Onewheel Beginner Tips | Riding Uphill, Inclines, Elevated Mode | Pint & XR
HTML-код
- Опубликовано: 28 авг 2024
- Please consider supporting on Patreon: / theboardgarage
Use my code "DONTFALL" for 10% off at Flatland3D: flatland3d.com...
As I continue covering topic in my Beginner Tips series, note that this topic comes at the request of a viewer. Riding uphill can be intimidating if you feel the board struggling to keep you upright. This is normal, and it's important to realize that for many rider, the Onewheel doesn't exactly "crush hills" like you made have been led to believe. And so, developing confidence and familiarity with inclines is an important step in becoming fluent with street riding in various locations.
KEEP IN MIND that it is possible to approach a hill TOO SLOWLY. Moderate speed is most desirable in this instance, and it's important to be measured in your acceleration. Many riders nosedive when going uphill, so it's important to take the time to learn to avoid that.
Rememeber, the Onewheel in inherently dangerous. It's a one-wheeled skateboard. So practicing safety maneuvers itself presents risk and you should protect yourself at all times should you choose to ride and practice.
_______________________
I'm 6'1", weigh 220, and it's very important for me to be conscious of battery level when taking hills on my pint. When I started riding, I couldn't imagine I'd have to worry too much about hills unless I had a relatively low battery level (
Things I wish I would have known before I got that low lol I was riding 10% nose dived hard and ate it. Was wearing gear, but still got hurt for a few days.
Yea definitely can’t mess around with less than 50%
@@kylemark4536 100% especially at my weight 6 4' 275 on a pint, but I love it, so just gotta be more cautious of that battery and bought Fangs
@@DylanVBWRX definitely I got the carbon smith and they are amazing ride safe bro
Slow “carving” and making sure not to lean forward are definitely important to conquering big hills. Another tip I’d add is to practice balancing! There were a few hills on my commute I couldn’t make it up before, however after using a balance board for some time and getting better at it, I’ve found I can go faster and up steeper hills, presumably this puts less stress on the motor. Also It makes sense to me that the pint has more torque since it has a smaller tire, however I ride a stock Vega on my xr and it can go up much steeper hills than I can on my pint with the stock unili.
I really don’t feel more torque on the pint. The opposite actually. Not sure why everyone says the XR has less torque. For me it has both more torque and of course more speed.
I've got a couple hours in on mine so far and I can only dream of being this stable/turning this casually hahahaha
Your channel has hooked me on to this one wheel, very expensive but superb to watch. Bless you stay safe.🙏🇬🇧
But worth it. Got mine in yesterday and I can't stop riding
Going up hills on my XR really makes me love and appreciate my fangs😂
Transition to the hill is one of the most dangerous moves on a OW. Even slow speed, it’s super easy to dig the nose, and go over the falls. Of my three trips over, (all in the first weeks), all three have involved a transition to an uphill segment. Two on trails, and one at the end of my driveway that ended up breaking a rib (landed on my front side arm).
Love the way you slipped in 3 different dismounts without comment. The front heel lift looks fun. Gonna try that.
i noticed that as well. i haven't seen the jump straddle dismount before
I feel this is an important lesson to learn. I had a bad accident on a hill that led to a broken shoulder and some the points Mario makes would have helped me back then.
First of all, I'm a heavier rider, and if that's you too, then know that any of these problems are magnified greatly. The board is already working hard to keep you level so any extra power requirements because of an incline change are increased. This brings you ever closer to that point where the motor just gives up. The nosedive.
Be aware that any change in surface elevation can be the straw that breaks the camels back as it were. Even if that change is only for a few inches like a speed bump or crack. Treat hills with caution until you know them and your riding abilities, just like Mario says!
Word, this a so true. As a bigger guy, the beginning of an uphill has been my Achilles heel, at least early on.
I love your content, it helped me decide to buy a OW, and now you’re helping me learn how to ride better - thanks for all the hard work to show us! 🙏🤙🏽
Thank you, I appreciate that. Take care.
I've installed Fangs 2.1 that gives me a chance to recover during nose dives going uphill. Feel much safer now 😇
How do fangs work ?
Dacudo Ragnarök it helps you to recover after a nose dive. Very useful when your battery is low or/and you are going uphill. You can rebalance yourself or win a second to regroup yourself and jump from the board.
