I don't know much about speed runs but you have balls of steel for not standing on a milkcrate or something with that thing flying by that fast. props haaha
Lol, I always try to stand right behind a telephone pole when doing my speedruns in hopes that if it skids in my direction, hopefully it will hit the pole instead of me! 😆 I have had close calls. And at speeds of 100mph+, there's barely any time to react!!
Best advice is never ever Jam on that brake mike or forget bout it tapping tapping tapping to it slows down putting pressure full throttle can heat stuff up and snap best of luck brother
@@angelteamnolimit624 I appreciate the advice man. It wasn’t an issue with braking. I’m posting a vid tomorrow or Monday that’ll explain more of what happened. Pretty bummed lol. I’ve made hundreds of passes and never wrecked before
I don’t own any TP motors. I use castle cans. But I’ve noticed the TP gets really hot. Is that correct? Amazing Video! I like and watch every video. You the man!!
Dam that things really shifting 😂 insane 😜 sounds awesome as it passes too. I struggling to find anywhere to run me felony on stock settings at full speed lol, let alone any faster 🤣
Freaking sweet! Wondering if you could somehow add a "starter" motor to give it a boost so you don't have to manually. Maybe somehow mount a gear to a one way bearing? Probably add more weight and resistance than its worth though...
How can you even see it at that speed? amazing, just amazing. I get worried with a 25mph closing speed let alone warp speed like this. So glad you filmed it and posted for all to see. Am going to subscribe 👍🍺.
That’s an awesome run! I just ordered at TP power motor 4050cm 3190kv with a xlx2 esc for my erevo 2.0. You think I’m overdoing it on the kv rating? Also using 2 traxxas 5000mah 3 cell 25C lipos
Fantastic - love your videos! I finally received my Castle XLX2 and the 2028 1100 - and while waiting I got a TP5870 1200 kv. Do you think the XLX2 can feed that motor with enough amps without cutting out? They still does not recommend on Castle’s website to use +56 TP motors with their XLX2. Stay safe 😀
I think you can use TP Motors...you just have to make sure they're Y-wind motors and not D-wind. The Castle ESCs can't handle the D-wind motors for some reason. TP has charts with which motors are Y or D. Its the first column on the chart under "T" (for timing I guess). You just have to pick from the ones that are 2Y, 3Y, 4Y etc..
@@george91871 Thanks George - I found out about the Y and D issue with XLX2 after buying the TP motor - and it is a 5D motor :-) So I am wondering which ESC would be better to use for that motor?. I have a 300A ZTW pro beast on the way, and another alternative could be a Hobbywing Max5 that I already have which is a 200A - however I did not pay attention to the huge amount of amps that this particular 5870 5D motor actually consumes. So I am just looking for some advice, trying to avoid a melt down.
@@alexbirkenfeldt1566 I don't have much experience using this level of power but I seen some people who do and I watch their setups very close. Noticed a LHS owner in my area had one of these ESCs (see below) in one of his cars. He was running 16S. I'd do more research on the company though. He also was using MaxAmps lipos (www.maxamps.com) and QS10 connectors. The ESC site is www.fliermodel.com. They seem to specialize in high power ESCs for cars, boats, etc.
@@george91871 I did look at Flier too - those are 400 amps - and huge - I guess I could do the trial and error way, starting low on voltage (4S or 6S) and conservative gearing (1:1) and then monitor temps closely. There should be an update on the way from Castle that allows D-wind motors and large can TP - however I am not sure what they will do besides build in limitations perhaps to avoid overheating. Thanks again George.
@@alexbirkenfeldt1566 We all are learning I guess. I'm in the process of switching from Spektrum to Castle. Everything is trial and error. Spektrum turned out to be an error for me. Problem with trial and error is that it can get costly. LOL But that's what makes it more fun as well. Good Luck!!!
Leopard motors perform like hobbywing and castle motors. High efficiency and torque, but not aggressive as TP. Of course variables of that depend on your setup and trigger pulls.
Thanks man! And great job taking steps up. Biggest thing I'd recommend is finding a road worthy of 150 mph. Need to stay consistent with the throttle too
Holly molly, you guys took speed run up several notches. You guys will laugh so hard when I bring my rc with a 540 silver can motor hook up to a 6 cell nicad battery.
