That was phenomenal. This new XLX-2 is a complete game changer! Continuous back to back 100+ mph passes (with a GOLIATH of a motor no less), and the damn thing doesn't even break a sweat! 💪💪💪
That's amazing how many back to back 100mph runs without the esc getting hot, I really enjoy the on board shots they're so cool 😎 keep up the good work 👍 😃
Glad your V2 Infraction didn't get damaged Brandon. Super efficient system 👌 & monster electronics in that 7th scale Infraction. "I Luv it". Epic Vid as always buddy
Nice test on the 2028 800 kv in limitdew I built it was 105 to 100 mph about 5 times but the hoons got hot as well motor temp was 135 on an 80 degree day so I loved this test 🙏🙏🙏
Bro I cannot believe how big that freaking motor is! 😎🤔 Like WTF r u kidding me? I give you mad props on everything you do but my God, you got so much money in this I can't imagine...
Dude I feel your pain. Road temps here in Georgia are 130+ in the summer. But the upside is we have mild winters. My favorite time to do speedruns. Can't wait to get an XLX 2! That esc took some abuse. Great video. Thanks for sharing.
I haven't even tried the stock speed gear supplied with my brand new Infraction and I'm already thinking about upgrades;-) Congrats on the success with your cars and thanks for the videos....they are very helpful.
Hi there, I am new to this R.C thing, and have been following the built of the arma infraction v2 for a while. I would like to thank you for inspiring me to go out and buy the arma infraction v2. Hopefully the direction of my build will be very similar or the same as what you have done. There are so many good tips and advice on your channel, that it is almost impossible to do the wrong thing. Thank you again, and may your R.C become faster and faster.
Yep... Still hot in Florida! Elements of nature are taken over, nice scientific speed 🧐 run, I hope you find another way, to get better tires for stabilizing the road, a very nice one.👍
just a tip, you should try 39 39 gearing since the tyres arent actually that large,and if my 800kv and xlx2 syste in my kraton 8s exb can run 39/39 gearing im sure an infraction could also with an 1100kv, it would make it go faster ofc
Now that the XLX2 is launched, everyone is going to break their previous PB. And since you said the ESC can handle up to 500 amps, you should really try some speed runs with the limitless. I would say go with the biggest motor can that leaves enough room for 6 or 8s parallel setup, a lunatic gearing and considering how good you are at driving these monsters, I bet you ll break 160 mph. Maybe get in 170's
@@InnovationRC hey man back with a quick question. I want to run this setup in my limitless. My batteries are too tall and the body doesn’t sit right. What do you think I should do ?
I see that you put the motor on the right side. I put the smaller Hobbywing motor on the left side since it fits where the the stock motor was on my Felony. Very interesting that you can swap the position of the motor with the pps mount? I have that same mount. I just might swap out my Max 5 and 1100kv motor to the XLX2 and 1100kv motor. I have a couple of those extras.
Brother that motor is absolutely insane you killed it with the 100mph plus run with kraton now that’s innovation my brother keep rocking I got a question champ ?
@@angelteamnolimit624 website says 8s max. But I think you can push 9s if you can get that configuration with a higher voltage esc. Unfortunately that won't be possible with xlx2
Love this video. Went out and bought everything in it. I’m just stumped on where to get the motor mount and the other thing connected to it. That’s all I’m missing.
Thank you man. Ordered it!! Also I got a question about gearing. What spool gear size should I get? The one from the limitless? Also I like to bash my car as well. What’s a good gear setup with that motor combination? And what’s a great combo for drag racing?
What do you think about that 1100kv with the xlx2 setup in an xmaxx? With pretty much stock everything else (weight wise)? I run an 1100kv hobbywing in it now and it keeps temp, pretty good but not as good as my 800kv. Hobbywing of course. But ya get a more speed with the 1100 with the torque still. I find it to be a good balance without gearing to the moon So do you think the castle 1100 paired with that esc could handle some bashing?. And thank you for making these videos showing us new products and your crazy awesome builds! It is appreciated
Ha that’s kinda funny as soon as I started thinking about your tire temp one goes out lol. Those Florida roads are really rough too compared to other states.
Hey man. Been watching a few of your videos. Just got in to this hobby about 3 weeks ago. Got my self a XRT. Could you please explain to me what im seeing on your @4:42 with your radio? Thanks!
