Thanks for this video. I ended up doing same setup and was definitely louder maybe 20% but tomorrow going to replace resonators with straight pipe and see how it sounds
So I have exhaust cutouts on my 5.7 challenger. They dump after headers but wanting to change the sound up from my super 40s when they’re closed would this sound like the cutouts opened?
Does anyone have any video sound clips of "four" 24250 Dynomax Race bullets on a 392 Challenger. I have two in place of mid mufflers, but want to change out the tips.
@@scattyjoe7472 I have the 24250 mini bullets where the mids were. Waiting for my tips, the putting another two in place of resonators. Just worried it would be too loud. Thanks for the info!
@@brianmf7697 ohhh yeah definitely. Put it in manual mode, put it in 2nd or 3rd gear, drive between 25-35mph, then let off the gas and you'll hear the craziest pops and crackles. Soooo addicting.
THIS...just solidified my decision.
I was just about to type this lol
Thanks for this video. I ended up doing same setup and was definitely louder maybe 20% but tomorrow going to replace resonators with straight pipe and see how it sounds
How did it sound?
Just put these on today because of this video..NO REGRETS!! My 392 ROARS!!!!
Awesome bro!!!!
Looks good & sounds beasty !
I miss Boston, used to do field service and had a car with commercial plates.
No rasp at all or just a little bit? & did you feel any power loss?
need to put these on my dakota 5.9 r/t, a 360 should sound real nice.
Also this video has my mind up for my 2017 scat shaker just what I wanted to see and hear !!! The sound of perfect !!!
Awesome!! Enjoy!
What about these bullets with a Borla ATAK?
“#MONSTER💪🏿👿”
How do you make yours backfire?
Damn that's rowdy!!
Oh yeah!!!! This is what I am doing to my 2020 scat pack!
At first I thought replacing reso and mufflers with straight pipe would be best but now I'm thinking reso delete and these 2450 bullets. Thoughts?
I agree 100
I just put them on my scatpack Dodge Challenger 💪🏾💯
So I have exhaust cutouts on my 5.7 challenger. They dump after headers but wanting to change the sound up from my super 40s when they’re closed would this sound like the cutouts opened?
It's hard to say since the sounds of the 5.7 vs 6.4 is different.
Take us for a drive down Storrow drive or over the Mass Ave Bridge!
Quick question, you have the bullets and stock resonaters? Great looking and sounds awesome.
Correct sir!
Thanks for the reply.
After you cut out the mufflers, they just slip over the stock pipes and get welded? Wondering if band clamps would work.
Yes but they MUST be welded! Will only cost you around $150, maybe cheaper.
Trending 4 Solutions Thanks. I was thinking so. I don’t think a clamp would have enough strength to for a proper seal. Sounds so good!
Does anyone have any video sound clips of "four" 24250 Dynomax Race bullets on a 392 Challenger. I have two in place of mid mufflers, but want to change out the tips.
I have quad race bullets on my scatpack… way cleaner n deeper sound then just the mids takes out the rasp at high rpms
@@scattyjoe7472
I have the 24250 mini bullets where the mids were. Waiting for my tips, the putting another two in place of resonators. Just worried it would be too loud.
Thanks for the info!
He delets th resonators and headers i think
Did you delete the resonators?
jackdillinger1 no just the mid mufflers.
Sweet SRT !!! It sounds Amazing man !! Do you still have it?
I sold her last year 😢😢😢. It was a fun 4 years but I received an offer I couldn't refuse, so I had to let her go.
@@GRB22 Aww man That's ok !! Maybe perhaps a Demon 170 In the Future?? Haha
@babybossrt4798 lmao I wish. Maybe a Raptor or TRX, though.
You think deleting the resonators would be too much with these mufflers?
Not sure. I think the mufflers delete is too loud already. Can't imagine the resenatora being removed.
Trending 4 Solutions Don’t even think about it! I did mine yesterday and I absolutely hate it!!!! I’m going back to a muffler delete only for sure!
@@DevillSRT You hate it because it was too loud or unpleasant sound?
george hennon unpleasant sound! Specially when you get on it 🤦🏻♂️
Has anyone swapped these for the rear resonators and did a mid muffler delete as well?
its gonna be too loud trust me
Wrong it’s not that much louder at all, it’s really deep and sounds way cleaner 💯 there’s no rasp just a deep growl you’d be surprised
I have quad race bullets on my scatpack
Drone?
jackdillinger1 not one bit!
Just weld.in.mufflers? Or custom catback
Yes correct. Weld in race bullets in place of the mid mufflers.
Are the race bullets the same as the stock mid muffler
@@inoaguirre9897 they are shorter than the stock mufflers and are a straight, flow-through design.
timerider313 ok thanks. So I will need additional piping. Thanks
Is it louder if you muffler delete it
No, it actually sounds cheap with just a muffler delete. Dynomax is louder and more deeper, and sounds like a true muscle car.
@Trending 4 Solutions what is the difference between the 24250, 24222, and the 24215?
24250 is louder IMO. From the research I've done on the others they have deeper idles but not as loud overall.
Trending 4 Solutions makes sense because it is the smallest of the race bullets. I am deciding between the race bullet and the super10s
@@mikereeves282 The Race Bullets would definitely be louder than Super 10s
Are the stripes a black gloss vinyl? What brand?
No there Matt black and there factory installed stripes.
What’s louder a muffler delete or race bullets
Race bullets. A muffler delete sounds cheap and unfinished.
Can you hear more popping sounds than a regular muffler delete
@@brianmf7697 ohhh yeah definitely. Put it in manual mode, put it in 2nd or 3rd gear, drive between 25-35mph, then let off the gas and you'll hear the craziest pops and crackles. Soooo addicting.
Now take off the splitter guard. The SRT design chief says they look goofy and ruin the lines of the car.
It has since been removed!
Bitchin!
Super 10s sound better