Bars Leaks Block Seal Permanent HEAD GASKET FIX - How To Use And Review
HTML-код
- Опубликовано: 8 сен 2021
- In this video I test and review Bars Leaks Block Seal Permanent Head Gasket Fix. Our car was diagnosed with a blown head gasket and the repair estimate was around $2000 to get started with the potential for it even to cost more due to a cracked head or block. Our car was overheating and leaking antifreeze. I wanted to find an alternative solution to keep our old car running without spending a lot of money. Does Bars Leaks Head Gasket Fix work? Watch this video to find out! Always make sure when you are working with vehicles to wear the proper safety equipment and take all safety precautions. Thanks for watching!
AFFILIATE DISCLAIMER PLEASE READ:
The links below are affiliate links. This means I will earn a small commission, at no additional cost to you, if you choose to click the link and make a qualifying purchase. As an Amazon Associate I earn from qualifying purchases.
Amazon:
Bars Leaks Block Seal Permanent Head Gasket Fix On Amazon - amzn.to/3Z3tbEK
Basic Safety Equipment - Safety Glasses On Amazon - amzn.to/3IDvbfU
Basic Safety Equipment - Nitrile Gloves On Amazon - amzn.to/3J6BUAx
Basic Safety Equipment - N95 Masks On Amazon - amzn.to/41BrTCy
Basic Safety Equipment - Earplugs On Amazon - amzn.to/3kFfj4u
Intro/Outro Music: RKVC - Tropical Thunder
DISCLAIMER PLEASE READ:
For reasons beyond the control of Todd’s Garage there is no guarantee of the information in this video and/or description. Use of the information in this video and/or description is at your own risk. Todd’s Garage recommends the use of proper safety equipment and taking all safety precautions when working with the tools, items, or other things seen or talked about in this video and/or description. The information in this video and/or description does not guarantee a certain result or warranty of any kind, expressed or implied. Under no circumstances shall Todd’s Garage have any liability or responsibility for any injury, damage, or loss of any kind that may result from the use of the tools, items, information, or other things seen or talked about in this video and/or description. Any Injury, damage, or loss of any kind that may result from the use of the tools, items, information, or other things seen or talked about in this video and/or description is the sole responsibility and liability of the user. 
Авто/Мото
This stuff absolutely works …I had a blown head gasket on a Mitsubishi and pour this stuff in only once…..I kept driving this car for over a year but it was 13 years old I had already purchased a new car so I just sold it but it was rolling and no running hot issue’s so. It’s definitely worth it if you need to buy yourself some time
can you just pour that in? or do you need antifreeze or another liquid?
@@paul_ezmamaa it depends on the brand. Some brands like blue devil requires you to bleed out your coolant and fill your radiator with water to add it in. Other brands requires you use antifreeze with their product and some say either water or coolant is fine. Just gotta read the instructions.
@@Careless-sv6cfdepends on the leak my guy if it that bad this will not work.....
It is very good product, My 2006 BMW 530 had oil and water leaking, after using this product all issues were fixed, It is amazing
I used the head gasket repair on a 2001 Mercury Villager and it's still working I put it in the beginning of February and taking a few trips out of town so far so good
Thanks for watching!
How has it held up?
@@Yhappp it held up good but the water pump went out so it has sat for 4 months now. I don't know if I change the water pump the head casket would need changed
You will have a inspection hole on the water pump start it if it's dripping it's the water pump
@@momto7ify if you're doing the repair yourself then you might as well change the head gasket when you change your fuel pump. If you're paying a mechanic then that just gonna be between you and your mechanic since a head gasket replacement is probably gonna be another hour of work for them.
I am getting ready to use this stuff now. The instructions left me wondering. Man. The luck. I am using this on a 2000 concorde. 3.2. So my hopes are very high after seeing our nearly identical car getting this treatment. I need this to work. Its my work car. Cant be gumming up the family car and racking up the hard miles on it. I am at 270000 on my 3.2. Dear father in the garage!!! Let this work.
How is she holdin up?
Did you use it? Please give us your thoughts~
@@blazzing4321 she did not hold up. I used it on the chrysler and got a few more miles out of it. But she tapped out. I also put it in my daughters Subaru 2.5. No help at all. So now I’m out 100 plus bucks on a gimmick. Which really upsets me because i had such high hopes.
If the leak is too big this will not work.......
That bee is RUclips famous 🐝 👑 🐝👑
Was thinking about getting this. Is it still holding up
👍👍 I will be using the same product on my kia stinger 2.0 today...
Thanks for watching, good luck!
Interested in knowing if you used the product and if it is still holding?
@Jav M I used the product(with coolant and thermostat installed) but it didn't work for me, The coolant expansion tank keeps overfilled after a short drive.
I ended up replacing the head gasket but after 5 months started to overheat again...
After that, I decided to use BlueDevil Pour-N-Go Head Gasket Sealer the right way
As a last try before replacing the engine.
I drained the coolant, removed the thermostat, and flushed it with water.
After that filled with distilled water and BlueDevil and keeps it idle for 1 hour...
I used the car for two weeks without a thermostat and had no issues...