The only reason my fangs are still on my board, is the up hill factor. They don’t do shit for you otherwise, on a XR.
I just stay in delirium anymore... Pretty much can tackle any terrain.
On a steep uphill, I do this like serpentine carve gang just a little more "real estate"with each lateral traversal.
Once you've mastered that, man I fly uphill 🤙🏽
Great video. There are considerations. Including tire pressures.
The tire flat ( not carving ) has greater grip as is has a greater surface contact area., when you carve you are pushing more kinetic energy ( battery ) into a smaller surface contact point, less friction to overcome. Youve noticed that carrying speed and momentum into a hill wil allow you to climb more too ( and saves battery ), when you transition from heel to toe edge you gain the potential energy ( your balance ) thst becomes kinetic, in the transition. ( when you adjust your muscles ) .. its important to learn the points where the board hits the overcurrent ( potholes cracks etc ) and cannot compensate. You are wrong about the tail low on downhkll, dont underestimate a tail drag crash... tail drag, esoecially on trail or dirt = accelleration and no "edge" . Understand that voltage IS electrical PRESSURE. So overcurrent will happen at lower torques
Mario I love you narration style. Enjoyed the tips videos recently. I’m curious if you could do a video explaining how to really feel push back for an xr specifically, I haven’t been able to find a in depth video about how to really feel pushback, I just passed 100 miles on my xr this week and am still super weary I’m not able to feel pushback, only one nosedive so far thankfully
sivart nospmis I started off with a pint and on the XR it was hard for me to notice pushback at all unless I was riding in delirium mode. Hope that helps! :)
I say that dismount was near perfect 1:18 🤙🏽➖🔘➖
Thank you sir! 🙏
That quick stop is just about the only way I dismount on my pint - but it is a little sketch if you don’t time it right 😄
Good stuff bro. I live up some satanic hills - and my Pint can’t even make it. I’m a big dude and I’m still amazed at the power these motors generate, although some more would be helpful. I didn’t consider changing the stock wheel on the XR - I might need to do that for a bit of a torque boost.
Great vid, and some good hill techniques. 👍⛰
I agree with your points on tire sizes affecting speed and torque. But, I noticed there wasn't any change going from stock Vega to Burris 6inch treaded TX33.
I just turned my 2 XRs over and measured the gap from tire to front footpad, both boards have 5mm gap, Vega and Burris are both at 15 psi and both have around 500 miles. So those two tires have the same rolling circumference. 🙂
The steepest hill is the 40th Ave near the Douglaston train station, across from the community church. You should try to ride on that if you have a chance.
you and Colorado Cadi got me tempted to get a OneWheel... 👀
Give intoooo theeee temptationnnnnn...
It’s not worth the injuries…..trust me on this one
@@DARTHDANSAN that's why Colorado Cadi & Mario got me wantin a onewheel, not you 😂😂 but thank you for the feedback
yeah i chaanged my settings to elevated on my pint, the nose is somewhat up and it will stay up, i got the confident climbing hill on elevated mode. but most of the time skyline works for me on Hill as well, with that said when i am on skyline, going up hill, that i have to back up a bit every 10-15 feet, just to practice my front board is always up.
Wow I thought the one wheel was supposed to be great up hills, interesting does that apply to the updated boards.
Finally ordred a pint after watching your videos, didnt want to spend the $ on a XR not knowing if i can even ride one of these things lol so the pint it is. But i live on a farm in the country and its dirt, gravel or grass so i hope it does ok. Love the content!
After 2 years experience, what is your assessment now?
@VELOCITOR it was everything I hoped for. It will tackle any terrain I throw at it. I plan on upgrading to a GT though. Nothing wrong with the pint I just want to try one of the bigger ones now
@@camomaster6316 Thank you! I'm in a similar situation to you; living in a rural area, and I just wanted some assurance that it handles well on dirt roads and other rough terrain.
Cheers!
Boosting ur engagement
I was just asking myself how going up and downhill would be :D and then your video pops up :D (I'm waiting for the lockdown to cease to go get an xr that I've finally found here in italy)
Really enjoying your videos 👍 you’re making me want a OW soooooooo much 😭
You forgot to mention that if you try going down a hill with a fully charged battery, the board could shut down while going down because of the regenerative battery. Remember, if your battery is fully charged or near 100%, the board will shut down when you go downhill and use braking because it will regenerate battery power and if it reaches 100%, it’ll shut down.
