I love the inventiveness. Although the screen is the least thing we pay attention. The mechanisms applied here could be more beneficial in other departments. Just keep going. We find out by freaking around, right? :)
I don't know much about Bluetooth connectivity, but BLE on Boxer board is just a serial port. TX's SYS key->HARDWARE(6/7)->scroll down you can find "Serial port", "AUX1", choose telemetry mirror. I think AUX1 is BLE port. And hardware, like HC-05 or HC-06(check master mode and slave mode availability), attach BLE on Boxer board. HC-05 or HC-06 is needed for setup by USB-UART setting tool. It is huge story, you can search bluetooth on TX16S, it has more information. Otherway, airport function on ELRS, it will be good alternatives.
www.radiomasterrc.com/products/pocket-radio-controller-m2 Scroll down and find Check "Gimbal Adjustment". (A L-R To switch M1/M2. Turn clockwise to disable self-centering (Throttle). Turn counterclockwise to enable self-centering (Elevator))
I really like your idea and the display with yellow taxt is lovely! Do you have information on how to connect this type of display and a suggestion where to buy one? I love the Pocket radio design but when you program models my 70 year old eys get tired of the small text. I would like to use your idea and buy a small plastic case or build a small ply box and mount it stationary in the top position.
1.54" OLED SPI intetface. OLED that I purchased : ko.aliexpress.com/item/32971511348.html?spm=a2g0o.order_list.order_list_main.43.56ba140fDwc9GB&gatewayAdapt=glo2kor
Wouldn´t it be possible, to put a RX5808 module inside the rc and connect a TFT-Display to it? Like at the DevoF4/F7, if you remember Walkera. It was really nice to have the 5.8ghz ground station inside the radio. cheerz!
Please follow this instructions : github.com/DongkwanYi/OLEDBOXER/blob/main/how_to_flash_firmware firmware for pocket : github.com/DongkwanYi/OLEDBOXER/tree/main/firmware All infos are here : github.com/DongkwanYi/OLEDBOXER
do you think it is possible to do this with a Full color tft oled screen? It would be really cool to have a tx16s type screen on a Pocket, especially with touch, I saw some very cheap screens on aliexpress
That's the type of Radio ive been looking for. Now can you add full size hall gimbals and get rid of that right handed scroll wheel cos in the western world not every one is right handed ... unlike China where you treated like a degenerate if left handed.
Mounting a full-size gimbal may be difficult due to size issues. Definitely need a back shell for left handed people. Nowadays, there is no prejudice against left-handed people. I'm a right handed, when I play the piano, I think I can make bass sounds louder and faster if I'm left-handed.
I hadn't realised how elegant the slider mechanism was, nice to see
Thank you!!!
I love the inventiveness. Although the screen is the least thing we pay attention. The mechanisms applied here could be more beneficial in other departments. Just keep going. We find out by freaking around, right? :)
Great point!
Great videos man, keep doing it please 🙏
Thank you!
I loved this OLED...
The slide version is not bad; it just needs more finishing touches.
Thank you, It is not intended for real use, it will need more dedicated work for real use.
I love how you MacGyver the screen on the radio. Impractical but still a cool concept. Keep at it👊😁
Thank you!!!
with this larger screen, a 3d print design similar to a frsky tandem or duplex will be interesting
Thank you for watching!!!
Great video 😊
Thank you!
Sei grande.. Anche se mi fai cambiare progetto ogni volta💪💪💪
Thank you!
this is SO cool
Thank you!!!
Sweet!!!
Thank you!!!!
Great job just a little 3d print work and it would be a great addition
Thank you for opinion!
please, do you know how to add Bluetooth support to Boxer for telemetry?
I don't know much about Bluetooth connectivity, but BLE on Boxer board is just a serial port.
TX's SYS key->HARDWARE(6/7)->scroll down you can find "Serial port", "AUX1", choose telemetry mirror. I think AUX1 is BLE port. And hardware, like HC-05 or HC-06(check master mode and slave mode availability), attach BLE on Boxer board. HC-05 or HC-06 is needed for setup by USB-UART setting tool.
It is huge story, you can search bluetooth on TX16S, it has more information.
Otherway, airport function on ELRS, it will be good alternatives.
How to selfcenture in radiomaster pocket stick ?
www.radiomasterrc.com/products/pocket-radio-controller-m2
Scroll down and find Check "Gimbal Adjustment".
(A L-R
To switch M1/M2. Turn clockwise to disable self-centering (Throttle). Turn counterclockwise to enable self-centering (Elevator))
I really like your idea and the display with yellow taxt is lovely! Do you have information on how to connect this type of display and a suggestion where to buy one? I love the Pocket radio design but when you program models my 70 year old eys get tired of the small text. I would like to use your idea and buy a small plastic case or build a small ply box and mount it stationary in the top position.
I hoped you explain the lcd cable adapter conversion steps. I understood it's 2 stage adapter but don't know the rest how you did it.
What oled screen ?
1.54" OLED SPI intetface.
OLED that I purchased : ko.aliexpress.com/item/32971511348.html?spm=a2g0o.order_list.order_list_main.43.56ba140fDwc9GB&gatewayAdapt=glo2kor
@radiomaster Should hear this improvement 😁
Thank you!
Have you tried full RGB color oleds with same pinout?
Full color screen is different matter. I'll not try it.
Full color screen is different matter. I'll not try it.
….sold jeti and every other radio…now radiomaster zorro all over…small radio…big screen!!!…
Yes, Zorro has big screen, small form factor!
Wouldn´t it be possible, to put a RX5808 module inside the rc and connect a TFT-Display to it?
Like at the DevoF4/F7, if you remember Walkera.
It was really nice to have the 5.8ghz ground station inside the radio.
cheerz!
Good idea! It is possible.
I really like this. You know if the AG01 gimbals mini the ones for the zorro. Can be used in this?
Thank you! I'm not sure about that. But It seems possible.
According to the info I seen it is not possible because they are to big.
oled should be a standard for bw radio
I agree!
Please advise where to buy these mobiles. Will use the display as you did.
Please tell me how you unlocked the file loader?
Please follow this instructions : github.com/DongkwanYi/OLEDBOXER/blob/main/how_to_flash_firmware
firmware for pocket : github.com/DongkwanYi/OLEDBOXER/tree/main/firmware
All infos are here : github.com/DongkwanYi/OLEDBOXER
You need a 3D printer😀
Definitely, good idea, but I have no time for 3D printer. :-(
do you think it is possible to do this with a Full color tft oled screen? It would be really cool to have a tx16s type screen on a Pocket, especially with touch, I saw some very cheap screens on aliexpress
Oh, It is very different matter. I think it would be better to make a small version to the tx16s.
@@celeselements its not supported or difficult? without touch only color tft screen possible?
Where is the code?
Please check the description!
github.com/DongkwanYi/OLEDBOXER
For what ???
Because, he can.
I prefer concept 1
Thank you for comment!
I like concept 1, too!
That's the type of Radio ive been looking for.
Now can you add full size hall gimbals and get rid of that right handed scroll wheel cos in the western world not every one is right handed ... unlike China where you treated like a degenerate if left handed.
Mounting a full-size gimbal may be difficult due to size issues.
Definitely need a back shell for left handed people.
Nowadays, there is no prejudice against left-handed people.
I'm a right handed, when I play the piano, I think I can make bass sounds louder and faster if I'm left-handed.
This is the shitest idea I've ever seen