I heard the castles are still alot more efficient but that tpr are the new torque king's is this accurate? I always knew castle as torque king's. The 1717 are insane for 6s 1/8.
153mph That is wild dude! Question,I'm getting my limitless Friday is the max8 2600kv a good setup? And what gearing? Not looking for crazy speeds! 60mph to 90mph and I'll be happy!
Next pass needs to be with 4 of the 6000 mah CNHL 4 cell lipos. And also 4 of the 9500 CNHL 4 cell lipos. I believe you could break 160 with that kind of set up
It's built just for my road! It will go straight every time. It isn't built by recommendations, because who else is running my road? Set your car up for your road, not for what others will say that'll make you fast.
Hi everyone. Can you please help me to understand the Kv on brushless motors? I would like to turn a monster truck (E-Revo) in to a fast speed run. SO, is it better a 2800Kv sensored or sensorless, or a 1900 Kv sensored or sensorless?? My understanding is that the 1900 will be faster but the 2800 will have more torque, so that I can achieve speed with larger gears. Is that right? many thanks
Opposite way around kv is like rpm. Rpm per volt. That's what k means 1000. V means volt. So 1000 rpm per volt. Higher kv more rpm and less torque. But more torque allows higher gearing. You can be fast with either. For a 6s setup I'd go 2800kv and 8s setup the 1900kv
Why switch from the Castle to the TP? Just curious. I went with a Castle setup in my Limitless speed build after watching these and now you're switching...
A motor doesn't make you fast. What you do with the setup will. BOTH motors are amazing. You are seeing me run a setup I worked out myself to make the motor perform really well. A motor doesn't make you fast... DON'T feel bad about your purchase. It will never replace my 1100.
@@InnovationRC yeah I get that. I'm just asking because you never know, you could've had problems that made you want to get rid of it. I haven't had any yet with my castle setup I was just curious what made you switch or if you were just trying it out.
@@invertedadventuresrc I think he answered it, showing how to make the motor perform well. He held his hand on the motor after each run showing it wasn't overheating or running high temps. I learned a lot in 8:01 is it something you missed?
Sounds awesome, looks awesome, but man are you taking an enormous risk standing in the road as it goes by. Please be super careful and stand at least 75 feet away from it. Maybe they’re a hill or slight hill just off the road. Just a concerned watcher
the noise you discribe as a machine gun has not much to do with the force of the magnets , but everything with slots and a gap between it and the rotor , if you take an evenly powerfull lehner motor , you dont have any machinegun sounds to begin with ;)
I have a 2510 kv 6pole tp I have a xlx2 esc but I keeps bogging out the motor is the same motor as the one ran in the video just a higher kv 31 pinion 41 spur please help me my wires get extremely hot
I know you add 4s with 4s to make 8s can you add 6s with 6s to make 12s or is that to powerful for the motor or is 12s not a thing I’m new to the rc world
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
I don't know much about speed runs but you have balls of steel for not standing on a milkcrate or something with that thing flying by that fast. props haaha
I'm with you boss, no way, camera man is smart. I like his video but can't watch.
I was thinkin the same no way whould i wanna stand infront ot that !
Lol, I always try to stand right behind a telephone pole when doing my speedruns in hopes that if it skids in my direction, hopefully it will hit the pole instead of me! 😆 I have had close calls. And at speeds of 100mph+, there's barely any time to react!!
Ive had a 1/16 scale rc going about 30mph hit me in the ankle. I was limping for a week. These could totally amputate you
Great run bro! I just had my first wreck today. 154mph open wheel limitless. Had trouble on deceleration
Best advice is never ever Jam on that brake mike or forget bout it tapping tapping tapping to it slows down putting pressure full throttle can heat stuff up and snap best of luck brother
@@angelteamnolimit624 I appreciate the advice man. It wasn’t an issue with braking. I’m posting a vid tomorrow or Monday that’ll explain more of what happened. Pretty bummed lol. I’ve made hundreds of passes and never wrecked before
@@MikeStallone it happens to all of us brother build destroy rebuild good luck for the next one Awsome speed brother
Yesirrrrrrrrrr let’s go champ just bought that motor combo setup for my all carbon infraction can’t wait 😊
Upload a video 🙃
@@shhhh6986 rainy in jersey last few days soon we will be good again
Calm down Shannon briggs
Really wanna see a video on that!
