It works! Successfully done, using Macbook Air 2018 to target Macbook Pro (M1) 2020. A very clear and helpful guide video. Thank you very much. (Note: Yes, it needs to be exactly 10 seconds to make it work, not more not less. Following a clock second will help you a lot. It took me 2 times to get it work.)
Bricked my MacBook Air M1 (by using Migration Assistant). Tried this method using an older MacBook Pro with Usb a to Usb C adaptor. Worked putting it into DFU mode. But the last step (4/4) fails, giving an Error 53 shortly after showing the Apple logo on the M1. Tried it multiple times, it always fails with Error 53.
After an hour talking to Apple Support and 7 hours trying to figure this out myself, a 10 minute video walked me through it. You, my man, saved me a long trip to the Apple Store.
Great video, some additional tips for using this video - 1) Make sure you use the correct usb-c port, certain ones are DFU capable, others are not. I was doing this on an M2 Macbook and I needed the top left, as per the video. 2) On some of these new macs, even touching a single key can turn it on, be careful when starting the process. 3) Don't bother trying to count this yourself, let the video count for you! Just be ready on the keypress and press the keys, as per the video, release as per the video, it's soooo much easier and with this approach I've been able to access DFU every time.
Apple silicon only : yes,.. so its different for Intel Mac. I still reckon it's a design flaw why Apple instructs you to press "Power/TouchID" to power on these Mac's or Intel Macs, but truth be told, you can do the same with bottom row of keys and track-pad button too. Affected mac would power on, just got "Failed to Activate" from Recovery and ssd was wiped., This worked 100%
This video is really a life saver. Two days ago i was trying to clean install mac os ventura on my mac air m2 2023. But i erased the Mackintosh hd and it restartd and got a circle with an exclamation ❗ mark. I was in disarray. Panicked and contacted apple care . They asked to submit the device. Apples warrenty terms are horrible and i had not opted for apple care. I was dreading its cost even it was just 2 month old. Then i came across this video on youtube. Arrangef a intel mac air of 2015 model , installed apple configurator and followed the step . I used my vivo mobile charger cable usb a to c and on first instance it failed to revive my device but when i opted the erase and restore option , it worked ! Unbelievable! A 7 year older mac is restoring life on 2023 mac! Really thanks a lot.
Unknowingly erased my M1 Macbook disk while trying revert to Big Sur from Monterey beta, once erased you have sort of semi bricked ur Macbook, I struggled for over 4 hours to get this sorted trying out different guides online, but nothing worked. Accidentally stumbled upon this video on RUclips and wow this was God sent, it took me just 20 mins to get my M1 Macbook booting back on BigSur again, perfect video with clear instructions especially the Key combination to get the M1 Macbook in DFU mode. Thanks a ton, you saved me from the hassle of going back to Apple service center.
Still works in 2022! Updated my M1 Pro 16" MBP to macOS Monterey 12.1, then shut it down for the night. Next morning, immediately to the Explanation Point of Death. Could not boot to recovery or boot options. Phone call to Apple Support and a visit to the Apple Store did not help. Apple Store was using an older MacBook with a similar procedure in this video. I dont have a spare MBP lying around, so I got an M1 MacBook Air from the Apple Store used the USB-C cable it came with to follow the procedure in this video. Was able to do a Revive on the first attempt. YOU SAVED MY DATA THANK YOU FOR THIS VIDEO!
This video was the answer. Phone support failed. All the Apple stores in my region are closed. Apple was about to have me send my M1 MB pro back and have me reorder a new one. Then I found this video. You saved me a 4+ week turn around on a new M1. Thank you so much!
I have MacBook Pro 2017 and its latest update is Ventura 13.6.4. And it says it’s up to date. Apple configuratir needs update 14 and because of this doesn’t download (((
You are a bloody wizard mate. I tried many tricks and many videos but only yours worked! Your timing in the video (where you count) is a precision model!!!
I love the new boot mode on my M1 Macbook pro, for DFU mode I just wish when it says 'Keep holding to boot recovery mode' it had something like "Keep holding to boot into recovery mode" then something like "Release now for boot options or keep holding for DFU mode" then a little countdown started before enter DFU incase you no longer need it.