Then I replaced the thermostat with a cooler one at 80° c (the original is 100° c)
So far 6 weeks of this work and there is no overheating or expansion tank overfill.
@@citizens8773how about now?
Is it still holding up? Please make a part 2 showing mileage and longest drives its been able to hold, thank you
thank you
Was that a rad leak ? Im sure i have a head gasket problens honda civic. But pretty sure I also have a leaking rad and bought all 3 products. Standard verion. Alumun version and copper version. Which version best for rad leak?
Just put it in and it may be slowing the overheating down but not stopping it. Going to hold out hope that the seals will be plugged after driving it around a bit. The back of the bottle did say it could take a few days of usage before working.
any update?
@@kylecosta9424 not good, lol. I think the crack in the gasket/head is just too severe. If I drive the car around town gently, its okay, but highway, forget it. Starts running hot. My car is just shy of 150,000 miles and 12 years old. Shame because its really never had any major issues until this happened.
I wonder how long it will last please do an update on this video thank again
Is this solution still holding Todd? I looked but couldn’t locate a part 2 if you had uploaded. Thank you very much
Hi and thanks for watching. I haven't made a part 2 yet but thanks for looking. For us it is still working and we have no leaks and our car is not overheating. I will make an update soon thanks for reminding me!
I'm looking at buying a vehicle that has a similar issue so I'm gonna try this. I just did it on a 2013 Dodge avenger and it seemed to work pretty good
i changed the head gasket on my avenger and it’s already fucked up again fun ass cars but them motors be taking a BEATING 😂
Don't but it!
Could you let us know if it's still holding up
Did you have tk remove the thermostat
nice, ty
Should I remove my thermostat before using?
Your along qith most videos says just pour into engine HOWEVER when i go to bars webiste it has a completely different set of instructions,,it says bars leak isnt compatible with bars block sealer,,,it also says mix bottle with 3 quarts of warm water...
I applied this on a cold engine, started the car and kept it running for 20 minutes on idle. The next day toped the anti freeze and drove it around. At first the light remained on, later it turned off and remained off for two days before it came back on and has stayed on. Do I need to add more or change products?
I have a 1997 f150 4.6 not overheating I’m getting coolant into oil rough running and white smoke should I try this ? I’m reading mixed things on if it should be added if coolants going into oil
It worked on me gramps Crown Victoria taxi! Has 600.000! Miles! Bars is great
YOOO DUDE WHATS UP MICHEAL ITD MEEEE
MICHEAL BRO
REMEMBER DARELL
Did you take the thermostat off?
So I pour it in either the radiator or the coolant reservoir? Or only in the coolant reservoir?
What if your heater doesn't work?
warning 7 minutes of Todd reading the instructions,
😂😂😂😂
Thanks man
Someone has too
The overflow tank have to have empty??? Of antifreeze?
The bottle says it’s antifreeze compatible but honestly I’d recommend flushing anyways
Wait….. the 2nd time you topped off the antifreeze after the vehicle cooled down, was the vehicle running?
If the vehicle is running it cant cool down
The vehicle has to be turned off
I want to know if there's a benefit to the aluminum versus the liquid copper??
I tried the copper it worked for a bit. Imma try this aluminum stuff soon.
Hi and thanks for watching! I'm not sure, I would contact Bars Leaks hopefully they can get you an answer. I have tried both, this is what is currently in our car.
Yeah I mean maybe the aluminum works best for aluminum engines.
But I heard that what the copper is for. Not all can be added into your reservoir is the problem
Idk I tried the water pump one worked for over 2 years now it was the copper color too but its losing coolant again so ima try this one see if this that I thought the water pump was bad but the isn't over heating
👍
just put it in my 98 suburban 5.7L
I had
1. suddenly big time overheating with a milkshake pouring out of the radiator.
2. CLEAN oil on the dipstick
then I
1. bought a can of Bars leaks head gasket fix
2. waited for the engine to cool
3. overfilled the radiator with water to flush out the oil
4. siphoned out excess water
5. shook bottle and poured it in
6. turned heater on full
7. started it up
8. sat and panicked as I watches the temperature gradually move to 250
9. lost hope
10. watched the temp sink back to 200
11. yay!
Probably the solution was stuck on the thermostat then unclogged good stuff
@adamb84,
btw, you probably guessed there was another issue involved....the pink milkshake came from my radiator mixing up tranny fluid with coolant and coolant with tranny fluid🙁🙁🙁.... had to get tranny rebuilt
How much of the bottle does a Mercedes c300 2016 use ?
Thanks for watching, I am not sure, you will need to contact the company for that information.
Instructions say pour it in the radiator and only half a can, I have a 04 Toyota Tacoma should I put half or whole can?
Half if you have a 4 cylinder
It has to cool down total before it works full.
Does anyone know if you can use Bars Stop Leak multiple times? It was applied to my vehicle and it stopped the white smoke immediately…. However that lasted a few hundred miles and now the white smoke started to return. I just need the get the car up and running for another week so I can get it in the shop for repair. Thanks I’m advance to anyone who can help with this question!