The king of speed! Congratulations Brandon!
That 🍭 Paint tho 👀🤯😵... I had to keep rewinding to the switch to 8s right before the pushoff close UPS 😎💯🤦🏾♂️
Wow!!! The speed runs are more bananas then the tires!!!!
🎉 congratulations 🍾🎉
Thank you!
Nice pass👍 good to see you change things around to see what happens 😎
Thanks Andrew! Definitely needed another flavor
153 MpH.. very cool. Congrats My Man
Awesome!
Amazing run
WOW what a noise that makes on full chat 🔥 awesome 👍👌👍
I don’t own any TP motors. I use castle cans. But I’ve noticed the TP gets really hot. Is that correct? Amazing Video!
I like and watch every video. You the man!!
Thanks man! I appreciate you enjoy the content!
Tp "can" get hot. Any motor can get hot. You just need to gear it right and it'll perform great
Excellent pass, congrats bro!!!
4+4=8? Oh shit!!
Great Video.
Nice video bro 😎 !!! Watching from Paris ❤
Great vid man that is awesome.I keep trying to find roads in Ocala with no luck hopefully someday I can go with Steven lol
Love the paint job
Nice review.👏👏👏
Thank you for sharing a great video.
Have a good day. 💪😊💪
Dam that things really shifting 😂 insane 😜 sounds awesome as it passes too.
I struggling to find anywhere to run me felony on stock settings at full speed lol, let alone any faster 🤣
Nice pass, ive been thinking about getting one of those motors. Nice pass
What’s up bro you’re awesome dude
Sweet build! Straight violent!
Thank you sir! I really appreciate that!
Awesome bro
Thanks!
Very impressive. Awesome video!
Straight pressure 💪🏾💯
this is incredible speed for rc car
Freaking sweet! Wondering if you could somehow add a "starter" motor to give it a boost so you don't have to manually. Maybe somehow mount a gear to a one way bearing? Probably add more weight and resistance than its worth though...
Crazy fast 😆
I have builds that the fan isn’t touching the motor. Gotta do what you gotta do!!
How can you even see it at that speed? amazing, just amazing. I get worried with a 25mph closing speed let alone warp speed like this. So glad you filmed it and posted for all to see. Am going to subscribe 👍🍺.
WOW 😳
wow that sound! awesome!!
Me sitting here watching it while staring at my 1:10 scale with a tiny brushless motor (topspeed 37 mph)
Lol
Same! 😂
Superbe pilote Superbe mécanicien
Nice run!
OMG
Awesome video
I can't see the car🤣🤣🤣
Very fast
I'm new subscriber from Indonesia👋
Greeting one remote from Indonesia👋
TP motor did not perform bad at all. Great job my brotha 👏🏼💪🏽👍🏼
I like the 1717-1650kv that belongs in the XO-1
Just love what u do bro
That’s an awesome run! I just ordered at TP power motor 4050cm 3190kv with a xlx2 esc for my erevo 2.0. You think I’m overdoing it on the kv rating? Also using 2 traxxas 5000mah 3 cell 25C lipos
What pinion are you running on
@@josephpeart4122 I was running 27/46, I since switched to the castle 1721 2400kv, on 34/36 I hit about 97mph on the erevo 2.0
151mph 4sho 👏👏👏
TP motor go BRRR
A10 warthog style 😂
That car is bad ass
Add the 6s in series with the others and just see what it does lol
What gear setup do you run in spartan ??????
crazy. cool!
Hey dude who makes that kick ass motor mount setup?
Bob Mahoney, look up Practical prototype solutions
Sick bro! Are you done w the castle 1100?
Never done with the 1100. Just using another motor from a vehicle I sold
🇮🇩 Amazing speed 👍
I like your video ✔
What gear in that setup bro?
