Это видео недоступно.
Сожалеем об этом.
EASY DIY RETROFIT Bi-LED Projector | Blackout Headlights | Hexagon Halo Angel Eyes | Proton Persona
HTML-код
- Опубликовано: 18 дек 2020
- Hi guys I hope you've enjoyed the video!
Product links (not affiliated):
Sanvi Bi-LED Projector m.tb.cn/h.48LL58S?sm=dcda58
Butyl rubber for sealing m.tb.cn/h.461rdkb?sm=aec8a8
Hexagon Halo Angel Eyes a.aliexpress.com/_mLtH1aV
Music
"ROAD" Royalty Free Music [No Copyright] Trap Hip Hop Beat
Royalty Free Music - No Copyright - Smooth - Chill Lo Fi Hip Hop Beat (Prod.by Drumatised)
provided by CFM Production
/ @copyrightfreemusiccfm
provided by CFM: cfmfreemusic.com
Timestamps
• 0:00 Intro
• 0:15 Sanvi Bi-LED projector
• 0:45 Disassemble bumper to remove headlamps
• 1:11 Heat headlamps, remove lens
• 1:45 Spray paint reflectors
• 3:29 Install projectors and Halo LEDs
• 5:10 Final product and comparison
Disclaimer:
Due to factors beyond the control of Project Gostan, I cannot guarantee against improper use or unauthorized modifications of this information. Project Gostan assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Project Gostan recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Project Gostan, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Project Gostan.
Brightened my day just like how you illuminated the car park
Yeeluminatee
I did this on my 2010 Picanto. One thing to note is don't forget to make sure beam is perfectly flat before gluing it back because you can only adjust left-right and up-down after that. This is very important because misaligned high output projector is much more blinding to other driver than LED/HID on reflector housing.
That is very true. I did not show that in the video but I actually had to reopen and reinstall it!
That was brutal bro!
Lawa gila.
Great job!
Dear Proton, this is what we called a modern headlight.
No more Halogen pls.
Kita dah masuk 2021.
All new facelifts should've used LEDs + projectors.
Thanks bro means a lot!
X kena saman ka kalau pakai lampu putih ?
Thanks! That’s very informative 💡
Well done 👍 gorgeous!
Thankss bro
Tis is so damn cool but bro wtheck?! I’ve been searching for this and went thru ur profile but just this one video? U need to grow this channel bro!!! 🤯🤯🤯
Wow amazing tutorial, can’t wait to attempt this on my car as well
Thanks for the support g. Here's some kimbaps for u 🍣🍘🍙🍥
really decent job 👍🏼👍🏼
Im lovin it 😍
That was insane berooo..Can you teach or show the diagram how the wiring u connected?That will really help us
Really nice work
Thanks boss appreciate it!
Sick lights yo
Wowww..so nice n awesome broo.. Love this content, done support 👍🏻👍🏻👍🏻
Thanks bro means a lot
Yo bro dat was sick af ! Keep up the good work !
Btw if you wouldn’t mind may I know where and what type of biled u used ya?
@@zufat4714 thanks a lot man appreciate it.
I'm using sanvi S8 2.5inch bro. Be sure to get RHD ones!
omg cool 😍
We definitely need a follow up review !
Wow nicely done bro
Thanks bro means a lot!
Suka cara U buat kerja....kemas👍🏼👍🏼
Tq tuan 🙏
auto subscribe for this incredible poject
Very2 cun!!!! Apa kata buatkan aq skali🤣🤣 teringin ooo cmni
Hahaha bos area mana
You made taking apart your headlight look so incredibly easy...im scared to do mine myself
It's not easy bro haha. It took me 2hours to open without much damage like this.
But now I just put the lights in big box, korek one lobang for heatgun to enter box. Medium heat for 15mins then easily open it.
Less than 20mins can settle one lamp.
But make sure box is big enough cause u don't wanna burn ur lens. Remember to remove all lightbulb and screws too. Total 10screws, 4 to hold the chrome eyebrow , 6 to hold the lens on the housing
I am impress cool stuff dude
Thanks bro means a lot
Padu gilaa bossku 🔥🤘
Tq boss 🙏🙏
Hey bro, what's about that led strip on your headlight when you turn on?? .. I love it!
I love it
excellent tutorial, well explained. INteresting to see heat gun doing the job. Do you just heat and pull one spot at a time or all around until its all coming loose?
Thanks sir. Heat all around then focus on an area and pull that area. Do bit by bit. Then heat all around again. This method is more difficult because the butyl rubber cools down and hardens very easily.
I later discovered it is easier to get a huge box (one that can fit in about three of the entire lamp),
Dig a hole on one end of the box, put the lamp onto the other end, then insert heatgun into the box, medium heat, for bout 15-20mins.
Remember to cover up the box with a towel, use a piece of wood to elevate the lamp, and face the lens of the lamp away from heat source. Start with low heat/ intervals and work your way up cause excess heat may burn the lamp!
hi bro can u teach us how to adjust the led light position for this saga looks in a good position without disturb other road user, recently i install the led light but when i used on road the right light is down a bit and the left light look too high, is it has a some feet of distance from wall to adjust it mpore precisely?
do you do interior ambient lights to your persona?
I'm gonna retrofit my GM6 City as well.. But, I'm using Hella G5 Bixenon 3 inch projector. Since the oem low beam is H11, I need to cut cut 25mm hole to fit them in. And splice the wire from HB3 hibeam to activate to solenoid.
Sounds like an interesting project! All the best and update please!
Hello bro, im planning to do the same, how did it turn out?
want to ask. i want to install drl light on persona 2021 but how to connect the drl signal wire to the persona signal lamp ? i mean there is no signal lamp wire for me to detach to connect ? pls advice. thanks
i also install the same halo, it's so bright ..