Can’t thank you enough. Heads up for future watchers: Make sure the second MacBook is using the same OS - OpenCore Legacy Patcher for older Macs Try a different cable. Two of the three ones I bought specifically because they claimed it’d do power + data didn’t work, and I couldn’t enter DFU mode without it
I can never thank you enough for this super helpful tutorial. You are a lifesaver brother! After trying everything for two days this video made it a piece of cake. You are a TRUE LEGEND. ✌️
Thanks for the video. BTW, for anyone interested, I just faced this issue but didn't have an older Mac. I did pull it off with VMware and Big Sur 11.1. It was a process but it worked without suprises. Good luck all. Saved a trip to visit 'the Geniuses' lol.
Thank u for sharing this. After two days of hitting my head against the wall, I’ve been able to restore my Mac with the help of this video. Big thanks again
You saved my new laptop! I thought I would have to go to the apple store but this worked. I used a USB-A to USB-C cable and an older Mac. You are absolutely right that it's important to time the button presses correctly.
THIS is the only fix that allowed me to restore my M1 MBP. USB, recovery, and terminal restore all failed after M1 MBP was upgraded to 11.0.1. Thank you so much for providing this fix.
You bet Song! Thank you for the comments, it was frustrating for sure. macOS Big Sur 11.1 should fix this issue but sadly its too late for everyone who got the first Apple Silicon Macs!
Wow thanks so much! I read more than a dozen articles on DFU mode for M1 Mac (including apple's own docs) and this is the ONLY one that worked!!! Thanks very very much. So annoying though.
OMFG! Bro you've saved my life! I've been trying to get into my iMac I had bought and it was stolen and then recovered and the thief locked me out remotely of my own computer! This worked first try and didn't cost me any additional money! Thank you so much! Seriously!
Logged in just to like and subscribe. I loved my M1 Air until I broke it and had to fix it, and the hardware fixes were by far the easiest part. Thanks for documenting what Apple refuses to!
Oh wow! THIS was excellent! I spent hours trying to make it work from the Apple help pages - then I found your video and within an hour I had my new Mac M1 up and running again! YOU are awesome! Thanks for being there for us!
OMG you are a life saver. Just got an open box macbook air and trying to wipe it cause me to end up with the exclamation point. Followed apple guide for DFU mode and had zero luck. Ironically your method works and apple seems to list the step wrong. Press and release the power and then hold the combo of keys...That didn't work. Followed along with you and the video and instantly got DFU mode. Twice in a row too since I tied to revive with no luck and had to do the restore. Thank you so much. I think I am tech savvy but this one was a real struggle. Very much appreciate you posting this and other videos that have been very helpful!
Legendary. it sucks you have to have a 2nd Mac, but if you can get your hands on a 2nd device this video saved me. I even took this to a MAC reseller and they couldn't accomplish this. Thank you so much!
it worked like charm, thanks a lot. used to revive the mac OS Sequoia 15.1.1 sucesfully which was on a recovery loop. this video highlight is putting the mac on DFU mode and the counting style worked.. thanks a ton
Thank you SOOOOO MUCH! this saved me! Also GREAT video - you included just the need to know and not all the babble! I will always remember this act of kindness you put out in the world. Thank you so much again!
Will storage from the device used to fix the m1 macbook be wasted? Or will storage not be taken up? And once you get to the start up screen can you unplug the cable? Sorry for all the questions lol
do we really need type c cord? like i have usb type a with type c at the end or type c with type c only? i have macbook air it doesnt have type c so i dont know if this well work
Hi! my macbook air's screen was broken so I'm using an external monitor. However, It got corrupted and I can't login. I tried restoring my laptop using another macbook. However, I can't get through. It keeps gving me an errror that my Device is not booted. Please help. :(
Thank you for this video. This solved my issue with computer account creation failing every single time. Reinstalling the system from scratch didnt help but putting it in dfu mode exactly like in this video solved my issue within 10minutes like mentioned in your title.
Many thanks for this absolutely brilliant video. My new Mac Mini M1 kept failing to complete the update from 11.1 to 11.2. I tried all sorts of solutions (which involved downloading the update files around 10 times!) before I discovered this video. I connected the Mini to my old Macbook Air, dowloaded the ispw file as you suggested and it worked like a treat. Again, many, many thanks for your clear and concise video.
As others have said, your counting was the key! So simple. I wish Configurator 2 would count us down too.. .but this was perfect. After HOURS of frustration. Thank you!!!
