Wow thats a beast of an esc. Awesome video and great way to explain everything on the castle link. That is one of the best features on the castle stuff.
If you're looking for an easy mounting solution for the x-maxx. WFO's esc mounting plate and rx box for max5 works perfectly with xlx2. Bolts on esc plate line up perfectly and mounts the xlx2 as low as possible in the chassis.
I just got mine set up thanks for the help boss! Hopefully it doesn't spontaneously combust when I plug the batteries in and run it for the first time.
And if you have a mounting plate for the hobbywing max 5 esc, the holes on the bottom of the XLX2 are the same so that's a win right there. I'm going to use the max 5 mounting plate from smc for the Outcast 8s. It fits the XLX2 perfectly for example. It's been done already 👍
Awesome man.. That xl2 is beast... Pricey combo but worth it huh 🤔 🧐 🧐 I got hobbywing max 5 combo in xmaxx... Next I'ma try castle 1100 kv combo 🤷🏾♂️
I put the 1100 KV and XLX2 in my X-Maxx it's been great ...I run my BEC at 7.5 volt and the AUX wire mode for Crawler so I can switch drag break on and off ...The channel I use for AUX wire mode I can adjust the end points to restrict the amount of drag when AUX is enabeled...
@@ExocagedRC 50 spur and 43 pinion right now ...going to need to try your set up ....motor gets a little hot , esc seems to be fine...Castle has not sent cap pack or fans yet...From log cap pack may not be needed...
I have punch control set to 50 percent on mine. Its on a DBXL-E 2.0. It was really violent launch from take off. Was afraid of breaking gears in rear diff. Even at 50 percent it will still do wheelies from a launch. 🙂
Nice info man, I haven't use a Castle esc for a few years now ,because when I needed to change settings at the track I could not do that, so I bought a hobby wing with a program box, that what Castle needs for there esc a program box so guys can change setting at the track, I love this new XLX2 but why just 8s what about 8s 10s or 12s this esc would be a bit more user friendly .
Castle does have a Bluetooth set up so you can mess with the settings at the track without having a computer you can simply link it bluetooth to you phone via castle b link and change everything just like on the laptop I love it #exocaged rc I got a question for you if you ever have some time would be great to see if you have an answer
Question, with Hobbywing and Castle what are average motor temps? What is considered to hot that it would cause damage? Putting in larger spur gears does cause my motor to heat up more than the original setup. Thanks for what you do bro!! You’ve helped me to open my eyes to upgrading my motors and esc’s. Almost finished w my Mojave upgrades, m2c, Max 6 w/1600kv and 20 T pinion. Can’t wait to get it out and raise Cain! Bought it a month ago and man I wish I’d know they were doing the EXB roller!!!! Would’ve saved me a ton of coin!!!
Most I've seen on one of these big motors is about 150 degrees or so. They are so big they just move things easily. Now gearing up insanely for super speed can heat them up.
Do a comparison in the Xmaxx I remember you saying if castle ever makes a 1100kv motor That you will use that I wonder if it’s really that big of a difference compared to the 800kv
@@ExocagedRC yea ive seen all the others as soon as you post them. Im saying on the castle link on laptop. You didnt go through the 1 option n said to comment if we wanted to see that. I pre ordered my xlx2 combo 2 days ago. Jus waiting now
The consensus so far on the groups is the 1100kv is almost undrivable in an xmaxx, impossible to keep the front down 🤣🤣 maybe it will be better in a k8s due to more weight
So both wires from reciever get pulled out when programming? You should do a full video on you programing and how to connect everything and everything thats needed to do so. Would be very helpful!
@@ExocagedRC wow. Yeah i totally didn't think of that. Well now I feel dumb hahahaha. I got to say tho castle really is a step above the game. The fact that you can buy rx wires when yours break or get pinched is a game changer. My wfo receiver box actually pinched mine so ordered a new one. Thanks again for the help with the xlx2 and programing ect. Happy holidays.
From what I've heard, the ec5 connectors are only 120 amp, it needs 150 amp connectors and recommend 200 amp connectors. Pay attention on the videos where the xlx2 catches fire and see if you can see what connectors are being used.
So when it comes to castle link, you basically have nothing plugged into it other than the castle link and the USB cable? So no external battery power or anything? I've never used castle link before, I've never actually even had castle electronics and I just ordered a 1650kv 1520 motor and the mamba monster x 6s esc. I wanted to calibrate the ESC using the software because it looks really clean and simple.
