have to google your brand and see where it's at in the menu. Most of the time it won't be labeled this way as most manufacturers call it something different. If you enable this feature, you should be able to control the Firestick this way.
How do you take it off. Mine didn't connect correctly.
I'm sorry, but your question doesn't make any sense.
Thank you so much It happens that they have Samsung TV too and that was super fast it worked like magic best help ever
You're very welcome!
I see when you press and hold the button all buttons light up, then the TV button flashes while you input the code. Mine doesn't do this; all the lights flash quickly then turn off. I believe this is where my problem is, as it does not seem to be entering Program Mode. Have you heard of this problem before or have any ideas on what's wrong?
no i've never had that happen.. you can try taking the batteries out for a couple of minutes and put them back and see if that helps...
What if the TV light does not continue blinking after holding it down
for 3 seconds?
SOLUTION:
Replace the batteries with brand new ones and try the method again. You're welcome!
DerkuiDerkui oh yeah, I meant to update my comment. You're right; that's exactly what it was. After talking to two different support people, one said I needed to call Samsung (TV maker) for updated codes, the other said I needed a new remote. I knew they were both wrong, so I read through the remote user guide. It said if it does that, the batteries are too low for programming.
Same here . The lights don’t come on , the only one that lights up is the SAT button . Ugh so frustrating
anyone know if there’s a code for BenQ monitor? if they even work
TypicalNemesis I'm not sure on that one
on that remot how do you go to hdmi
TV/ Input
That was easy to program the remote. Thanks
Your Welcome.... Thanks for watching.
whats the code for a vizio tv .?
I got 505, but there are several... if this one doesn't work... try the link in the description ... it'll get you all the possible codes... thanks..
Thank you! Works really good on my tv. Hopper sling
wilder alvarez Excellent... Thank u
Broooooo I clicked on this video it was so crazy because I have the same dish remote and the same exact tv I said oh he said he has a Samsung I was even more shocked when I saw it was the exact same tv as well 😂😂😂😂😂what a huge coincidence!!!!!!
That's awesome. I wound up selling that Samsung for an LG that quit 6 months later. I should have kept it, that was a good TV and I never had any trouble out of it... ☹️
I have like the frist remote that dish came out with cannot find it on Google to program it to my TV
TheDonnap63 what about the dish site.... they have a lot of different ones there and how to program them
Great job thank you for the information work perfectly!
Excellent! Thanks for the comment.. :-)
It worked right away thank you
ignacio rojo You're Welcome 😁😁
Thanks man it worked!!
You're welcome... :-)
Thank you,I did it.
You're welcome!
how do u canel it?
I''m not sure what you mean, but if you want to cancel the whole thing, for example if you push TV and hold it, then you want to cancel... push TV again and it goes back to normal..
Thank you sir worked for my sansui tv with the first code for that brand
Forrest Estes Excellent 😀😀
YOU SAVED MY LIFE MATE!!!!!! Thanks 🙏
I appreciate it!! Thanks....
Easy to follow, right on point. Thank you!
awsomeboy14 thank u
You seriously saved me from tossing this thing out the window!!!
LOL.... Thanks.... :-)
what is RCA code
Sharon Pendleton we ghvi
I need code for lg smart tv
HI, I usually leave a link to the codes in the description. If it's not there, it's easy to google the codes for Dish Network. Thank you.
Thanks bro ur a g it worked 1st code
Cooper B That's Great!😁😁
Thank you it worked
You're welcome! Great to hear...
Amazing thanks
You're welcome!.. :-)
Thanks for the help!!!!
NO Problem..!
Thank U!
Thank you
U Welcome!
What about TCL ruko
Oscar Gomez???
Mind keeps on beeping SAT and doesn’t change the channels 😢
How are the batteries?
Thank you !!
You're welcome!
Seven years later and you still helping out people with controller issues, THANKS a lot.
Btw I SUBD. 👍
That's awesome! Thank you so much.. 😊
Thank u so much
Most welcome 😊
Thank you so much. This work for me
Thank U!
This is important, if your batteries are low, the remote won't go into program mode.
soulseeka1 good tip
Thank u it really worked
U Welcome!
it worked thanks
awesome!
thank---you
You're Welcome.... :-)
“It’s pretty simple, once you know how to do it.”
Ispeak Mymind ikr i thought the same thing
I have the exact same stere🤣o reciever
Nice! I think I still have it in a box some where... 😊
Thank you so much
Your Welcome!
What's vizio code
FYI. Some TV's have over 20 codes. For the quick and easy way, do this. Turn your tv on, press and hold the tv button until the lights stay on, press the the tv button again. The tv button will stay on. Then, while pointing the remote at the tv, slowly press the top (up) channel button repeatedly until the tv turns off. Press the pound button and wha la. That is the easy way and the way tech do it. As I us to be one.
Thanks
Alexis Alfaro your welcome 😎
LG tv
Yes it'll work on an LG
legend
AHH MOVE YOUR HAND I NEED TO SEE THE SONY CODE
Emily Jackman try 500!... if that doesn't work follow the link in the description... it'll take u to all the codes
Take a Bath Productions Thank you, 500 worked perfectly for my new Sony Bravia x900e.
Very Good...
what a out a panosonic TV
LG CODES!!!
Every video ONLY tells you how to program the TV and not the SATELLITE - I can't change the CHANNELS
Hi, sorry about that. Usually the satellite is programmed already is why. If you google programming dish remote to receiver, a link should pop up from Dish themselves.. that'll give you the step by step.
@@JLPicard440 Good news! - I fixed it!! - I can't believe how simple it was! - Click the SAT button till all the top buttons light up once then press the LOCATION of the receiver box (Apartment #) then press # and it worked! - You saved my life man!
@@GHOSTLYWHISPERS So glad you got it going! You're welcome.. 🙂
Wrong Dish remote.
Update.
OK
Thanks
No problem
Thank you
You're welcome!