Hi , i have a 1:5 Carson dirt attack 6s buggy , i want to go 8s , can I use the xlx2 1100kv or should I use a lower kV motor? I thou about xlx2 1100kv , Hobbywing max5 800kv or the ztw 300a 620kv...i don't know if the weight of the car is relevant , it weighs 10kg . Please i really need help on this... I like your videos , thanks for uploading awesome rc content , keep it cool and stay safe bros
I have a 4s kraton with a 15th tooth pinion GEAR but its in shop right now getting New input gear put in it along with THE 15th tooth pinion GEAR with a 2400kv Motor 120Esc Ada SERVO With 2 Spectrums Batterys 1s a mah Lipo 14.8 100c the other 1 is the same but a 50c Lipo Battery
Love your videos!! I have a new infraction still dont know how to calibrate it?? But I'm a nitro guy..my first electric. Help plus I want to set it up for dragging..help anyone??
Wow!!! That seems like a great road course setup!!! What are your thoughts after 6 months? Is this what you would recommend? Ultimately I would be looking to do 2 laps, late afternoon (New England temps) 2.3 miles per lap, max speed 90 to 100mph. Do you think this is doable or not? I'll happily share video from my Camaro following my Infraction with a GPS overlay from.the app I use if I can get it done (or the half lap esc overheating footage... 😃
Perfect timing, I was just going to purchase electronics for my limitless the other day but the combo I wanted was out of stock. This was my exact goal to have a 60 mph basher but also something I could change a pinion and do a 100mph without having to worry about heat. So glad the other combos out of stock.
I have the hobbywing 1100kv in my limitless running a 50t spur with a 39t pinion. Thing is absolutely disgusting. It can take alot of full speed bashing before my max 6 gets too hot.
Dang I like building and all but would you ever take money and build that exact set up? I have the felony and it's brand new but I've bought a lot of hot racing parts have I went the wrong way?
I don't mind building for others. Unfortunately my time is valuable, if you want me to build it you will need to pay a labor fee. I feel you went the right way nothing to be worried about
@@InnovationRC thanks I appreciate it a lot!! So for bashing and maybe 100 mph I want to stay 6s what motor ESC would you do? TP and max 6? Or castle set up?
Hey Brandon who owns the fastest speeds on RUclips for the limitless and infraction? Also if its not you which you would be my bet, what's your PB for each vehicles?
Everything open wheel: Typhon 6s is 133 Mph Limitless 6s 136 Mph Infraction 8s 136 Mph Limitless 3s 105 Mph Limitless 4s 127 Mph I am by far not the fastest. I'm not competitive so I won't exactly do 150-160s I don't exactly desire to do so. Fastest guys with these cars are Philip Jolley and Raz. Over 160 with GT arrma vehicles.
Scotty. Getting ready to purchase a motor for my kraton 8s exb roller,was leaning towards the castle xlx2 1100kv combo. I'm in the process of finishing a 1/5 scale track 3 laps is just over 1 mile,and it's a fast track straight away speeds of 55mph plus. Would the 1100kv be a good choice, if so what would you suggest for gearing if I was to use the spur gear that is on it now 49 tooth I believe or should I put the 39 tooth speed gear on it.
HOW WOULD YOU WIRE 8 cells on a 1/5 Kraton with 1100kv motor and esc combo? Castle vs hobby wing? Can both combos handle the same wiring configuration to get the most out of 8 cells with an 1100kv esc combo?
If my limitless have 40 pinion and 39 in spur is overgearing right so that is my problem that i hear the motor to accelerate when i give just 50% of throotle mate?
I say in the video exactly my gear setup! Try and find it! It really doesn't matter for top speed what servo you go with as long as it has decent torque and preferably steel geared
Can I ask how you have that setup? I have a xlx2-2028-1100 kv combo and the mmx8s 2028-800 kv combo that I was going to put in 2 more of my xmaxx. But I just bought my first aarma.... the infraction v2 . I don’t keep anything stock . I’m a big castle creations fan . Any inside information would be appreciated. Thank you either way!
