How To: Suzuki King quad 300/Quadrunner Oil Strainer Cleaning.
HTML-код
- Опубликовано: 7 дек 2017
- Hey everyone, Wanted to help out some people with problems on these old bikes. Is your ATV running hot? running lean? excessive top end noise? your a DIY'r and do not have a gauge to check oil PSI on your ATV but want to check possible causes? this is a good place to start for low oil pressure! Good thing to clean for preventative maintenance!
Авто/Мото
Keep the quad vids coming. Thank you sir
I just did this to my 99 King quad after viewing your video. There was definitely some sludge and foreign objects built up over the years.
Thanks for the great video!
How about a video on clutch adjustment? I haven't seen one on RUclips yet for the king quad.
I’m gonna clean out mine this weekend! Also I did replace the front seal, easy job, you just need to separate the front ujoint in place, but once you make up your mind to do it, it’s a breeze.
good info right on. i live in snow and bear country to .lifes good no covid-19 for hundreds of miles .
Thanks for this video ! Just given one as a gift from my son and trying to establish a maintenance schedule on it for a starting point.
Not a problem. This is good to check for sure. When i bought mine i took the plastics off and pressure washed and cleaned everything. Checked wheel bearings, changed front Diff fluid. Change the oil and filter and you are good to go. Lots of other stuff that can be done of course.
Doing this and differential oil today,.thanks.
Mine runs alot cooler than it used to after i watch this video and did the same thing
Thanks for the video. We just picked up a 1998 & 2000 KQ300. Definitely make more videos on your quad. There's not much out there on these. Please post links of the parts/specific tools you use.
+Cdn Glenwood thanks for the comment! They are great ATVs and they really are simple and well designed. We just got nailed with snow here and i have been plowing with it. If you can find a blade for yours do it. They are great. Let me know what you need help with. I will be uploading another video soon. I have to ask CDN i assume is canadian, and glenwood, are you in northern ontario also? I recognize the name glenwood. Cheers!
I just found you! Great stuff!!!!
Can’t wait to see what my screen looks like it’s a 92 and idk if it ever got looked at before me and I know I haven’t looked at it but now I will thanks for saving me a head ache hoping it runs cooler
Let me know. I bet this is it.
Your videos are appreciated, I'll be checking mine
Did the job today. Quite a bit of rusty debris and some spaghetti like strings of rubber, but the screen was clean.
Thanks for the info!
Just changed my oil, sump was about as bad!
I didn't know about strainer either, and im on my 3rd machine.
I didn't even know that was the oil drain. I've been using the plug all the way to the rear.
Thanks
I didn't know that existed.... Mine overheated and I will put money on this being the root cause.... Well, live and learn.
Mine was getting very hot and it took me a long time to pin point this issue.
Buen video
You don't need to remove the screen from the looks of it. Just clean it while its still in there? The reason I say that is I can't get the screws to loosen on mine so spraying it with air should do the trick for the big stuff.
Hey,
I just purchased a 1987 LT250 Quadrunner. It is in great condition and only has 500 miles on it. However, it makes a squealing sound after getting warmed up. any thoughts?
Thanks
Great info here Josh. Thanks for making these videos for King Quad 300 owners.
Just to be sure, the oil we see draining out is the same for the engine correct? Thanks
This is correct Mark. Thanks for the comment
I thought the ears on the screen went down somebody installed this one wrong just making sure thanks for the video
Hi there, Thanks for your help with the videos. My engine overheated the other day and blew the lower gasket so I had to take the cylinder head off to replace it. However im trying to figure out could a lack of oil pressure have caused the initial problem? How do I actually check my oil pressure? How can I make sure the oil pump is working? Thanks again
Hey so there is a port on the oil filter housing. I believe spec is only 4-5 PSI or so. It is worth checking to make sure it is clean.
I never knew that
OMG. I pulled mine while doing a first oil change. That little cover had a bunch of dirt and crap on it. Somebody must have forgotten to connect a breather when mudbogging
My lt2504wd smokes only when hot. Im thinking head ?
