When i saw you put in the hook hangers I couldn't get over it for a minute, I was like maybe he just knows something I don't. Bust out laughing when you noticed though haha
@@geelangadipr223 ehh these things happen, I make lures too and I have thought about this concept for awhile, so I’m glad to see someone trying it out, not every idea is a winner. You’re right though since he has the hardware there if he liked the action he could just throw some trebles on there👍
Dang, glad to see you won't give up on this one. I made a lure before just like this except it had a lever that stuck out the top which was attached to the hook that when a fish had the bait in its mouth and you pull, the lever pressed against the top of the fish's mouth levering out a hook from the bottom that was spring loaded into the bait. It was also a lipless crankbait just like a rat-L-trap. I fished with it once and at one point, 2 or 3 bass were going after it at the same time. But I could not hook them on it and gave up on the idea. I really believe if someone can perfect the weedless concept it can be a very effective idea since it can get down into all the brush. That was a really smart way to deploy the hook you tried there. Maybe could combine a mechanical partition with a soft plastic partition or something? Looking forward to seeing what you do next and good luck.
as always mate, nice video ... If I can suggest you something, with your skills and tools I would try a hybrid lure ... a wooden body (with weight and hook support) and a softbait tail where to hide the hook and make it weedless ... cheers man ...
Your wood carved/panted baits are my favorites. I think they really display your craftsmanship. Can I make a bait request? do the fossil fish Coelacanth. “Make it official.”
I had a similar idea for a lipless crank! Glad to see I'm not the only person in pursuit of a snagless lipless crank haha. I haven't built anything lately though, but perhaps you could give my approach a try. Basically a line thru lipless. Tie up the line thru hook like a punch jig so it pops straight out on the hook set. Magnets holding it inside.
That's what I was thinking too. Hook needs to come out on hook set and somehow be attached to the line but somehow be able to be reset without human interaction in case of miss.
All ways amazed when you pull that mesh off after and not scratching the paint with it being so tight. over paint or clear coat something comes off. nice job.
Would love to see you make a Nessie style bait! Like a jointed soft plastic but with some cloth in the joint to help with the action and making it thinner! Killer idea!
Amazing, I NEED one of these lures now! Truly a professional getting all the unorthodox mechanical stuff done in about an hour. 15:08 yes, we know what it was like. We've all been there.
I was just fishing with my buddy the other day using a lipless crank. I kept telling him how much I hated the lipless crank because of how the line gets stuck in the trebles and it’s always getting snagged. Of course you come out with this banger the next day, I’ve got to make one of these.😮
Glad you're not giving up on this one Nate! It just has to work. The whole time I was watching this I was thinking a little feather teaser trailer on the back empty hook hanger was needed, but by the end of it I thought you might put a treble hook there, I know that it wouldn't be snag proof anymore but it would have been ofishle.....FishOn...jimi
Big thumbs for this! Invention and innovation is needed, especially as you have a lot of experience about lure making so I would suggest you to do it all the time, as you do.
I think I have seen all your videos and this paint job is in my opinion one of the best. It looks amazing. You do great work. Thanks for the great videos.
Every video i hear you swy something that just makes my day go to drop a like and realize ive alreays done that... Bring the multi like ability into reality
Please make another bait like this, smaller profile / refined hook. I feel this would be such a sick bait to prove out! Nice paint scheme, looks gorgeous!
I've never wanted one to succeed more than this one. This one pulled on all the heart strings. I think you're right, the profile needs to be slimmer. The curve of the hook probably needs to be "half" of the whole profile, and the spine alllmost flat. But those would change that incredible action you got on this one.
Man, great idea! Pretty bait too. That was amazing how it work so well wiggle wise & weight wise. Your entertaining and funny. Glad you got it back after being all jacked up in those limbs. Going to black & white is suspenseful. Fun video. Thank you!
Such a cool bait. The clown kihli fish would also make a fun paints scheme. Also I've asked before but a bosmani rainbowfish or peacock gudgen would make killer paint jobs
Glad to hear Days of the New is back on deck. Maybe you could reach out to them for a collab . I think you’re on that level now. Finally found a reason, you don’t need an excuse.