That's a strange feature. Has that been patched out since you left this comment or is there a good reason for this to happen that I haven't thought of? I would think it'd be able to keep from being overly charged but maybe not.
Mission =
aggression 6
Stance 0.0
Carve neutral
If you wanted to light tweak in custom start there
The question is how well does the break work when going downhill. Is it too steep to not be able to stop you? Does it regen during the whole breaking?
The break will always stop you, no problems whatsoever and yea, it regens :)
Brake*
Mario, it's time, you need to try an EUC, much more range, speed and maneuverability.
I had considered it, but I actually just ordered a Metroboard X. 😁
Nice choice, I know I paid alot more for the Lacroix Nazare, but it feels justified, very awsome !
Been bitten by the OW bug. Dont even have one yet. Love the content from many community creators out there. Do they push back going downhill as well? To maintain stability? Being that the motor doesn't have to work as hard but cant allow the board to outrun the speed limiter?
Ryan K yes you can get rear pushback going downhill, but the hill has to be quite steep for that to occur, and you have to braking pretty hard.
I want one of these so bad
This is a great video. Can't wait till I can get a onewheel eventually. If I may ask, what city or at least state are you in? What a beautiful neighborhood with beautiful styles of home architecture all intermixed!
Beautiful neighborhood!
Hey Mario! Love you content! Can't wait to see more! I've owned a pint for almost a year and just recently bought a new XR. Question for you since you have both the Pint and XR as well. When using the app, is there an easy way to which between boards if both boards are turned on? Thanks and keep up the great work!
I don't know where to practice this lol I live in the flattest part of the flattest state in America. Not hyperbole. Literally, mathematically, statistically the flattest place in america.
I might panic just seeing a hill, much less trying to stop on one! lol
(I'm partly kidding, there are a few inclines I can probably use.. like a raised church with an angled parking lot out back, or a few raised driveways in a neighborhood nearby. Those aren't hills though.. lol literally just a small raised section because of construction.. maybe that's a hill... idk. Haha but they're rarely more than a few feet difference and some are literally like a 2ft raised area. I really wish I had some hills.. aside from the crazy huge bridges in Tampa...)
Mario, thanks so much for your videos. I always learn a lot from you. I currently own a Pint and I noticed in a video you posted awhile back you talked about a different tire you put on your pint that you said made it handle a bit more like an XR. Could you remind me of the dimensions of this tire and where to buy it. I remember looking for the tire everywhere on the internet, but I was unable to find it. Thanks again Mario.
Do you think putting some of the smaller wheels on the front would improve its hill climbing ability. Not so much that you would be rolling on them, but that if it did dive, it might not throw you forward so abruptly. And this is coming from someone with zero experience with the Onewheel, but would like to own one, without trying to stop the rotation of the planet with my face at every turn...or hill in this case.
Great tips 😂 thanks
Are these legal for park / bike
trails?
been wondering why not use elevated all the time. Isn´t then you center point of mass more on top tire even when pushing down to accelerate ? .... haven´t tested though what it feels like to ride normally
I loooove doing tail skids
Are you doing your commentary VO during the ride? If so, man you sound good and I assume you’re using a lav mic?
Just what I was looking for. :)
Speaking of a healthy battery. I would love to know how you like to charge your board!
That's coming up... Third. Have two videos then I'm hoping for the battery video.
Mario Contino awesome!!!
Until then, my advice is to just keep your board plugged in when you're not using it.
thanks for the video. hey so about a month and a half ago, i got a new bumper with fangs from carbonsmith for my pint, and i carefully went up my buddy's really steep (but smooth) hill to see at what point the nose dive would occur and get mitigated by the fangs. and at one point it did --- the pint wigged out and the fangs hit the pavement and i think the motor must have shut off because i unexpectedly slammed my right/rear foot heel on the pavement. i didn't fall off the board, but i guess the steep angle caused significant hard impact and i'm pretty sure i fracture my heel. i've recovered about 95% now, still riding the pint a lot, never really stopped haha. but it was really an unexpected experience. any thoughts?
would you recommend those flatland 3D gloves? i’m kinda of torn between flatland and 1protect
Yes I would. I have every model they've made, including the reiterations with improvements. I'm a big fan of those gloves and I'd say a friend of Steve at Flatland3D. He's supported me and my channel and continues to do so. I am biased, admittedly, but I'll be wearing these for the foreseeable future.