ITS a good Truck just Needs some UPGRADES to possibly make it bullet proof if thats Even possible i put loctite blue medium strength on my slipper Clutch Cause thats were it was given me the most Trouble
That was phenomenal. This new XLX-2 is a complete game changer! Continuous back to back 100+ mph passes (with a GOLIATH of a motor no less), and the damn thing doesn't even break a sweat! 💪💪💪
Yessir! That is definitely correct
That's amazing how many back to back 100mph runs without the esc getting hot, I really enjoy the on board shots they're so cool 😎 keep up the good work 👍 😃
Thanks on that. The little black dirt annoyed me the whole time though lol
Glad your V2 Infraction didn't get damaged Brandon. Super efficient system 👌 & monster electronics in that 7th scale Infraction. "I Luv it". Epic Vid as always buddy
Thanks on that! I like these monster electronics in it as well. Heavy and expensive but it's a one and done purpose
Nice test on the 2028 800 kv in limitdew I built it was 105 to 100 mph about 5 times but the hoons got hot as well motor temp was 135 on an 80 degree day so I loved this test 🙏🙏🙏
Thanks on that. That's awesome you gotta try this 1100kv though it's so well balanced.
Road temperature sucks
The ESC popping out the bed of the truck is super cool
Bro I cannot believe how big that freaking motor is! 😎🤔 Like WTF r u kidding me? I give you mad props on everything you do but my God, you got so much money in this I can't imagine...
Dude I feel your pain. Road temps here in Georgia are 130+ in the summer. But the upside is we have mild winters. My favorite time to do speedruns. Can't wait to get an XLX 2! That esc took some abuse. Great video. Thanks for sharing.
Appreciate you stopping by! Agreed winter is far more beneficial to run anything fast! A cool 60 degree day is what I wish for! Haha
Awesome!!!! I see you have the 34/39 gearing. What was the pinion count?
I haven't even tried the stock speed gear supplied with my brand new Infraction and I'm already thinking about upgrades;-) Congrats on the success with your cars and thanks for the videos....they are very helpful.
Thank you for the Clear Logging trick. Didn't know it prior.
🤘😁🤘
Can't wait. Set reminder, hopefully I can watch it tonight, but it premieres @ 12 midnight here in the UK 😴 If I'm still up I will tune in buddy.
Hi there, I am new to this R.C thing, and have been following the built of the arma infraction v2 for a while. I would like to thank you for inspiring me to go out and buy the arma infraction v2. Hopefully the direction of my build will be very similar or the same as what you have done. There are so many good tips and advice on your channel, that it is almost impossible to do the wrong thing. Thank you again, and may your R.C become faster and faster.
Like THE first guy said speechless man🏁
No one can say for a moment that you did not test the mess out of that system. Impressive video
Thanks Anthony I appreciate that.
Yep... Still hot in Florida! Elements of nature are taken over, nice scientific speed 🧐 run, I hope you find another way, to get better tires for stabilizing the road, a very nice one.👍
Appreciate that. I do plan on finding a solid tire. Or limiting power out to 80% I think 100 is a bit much to bash onroad with
just a tip, you should try 39 39 gearing since the tyres arent actually that large,and if my 800kv and xlx2 syste in my kraton 8s exb can run 39/39 gearing im sure an infraction could also with an 1100kv, it would make it go faster ofc
Bro that burger video is legend im getting an infraction today later in the day bro thanks
Very nice. Looks like 1100kv is the way to go
Nice video I bought one since February still didn’t drive it yet, was adding upgrades to it will post it
Now that the XLX2 is launched, everyone is going to break their previous PB. And since you said the ESC can handle up to 500 amps, you should really try some speed runs with the limitless. I would say go with the biggest motor can that leaves enough room for 6 or 8s parallel setup, a lunatic gearing and considering how good you are at driving these monsters, I bet you ll break 160 mph. Maybe get in 170's
500amps was unimaginable in my head a while ago 🤣
I can’t give you as many thumbs up as I want to. That’s awesome
I really appreciate that thanks!
@@InnovationRC hey man back with a quick question. I want to run this setup in my limitless. My batteries are too tall and the body doesn’t sit right. What do you think I should do ?
Did you use a different battery tray ?
What did you do?
I see that you put the motor on the right side. I put the smaller Hobbywing motor on the left side since it fits where the the stock motor was on my Felony. Very interesting that you can swap the position of the motor with the pps mount? I have that same mount. I just might swap out my Max 5 and 1100kv motor to the XLX2 and 1100kv motor. I have a couple of those extras.