@@Mr.MacintoshI forgot my recovery key and don't remember apple id either and Mac setting does not allow me to boot from external drive either as it's kept on High Security mode. Will this method work so I can reinstall OS on my Mac?
I tried going through the Apple help pages and got super frustrated with it! They don’t mention that it only works when you plug in the USB-C cable in the first port. Thank YOU!
Thank you so much! I had my working Macbook Air M2 connected to power so everytime I tried turning off my dead Macbook Pro M1 it auto-restarted and couldn't ever turn it off with the cable plugged between them. Watching your video helped me realize I had to unplug my Macbook M2 from power and leave only the USBC cable between both macbooks.
Entering DFU mode is easy on an M1 iMac. Just disconnect from power, hold the power button down, connect to power and continue holding the power button for 3 seconds. The cable should be connected to the USB port nearest to the stand
Seems like it’s near impossible to get it in DFU mode without this video. Just wanted to say thanks. Such a lifesaver. Really wish Apple would consider the end user before making these type of changes. 🤦♂️
QUESTION: Does this method work for restoring backwards from Monterey to Big Sur? I have both a 2020 M1 and Intel MacPro and want to WIPE my M1 and do a Clean Install. It use to be very easy to wipe drives and do CLEAN Reinstalls. Not so easy anymore. I do not want to attempt it until I know more details for fear of Bricking my M1. When installing the ISPW File - Can you go BACKWARDS with the Firmware version? I always thought Firmware could never go back in time. Also - When I try to re-install my M1 OS, it only gives me the option to install Monterey. I do not want to Install Monterey. I want to reinstall the Original Software that came with my Mac which was Big Sur. I've watched all your videos but not sure what approach to take. DFU seems like a good approach but a little worried since I have never done it before and do not want to screw things up.
I have a macbook pro 2020 A2251, but it doesn't have M1, it can work, I can't restore, always try to start a clean installation in catalina, download from the network, it doesn't finish and there are 2 minutes left, I've done a lot of things but I haven't been able to get it to work the Mac. I don't know how I can solve it. Thanks for the guide and help.
I have the M1 MBP and it did not work as it immediately booted whenever I touched the Power button. Damn. Apple says: FIRST press and release JUST the Power button THEN use the 10sec combination use explained. Then it worked fine. Thx!
Hello @CONALMASPAINUK, The OCLP devs are still working on the patches for Sonoma and is not supported yet. As soon as OCLP is supported for Sonoma I will let everyone know asap.
I followed your link, everything went fine as per your instruction till the installation part, after it rebooted and again keep going for the "loading startup options" - reboot in look and every time rebooted its going to the start options gear icon, any idea?
I’m getting a message saying “ The OS cannot be restored on this device “ when dragging the ipsw file in the dfu box . I’m using the restore option to get the recovery partition back to big sur
Nope! Apple Silicon Macs DO have NVRAM Settings. You can use the terminal command "nvram -p" to look at the settings. But there is no startup keyboard command to clear the settings.
Hopefully this video will help anyone who is still having issues booting an Apple Silicon Mac into DFU mode. Let me know if you have any questions!
Your DFU method dont work
It works! Successfully done, using Macbook Air 2018 to target Macbook Pro (M1) 2020. A very clear and helpful guide video. Thank you very much. (Note: Yes, it needs to be exactly 10 seconds to make it work, not more not less. Following a clock second will help you a lot. It took me 2 times to get it work.)
Bricked my MacBook Air M1 (by using Migration Assistant). Tried this method using an older MacBook Pro with Usb a to Usb C adaptor.
Worked putting it into DFU mode. But the last step (4/4) fails, giving an Error 53 shortly after showing the Apple logo on the M1. Tried it multiple times, it always fails with Error 53.
Hi Mr.Macintosh, my start up disk is not coming up, do you have any advise?
What if instead of using the ipsw from the website, I try the MacOS firmware downloaded from the mac appstore?
After an hour talking to Apple Support and 7 hours trying to figure this out myself, a 10 minute video walked me through it. You, my man, saved me a long trip to the Apple Store.
Jesse, that is great news! Thank you for the comment and I'm glad you got your Mac up and running again 👍
After 10 hours THIS THE ONE... Thank you
No cap literally 10 hrs
Does this actually work
I honesty think this a record for how long people can stay on the support line for.