Tengo una pregunta cómo cambiar el aceite de transmisión Suzuki 300
I just bought my 1996 KQ 300. So, I haven't performed any maintenance yet. But other videos seem to show only an oil filter behind the cover you removed, near the see-thru window. Where exactly is the screen located?
The screen is located on the bottom where i show in this video. The filter is located beside the sight glass yes. I have another video on doing an oil change which will show you the location. It is in My king quad 300 playlist. Josh
@@Schneids15... OK, thanks Josh for your reply. Granted, I watched your vid at work with the sound off because well, I was supposed to be working. That's why I was a little confused. I get it now. The cover looks very similar. Thanks again.
What oil did you use
I have a 95 king quad just replaced rings and valves and valve seals no it is making loud clicking sound when running and it revs up really high on its own out of no where and have to lossen throttle cable to get it to lower then it wont idle please help
Check your choke cable linkage to carb.
does the 250 quadrunner have this oil screen also ?
Not sure, can’t see why it wouldn’t though.
Part number for the 0-ring?
No Sorry. They usually come with the filter if you get it from napa or something.
Hey there , I sask here what I'm looking at a machine with 2500 km on it, looks good and seems to run well , is that considered low or high mileage ? I know it's a loaded question because it depends on ownership and maintenance. But in general how it that for km?
Hey Shawn! Sask as in the province? I’m in Canada as well! 2500 is not bad at all. Very low if it is taken care of.
Thanks for your reply , yes in sask Canada, Your plethora of videos sure has been a great source of Info , and you answer questions also ! Thanks for taking the time to do all this ! How do they do with a small snow blade on them ? Any suggestions for make of blade ?
Right on! I have been thinking of moving to Sask actually. Have to ask what part? I really like the south end.
A snow plow on them is amazing. Pull out the pin on the diff lock so you can go into diff lock in low and high range and they are amazing. I plowed with mine for years (you should find the videos on my channel) a genuine old Suzuki plow can be picked up cheap usually. I like them because they have there own frame that spans under the atv and attaches to the trailer hitch. It is really strong.
@@Schneids15 in regina , I've been here 17 years , always seems to be employment , easy to commute , winters can be a tough go with cold Temps. If you are serious about it I can certainly help with any questions or pre planning
Thanks Shawn. I appreciate that. I am serious just have to plan when and where. Used to the cold winters from being in Northern ON. Would like a little warmer climate honestly and that is why i like the south west side of the province.
How can you tell if it has low oil pressure
You have to buy a gauge and test. They only run about 4-6PSI if i recall.
If it has lots of oil and is running cool up top i would think it is fine.
Do you know a fix for 4th and 5th gear sounding like a war zone?
No sorry, never have ran into that issue. Sorry
Does the entire oil have to be drained to access the screen? And this is located under the skid plate?
Yes and yes. You can drain the oil from there also
It's always the last guys fault
Having opened this motor for this first time indeed it was. I later found out it had an oversized piston in it already. Whoever chipped the gaskets off just let all the gasket material go into the lower end i assume.
i had to bag all the debris in trash bags my god dirty oil screen.
Who ever was into my engine before i bought it i think scraped all the gaskets and then threw them in the motor and then put the cover on lol
@@Schneids15 got mine from the landfill totalled no handle bars plastics racksor shiting knobs all destroyed even gas cap torn clean off . frame engine drive terrain tires wheels seat and carb is what i got. i was thinkin parts. now 3 months later its my dailey work machine . this trick is sweet thanks.
Thanks for the comment👍🏻 check out my other videos and i show some good mods you can do for cheap. I love the diff lock mod. So handy.
@@Schneids15 have you stopped and thought about how many gears it has? 15 forward gears and 3 reverse thats 18 speed quad ! like a semi truck kinda. love that low deep under gear with differential lock pull anything.
Oh yeah. I use it all the time. Bull low and 2nd gear is perfect for crawling around on stuff in the bush too. Keeps it revving high enough you are not always in and out on your clutch
Yick 😂
whats the deal some just want clicks if you go buy parts for anything you work on we always start with year date make model then part we are looking its not all inclusive
Sorry i don’t understand what you are trying to say?