How to Make a Battlebot - Drum Spinner
HTML-код
- Опубликовано: 11 сен 2024
- Learn how to build a remote controlled Drum Spinner Battlebot at home.
Material Required :
1. 12 mm Plywood
2. 12 Volt Bike Battery
3. Four 12 Volt 60 rpm DC Gear motors
4. Two 12 Volt 1000 rpm DC Gear Motors
5. RF 2.4 GHz 3 Channel Remote Controller
6. Four Bicycle training wheels
That drum would last about 5 seconds in an actual match. Please, anyone watching this video, don't make your drum spinner out of plywood and wood screws. My whole beetleweight bot probably weighs less than that drum and I can very confidently say if I were to take it on it would get destroyed in the first contact between us.
Why hasn't anyone said this? It's pretty clear battle bots are made to fight, not for show. Screws easily crack plywood just by screwing them, imagine if they were spinning hundreds of rpm.
Bro everyone knows and no One would make One of this and FIGHT with it
This is just a model you can make if you are new in creating robots
Pls stop making obvious comments thanks
@@luk.23 Bro! If you took two seconds to read other responses to this video (including one response to my comment above) you'd realize how completely wrong you are. No experienced combat robot builder would take this into a fight, but, and this bit may shock you, the majority of RUclipsrs are NOT combat robot builders.
Please stop making stupid comments which are factually incorrect, thanks.
Sir @DrachenJager1 as u might not understood i am pretty sure ur comment was an "Alert" to people to NOT bring a robot like that into a fight because of its malfunction and i think you took that a bit seriously like if someone would really took a robot like that one to a fight so i did my comment saying nobody would take a robot like that to a real fight and it was just a model of a Basic battle-bot and u came in doing an comment talking about (no offense) non-sence
Talking about how the majority of youtubers didnt participate in battles
And u just quite litteraly SAID WHAT I SAID but using it has an argument and im here thinking how your comment could make any sence one of its options to make sence was using sarcasm in the first comment you did, next u even brought up minus comment that was (like yours) asking how nobody did a comment like yours allerting to not bring one robot like that into a fight for its malfunction " i didnt quite understood what you meant if it was sarcasm what your where talking about or u just CTR+C and CTR+V my comment and used it aginst me as if i was the One saying people would actually bring a robot like the One from the video when im pretty sure ur comment was the one which i intended was an comment talking about how people should NOT bring a robot like that to a fight
Pls chill and if u answer this comment pls say something that isnt saying quite litteraly wath i said intending that i was the One who made ur comment, thanks have a great day Mr DrachenJager1
We know, we are not dumb!
a good ass name for this bot could be "home wrecker"
This was great! Totally loved it.
Only one thing: you should make a proper toturial for how to make these things. There were a lot of things that weren't clear in this short video.
Maybe a playlist? Please...
Bring this to a competition. This looks like maybe a featherweight? Bring it to AVC in 2018.
Robert Cowan I'm sure it will not survive the competition. It's good one but the real ones are made with metal also they are very fast. This one is easy to make for Normal people compared to those but it's nothing in front of real ones
Well, that was kinda my point. It's not REALLY a battlebot, it's just a craft project.
lol right. I think 1lb antweights would destroy this. I mean if you can test it in your kitchen its probably not a good sign.
It will be torn to pieces before a blink of an eye.
I think the point of this is simply to demonstrate how a simple one can be built, it would be very easy to make a competition worthy bot by following the same instructions but building it out of heavier materials.
Hey can I know where did you buy the controller please and the link
Description
Wooden robot
Mystrsyko:*heavy brathing*
*breathing
breathing*
You glue it. How cange the Batterie?
A perfect Lunch for Minotaur
bite force killer right here
What receiver did you use and where can I buy one? Would it work with a Xbox 360 controller ?
same, I'd love to use an xbox 360 controller to control a bot. Though, would prefer analog sticks to do the motion.
Osam
I think Yeti might be just a little more powerful
same
Yeah just little
Nahhh
Wowww!!!,,😮😮😮😮 What a robot
where did you find the receiver that can plug into the motor board?
What remote u used for controlling robot?
How much money will require to make this robo
Dude, what board did you use?
The problem is maybe if you bring it to the battle,they might remove the weapon motors
Omar and Abdulrahman Fun and learning TV why would they?