Brother that motor is absolutely insane you killed it with the 100mph plus run with kraton now that’s innovation my brother keep rocking I got a question champ ?
Appreciate that for sure. What's your question
Innovation RC does that 1100kv hold 12s?
@@angelteamnolimit624 website says 8s max. But I think you can push 9s if you can get that configuration with a higher voltage esc. Unfortunately that won't be possible with xlx2
Twin turbo spooling nicely hahahaha.. Great video man !
bro those passes were a success, considering the fact that pavement is on 🔥 ...either way bro it was an awesome vid 💯💯👍👍👊👊
Thanks brother I appreciate that! Yeah Florida's heat never sleeps!
Very nice! That system can handle some serious torture. Worst thing holding us back are tires..
Yessir! It's always the rubber that fails... Hopefully not in most things 😂
@@InnovationRC Lmao!! good one.. 😀
Great video! Looks like a hell of system. Love your setup and install in the car. Looks great!
Thanks on that man!
Nice I’m surprised the tires are hotter than the motor what speed rates are those tires I ordered some trying to hit close to 150mph this summer
Love this video. Went out and bought everything in it. I’m just stumped on where to get the motor mount and the other thing connected to it. That’s all I’m missing.
Thank you! Go to
Practicalprototypesolutions.com
Thank you man. Ordered it!! Also I got a question about gearing. What spool gear size should I get? The one from the limitless? Also I like to bash my car as well. What’s a good gear setup with that motor combination? And what’s a great combo for drag racing?
@@ArtamusPrime1 yup
Wow, that’s good for hot Florida day! I’m sold!
Yessir it's very efficient!
You make legit videos! Keep it up!
Well done ! Back to back 100 mph 😜
Great video. I really like this channel
What do you think about that 1100kv with the xlx2 setup in an xmaxx? With pretty much stock everything else (weight wise)? I run an 1100kv hobbywing in it now and it keeps temp, pretty good but not as good as my 800kv. Hobbywing of course. But ya get a more speed with the 1100 with the torque still. I find it to be a good balance without gearing to the moon So do you think the castle 1100 paired with that esc could handle some bashing?. And thank you for making these videos showing us new products and your crazy awesome builds! It is appreciated
This setup is basically STAPLE for vehicles under 40lbs. Perfect for Xmaxx without having to gear to the moon
Sorry to see the Crash but looks like Nothing serious thankfully!! Very Nice runs mate. Well Built.
Dude awesome video as usual. Totally sick setup! Great job as usual!
Thank you sir!
Ha that’s kinda funny as soon as I started thinking about your tire temp one goes out lol. Those Florida roads are really rough too compared to other states.
You guessed it! 😬
Great work man I’m blown away by the speed sheesh
Haha thank you!
Hey man. Been watching a few of your videos. Just got in to this hobby about 3 weeks ago. Got my self a XRT. Could you please explain to me what im seeing on your @4:42 with your radio? Thanks!
Awesome video man, that rc is the bomb 💣💥💥💥💥💥
Thank you sir!
Great channel, I learn a lot from watching it... Do you use gyros at all mate? Are they Good or bad for speed runs?
Thanks man! I don't use gyros at all. My cars aren't built to go straight... They're built for the road I'm running on 😉
Ok thanks heaps mate, going through some more of your vids now, keep it up👍
Hi , i have a 1:5 Carson dirt attack 6s buggy , i want to go 8s , can I use the xlx2 1100kv or should I use a lower kV motor? I thou about xlx2 1100kv , Hobbywing max5 800kv or the ztw 300a 620kv...i don't know if the weight of the car is relevant , it weighs 10kg .
Please i really need help on this...
I like your videos , thanks for uploading awesome rc content , keep it cool and stay safe bros
I have a 4s kraton with a 15th tooth pinion GEAR but its in shop right now getting New input gear put in it along with THE 15th tooth pinion GEAR with a 2400kv Motor 120Esc Ada SERVO With 2 Spectrums Batterys 1s a mah Lipo 14.8 100c the other 1 is the same but a 50c Lipo Battery
Awesome video ! How do you get the GPS Mph to show up on this video . Is this a program or app or special unit in the car? Thanks Ryan in advance
Cool Video Bro
Liked And Subbed
👍
I have the hero 8 and would like to know how you get the speed on the recorded screen
Serious power! Great video👍👍
Yeah it's legit! Thanks man
Love your videos!! I have a new infraction still dont know how to calibrate it?? But I'm a nitro guy..my first electric. Help plus I want to set it up for dragging..help anyone??
