@@sptrader6316 Yep, there are several work-arounds. If using a PWM Spektrum receiver you could just pull the pins out of the 4-wire plug used here and re-order them so that they deliver A,E,T,R from the receiver's T,A,E,R - OR, as you say, you could re-order them in the transmitter settings (if allowed by the transmitter you are using) which you would HAVE to do if trying to use a single connector serial connection if you have a Spektrum-capable receiver that can put out PPM or S-bus. It should also be noted that the newer version of this (the Sparrow 3 Pro with the pre-soldered pins and dual switchable camera ports) has dispensed with the PWM input option. It only allows PPM, S-bus, i-Bus and ELRS/CRSF receiver serial inputs.
That's good for everything BUT for Spektrum Burkie! You need A, E, T, R channel order for the Sparrow by default, NOT Spektrum's stock T, A, E, R! 😉
You can change the servo order in the transmitter settings. (AETR, TAER etc).
@@sptrader6316 Yep, there are several work-arounds. If using a PWM Spektrum receiver you could just pull the pins out of the 4-wire plug used here and re-order them so that they deliver A,E,T,R from the receiver's T,A,E,R - OR, as you say, you could re-order them in the transmitter settings (if allowed by the transmitter you are using) which you would HAVE to do if trying to use a single connector serial connection if you have a Spektrum-capable receiver that can put out PPM or S-bus.
It should also be noted that the newer version of this (the Sparrow 3 Pro with the pre-soldered pins and dual switchable camera ports) has dispensed with the PWM input option. It only allows PPM, S-bus, i-Bus and ELRS/CRSF receiver serial inputs.