I'm sure the 1protect are fine gloves, but I love my Flatland3D gloves and they've always been incredible about replacing defective gloves and working in customer feedback into new products. They also will swap out a pair if the size you get doesn't fit, which is nice.
There is a commute I want to take through my community and the neighboring community, but I've been a bit nervous to make it because of a fairly steep hill I would have to either go up or down depending on the route. I've been considering getting those Fangs from Landsurf. Have you had any experience with them?
1:24 why is that a horrible dismount? I do that all the time.
You didn’t talk too much about going DOWN hills, can you get away with going a little faster going downhill because its easier on the motor?
You can, of course. You just have to be mindful of a couple of things. First, you're going fast, so that's something one would want to be comfortable with first, as you would have to deal with shorter reaction times to the bad road, and also your momentum is increased from the slope. Braking is harder. Second, even though it's downhill, the motor still reaches its limit from the rotations. The higher the speed of the motor, the lower its capability for torque.
I’m sooooooo sorry the content has died king of. When I came into the game, I started on a bicycle, then I got a peddle assisted bike and the. I bought both one wheels and 2 gotways. I live here in nyc as well and yes there are bikes everywhere but not at all like Amsterdam. Anyone seen a Segway in person? I’m happy for u, me and anyone else who does this. We r less than the one percenters. I have a van w 4 of these things in it and we need room to roam. Get a unicycle next.
Thanks for the video. I had assumed that the OneWheel got its distances from GPS in which case the tire size would be irrelevant, are you saying its like a car and is using the wheels rotations to figure these numbers? I have no inside info just asking the question.
I am saying that, yes. The Onewheel does not use GPS. Wheel rotations is also how electric skateboards determine speed and mileage on the odometer.
And you're welcome. 🙏
@@TheBoardGarage That's good to know. In my neighborhood when walking, my Google Fit app using GPS, butchers distances. I have to correct them after every walk.
Hi for new rider on XR what mode you recommend? Misión or what’s best. Thank you!!
I swear his video is taken near me that town is so familiar
It's Little Neck, NY.
Marathon Parkway / Little Neck ,I know that area very well !
Every time I look at this guy without glasses I think of vsauce
so going down a hill in elevated is okay too?
I kinda snake the board like a rip stick... I'm 160 pounds all day and have no problem gliding uphill.. you gotta be smooth and listen to the board.
I think most folks who have problem, are riding with dead weight... Not really trying to lighten up on their feet 🤷🏽♂️
You gotta work with the onewheel.
Where'd you get your orange bumpers?
Your dam good
Can you change riding modes on the fly? or do you have to stop?
You have to stop. You can stay on, but can't be moving.
@@TheBoardGarage thanks. Just saw that at 10:43
i disagree about putting it into elevated mode, i dont think its necessary and doesn't help you train to learning the limits of your riding mode, for newer riders i usually tell them to put it in mission and not change it till they really know their limits
Well of course it's not necessary, which is why I showed the same slope in Mission. However if one comes across a hill that is severe, or uncomfortable, then it doesn't make sense to purposely restrict oneself just for the sake of learning limits. Limits are learned usually in one of two ways: through measured, gradual practice, or by hitting that limit quickly and finding what happens on the other side of that boundary. There's nothing stopping someone from going up a hill on Elevated, and then not changing modes when they become familiar with that hill. I personally don't agree that subjecting oneself to unnecessary risk actually teaches limits and skills any better or faster than proceeding cautiously and with high levels of attention.
I'm still way new so forgive me but your dismount just after a minute or so that you said was horrible, why?! It looked decent to me and probably what most of mine look like 😅
Did you just switch stance... Oh I wish I could lol
What camera do you use?
He uses a GoPro H8 on a gimbal on the end of a selfie stick.
➖😎➖💨
Need a Gt for the hills. Makes xr or pint look pathetic
And my 84v DIY makes the GT look kind of pathetic also. There’s always a bigger fish, and this is a fairly old video.