Hey do you have an install video? I have that combo, car , mount,
killled that! and it has alot left to go. feel you could have did every bit of 120 with more road. Nice set up thats wicked!!
Was watching this to help decide if i want the 800 or 1100 in my xmaxx. Still debating what's best...
Go 1100. I reason why when I discuss the motor sizes against the 800kv
THAT WAS ABSOLUTELY FREAKIN BADASS BRO!!!
OMG!!!!! Speechless, great set up!
Awesome info you provided on this video bud, What weight oil you use on front and rear diffs?
Wow!!! That seems like a great road course setup!!! What are your thoughts after 6 months? Is this what you would recommend? Ultimately I would be looking to do 2 laps, late afternoon (New England temps) 2.3 miles per lap, max speed 90 to 100mph. Do you think this is doable or not? I'll happily share video from my Camaro following my Infraction with a GPS overlay from.the app I use if I can get it done (or the half lap esc overheating footage... 😃
As always another cool vid thanks.
Right u need a good balance in both worlds
Have a link to the lipos?also can you use the Bluetooth link on the xlx2?
love that motor mount where ca I get one
Castle motors are good but i prefer tp power motors. I hope you get the speed that you want 😉🔥
I love TP as well!
Amazing video, I run gopro hero7 black... what program you use to get the overlay to print the 6xs of a 100mph ordering the video?
Perfect timing, I was just going to purchase electronics for my limitless the other day but the combo I wanted was out of stock. This was my exact goal to have a 60 mph basher but also something I could change a pinion and do a 100mph without having to worry about heat. So glad the other combos out of stock.
I'm sure you'll certainly benefit from this video. I actually give the gearing I use in this run so you can do the same!
@@InnovationRC got a reminder set, Thank you very much.
@@blindj Anytime!
@@InnovationRC I've re-watched this video a couple times and maybe I've missed it but. What is the gearing you're using on this vehicle?
@@blindj 34/39
That is Amazing brother!!!!
im about to put this setup in my felony to use as a parking lot basher... thoughts?
Perfect for bashing. Kinda heavy though. 1717 1650kv would be lighter and still have a lot of punch
@@InnovationRC handbrake?
500 AMP!?!? That's crazy. #CastleCreations #mambaxlx2 That's an awesome setup!
Yes ma'am! CraZ indeed!
Very nice motor I have the 1717 in my typhion. What are the detentions on this are the6 the same as the 800kv 2828 😁 thanks
1100kv and 800kv are the exact same can size. A lot of torque just more rpm
I have the hobbywing 1100kv in my limitless running a 50t spur with a 39t pinion. Thing is absolutely disgusting. It can take alot of full speed bashing before my max 6 gets too hot.
Yessir. That motor is awesome in a 1/7 scale. I'd stick the xlx2 in it and let it continue eating all day. The weak point will be the max 6
What speeds was you reaching with that gearing
Just FYI you really need to keep those batteries off the blacktop road that material gets 160° just being in the sun
What camera and app are you using for that?
Good video 😊😊
엄청난 스피드에 놀랐어요!!!
Thank you 😊
Ever heard of wind drag?
Very nice build, what is the speed on 6s?
105-106 mph
@@InnovationRC so the passes in the vid are on 6s not 8s? :o
nice video, quick question are the XT-90 connectors good enough for the xlx2? would they handle the current?
I would say no to xt90. Use 6.5mm bullets or higher
Dang I like building and all but would you ever take money and build that exact set up? I have the felony and it's brand new but I've bought a lot of hot racing parts have I went the wrong way?
I don't mind building for others. Unfortunately my time is valuable, if you want me to build it you will need to pay a labor fee. I feel you went the right way nothing to be worried about
@@InnovationRC thanks I appreciate it a lot!! So for bashing and maybe 100 mph I want to stay 6s what motor ESC would you do? TP and max 6? Or castle set up?
Nice vid young fella
Thank you sir
Sick build 👍👍👊🏻👊🏻🇺🇸🇺🇸
Outstanding vid bro
Appreciate that 💪
Love the video brother that’s just awesome 🤙🏼
Hey Brandon who owns the fastest speeds on RUclips for the limitless and infraction? Also if its not you which you would be my bet, what's your PB for each vehicles?