Are the sensor wires connected directly to the ESC the same between the monster x and xlx2? My xlx2 came WITHOUT the harness coming out of the ESC to connect the sensor wire on the motor. 🙄
the sensor plug is in with the main harness, it can be removed and you can use a servo male-male extension to program of check datalogs without getting to the receiver
I feel the 1100 is stronger but it pulls more amps, the newest firmware IMO makes the 1100 the better choice now. But the 800 is still seriously strong!
Mine burned up. It toasted the bullets at the ESC. Too much? Ran it in a DBXLE with XLX 2 and a 1100 Kv. Too many amps? The ESC doesnt respond anymore I think Castle gave me something that isnt possible. I have SMC 9700 Mhr batts. It was fun till the fire...HELP!
What gear pitch you running on your pin/spur? I keep destroying mod 1.5 from a b&m and fastlane. The weight of them, spinning at high speed makes them come apart. It seems like most people end up ditching the belt drive eventually so I don’t think that an option.
Hi m8. Do you have any experience with this Mamba xlx2, that it will not turn the motor and its diff. to "program" through a Spektrum Rx ? Thx from Denmark
Only one I know of that has built in Bluetooth is the AXE for crawlers and thats amazing!! Have I missed something? Has Hobbywing updated the others? I need to check!
I'm thinking about putting that set up in my dbxle, would it be much of a difference in performance and speed, or is it not much of a gain compared to stock?
I'm currently having an issue with my xlx2, and I know you're pretty familiar with the xlx2 from using it so much. To put it as short as possible, when my vehicle is at a standstill and I give it throttle to accelerate, it accelerates normally, but as soon as I let off, let it roll for a few seconds then get back on the throttle, it'll brake. It will roll completely freely, until I apply throttle again... I have no drag brake enabled by the way. I apologize for the long comment on an old video, but I just wanted to see if you had any insight on this issue.
Awesome brother... I just got the same setup... not sure what im going to put it in first. Love ur channel and would love ur feedback on mine. FX RC Thanks and keep up the Amazing videos brother!!!
I currently running old xlx 8s in my Losi Dbxl-e stock motor it came with it will not pop wheelie will the new. Xlx2 1100 kv combo get the front wheels up?!
I'm excited to see this...everyone speed runs with this esc im excited to see a bash video with it
Wow thats a beast of an esc. Awesome video and great way to explain everything on the castle link. That is one of the best features on the castle stuff.
Thanks 👍
If you're looking for an easy mounting solution for the x-maxx. WFO's esc mounting plate and rx box for max5 works perfectly with xlx2. Bolts on esc plate line up perfectly and mounts the xlx2 as low as possible in the chassis.
I just got mine set up thanks for the help boss! Hopefully it doesn't spontaneously combust when I plug the batteries in and run it for the first time.
And if you have a mounting plate for the hobbywing max 5 esc, the holes on the bottom of the XLX2 are the same so that's a win right there. I'm going to use the max 5 mounting plate from smc for the Outcast 8s. It fits the XLX2 perfectly for example. It's been done already 👍
Rumor has it that the new TESLA ROADSTER is powered by exactly the same combo...
...what a beast!!!
I think showing the motor set up would help alot of people 👍
Looking forward to getting the xlx2 thanks for the info
Cool. I found them on Amain and I doubt they will last long.
@@ExocagedRC thanks I looked last week was none must of just came into stock
Just got it!!
Thank you for doing this video! Really helped 😎
Awesome man.. That xl2 is beast... Pricey combo but worth it huh 🤔 🧐 🧐 I got hobbywing max 5 combo in xmaxx... Next I'ma try castle 1100 kv combo 🤷🏾♂️
I put the 1100 KV and XLX2 in my X-Maxx it's been great ...I run my BEC at 7.5 volt and the AUX wire mode for Crawler so I can switch drag break on and off ...The channel I use for AUX wire mode I can adjust the end points to restrict the amount of drag when AUX is enabeled...
What gearing are you using? I plan to run the same 45t pinion and 54t spur I had on the 800kv.
@@ExocagedRC 50 spur and 43 pinion right now ...going to need to try your set up ....motor gets a little hot , esc seems to be fine...Castle has not sent cap pack or fans yet...From log cap pack may not be needed...
@@ExocagedRC I am having issues with pinion staying in place ..I use loctite medium...should I go to high strength?
I'm using the little Bluetooth link thing. It was a breeze to set up the basic stuff. No data logging yet though through Bluetooth.
That is insane awesome man
I have punch control set to 50 percent on mine. Its on a DBXL-E 2.0. It was really violent launch from take off. Was afraid of breaking gears in rear diff. Even at 50 percent it will still do wheelies from a launch. 🙂
Dang!! Now I need to get another RC to put it in!!! I wonder what it’d do in a mini Maxx?!?!😂😈
Awesome video
That is going to an AWESOME stroked, blown big block motor in your XMAXX!!!! 👍👍👍
Yes it will
Nice info man, I haven't use a Castle esc for a few years now ,because when I needed to change settings at the track I could not do that, so I bought a hobby wing with a program box, that what Castle needs for there esc a program box so guys can change setting at the track, I love this new XLX2 but why just 8s what about 8s 10s or 12s this esc would be a bit more user friendly .