Yes yiu can use it multiple times
Water is just pouring out of my muffler weep hole as soon as I fill the radiator⁉️⁉️
Is there a difference between permanent and professional I got permanent but people been saying get professional
yeah there is a difference between $5000 + professional vs less than $40 permanent, take a pick.
@@rubencv4552 When he says "Professional" he's talking about the bars leak professional HG sealer vs the regular bars leak permanent HG sealer. lol he's not referring to a mechanic
@@WATCHAL3X Exactly….
Should I flush out the radiator before applying stopleak?
Yes
No it says on the bottle you dont have to drain
No. Unless antifreeze is dirty
I thought you not supposed to put coolant with this stuff
Hey can I use this stuff on a 2011 jeep Laredo?
You can use it on any make
Do it seal the block if it's cracked?
good question. I imagine it can. It's going to find the leak and if it's HOT enough it should seal it. I'm guessing though
What if my heater dos not work? Can I still use it ?
@adamb84 update I still used it and it worked 😂
@@luiscastanon8149w mans
If the oil and coolant is mixed do I change the oil first before I do this or after
You should change oil and filter afterward.
@@andyphan3172 I am going to drive mine 100 miles after I do the fix then change it
After
I thought it was to be mixed externally with water and not to be mixed with anti freeze?
Can u use water???
I’m in the process as we speak?? Need some help
So can we use waters?
perhaps better to pour in with engine running.......coolant flowing?
the directions say not too but you do you
what if our heater doesnt work for that step 😭
Facts
small leak ruined my alternator guess ill try it on my 2003 matrix. wish me luck
Huh?
lol
Can u add water if u don't have antifreeze
Hi and thanks for watching! I would only add what the owners manual recommends for antifreeze for your vehicle. If you add water when you get into cold weather it will freeze which is not good and will hurt your vehicle. Thanks again for watching!
My car isn't overheating but it's smoking
@@tedkeedabooker8740 head gasket. Hopefully no oil in your coolant
@@tedkeedabooker8740 same.here smoking 🚬 more than me smoke .....try all bar leak head gasket.....car still smoking ....so change to use only water constaly add water ....cali no cold
Can you
Aren’t not suppose to add the antifreeze and sealant at the same time
Bars works with antifreeze. Seal Up and others do not.
That’s my assumption.
Did it work?
Hi Aaron, thanks for watching. So far it has been working for us.
Need Kseal of a water pump
How’s it holding up so far bro?
Hi, thanks for watching! So far for us we haven't had any leaks, I did make a follow up video if you want to watch.
How working?!?!?!
Thanks for watching! For us it is still working well thankfully!
its best to use regular water not Antifreeze they recommend
why pour into reservoir, why not pour into radiator?
Thats the radiator ,thats how the crysler look
This brand didnt work for me. I had to try again with blue devil brand and it worked
The head gasket is blown. No leaking though and it is overheating. Should I try this option..
yes it worked on mine. for a couple of dollars its worth a try
You sound like Donald duck 😂😂😂
that 3.5 motor is junk
All these Copper Colored products are the same. If you are getting bubbling out of your radiator After using product than you Still have a leaking head gasket. I’ve spent Hundreds to fix my 4cyl Toyota with bubbling out of the radiator filler hole at top of radiator from gases coming from a defective head gasket. The only ones that have fixed my head gasket are Sodium Silicate products. They will ask you to add Only to Water. They will damage your engine if you mix with Antifreeze!
Which product with sodium silicate do you recommend?
So you didn’t flush the engine first you didn’t mix the bars with a gallon or so of warm water and you didn’t top it off with water let it run 15 minutes turn it off let it cool drain everything out of the cooling system then fill it with the correct amount of coolant?
You just added the coolant to it and he is still circulating through your cooling system today
I have. Bars, leak block, seal, head, gasket, sealant… it’s not The same product stuff but both are made by bars leak
That’s why you’re not doing the steps and following the directions see
not yours has different directions which explained why you’re not following the directions I’m reading on my bottle
🤣👍🏽👍🏽
that’s not a blown head gasket ur radiator is leaking
It doesn't work..none of it works it's a temporary few days or so fix..the only thing that works is to mill the heads and replace the gasket..just check better business bureau on any of it..tells you all you need to know
It's Temporary not permanent
eingine rebuild on a prius now $5500.00
Lmao 😂 this is so bad for a vehicle
No, only if u dont follow instructions
Stop plugging your nose when you talk
OK so everybody that has commented, that it worked for them …
nobody actually follow directions and it still worked there are directions 3:36 with steps that are supposed to be done in a specific order. Draining flushing, adding it to warm water, then pouring it in topping it off with the water running it for 20 minutes setting it off let it go running again for 45 minutes then turning it off let it get cool and draining all the stuff out and then putting fresh coolant in it I’m just going by memory on this instruction just definitely a lot more to it according to their instructions and just pouring it in the radiator I’m just going by memory on this directions
You are supposed to pour it into radiator not resivore
That's where you're suppose to pour it. In the resevoir.
said by who?@@Pistol54Pete
Ahhh, yes squidward, aheh aheh aheh, 🥸