Cool concept. Looks like one that will work, but will require a lot of fine tunning to do so. Maybe the problem there is that the fish bite is more like a cone than a cylinder? Then the hook point only gets out when the 'lip" of the fish presses the bait, so only when it is pretty much out of its mouth. I think you could make a sketch of the profile of a bass mouth and think how it opens and closes to get the bait to work. There are some cool slow motions on youtube that could help with that. Good look!
If you wanted to revise it, you could make a hollow body softbait/tpu tail end or middle section with the magnetic hook. Might get better hookups while also being better than a typical hollow softbait
Quote of the month... "That's the kind of clapping I like to hear..." It's a good design overall, I have no doubt with a little refinement it will work great. I will say though, if you had the tail treble hook on as a back-up, you would have gotten several of those fish I think, but I understand the true test was the design of the hidden hook. Good Stuff. Tight Lines Nate!
I've used a soft swim bait before with a magnetic hook receiver. I think what you really need is for the beast hook to be on a fulcrum and your line tied to the hook eye. That way you kind of force the hook up out of the slot when you set the hook
This was the third time I went to like this video I forgot about the first time when I liked it, and the second time I thought to like it but was already liked. ONE DAY!
That's the kind of clapping I like to hear lmao 😂🤣
lol, I chuckled 😂
He got me with that one to lol😂
It made me giggle
I’m glad we’re all on the same page😂😂
Giggity
can we take a moment to appreciate how genius and skilled Nate is
He is, but this lure is made buy anglers a long time ago allready. Just look.
@@teamrustikalandid8683 not just off this design im talking about just in general he is in general a genius and he's extremely skilled
The paint names always amuse me. Maybe it's time for a 40k Warhammer/ baitmaking crossover. An Ultramarine-themed bait would look pretty sweet
Booo. Screw the Emperor. Eldar or death.
I craved the certainty of steel
A D-Cannon would soon fix that....
@@Mardy72 For the greater good!
This would be awesome
Nothing better than falling asleep to marlin baits and waking up to him in the same video
Agreed
The soothing voice that you put people to bed. Literally watching this before I go to sleep. Nailed it
When i saw you put in the hook hangers I couldn't get over it for a minute, I was like maybe he just knows something I don't. Bust out laughing when you noticed though haha
Actually if he put hook there he might actually catch a bass. Snag proof on the fish mouth.
@@geelangadipr223 ehh these things happen, I make lures too and I have thought about this concept for awhile, so I’m glad to see someone trying it out, not every idea is a winner. You’re right though since he has the hardware there if he liked the action he could just throw some trebles on there👍
@@Kyykarme this bait were perfect. I never though of putting weight on the front.
I think that's one of my favorite paint jobs, and I love the hook system!
Gotta love when a day just gets 10x better when the phone lights up
24:00 pulled on my heart strings when he mentioned chips strawberry lure.. we miss you chippy🍓
2 marling bait videos in a week 😮🤤
Dang, glad to see you won't give up on this one. I made a lure before just like this except it had a lever that stuck out the top which was attached to the hook that when a fish had the bait in its mouth and you pull, the lever pressed against the top of the fish's mouth levering out a hook from the bottom that was spring loaded into the bait. It was also a lipless crankbait just like a rat-L-trap. I fished with it once and at one point, 2 or 3 bass were going after it at the same time. But I could not hook them on it and gave up on the idea. I really believe if someone can perfect the weedless concept it can be a very effective idea since it can get down into all the brush. That was a really smart way to deploy the hook you tried there. Maybe could combine a mechanical partition with a soft plastic partition or something? Looking forward to seeing what you do next and good luck.
30:59 ❤ Awe, so very sweet of you Sarah.
Right as I sit down for dinner, thanks Nate
I love that you love Benjamin Todd. He's my favorite artist
I'm glad others notice it. Lost dog is amazing. Saw em a couple years ago in Kentucky. Met all of em. Cool dudes
Very nice craftsmanship! Keep up the great work!
Nice lure. Made it 4 years ago and works fine! If you need 1 i can send you! On to the next bait.