I wish it was 12s I really do.
Castle does have a Bluetooth set up so you can mess with the settings at the track without having a computer you can simply link it bluetooth to you phone via castle b link and change everything just like on the laptop I love it #exocaged rc I got a question for you if you ever have some time would be great to see if you have an answer
Box should say "stupid power in the palm of your hand"
Question, with Hobbywing and Castle what are average motor temps? What is considered to hot that it would cause damage? Putting in larger spur gears does cause my motor to heat up more than the original setup. Thanks for what you do bro!! You’ve helped me to open my eyes to upgrading my motors and esc’s. Almost finished w my Mojave upgrades, m2c, Max 6 w/1600kv and 20 T pinion. Can’t wait to get it out and raise Cain! Bought it a month ago and man I wish I’d know they were doing the EXB roller!!!! Would’ve saved me a ton of coin!!!
Most I've seen on one of these big motors is about 150 degrees or so. They are so big they just move things easily. Now gearing up insanely for super speed can heat them up.
Great video bro!! One thing tho. It’s an XLX2 not XL2. XL2 is an old castle esc that’s been discontinued for years now.
yeah I have no idea why I kept missing the x at the end.
Do a comparison in the Xmaxx I remember you saying if castle ever makes a 1100kv motor That you will use that I wonder if it’s really that big of a difference compared to the 800kv
I put the 1600 kv in mine w a max 5. It tears it up!! I put a 40 tooth pinion on it too!!
I got two of these combos so one is in the Kraton now and other goes in the Xmaxx
Great video…almost had a seizure watching that computer screen loljk
Would love to see the motor test & other tuning options it opens
I've shown it on several vehicles now
@@ExocagedRC yea ive seen all the others as soon as you post them. Im saying on the castle link on laptop. You didnt go through the 1 option n said to comment if we wanted to see that. I pre ordered my xlx2 combo 2 days ago. Jus waiting now
Imagine putting that esc on a smaller motor
The consensus so far on the groups is the 1100kv is almost undrivable in an xmaxx, impossible to keep the front down 🤣🤣 maybe it will be better in a k8s due to more weight
OH man I love hearing that!!!! WOOHOO!!!
Am picking up my Losi DBXL E nextweek, The Castle 1100Kv is out of stock everywhere, Is there a big difference between the 800Kv vs the 1100Kv?
So both wires from reciever get pulled out when programming? You should do a full video on you programing and how to connect everything and everything thats needed to do so. Would be very helpful!
I take both out. While it’s mounted you can remove the big wire plug from the esc and program it that way.
@@ExocagedRC wow. Yeah i totally didn't think of that. Well now I feel dumb hahahaha. I got to say tho castle really is a step above the game. The fact that you can buy rx wires when yours break or get pinched is a game changer. My wfo receiver box actually pinched mine so ordered a new one. Thanks again for the help with the xlx2 and programing ect. Happy holidays.
OMG, I just wet myself 🤣😂😅! I know you've got some stellar plans for this setup. Could ic5 connectors work with the XLX2?
yeah, I'm still on the XT90's and I think they could be an issue with an esc this size on something like the DBXLE as it pull insane amps.
From what I've heard, the ec5 connectors are only 120 amp, it needs 150 amp connectors and recommend 200 amp connectors. Pay attention on the videos where the xlx2 catches fire and see if you can see what connectors are being used.
I have an outcast exb sitting in the house empty of electronics.
I'm still undecided which motor esc combo to go for.
I'm leaning towards this.
And...
Great review 👍👍
I just have had really bad experience with castle esc’s in the past so I’m interested to see how this x2 is ??
I've killed every brand of esc out there but most hold up well if you motor battery and gear correctly.
So when it comes to castle link, you basically have nothing plugged into it other than the castle link and the USB cable? So no external battery power or anything? I've never used castle link before, I've never actually even had castle electronics and I just ordered a 1650kv 1520 motor and the mamba monster x 6s esc. I wanted to calibrate the ESC using the software because it looks really clean and simple.
Correct. No battery needed
@@ExocagedRC Thanks for the speedy reply 👍
very good video,do you prefer this castle link over B link?
I've never messed with the B link
Gute alte Mamba, aber das BEC darfst du nicht benutzen !, immer mit extern BEC System !