Fantastic - love your videos! I finally received my Castle XLX2 and the 2028 1100 - and while waiting I got a TP5870 1200 kv. Do you think the XLX2 can feed that motor with enough amps without cutting out? They still does not recommend on Castle’s website to use +56 TP motors with their XLX2. Stay safe 😀
I think you can use TP Motors...you just have to make sure they're Y-wind motors and not D-wind. The Castle ESCs can't handle the D-wind motors for some reason. TP has charts with which motors are Y or D. Its the first column on the chart under "T" (for timing I guess). You just have to pick from the ones that are 2Y, 3Y, 4Y etc..
@@george91871 Thanks George - I found out about the Y and D issue with XLX2 after buying the TP motor - and it is a 5D motor :-) So I am wondering which ESC would be better to use for that motor?. I have a 300A ZTW pro beast on the way, and another alternative could be a Hobbywing Max5 that I already have which is a 200A - however I did not pay attention to the huge amount of amps that this particular 5870 5D motor actually consumes. So I am just looking for some advice, trying to avoid a melt down.
@@alexbirkenfeldt1566 I don't have much experience using this level of power but I seen some people who do and I watch their setups very close. Noticed a LHS owner in my area had one of these ESCs (see below) in one of his cars. He was running 16S. I'd do more research on the company though. He also was using MaxAmps lipos (www.maxamps.com) and QS10 connectors. The ESC site is www.fliermodel.com. They seem to specialize in high power ESCs for cars, boats, etc.
@@george91871 I did look at Flier too - those are 400 amps - and huge - I guess I could do the trial and error way, starting low on voltage (4S or 6S) and conservative gearing (1:1) and then monitor temps closely. There should be an update on the way from Castle that allows D-wind motors and large can TP - however I am not sure what they will do besides build in limitations perhaps to avoid overheating. Thanks again George.
@@alexbirkenfeldt1566 We all are learning I guess. I'm in the process of switching from Spektrum to Castle. Everything is trial and error. Spektrum turned out to be an error for me. Problem with trial and error is that it can get costly. LOL But that's what makes it more fun as well. Good Luck!!!
Do you have any experience with leopard motors? if so, how would you compare them with tp motors?
Leopard motors perform like hobbywing and castle motors. High efficiency and torque, but not aggressive as TP. Of course variables of that depend on your setup and trigger pulls.
Bro. Damn. You gotta share what gears your running. Is there a way I can pm you?? Please. Lol
Awesome run brother just awesome I hit 111mph I’m trying to get to 150+mph any tips bro stay safe bro 🤙🏼
Thanks man! And great job taking steps up. Biggest thing I'd recommend is finding a road worthy of 150 mph. Need to stay consistent with the throttle too
Thats a very nice body on that car what is it and where can I get one? awesome work on that rin that thing is flying.
Holly molly, you guys took speed run up several notches. You guys will laugh so hard when I bring my rc with a 540 silver can motor hook up to a 6 cell nicad battery.
We all started with a silver can brushed motor and 6 cell nimh/nicad battery 😉 thanks for watching!
Looks like South Florida?
Indeed
How do you do your alignment. Every one of your cars shoot straight. Any tips would help. Thanks
It's aligned for my road. Slight crown to the left. Compensate to the right. Rotate tires every 2-3 runs to ensure it's even
That thing is so fast it needs insurance hahahahha
Can someone tell me where is this road located exactly? Going for a vacation in Florida and will like to run my RC here
Nice first pass. Curious to what you have more to show us!
Are you using any sort of anti spark?
This is much better and realistic than kevin talbots' project record car...
Glad you enjoyed the realism!
I heard the castles are still alot more efficient but that tpr are the new torque king's is this accurate? I always knew castle as torque king's. The 1717 are insane for 6s 1/8.
👍
Holy sheep Dip Throbin 😂😉
153mph for an rc car is mind blowing.
201 is the record
Make that 214 mph
153mph That is wild dude! Question,I'm getting my limitless Friday is the max8 2600kv a good setup? And what gearing? Not looking for crazy speeds! 60mph to 90mph and I'll be happy!
this is probably a dumb question, but is the motor brushed?
Brushless 😉
Where can you get the body?
Next pass needs to be with 4 of the 6000 mah CNHL 4 cell lipos. And also 4 of the 9500 CNHL 4 cell lipos. I believe you could break 160 with that kind of set up
I intend on trying 4 9500s, I don't have them yet tho...
What gearing you running?