Has to be my favorite paint job... and good job Sarah on the chip carving. That looked awesome too
as always mate, nice video ... If I can suggest you something, with your skills and tools I would try a hybrid lure ... a wooden body (with weight and hook support) and a softbait tail where to hide the hook and make it weedless ... cheers man ...
A perfect break during finals week, thank you!!!
Lol same here
Your wood carved/panted baits are my favorites. I think they really display your craftsmanship.
Can I make a bait request? do the fossil fish Coelacanth. “Make it official.”
I had a similar idea for a lipless crank! Glad to see I'm not the only person in pursuit of a snagless lipless crank haha. I haven't built anything lately though, but perhaps you could give my approach a try. Basically a line thru lipless. Tie up the line thru hook like a punch jig so it pops straight out on the hook set. Magnets holding it inside.
That's what I was thinking too. Hook needs to come out on hook set and somehow be attached to the line but somehow be able to be reset without human interaction in case of miss.
All ways amazed when you pull that mesh off after and not scratching the paint with it being so tight. over paint or clear coat something comes off. nice job.
Thank you for showing us, even when its not offishal in the end 😊
I always enjoy your experimental baits. They are my favorite videos.
This is one of the best lures I've ever seen on your channel. 10/10 mate!
I loved the concept and I sure thought it was easily be o-fish-all. Keeps with refining it. It was a beautiful paint scheme
Whhhhuuuuun day! That's the kind of clapping I like to hear bro
Would love to see you make a Nessie style bait! Like a jointed soft plastic but with some cloth in the joint to help with the action and making it thinner! Killer idea!
Amazing, I NEED one of these lures now! Truly a professional getting all the unorthodox mechanical stuff done in about an hour.
15:08 yes, we know what it was like. We've all been there.
Absolutely love the hidden hook design hell of a idea there great content as always
This is the most wild contraption I've seen you build. 👌
I was just fishing with my buddy the other day using a lipless crank. I kept telling him how much I hated the lipless crank because of how the line gets stuck in the trebles and it’s always getting snagged. Of course you come out with this banger the next day, I’ve got to make one of these.😮
Glad you're not giving up on this one Nate! It just has to work. The whole time I was watching this I was thinking a little feather teaser trailer on the back empty hook hanger was needed, but by the end of it I thought you might put a treble hook there, I know that it wouldn't be snag proof anymore but it would have been ofishle.....FishOn...jimi
Love the idea behind this bait! Definitely needs a revisit with a few little tweeks
ive wanted all your baits but this one takes the cake for me
its a proto type of the ultimate lure you are about to make my friend! thank you nate! always fun and a blessing to watch.
Love watching your videos keep making them
(From Indiana)
I constanly forget to test mine before I paint. It usually doesn't work out near as well as that one did. Excellent addition to the course.
Within the miniature painting field, it's really popular for people to buy vortex mixers. They work really well for tiny bottles.
I just knew it was going to work. It was a great build on it anyway.
Big thumbs for this! Invention and innovation is needed, especially as you have a lot of experience about lure making so I would suggest you to do it all the time, as you do.
This is an awesome design!
That was sickkk!!! I can't wait for round 2! Seriously, that's a killer design.
I think I have seen all your videos and this paint job is in my opinion one of the best. It looks amazing. You do great work. Thanks for the great videos.
thank you for uploading when i got off work, Love the content, thank you for everything! Thank you Nate for changing the bait making community
thats a really cool design
i have no idea how you just come up with things like this
I really love the idea of this bait. I bet it would be fantastic in a spook style bait. A slender body, and snagless. That would be a winner!
Every video i hear you swy something that just makes my day go to drop a like and realize ive alreays done that... Bring the multi like ability into reality
I watch your videos every night even if they are old ones. Very glad to have a new one tonight. 🎉
Hope you stayed safe last weekend. Great concept maybe try making the hook out the side.
I love watching your vids, you inspired me to make my own fishing lure. rip chip❤❤
Very pleasing paint scheme. ❤
that pike spot was super sweet, I'd surely fish the hell out of it
I think this is my favorite bait so far!
Please make another bait like this, smaller profile / refined hook. I feel this would be such a sick bait to prove out! Nice paint scheme, looks gorgeous!
Very nice craftsmanship thank you for the video on to the next bait
I love the paint scheme. I think it was a great idea about the hook maybe a a size bigger on the hook might work.