@manikandan.m2902 Air should be fine..
Great video, some additional tips for using this video - 1) Make sure you use the correct usb-c port, certain ones are DFU capable, others are not. I was doing this on an M2 Macbook and I needed the top left, as per the video. 2) On some of these new macs, even touching a single key can turn it on, be careful when starting the process. 3) Don't bother trying to count this yourself, let the video count for you! Just be ready on the keypress and press the keys, as per the video, release as per the video, it's soooo much easier and with this approach I've been able to access DFU every time.
Apple silicon only : yes,.. so its different for Intel Mac.
I still reckon it's a design flaw why Apple instructs you to press "Power/TouchID" to power on these Mac's or Intel Macs, but truth be told, you can do the same with bottom row of keys and track-pad button too.
Affected mac would power on, just got "Failed to Activate" from Recovery and ssd was wiped.,
This worked 100%
This video is really a life saver. Two days ago i was trying to clean install mac os ventura on my mac air m2 2023. But i erased the Mackintosh hd and it restartd and got a circle with an exclamation ❗ mark. I was in disarray. Panicked and contacted apple care . They asked to submit the device. Apples warrenty terms are horrible and i had not opted for apple care. I was dreading its cost even it was just 2 month old. Then i came across this video on youtube. Arrangef a intel mac air of 2015 model , installed apple configurator and followed the step . I used my vivo mobile charger cable usb a to c and on first instance it failed to revive my device but when i opted the erase and restore option , it worked ! Unbelievable! A 7 year older mac is restoring life on 2023 mac! Really thanks a lot.
Unknowingly erased my M1 Macbook disk while trying revert to Big Sur from Monterey beta, once erased you have sort of semi bricked ur Macbook, I struggled for over 4 hours to get this sorted trying out different guides online, but nothing worked.
Accidentally stumbled upon this video on RUclips and wow this was God sent, it took me just 20 mins to get my M1 Macbook booting back on BigSur again, perfect video with clear instructions especially the Key combination to get the M1 Macbook in DFU mode. Thanks a ton, you saved me from the hassle of going back to Apple service center.
Still works in 2022! Updated my M1 Pro 16" MBP to macOS Monterey 12.1, then shut it down for the night. Next morning, immediately to the Explanation Point of Death. Could not boot to recovery or boot options. Phone call to Apple Support and a visit to the Apple Store did not help. Apple Store was using an older MacBook with a similar procedure in this video. I dont have a spare MBP lying around, so I got an M1 MacBook Air from the Apple Store used the USB-C cable it came with to follow the procedure in this video. Was able to do a Revive on the first attempt. YOU SAVED MY DATA THANK YOU FOR THIS VIDEO!
Thank you so much. This worked and helped me recover my macbook pro m1.
This video enabled me to fix my bricked Mac M1. Thank you so much for the clear and succinct guidance.
Did you revive or restore?
This video was the answer. Phone support failed. All the Apple stores in my region are closed. Apple was about to have me send my M1 MB pro back and have me reorder a new one. Then I found this video. You saved me a 4+ week turn around on a new M1. Thank you so much!
Awesome John! I'm really glad you got your M1 pro back up and running again!
I have MacBook Pro 2017 and its latest update is Ventura 13.6.4. And it says it’s up to date. Apple configuratir needs update 14 and because of this doesn’t download (((
dude you have no idea how much I love you
I followed apples site, tried 100 times, failed, watched your video once, followed along exact and worked perfectly. Thank you!
Mannnnnnn... If I was working on a pc then I wouldn't have never gotten this far to find this fix! Thank you so much. Saved my life!
You are a bloody wizard mate. I tried many tricks and many videos but only yours worked! Your timing in the video (where you count) is a precision model!!!
Glad it helped Igor thank you!
I love the new boot mode on my M1 Macbook pro, for DFU mode I just wish when it says 'Keep holding to boot recovery mode' it had something like "Keep holding to boot into recovery mode" then something like "Release now for boot options or keep holding for DFU mode" then a little countdown started before enter DFU incase you no longer need it.
Thanks!
Can’t thank you enough.