Chris P. When they fight the opposite team robot might use there weapon and try to break the motor so he need to cover it
Omar and Abdulrahman Fun and learning TV : That's not how robot fighting works. It's full on carnage.
Caleb Sherman I know so they will try to make them lose so at first they need to make sure that they will not lose so they will attack the prominent motors . His robot will not be able to damage the enemy's robot
@@hajjex_9086 yep its a very easy design to disable and the issue is aswell that he completely sealed the unit with glue instead of screws so he will have to try and pry it open to repair which could completely destroy the housing, the idea is there but the implementation is not
Thanks! Worked great
all 301,000 people: HMMMMMM INTERESTING
Minotaur: hello brother!
You should put more spikes on the drum spinner
Where did you buy that part where the all the wires connect to?
Maqueta más controlador H y los motores junto con el controlador wifi. Muy fácil 👍👍
where'd you get the circuit board
I was thinking of making my own drum spinner but in the antweight category. My brother and I love the idea of bots fighting it out! I wish i would be able yo compete in tournaments but the traveling isnt really possible right now. Ill build it anyways and improve on it with fights with my brother so that if i get the chance to fight my robot is battle hardened
Where to buy that circuit board he used?
which board is that?
Amazing!
I've seen alot of battle bots in my day... Even the ones my students build out of Lego would destroy that one... Wooden bots are dangerous.
1: they can catch on fire easily
2: they will shatter and shoot splinters everywhere
3: making the drum spinner(which works by imparting the rotational inertia at top speed) would shatter and send flying screws at you
4: that thing is really slow... A wedge bot could easily get under that and it's game over
5: you can't recharge the robot so after about 30 minutes of fun it's now a shelf keepsake
6: why didn't you map the joysticks to the receiver? You have no control over the speed
So many things wrong here...
Christian Siefen the mistakes here are obvious, but hey, at least this can move, the guy of the video now has the basics of make a combat robot, that means that he can make a better robot next time. Well, that's what i think :v
Hi my name is anay and can you please help me
-> I am in 9th class and I am trying to make a war robot for interschool compidition
-> please can you help me with the weapon, I am stuck
-> I would really appreciate if you would reply.
Phone no. 8810691302
at least its better than bite force
edit: what have i started?
You are GREAT bro
I wonder how many pieces this would be turned into if it fought Minotaur...
Adam Cheung not how many pieces but how long it would take to clean the dust from the arena
a pile of burning saw dust lol
How many pieces would be left :)
About 172538 pieces.
Try brushless motors for the weapon and it might do more damage
That weapon cannot handle the strain. This isn't a proper combat robot, just a backyard fun bot. In a real event the weapon would fall off in the first hit. Check the NHRL RUclips page ruclips.net/channel/UChgAZxOWR0S3Q376oAodGjQ for lots of robotic carnage.
This might do good in the junk featherweight category. It will disintegrate in 3 minutes. Nice try though.
if u can better out the engine this looks like a decent competitor in the low tiers
This is like the robot tetanus but shity as the robot napalm
Btw,great video
man I've the same! but it's like a "hand made Lego" thing
Won't the drum motors get broken quickly?
Awesome Sir, may i know what type programming do you used for this battle bot?
I'm pretty sure the receiver and transmitter are pre programmed
Dude give link of those transmitter and that board
Hi, you didn't show how to make sure the motors turned in the correct directions.
The motors on the left side will have to turn in the opposite direction to the motors on the right side to make sure you travel in the one direction.
Also the two motors on the spinner.
You have not shown any connection details for the receiver to the motor controller.
Also you need a fuse on the battery to protect against short circuits if you really are going to Battlebot.
Actually, a fuse is completely unnecessary unless you compete in the UK, and can be a major weak point since a good hit could break the fuse.
@Need2connect
You only get battery fires if you use a low quality battery that can't take the current draw, or if the battery is punctured. The former issue can be solved by using a better battery (it's not even that expensive to do so, Turnigy Graphene Panthers are pretty cheap and will outperform many of the more expensive brands), and a fuse won't do anything for the latter.
But what do I know? I'm just a 3-time beetleweight champion at Small Bots of Mass Destruction, winner of the first-ever Florida Polytechnic Fire Fights Beetleweight class and a regular semi-finalist in the 12lb tabletop class at DragonCon Robot Battles.