What is your all time favorite set up for the XMaxx for speed and bash ability?
cool
Do you recommend the M2c mount and brace for the Xmaxx?
Are the sensor wires connected directly to the ESC the same between the monster x and xlx2? My xlx2 came WITHOUT the harness coming out of the ESC to connect the sensor wire on the motor. 🙄
the sensor plug is in with the main harness, it can be removed and you can use a servo male-male extension to program of check datalogs without getting to the receiver
Will that 1100kv can fit a arrma talion mount or is it to wide of a can?
no sir, this is about the size of a soda can.
What’s your thought about putting it in the XRT?
Which motor of the two is the strongest...1100 or 800kv ?
I feel the 1100 is stronger but it pulls more amps, the newest firmware IMO makes the 1100 the better choice now. But the 800 is still seriously strong!
Mine burned up. It toasted the bullets at the ESC. Too much? Ran it in a DBXLE with XLX 2 and a 1100 Kv. Too many amps? The ESC doesnt respond anymore I think Castle gave me something that isnt possible. I have SMC 9700 Mhr batts. It was fun till the fire...HELP!
2028 800kv or 1100k-- what one is better
Why did they make the xlx2 so big but keep it 8s???? If its still 8s what the point in upgrading? Is the bec way stronger or????
IDK man, I wish it was 12S I really do. Its about AMPS, this esc is strong enough to handle any current battery you can throw at it.
@@ExocagedRC a nice 12s-15s esc from castle that doesn't cost 2000 like some company's charge would be awesome.
What gear pitch you running on your pin/spur? I keep destroying mod 1.5 from a b&m and fastlane. The weight of them, spinning at high speed makes them come apart.
It seems like most people end up ditching the belt drive eventually so I don’t think that an option.
in both the xmaxx and kraton I'm currently using the stock mod1 gears without issue.
Hi m8. Do you have any experience with this Mamba xlx2, that it will not turn the motor and its diff. to "program" through a Spektrum Rx ?
Thx from Denmark
What fan did you have hooked up to the mmx8s? Also is it plugged into the fan plug on the esc?
hobbywing has the best set up for programing their escs with blutooth the ui is clear and easy and on my phone no extra gear needed
LOL
Humm that sounds awesome , does the hobbywing max 6 do that
Paul Cherry yes! Both 5&6!
@@JonJonsOutdoors that's baddass there escs have bluetooth
Only one I know of that has built in Bluetooth is the AXE for crawlers and thats amazing!! Have I missed something? Has Hobbywing updated the others? I need to check!
Hobby wing has the 56112 and 5684 what actual size is this 2028 can? Is it the 56113?
yeah the 800kv 2028 is the 56113
I'm thinking about putting that set up in my dbxle, would it be much of a difference in performance and speed, or is it not much of a gain compared to stock?
I hear if it true that xlx2 esc don’t like jump it cause esc cut power?
Castle XLX is fine with jumps, I have no idea why anyone would tell you that.
Guess ppl don’t want me get that lol was think of get that with either 1100 kv or 800kv
I'm currently having an issue with my xlx2, and I know you're pretty familiar with the xlx2 from using it so much. To put it as short as possible, when my vehicle is at a standstill and I give it throttle to accelerate, it accelerates normally, but as soon as I let off, let it roll for a few seconds then get back on the throttle, it'll brake. It will roll completely freely, until I apply throttle again... I have no drag brake enabled by the way. I apologize for the long comment on an old video, but I just wanted to see if you had any insight on this issue.
Sounds like the mesh is too tight make sure your motor mount is mounted evenly. I had this same issue recently
Awesome brother... I just got the same setup... not sure what im going to put it in first. Love ur channel and would love ur feedback on mine. FX RC Thanks and keep up the Amazing videos brother!!!
I currently running old xlx 8s in my Losi Dbxl-e stock motor it came with it will not pop wheelie will the new. Xlx2 1100 kv combo get the front wheels up?!
Can I put this in a Traxxas 8s XMax? What do I need for a proper installation?
after seing what happened with these esc recently. im gonna leave it alone...
Do u have to update it
The newest ones selling now are already updated.
Will it fit on a stock typhon
No
What if you don't have a laptop to get castle link
prices and links for this setup
In the description
How would it do in a 1/5 scale crawler? Asking for a friend lmao
LoL if I had one!!!
@@ExocagedRC is there one worth having? I only know of 2
I need that lol
Did this work with the traxxas reciever and controller?
I did a video with the stock radio, you have to keep the temp probe and all hooked up so it works.
Damn man I’d really like to have one of these set ups but man that’s a lot of scratch.
Not cheap, I really want this in 12s.
How can I talk to you?
I need help buddy.