Heads up for future watchers:
Make sure the second MacBook is using the same OS - OpenCore Legacy Patcher for older Macs
Try a different cable. Two of the three ones I bought specifically because they claimed it’d do power + data didn’t work, and I couldn’t enter DFU mode without it
The info in this video is priceless! 3yrs later and it's still helping ppl
Three years later, this still works better then Apple support articles, thanks King 👑
THANKYOU SO MUCH! Apple support couldn’t even help me 😭
You bet Yeety!!!
I can never thank you enough for this super helpful tutorial. You are a lifesaver brother! After trying everything for two days this video made it a piece of cake. You are a TRUE LEGEND. ✌️
Thanks for the video. BTW, for anyone interested, I just faced this issue but didn't have an older Mac. I did pull it off with VMware and Big Sur 11.1. It was a process but it worked without suprises. Good luck all. Saved a trip to visit 'the Geniuses' lol.
Thank u for sharing this. After two days of hitting my head against the wall, I’ve been able to restore my Mac with the help of this video. Big thanks again
Awesome! I'm really glad this video helped you 😀
You saved my new laptop! I thought I would have to go to the apple store but this worked. I used a USB-A to USB-C cable and an older Mac. You are absolutely right that it's important to time the button presses correctly.
I'm glad that you got your mac up and going again Coleman!!!
What Macbook model did you use to make it work?
THIS is the only fix that allowed me to restore my M1 MBP. USB, recovery, and terminal restore all failed after M1 MBP was upgraded to 11.0.1. Thank you so much for providing this fix.
You bet Song! Thank you for the comments, it was frustrating for sure. macOS Big Sur 11.1 should fix this issue but sadly its too late for everyone who got the first Apple Silicon Macs!
Wow thanks so much! I read more than a dozen articles on DFU mode for M1 Mac (including apple's own docs) and this is the ONLY one that worked!!! Thanks very very much. So annoying though.
Jonathan, I'm glad this worked for you! The process is annoying for sure!!!
OMFG! Bro you've saved my life! I've been trying to get into my iMac I had bought and it was stolen and then recovered and the thief locked me out remotely of my own computer! This worked first try and didn't cost me any additional money! Thank you so much! Seriously!
Did it work after connecting eternet?
Logged in just to like and subscribe. I loved my M1 Air until I broke it and had to fix it, and the hardware fixes were by far the easiest part. Thanks for documenting what Apple refuses to!
Oh wow! THIS was excellent! I spent hours trying to make it work from the Apple help pages - then I found your video and within an hour I had my new Mac M1 up and running again! YOU are awesome! Thanks for being there for us!
OMG you are a life saver. Just got an open box macbook air and trying to wipe it cause me to end up with the exclamation point. Followed apple guide for DFU mode and had zero luck. Ironically your method works and apple seems to list the step wrong. Press and release the power and then hold the combo of keys...That didn't work. Followed along with you and the video and instantly got DFU mode. Twice in a row too since I tied to revive with no luck and had to do the restore. Thank you so much. I think I am tech savvy but this one was a real struggle. Very much appreciate you posting this and other videos that have been very helpful!
The best Mac youtube page! Only power tips!!!
Thanks, fro Brazil!
Thankyou is not enough.. u saved me
Legendary. it sucks you have to have a 2nd Mac, but if you can get your hands on a 2nd device this video saved me. I even took this to a MAC reseller and they couldn't accomplish this. Thank you so much!
it worked like charm, thanks a lot. used to revive the mac OS Sequoia 15.1.1 sucesfully which was on a recovery loop. this video highlight is putting the mac on DFU mode and the counting style worked.. thanks a ton
Hey can you help me? My laptop's recover mode doesn't show any wifi icon. Is your issue the same.
Hi, great video,
I have tried this process 4 times,
But target mac m1, keeps going back to activate mac stage, am i doing something wrong?
Hello and how are you, I have a kind a problem, I got a MacBook pro early 2020 i7 but when I try turn on, show me choose the network, what can I do.
Can this be done on a Mac Pro 2009? I think I bricked my Mac Pro?
Changed USBCs like 3 times and getting same damn 5V 0.0A. This was the issue. Thank you !!!!
Glad you got it Tony!!
Very logical and clear guide. Helped me restore a M1 Macbook with a formatted SSD. Thank you!
Thank you SOOOOO MUCH! this saved me! Also GREAT video - you included just the need to know and not all the babble! I will always remember this act of kindness you put out in the world. Thank you so much again!
