Lmao yeah, spend the extra 20 bucks and get the whole wheel done and ready to go lol. I knew right away i wasn't going to like this process. I dont have the proper tools. If you dont have the right tools for a job, hehe, good luck lol
put zip ties/cargo straps from the pound shop or strong string around the rubber tyre at 3-4 points if that is tubeless in the video you will have a slow puncture with the deformed rims after doing this all the time especialy without cloth . if still struggling preheat in the oven , dont melt!
Very smart and alot easier . This should be highlighted as priceless info. I was thinking bout trying something for both methods as I was struggling with brut force , my hand being injured from the accident that caused the flat and with 2 pieces of thin hard plastic , mind you it's the wheel with the motor so I cant take off and play with it. Unbelievable nightmare. Didn't stay trying to long tho , I new better just felt I could somehow muscle it out , or somehow God would help me get it , then I realized I'm in to much pain I'll just use my brain and end up finding a decent solution even with those crowbar's he looked like he was struggling and like you said freaked the rim and tire too . Great idea especially the zip tie, I haven't tried it yet but it seems to be that it can work , if not I bet heating it will. Gold man Gold
1 handed clamp set - easier than tags Tire levers Heat the tire for 3 mins in hot water 80°c Apply lubricant oil with hands on the rim's outer edge and the inner surface Apply oil with hands on the outer edge and inner edge of tire which has contact during mounting. Without lubricant there is chance of tire bead getting damaged. After the first tire bead goes in, with hand push the second bead as far as possible and use the clamps to press the tire on the sides to hold the tire inside the rim. Then use the tire lever to complete it. It is as easy as 10 mins job !
I'm saying right , that's how they be getting the average joe , you got to be a beast to get this joint on . Even tho he south america macgyvered that shit . This the NYC migrant edition, he scraped the hell out that rim
Scratches not the worst on rim. But it`s being bent and out of balance is another thing.. I changed tire several times on my elscooter with 10 wide tires, not the rim looks like a scratched up mess. Still in balance tho.
the tire shop struggle too i took it in to a few they bent my rims and had a slow puncture as im tubeless. pre heat in oven dont melt. small cargo/luggage straps with rachets on from the pound shop on the rubber tire at 3-4 points to stretch inner rim before trying tom put on and lube. i dont even need to use levers now
Heres me trying to do it with two spoons
your problem was there is no spoon.
@@herculesbrofister265AWESOME Comment!
"Free your mind, Neo" 😂
@@herculesbrofister265 lolz thanks i will try eith spoons
I'm thinking the same thing while I'm repairing the tire 🫡😤
I spent 4 hours last Sunday, and did not even got closed (10x3" tire). Respect!
This tire is easy that's why.... you pribbaly have a wide tyre
Same here... and, I have a wide tyre 😢
Ok I’m glad it’s not just me. I been fighting for my life trying to get this stupid tire on wit my little plastic wedges 😂
Put it on hot water 1st to make the wheel soft
Get what he got you need thick pry bars
Lmao yeah, spend the extra 20 bucks and get the whole wheel done and ready to go lol. I knew right away i wasn't going to like this process. I dont have the proper tools. If you dont have the right tools for a job, hehe, good luck lol
Yeah unless your wheel has the motor built inside of it then it’ll be $100 dollars to to fix a simple flat tire and a unnecessary motor swap
Thanks so much man! This helped so much and me and my girl were able to fix my scooter!
I need those swords
put zip ties/cargo straps from the pound shop or strong string around the rubber tyre at 3-4 points if that is tubeless in the video you will have a slow puncture with the deformed rims after doing this all the time especialy without cloth .
if still struggling preheat in the oven , dont melt!
Very smart and alot easier . This should be highlighted as priceless info. I was thinking bout trying something for both methods as I was struggling with brut force , my hand being injured from the accident that caused the flat and with 2 pieces of thin hard plastic , mind you it's the wheel with the motor so I cant take off and play with it. Unbelievable nightmare. Didn't stay trying to long tho , I new better just felt I could somehow muscle it out , or somehow God would help me get it , then I realized I'm in to much pain I'll just use my brain and end up finding a decent solution even with those crowbar's he looked like he was struggling and like you said freaked the rim and tire too . Great idea especially the zip tie, I haven't tried it yet but it seems to be that it can work , if not I bet heating it will. Gold man Gold
Id like to see will it pop on rim and inflate. 😁
slow puncture at best
Yep I gave up after 45mins, and sent that ahit back to Amazon 😅
How do I not destroy the tube while doing that?
this video is about (tubeless) tires
I spent 3 hours to change my tires and I don’t even make it😂😂😂 that sh*t is to hard
surprised the rim didn't get bent from prying the tire
cela a l’air facile comme ça mais en réalité c’est pas évident surtout si ont a pas les bon outils 😮🇫🇷👏
1 handed clamp set - easier than tags
Tire levers
Heat the tire for 3 mins in hot water 80°c
Apply lubricant oil with hands on the rim's outer edge and the inner surface
Apply oil with hands on the outer edge and inner edge of tire which has contact during mounting. Without lubricant there is chance of tire bead getting damaged.
