wow ! it is much more complicate than i tough ! I don't like American joystick and I know only the Japanese joysticks..... I guess I need to discover the "Korean joystick".. thanks for the informations !
It's funny how i have consistent wavedash on my old Myoungshin yet on this brand new Taeyoung fanta i struggle... On paper Taeyoung fanta is superior to myoungshin but something is just weird about the diagonals on these... (The plastics, the materials the ... all feels better on the Taeyoung...) Meanwhile the difference of Myoungshin and Taeyoung is barely noticeable at times except the Taeyoung has a longer throw and the Myoungshin has a stiffer grommet... I feel like the diagonals are somewhat more narrow on the Taeyoung maybe? After some use it feels like on the Taeyoung QCF motions can be tricky to pull of since the rubber grommet feels like stiffer on the diagonals or idk... When i tried i kept getting down to forward without the diagonals meanwhile checking the lever in detail it seems like zero problems. So i think this tension is weird on these Taeyoung fantas maybe the harder rubber grommet in the Myoungshins make you do more rigid ~ harder movements and that way one don't skip the diagonals?! Just my guess, i will see if the Taeyoung gets any better after some months of abuse...
@@mundomando5051 If you have consistent wavedash on the Myoungshin, then why did you go for the Taeyoung? The diagonals on the Taeyoung were my main issues at first and it took a while for me to get use to it. My wavedash has gotten better on it but I'm still not 100% confident in it's execution. Electrics seem to come out consistently but things like 5 ewgfs or even 2 ewgfs f,f+4 don't always connect. I'm interested in the Myoungshin if it helps for consistent wavedashing. I just figured there wasn't much difference with it then the handle.
@@edsoad I actually switched to a new Myoungshin after about 3 months. The newer Myoungshin isn't that good as the old one as it is giving me a lot of missinputs. I tried Gersung GSM-V1623A3 switches in the new Myoungshin it become way stiffer with the 16.5 actuator it's pretty good! I still didn't try my Taeyoung with the A3 switches cos' I've run into a lever called "Fujin v3" and it feels very nice so i've stopped my experiments for a while and just use this as it just works. It seems like my Taeyoung's rubber grommat were the problem mostly as the Myoungshin's grommet had 4x molding holes in the 4 corners which somewhat reduced the corner tensions. If you stick to your Taeyoung fantas first try to switch out the grommet or drill the 4 diagonals yourself that should help with this diagonal problem.
Игры
wow ! it is much more complicate than i tough !
I don't like American joystick and I know only the Japanese joysticks.....
I guess I need to discover the "Korean joystick".. thanks for the informations !
can you use the grommets for the non collar korean levers? like the
crown 303 (sorry im noob and looking to build my first arcade stick)
Is your 60 a grommet heavier than ist 45 ?
do 309mj has a spring ? mine comes with no spring for the actuator. wtf ?
I'm interested in getting this mod but it's pretty expensive for the kit. I don't get consistent lp wave dash in the Taeyoung but it is a great stick.
It's funny how i have consistent wavedash on my old Myoungshin yet on this brand new Taeyoung fanta i struggle... On paper Taeyoung fanta is superior to myoungshin but something is just weird about the diagonals on these... (The plastics, the materials the ... all feels better on the Taeyoung...) Meanwhile the difference of Myoungshin and Taeyoung is barely noticeable at times except the Taeyoung has a longer throw and the Myoungshin has a stiffer grommet... I feel like the diagonals are somewhat more narrow on the Taeyoung maybe? After some use it feels like on the Taeyoung QCF motions can be tricky to pull of since the rubber grommet feels like stiffer on the diagonals or idk... When i tried i kept getting down to forward without the diagonals meanwhile checking the lever in detail it seems like zero problems. So i think this tension is weird on these Taeyoung fantas maybe the harder rubber grommet in the Myoungshins make you do more rigid ~ harder movements and that way one don't skip the diagonals?! Just my guess, i will see if the Taeyoung gets any better after some months of abuse...
@@mundomando5051 If you have consistent wavedash on the Myoungshin, then why did you go for the Taeyoung? The diagonals on the Taeyoung were my main issues at first and it took a while for me to get use to it. My wavedash has gotten better on it but I'm still not 100% confident in it's execution. Electrics seem to come out consistently but things like 5 ewgfs or even 2 ewgfs f,f+4 don't always connect. I'm interested in the Myoungshin if it helps for consistent wavedashing. I just figured there wasn't much difference with it then the handle.
@@mundomando5051 how are you going with it now mate?
Have you tried different switches?
@@edsoad I actually switched to a new Myoungshin after about 3 months. The newer Myoungshin isn't that good as the old one as it is giving me a lot of missinputs. I tried Gersung GSM-V1623A3 switches in the new Myoungshin it become way stiffer with the 16.5 actuator it's pretty good! I still didn't try my Taeyoung with the A3 switches cos' I've run into a lever called "Fujin v3" and it feels very nice so i've stopped my experiments for a while and just use this as it just works.
It seems like my Taeyoung's rubber grommat were the problem mostly as the Myoungshin's grommet had 4x molding holes in the 4 corners which somewhat reduced the corner tensions. If you stick to your Taeyoung fantas first try to switch out the grommet or drill the 4 diagonals yourself that should help with this diagonal problem.
Does it only work on fanta? Can it be used on Crown for modding?
Does the set contains all? And for crown and for fanta?
My joystick is buy and 49 st not proper working please help
Asik...
Ok thanks bru nice spring is bast mumnet silicon is not proper work
wish u hadn't used a music in the video but good tutorial
I’m sorry we don’t have much experience in video making, thank you for your feedback we will try better next time
Where can you get the metal golden core?
It is discontinued because to much friction from metal vs metal, we find plastic core perform better
the music is way too loud
This video would have been a thousand times better without the background music