How did you mount those skirts to the stock chassis?
Whats a good tp power kv for bashing n some speed runs on a kraton exb on 6s
Can someone explain how this thing stays straight and how it gets lined up straight from the u turn 🤔
It's built just for my road! It will go straight every time. It isn't built by recommendations, because who else is running my road? Set your car up for your road, not for what others will say that'll make you fast.
How much timing are you running on that big can
Hey man where do i buy the tires i tried going on one website but it was a spyware website b
Hi everyone. Can you please help me to understand the Kv on brushless motors? I would like to turn a monster truck (E-Revo) in to a fast speed run. SO, is it better a 2800Kv sensored or sensorless, or a 1900 Kv sensored or sensorless?? My understanding is that the 1900 will be faster but the 2800 will have more torque, so that I can achieve speed with larger gears. Is that right? many thanks
Opposite way around kv is like rpm. Rpm per volt. That's what k means 1000. V means volt. So 1000 rpm per volt. Higher kv more rpm and less torque. But more torque allows higher gearing. You can be fast with either. For a 6s setup I'd go 2800kv and 8s setup the 1900kv
@@InnovationRC You are awesome! thanks for that. would you spend one more minute in telling me your opinion about sensored or sensorless? many thanks
What is the squiggly thing up front??
It is the quickbolt attachment to my gps so it doesn't fly out of the car incase of a crash. Zip ties won't hold in the event of one
@@InnovationRC awesome!! Super trick!! 😎🤘 Thanks 👍
@@InnovationRC so question. What esc would you pair with the kill mode tp motor? Max 5 or max 6? Or the castle? Castle has high kv problems...?
Perfectly 😜
Is this motor similar to hobbywing 1100kv?
Why switch from the Castle to the TP? Just curious. I went with a Castle setup in my Limitless speed build after watching these and now you're switching...
A motor doesn't make you fast. What you do with the setup will. BOTH motors are amazing. You are seeing me run a setup I worked out myself to make the motor perform really well. A motor doesn't make you fast... DON'T feel bad about your purchase. It will never replace my 1100.
@@InnovationRC yeah I get that. I'm just asking because you never know, you could've had problems that made you want to get rid of it. I haven't had any yet with my castle setup I was just curious what made you switch or if you were just trying it out.
@@invertedadventuresrc I think he answered it, showing how to make the motor perform well. He held his hand on the motor after each run showing it wasn't overheating or running high temps. I learned a lot in 8:01 is it something you missed?
How do u steer going that fast? How can u see it?
You don't steer lol it's also somewhat easier to see in real life other than video
If you steer you crash.
Sounds awesome, looks awesome, but man are you taking an enormous risk standing in the road as it goes by.
Please be super careful and stand at least 75 feet away from it. Maybe they’re a hill or slight hill just off the road.
Just a concerned watcher
Is like to see what the tp 5684 would do being a small amount longer
what would you say is not warm at all, if you had to guess 90-110f or is is somting more, i just wanted to know what is "warm" thanks!
It's run, moderately geared, just under 100. His isn't moderately geared.
Jesus how much range you got?
Never enough haha!
What gear setup are you running?
the noise you discribe as a machine gun has not much to do with the force of the magnets , but everything with slots and a gap between it and the rotor , if you take an evenly powerfull lehner motor , you dont have any machinegun sounds to begin with ;)
What controller do you use
It is a Futaba 4pm
Could you please give me the link the the motor mount please 🥺
how long your tires last
20-40 runs at full speed
@@InnovationRC you got a link for those tires ?
Please put a GoPro in the car it's going to look epic..
It's been done! Check out more of my videos!
I have a 2510 kv 6pole tp I have a xlx2 esc but I keeps bogging out the motor is the same motor as the one ran in the video just a higher kv 31 pinion 41 spur please help me my wires get extremely hot
what motor
Have u made spartan rc car yourself or bought?
If u have made it yourself please can u tell me how and list out the materials and the base and spoiler.
Please!
Completely made myself, based off an Arrma Infraction chassis
What radio r u using?
I know you add 4s with 4s to make 8s can you add 6s with 6s to make 12s or is that to powerful for the motor or is 12s not a thing I’m new to the rc world
What gears you’re using