After the first tire bead goes in, with hand push the second bead as far as possible and use the clamps to press the tire on the sides to hold the tire inside the rim. Then use the tire lever to complete it.
It is as easy as 10 mins job !
Does K Y lube work?
How do u get the original tire removed? Dremel?
Yeah I have to have scooters with split rims. Reasons why I sold my Emove Cruiser.
Yeah, just finally got a solid tire on my emove cruiser. Never want to replace a tire on a scooter without split rims again
That’ll be 800 dollars
I'm saying right , that's how they be getting the average joe , you got to be a beast to get this joint on . Even tho he south america macgyvered that shit . This the NYC migrant edition, he scraped the hell out that rim
Why haven't you shown changing the rigid tire to the wheel with the engine?
Por qué no has mostrado cambiar neumático rígido en rueda con el motor
Okay, hao la😂👌👍
lol try doing this with phase wires still attached and the wheel standing upright with no way of setting it down
thats what i had to do on my 7260r. legit pain in the ass.
not all tires r this easy... I just replaced my solar p1 tyre fucking hell... I was sweating
Se schiacci il copertone le metti le fascette e lo metti in un secondo 👍👍👍👍👍
How do increase the speed limit on my Hitway Bk8m??
I’m trying to do the same thing it is not working. Can you help me out?
😂god kids today have no chance of learning I learn so much just fixing my bike lol
They don't need to be balanced?
Hi, do you know where I can buy spare tire for this e scooter? I have a flat and I’m pissed that I can’t ride.
on amazon check megamotion e scooter
Scratches not the worst on rim. But it`s being bent and out of balance is another thing..
I changed tire several times on my elscooter with 10 wide tires, not the rim looks like a scratched up mess.
Still in balance tho.
That rim i have on my inmotion l9 and it s 10"
So........ pump the tyre up then ?
Wow fk me. 😂
This was installation, not removal.
Oh boy i didnt realized how big of a trouble i have at hand right now😂
Please can you help me I need to find brake pads for my way scooter
Several additional instructional videos can be found on YT. Search Julie Voelz.
EVERCROSS Break Lining Replacement for H5 Electric Scooter a.co/d/77Lc8cJ
What kind of pieces of iron are called swords?
Tire irons from harbor freight
I don't have the tools for this. I'm just going to take this up to my local tire shop to remove the tire
the tire shop struggle too i took it in to a few
they bent my rims and had a slow puncture as im tubeless.
pre heat in oven dont melt. small cargo/luggage straps with rachets on from the pound shop on the rubber tire at 3-4 points to stretch inner rim before trying tom put on and lube.
i dont even need to use levers now
I find its easier to move house and leave the tyre there
lol😂
Hahahhaah
What is the size of the tyre please for hitway h5
8,5zoll
Please help me
I can't get my tyre to seat
Someone used a compressor I've used CO2 used a strap😢
$25,- complete with wheel, safes you from this bullshit
Varză
too much pain
Metal on metal ? No thanks!
Have ever you tried it with plastic ones :D Cuz you seem like not :)
Haha
Where can I get full pdf for hitway hb24? Please help
I can't find brake pads for my hitwe scooter please help me
Hitway/Evercross H5/HB24 parts can be found on Newegg.com.
Send an email to the seller on Newegg asking for the manual.
Several additional instructional videos can be found on YT. Search Julie Voelz.
www.google.com/amp/s/manuals.plus/hitway/h5-electric-scooter-manual/amp heres a place with the manual
@@naheed2174 EVERCROSS Break Lining Replacement for H5 Electric Scooter a.co/d/77Lc8cJ brake pads
Anyone who didn’t already know how to do this must be missing some grey matter.
I did it without any tool jast hand
I wanna see whats left of those hands 😂
@@goofyahhh254you need to put the tyre in boiling water and use little bit of oil and hands of disappointment
Nice rim when u are done