I've never wanted one to succeed more than this one. This one pulled on all the heart strings. I think you're right, the profile needs to be slimmer. The curve of the hook probably needs to be "half" of the whole profile, and the spine alllmost flat. But those would change that incredible action you got on this one.
I love the compilation of random snippets of the video at the end!😂
im hoping you make a second prototype, i wanna see this thing work man. best of luck.
You gotta try that again. Such a dope idea.
Vincent Neil Emerson playing in the background just made my whole week
Awesome idea Nate
Man, great idea! Pretty bait too. That was amazing how it work so well wiggle wise & weight wise. Your entertaining and funny. Glad you got it back after being all jacked up in those limbs. Going to black & white is suspenseful. Fun video. Thank you!
This is absolutely brilliant, I feel like companies will be making their own versions.😮❤. Just needs a little fine tunning.
Loving the lost dog nod ❤
I was thinking the other day about a automatic hook spring loaded maybe you could make it come to life! Great vid!
This is sooo sick!! Awesome stuff Nate!
Such a cool bait. The clown kihli fish would also make a fun paints scheme. Also I've asked before but a bosmani rainbowfish or peacock gudgen would make killer paint jobs
Killer paint job, hell this whole build was 🔥🔥
My wife and I love the relaxing tone of your voice.
Don’t give up! It’s a great concept!
This made me think of squid fishing lures i've used and some sort of quad/multi-hiddenhook monstrosity as a future idea
Love the color change with the snags
That’s an excellent weedless crank design. Great build dude
Glad to hear Days of the New is back on deck. Maybe you could reach out to them for a collab . I think you’re on that level now. Finally found a reason, you don’t need an excuse.
Cool concept. Looks like one that will work, but will require a lot of fine tunning to do so. Maybe the problem there is that the fish bite is more like a cone than a cylinder? Then the hook point only gets out when the 'lip" of the fish presses the bait, so only when it is pretty much out of its mouth. I think you could make a sketch of the profile of a bass mouth and think how it opens and closes to get the bait to work. There are some cool slow motions on youtube that could help with that. Good look!
Love the funny clips at the end of the videos.👍
Suns out, guns out. You have been bulking up. Biceps 💪 veins are popping. Nice job. And like always, great bait!!!
That was a cool bait design!
The cup collection quip is so true!
“We do not want to get into any of that slottage believe it or not” 😂
That's how you know you're good. Nice build
Hearing colter wall in the shop makes me like you even more
If you wanted to revise it, you could make a hollow body softbait/tpu tail end or middle section with the magnetic hook. Might get better hookups while also being better than a typical hollow softbait
Love your content Nate!!! Keep up the amazing work
For the extra hardware spots you could put skirts or blades to still have function with form
Love the paint color and would absolutely love to buy one of these if more are to be made
Quote of the month... "That's the kind of clapping I like to hear..." It's a good design overall, I have no doubt with a little refinement it will work great. I will say though, if you had the tail treble hook on as a back-up, you would have gotten several of those fish I think, but I understand the true test was the design of the hidden hook. Good Stuff. Tight Lines Nate!
"dont let the PIKE BITE!" got me rollin'. Great video Nate👍
I literally fell asleep to this video a couple hours ago, I had to wake up and rewind 😂😂
I've used a soft swim bait before with a magnetic hook receiver. I think what you really need is for the beast hook to be on a fulcrum and your line tied to the hook eye. That way you kind of force the hook up out of the slot when you set the hook
Love the idea. Was really hoping it would execute with the bite.
Why is Nate actually like me with the random cups in the shop or in my room? Sign of a genius I guess; this bait idea is plenty proof of that! 😂😂😂
Love ya Man! Bless you and your Family. Fur babies last forever!!❤
The cups in your shop made me go clean the ones out of my car
You should get one of those bait savers. You snag a lot and I’ve had some luck with the weighted thumping kind.
A good marling vidjah to turn my day around❤
I also questioned the hook hangers but I never had a doubt that it would work correctly and "wiggle"
This was the third time I went to like this video I forgot about the first time when I liked it, and the second time I thought to like it but was already liked. ONE DAY!