Thank you very much @user-js3vk4oq2h !!👍
Will storage from the device used to fix the m1 macbook be wasted? Or will storage not be taken up? And once you get to the start up screen can you unplug the cable? Sorry for all the questions lol
do we really need type c cord? like i have usb type a with type c at the end or type c with type c only? i have macbook air it doesnt have type c so i dont know if this well work
Thanks a lot...almost 8hours finally I saw this vedio, it helps me a lot to solve my problem !! Really appreciate you to upload this vedik
Thank you Yi Ying!!!
My guy, you just saved my data and my laptop another trip to apple support. You are awesome 😊
Hi! my macbook air's screen was broken so I'm using an external monitor. However, It got corrupted and I can't login. I tried restoring my laptop using another macbook. However, I can't get through. It keeps gving me an errror that my Device is not booted. Please help. :(
Thank you for this video. This solved my issue with computer account creation failing every single time. Reinstalling the system from scratch didnt help but putting it in dfu mode exactly like in this video solved my issue within 10minutes like mentioned in your title.
Awesome Jukka!! I'm glad this worked for you 👍
Leo LaPorte spoke about you on his talk show today.
I found it David!!! 🤣ruclips.net/video/r7k7DSivixY/видео.html
Many thanks for this absolutely brilliant video. My new Mac Mini M1 kept failing to complete the update from 11.1 to 11.2. I tried all sorts of solutions (which involved downloading the update files around 10 times!) before I discovered this video. I connected the Mini to my old Macbook Air, dowloaded the ispw file as you suggested and it worked like a treat. Again, many, many thanks for your clear and concise video.
Thank you Leigh! I'm really glad you found this video and fixed your Mac!!!
As others have said, your counting was the key! So simple. I wish Configurator 2 would count us down too.. .but this was perfect. After HOURS of frustration. Thank you!!!
I'm really glad this helped you @techtiptroy! I'm not sure why apple made it so hard.
@@Mr.MacintoshI forgot my recovery key and don't remember apple id either and Mac setting does not allow me to boot from external drive either as it's kept on High Security mode. Will this method work so I can reinstall OS on my Mac?
How to recover a m1 mac mini as i have wireless keyboard
I tried going through the Apple help pages and got super frustrated with it! They don’t mention that it only works when you plug in the USB-C cable in the first port. Thank YOU!
Thank you so much! I had my working Macbook Air M2 connected to power so everytime I tried turning off my dead Macbook Pro M1 it auto-restarted and couldn't ever turn it off with the cable plugged between them. Watching your video helped me realize I had to unplug my Macbook M2 from power and leave only the USBC cable between both macbooks.
After countless tries, this worked for me. Thank you.
Entering DFU mode is easy on an M1 iMac. Just disconnect from power, hold the power button down, connect to power and continue holding the power button for 3 seconds. The cable should be connected to the USB port nearest to the stand
May I use this process to take the data from a macbook pro with m1 pro that has hardware issue and doesn't start?
Funciona si está en, Activación Lock?
Seems like it’s near impossible to get it in DFU mode without this video. Just wanted to say thanks. Such a lifesaver. Really wish Apple would consider the end user before making these type of changes. 🤦♂️
Thanks for the video Mr Macintosh. It really helped out.
I was wondering if you can use the Apple Configurator that is iCloud locked?
Yes, you can BUT as soon as you boot it back up it will ask to activate and continue to be locked.
Wouldn't it be fast when using a USB 3 or even Thunderbolt cable? As far as I know the MacBook Pro charging cable only supports USB 2.0 speeds.
Awesome video and tutorial! It helped on my new m1 mba get out of a jam today.
Good this method will also allow u to remove efi locked code on ur t2 /m1 MacBook
You, saved me a long trip to the Apple Store. Thanks!
QUESTION: Does this method work for restoring backwards from Monterey to Big Sur? I have both a 2020 M1 and Intel MacPro and want to WIPE my M1 and do a Clean Install. It use to be very easy to wipe drives and do CLEAN Reinstalls. Not so easy anymore. I do not want to attempt it until I know more details for fear of Bricking my M1. When installing the ISPW File - Can you go BACKWARDS with the Firmware version? I always thought Firmware could never go back in time. Also - When I try to re-install my M1 OS, it only gives me the option to install Monterey. I do not want to Install Monterey. I want to reinstall the Original Software that came with my Mac which was Big Sur. I've watched all your videos but not sure what approach to take. DFU seems like a good approach but a little worried since I have never done it before and do not want to screw things up.
you were able downgraded ?