Everything open wheel:
Typhon 6s is 133 Mph
Limitless 6s 136 Mph
Infraction 8s 136 Mph
Limitless 3s 105 Mph
Limitless 4s 127 Mph
I am by far not the fastest.
I'm not competitive so I won't exactly do 150-160s I don't exactly desire to do so.
Fastest guys with these cars are Philip Jolley and Raz. Over 160 with GT arrma vehicles.
I heard that Kim possible ringtone 😏
Where can I find one of those PPS motor mounts with the mesh adjustment screw?
Practicalprototypesolutions.com
@@InnovationRC I accessed the website, and he makes sales, because of your postings. Keep doing what your doing, we're watching.
☝️now that’s the question?? I’m lookn for that mount now.
Scotty. Getting ready to purchase a motor for my kraton 8s exb roller,was leaning towards the castle xlx2 1100kv combo. I'm in the process of finishing a 1/5 scale track 3 laps is just over 1 mile,and it's a fast track straight away speeds of 55mph plus. Would the 1100kv be a good choice, if so what would you suggest for gearing if I was to use the spur gear that is on it now 49 tooth I believe or should I put the 39 tooth speed gear on it.
39!
Great vid, Can't wait to get one
Is this straight out of the box or a build?
HOW WOULD YOU WIRE 8 cells on a 1/5 Kraton with 1100kv motor and esc combo? Castle vs hobby wing? Can both combos handle the same wiring configuration to get the most out of 8 cells with an 1100kv esc combo?
How are you running it at the end without the batteries in it???
Great video brother
Thank you man 💪
I'm sure that you're burning from the "happines".
What range extender are you running? Or which one do you recommend
I use this one. It's a complete your to install video too
ruclips.net/video/dy2aquVCGRY/видео.html
I am new to the hobby. Would you please define "geared to the moon" with some specific numbers? Thanks.
Anything that is overdrive, bigger pinion than spur gear is what I mean by "to the moon"
@@InnovationRC Thanks!! You keep posting content and I will keep watching it until the conclusion and commenting favorably. I am already a subscriber.
@@stankakol5195 thank you so much sir. I will attempt to provide you with videos to the best of my ability for you. Glad you enjoyed!
If my limitless have 40 pinion and 39 in spur is overgearing right so that is my problem that i hear the motor to accelerate when i give just 50% of throotle mate?
What gear setup is in there & which servo you recommend.
I say in the video exactly my gear setup! Try and find it! It really doesn't matter for top speed what servo you go with as long as it has decent torque and preferably steel geared
How would this setup do in a Traxxas sledge
You'd destroy the transmission. It isn't strong enough to handle this motor
@@InnovationRC do you have any suggestions on a motor ?
What kind of motor mount do you need to mount that motor to the arrma 6s
Where could I find a radio booster for signal range?
Castle 2028 1100kv or the 1721 castle motor for speed?
The 1100 will be more efficient. The 1721 will be superior when at power voltage, running 6s or 4s
Can you use the stock motor mount on the 1100kv motor...
No it won't fit unfortunately
@@InnovationRC ok thanks bro
How do you get the motors to work in sync? And are both esc in the same receiver? Thanks would help alot with mine
Can I ask how you have that setup? I have a xlx2-2028-1100 kv combo and the mmx8s 2028-800 kv combo that I was going to put in 2 more of my xmaxx. But I just bought my first aarma.... the infraction v2 . I don’t keep anything stock . I’m a big castle creations fan . Any inside information would be appreciated. Thank you either way!
Just need a bigger motor mount to put the bigger motor in the infraction! Flip the motor mount position as well and your golden
@@InnovationRC are there holes for the mount swap? Or do I need to make my own
I just bought everything to duplicate this truck. Have you done any suspension mods to it?
Nope! Just stiffen the rear end about a 1/8 inch down some and it'll handle being over 100 without squatting
@@InnovationRC Cool, thx! What part of FL? I’m in Tampa.
ITS a good Truck just Needs some UPGRADES to possibly make it bullet proof if thats Even possible i put loctite blue medium strength on my slipper Clutch Cause thats were it was given me the most Trouble
Plus i bought a Dynamite Temperature🔫 with laser sight Etc. Etc. Etc. Comes with a 9v battery