At the events I've been to I've only ever seen one battery fire due to overdraw, on a cheap white-label 5c 300mAh 3S being run in a Viper kit with a horizontal spinner.
como se llama esa tarjeta controladora de motores?
Looks like Minotaur from battle bots
What was that thing that you have connected to the motors??
Nice indian👏
Angry little machine! Like!
I want to purchase the 2.4ghz controller can anyone send me the link to purchase it
Hello Dear, You can buy online from robokit
which module has he used for connecting and coding all the motors??pls. tell
2.4 Ghz Wireless Module
This is amazing! You guys deserve more subscribers. Keep up the awesome content!
Can you share the link from where you bought this transimetter and receiver please.
Did u ever build it?
@@ronnsoon9994 yesss broo
@@ayushasawa9035 you still have if so can you post it or something?
All items kha milega ?
This is the first stage in building a battle bots but in metal form this is protected type to the real thing
What type of wire did you use
superb video
Please put a link to receiver and transmitter
Which spray did u use?
What is the motor shied used there
Means?
How do u get those remote,chip,and the battery
also what motor board did you use
I'd probably rearrange the teeth on that drum but pretty decent
Such a big bot for very little components
What controllers did you use for the engines?
The one that came with the receiver
Can we make this car out of iron...
Hey Bro what kind of dc motor do you use
12 volt DC 100 rpm Gear Motor
I think, it will be damaged after just 1 attak of weapon of others Bots 😅😅
Yes
Traveller Hasib imagine this against a fire type bot
@@ifunnydotcomwatermark2616 I am thinking about tombstone & minotaur against this bot 😅😅
I cannot find where people get the parts to create a decent drivetrain. Not quite building a battlebot but a remote vehicle that can carry surveillance equipment and run for a few hours (mostly stationary with a video camera).
I've ripped apart a couple of 18V drills for their clutch + motor. Depends how much force and speed you need/want
What is the dimensions at 1:04
You should’ve bent the screws so It would scoop more
Nice job yo!
3 pilhas que vem dentro da bateria de notebook da 12v
De cuánto Amperaje es la batería??
You need links bro I can’t find anything
After long time
Is arduino ka name btao konsi h smj nhi aa rha
What are the tactical applications of this?
Check literally any combat robot with a drum spinner. Minotaur, Yeti, Hyper Shock, etc. Basically to chew the other bot up. Drums have insane damage output. In most cases, so much that there's a constant chance of self-damage on contact.
10:27
Nicee !!
Can you make video about making horizanol or veratical spinning blaze bot??
Cool
Wat about tombstone
How did you make the control
Check the description at number 5
How do u turn vehicle without servo??
Sheshraj pandit each wheel is independant. So its like tank. Put one stick forrward amd you one side of the bot. Put both foward and both tracks move.
In how much money do you give me the drum
Cara seria melhor vc utilizar uma bateria de notebook
Pointless if you can't link people to where you got the 2.4 ghz 3 channel remote controller.
they are pretty easy to find on google tbh and for most people id say to get a 4 to 5 channel if you decide to upgrade your bot with more weaponry you already have the parts and dont have to pay for a brand new one
@@BootlegHuman Any chance you could link me to 1?
@@secretgaminguk9806 www.modelsport.co.uk/carson-reflex-ii-6-channel-radio-with-receiver/rc-car-products/396371
pretty basic one but does the job
and heres a good 14 channel one if you want to implement a servo system for a weapon thats on a arm mechanism
www.modelsport.co.uk/carson-reflex-stick-multi-pro-14ch-2-4ghz/rc-car-products/395375
Chris P Bacon 3:51 what's the thing he is screwing the motors to?
Drum ka material khase melega
More robots please
What is the wooden thing?
Wood
Perfect beginner robot. How did you connect it to the controller?
The Receiver and transmitter that he bought
@@asset7729 where do I buy the transmitter
Is it removed now?
Shivam
Home
How much it weight
Around 7 kg
@@Junkyard250 can u make one with metal body (little small) have small tyres but fast with ramp(can be removed) instead of roller , removing bike battery and applying small battery that can be removed.. and weight under 5 kg
Wat circuit did u use can u please tell me..
This would destroy tombstone
Can someone send the code for this
Bello where I took that card
wow
2:50
Sir please aapka no. Dedo mujhe 1 chiz samajh nhi aa rhi h mene pura bna liya h
Controller name