@@VideoyIvana No..I have not attempted it. Afraid it will not work and my M1 Mac computer will be useless.
@@CanesFan65 thank you for responding 🤗
So I’m trying this but seems like my target m1 mac is not charging but it’s a solid orange light… and usb c charging is not working either? Any ideas
Good video on how to do this. Can you make a video showing us how we can make our own MacOS IPSW files?
Worked Great!!! thank y
ou very much
You're welcome Jorge!!
Great video! How to download IPSW for INTEL MAC?
I have a macbook pro 2020 A2251, but it doesn't have M1, it can work, I can't restore, always try to start a clean installation in catalina, download from the network, it doesn't finish and there are 2 minutes left, I've done a lot of things but I haven't been able to get it to work the Mac. I don't know how I can solve it. Thanks for the guide and help.
How can I get Configurator for Intel Mac and Catalina?
Unfortunately my second Mac (M1 MBA) will not detect my M1 MBP in DFU mode. I followed all the correct steps
try connect USB C to different ports bro
I have the M1 MBP and it did not work as it immediately booted whenever I touched the Power button. Damn.
Apple says: FIRST press and release JUST the Power button THEN use the 10sec combination use explained. Then it worked fine. Thx!
Your DFU method worked at the first attempt. Thank you!
I just purchase a macbook air that is lock is from 2020 will this work so i can restore it
This worked like a charm for me. Thanks alot
You're welcome Rubi! 👍
Amazing video and very helpful
i want to buy an ID locked m1 MBP so will the password disappear after I use your DFU mode method
Amazing video. so clear and helpful.
Straight and to the point, thank you VERY much.
Excellent! Very useful, very well presented! Keep up the great work!
You're the real MVP! Thank you!
awesome! thx a lot !!! very good explained and showed, no unusual talks !))
Thanks @baikoffski6548 !!!
Hello @CONALMASPAINUK, The OCLP devs are still working on the patches for Sonoma and is not supported yet. As soon as OCLP is supported for Sonoma I will let everyone know asap.
My recently-revived M2 MacBook Air thanks you for this video. :-)
Thank you so much! Appreciate you and this video so much! Saved my Mac
You are a great teacher. Thanks and keep going
The saviour is here.
This is awesome, thank you so much. I actually used windows macOS VM and Apple configurator and it worked a treat surprisingly!!
Bro Can you help me
I followed your link, everything went fine as per your instruction till the installation part, after it rebooted and again keep going for the "loading startup options" - reboot in look and every time rebooted its going to the start options gear icon, any idea?
Mr. Macintosh thank you very much, your explanations are very good! Get DFU Mode easily, because as I pressed the MAC keys, I heard your count :-)
Glad I could help Sergio! You will always remember 1-one-thousand - 17-one-thousand haha!
It failed few times, because I had my battery empty. Thanks for the video 👍
Nice tutorial. U saved my life. Thanks alot :)
You bet @buckbugs!! I'm glad you are back up and running 👍
I did all the steps but it always get stuck on on the step 4 and showing me the same message again whats is the problem
Awesome! Thanks a lot, this tutorial helped me a lot. I needed to retry more than 10x, but finally it worked!
Hello my friend great video.Formatting the M1 and re-installing MacOs will disable icloud? .Thanks in advance
Finaly I find good tutorial for that!
Thank you so much
absolutely amazing video! Thank you so much!!
I tried to do this my max was on a boot loop and I tried putting it on dry mode now it won’t turn on can you advise?
Thank you so much for nice and useful explaination
I’m getting a message saying “ The OS cannot be restored on this device “ when dragging the ipsw file in the dfu box . I’m using the restore option to get the recovery partition back to big sur
You´re a BEAST. The video was helpful second to none. Thank you so much for this support!
What would the next step be if I've tried this but it still doesn't pop up in configurator?
Question - do Apple Silicon Macs have NVRAM and SMC like Intel Macs, and if so, how do you reset them?
Nope! Apple Silicon Macs DO have NVRAM Settings. You can use the terminal command "nvram -p" to look at the settings. But there is no startup keyboard command to clear the settings.