MMM Binding XK Skylark Cub to TX16S

Just a quick video to show how I bound my A160-J3 Skylark to the Eachine/Radiomaster XT16S Transmitter. See the maiden flight here: • MMM A160 Skylark Maiden ‪@modelmakingmaniacs8600‬

[@똘이아빠-z9w]

Thank you. You are a true technician. Other channels keep claiming KN-Wltoys, but my A-160 could not be bound. Thanks to your information, binding was successful with my Radiomaster TX16

[@modelmakingmaniacs8600]

Thanks for your feedback. (-:

[@여행자-n8f]

Thank you so much

[@modelmakingmaniacs8600]

No problem

[@TheAverageDutchman]

Thank you for the information. It took me a while to get it working but it seems to be doing fine now. Slightly annoying most of the information out there is for the older version using the KN protocol. I did need to update the multi-module firmware to get the mode switching working for reason and unless I'm mistaken the rates switch doesn't actually do anything but other than that I'm fairly happen. Now to get the CG a bit better (bit too aft for my liking from factory.)

[@modelmakingmaniacs8600]

We agree that the rates switch does nothing.

[@stevenho5096]

這個對頻先係正確的😊 Thanks

[@stevenho5096]

全球飛機友向你致敬🎉🎉🎉

[@modelmakingmaniacs8600]

Hi Steven. should be in Singapore in a few weeks.

[@piotrr5439]

Thanks for sharing. This worked for my model too.
What is the receiver number?
Is it written somewhere, something I get to choose or just an arbitrary number I need to know from somewhere?

[@modelmakingmaniacs8600]

You get to choose the receiver number. The system will warn you if another model is set up with the same receiver number.

[@akmalmarzuki8660]

Anyone able to off the gyro?? I use this protocol too but cant off gyro

[@bonzobreakfast1738]

I followed to the T and cant get mine bind. Same radio, brand new cub??

[@modelmakingmaniacs8600]

Model Settings: Mode - MULTI, V911S, RF Protocol - V911S, E119, Module Status: V13.3.14 AETR,

[@aldoguarasci9338]

HI,
I have an A160-J3, I would like to use it with a TX16S radiomaster. I have detected that you have a new V911 protocol card. Can you tell me on which channels I can set the other functions? 3G/6G - L,H etc.
Thanks and greetings, Aldo Guarasci

[@modelmakingmaniacs8600]

Channel 5 for the Rates. Switch A weight 100% "Rates". Channel 7 for the Modes, switch C, Weight 100%, "Modes"

[@pbciocon]

does this also work with other xk products?

[@modelmakingmaniacs8600]

Can't really say as the cub is the only one we have tried so far.

[@aldoguarasci9338]

HI,
I have an A160-J3, I would like to use it with a TX16S radiomaster. I have detected that you have a new V911 protocol card. Can you tell me on which channels I can set the other functions? 3G/6G - L,H etc.
Thanks and greetings, Aldo Guarasci

[@elelnoel5196]

Have you find the answer?

[@aldoguarasci754]

Good morning. I still haven't solved the problem. Channel 8 should allow me to switch 3G/6G but it doesn't. The model always remains stabilized. The original remote works quite well but I wanted to use the Radiomaster TX16S.
Greetings, Aldo Guarasci

[@davidtovey7885]

Hi I have the same problem did you solve it please ?

[@aldoguarasci9338]

Unfortunately I haven't solved it yet. I have consulted WLTOYS and I hope for their clarification. If I can solve it I will let you know.
Greetings, Aldo Guarasci

[@thomaskehrer7152]

@@aldoguarasci9338 Ch 6 Switches the Rates. Ch 7 switches the "Gyro". But I'm nit able to fully disable the Gyro. It just disables the mixing of aelerons and rudder.