Awesome 👍, where you get there projector lens ? Is it for lefthand driver ?
hows ur bi led projector? still working good? thinking modified my own persona
Good job brooo
Thanks alot man appreciate it!
Padu bro..mantap.nak jugak,😆
Tq bos. Selamat mencuba hehe
bro what size of projector and brand im going to buy for my vios 2020 H11 socket size of bulb.?and then i want also to install that halo ring..please give me an advice..thank you..
What are the slim lights on the top between the hood and the housing?
Hi bro... Can you share how you install the wire..
Demmm nice laaa walaweiii..
Thanks bro!
@@projectgostan1773 bro xdea project baru ke untuk persona ni..love to see your car laa bro.
I hope you included the wiring procedure.. im looking to DIY the same bi-led projector. But im quite worried about messing up the wires. I might end up burning it. Haha.
Tbh the lamp only got 3 wires. just high beam low beam and ground.
Just connect the wires to your high beam, low beam and any ground of your car.
These wires can usually be found in the fusebox (check manual) or in my case, I connect directly to the group of socket behind my lamp. It's an 8pin socket and has high beam, low beam, signal, t10 position light, drl, and 3 grounds.
And for the halo angel eyes, it's from both ACC in the fusebox, and from room lamp.
Good luck!
Terbaik bro..! So whats next..??
Hi boss just want to ask which size do you use for the hexagon light ? 90 mm/70 mm ?
What about the lights that lining up above it? Which product is it
hi, what happen to the inner light when you turn on your headlights? appreciate if you could PM the whole wiring diagram. Anyhow, awesome DIY project!
Hi there! I am a little confused but I can try to guess what you are asking.
My DRL and angel eyes are powered by both room lamp and ACC.
So once car unlocked, room lamp lights up and drl lights up. After that room lamp is off and when key is on my drl will continue to light.
But room lamp will not on because current flows from high voltage (room lamp) to low voltage (drl) in one direction only.
I think his mean is the hi-beam lamp?
Lit content!
Nice pun intended sir
Do you know any shop that can install this? I find that most shops that are selling this Bi LED Projector, for installation only coats a lot.
Hi bro, what a great video and this inspire me to do it . What do u think about sinolyn product? Need some advise. Looking at Bi built-in led set H4
Thanks bro! Sorry for the late reply. Just do it man. It's tedious at first but u will figure out things as you go!
Sinolyn as far as I know it's abang adik with this Sanvi. But sinolyn is sold at more places!
But I did not know they have bi-led. I could only find bi-xenon for sinolyn. Try comparing the specs, wattage and lumens before making a decision!
Shopee link?
Does the headlamp level still functional ?
Bro do u have a guide to install the led for turn signal and evening light. I cant find which wire to tap.
Turn signal I get directly from the main lamp socket which has 8pin - including signal, hi and lo beam, t10 position light. Cause there is no fuse for turn signal for this car
How do you angle both projector? Parelel to the wall? I dont get that sharp straight line . I got both two beams instead of one like u shown
Normal to get two beams bro.
Only at a certain distance the two Z will merge into one.
Can watch other tutorials how to align car headlamp.
25 feet from the wall parallel.
Bro the bi-xenon projector what is the size ? And where did you purchase the hexagon ring lights? Sick setup man! Hope to see more content like this in the near future! Keep up the great work
Thanks bro!
It's bi-led not bi-xenon tho.
I got the halos from aliexpress but you can find them on shopee too. They are by Sinolyn. I got the 86mm one that fits well with the 2.5" projector.
But one bad thing about them is that they are of CCFL material which is of lower end lah (and older too)
If you can try finding DTM material one. They look acrylic and clear. I didn't buy because I can't find one for 2.5" projector.
Damm! Thanks bro! I’ll try searching out, and once I buy them! I’ll let you know too if I found the DTM material.
Btw, I’m not really sure, If you do this as business, but if you do, I’ll like to be one of your customers 😂 once everything has been purchased ! 👌🏻 Thanks bro!
@@projectgostan1773 Hi bro, I saw your replied about the product material. How to find out whether CCFL or DTM material? I couldn't find any details about this at sinolyn or sanvi product
Is projector allow for modify without jpj kacau?
hi myvi icon 2015 projector using how many inch?
Hello you have The link where y can buy The hexagon ring
hows the performance still working ?
can this headlamp installed in saga vvt？
can pass jpj roadblock? i thought retrofitting is not allowed
Can you tell me d size millimetre halo that you use?
Nice mods there bro. I also used Proton Persona VVT with retrofitted Bi-LED projectors. But I made it at Headlight Retrofit Projector Malaysia (HPRM). Kinda pricy, but well, been using for almost 3 years already. 😂 Planned on doing some more retrofit, by using this Bi-LED from Sanvi and try to fit on both low & high beam 😁😁
Did u cut your reflector? Honestly bro I don't think this budget projector can match bigger projectors that needs drilling on thr reflectors but if your reflectors are still in tact then can try!
You can also black out the chrome on the reflectors if you haven't! It's just so much better than tinting the headlamp imo
Also note that our high beam n low beam are not side by side. Dia serong ke atas sikit.
So kalau buat dua biji mata in my opinion dia jadi macam spider eyes la hahaha. Bole research dan edit gambar dulu bro baru decide nak letak sepasang ke dua pasang.
@@projectgostan1773 HPRM didn't cut my reflector at all bro for the installation. Just PNP but readjustment memang betul² ambil masa la bro. Came in the morning, finished at night. 😂 Plus they also have painted my reflector bowl to black too. You can view and search in FB using the same description they posted on this link I shared.
m.facebook.com/HeadlightsProjectorRetrofitMalaysia/photos/a.1387180114753343/1387180188086669/?type=3
@@AznilAzni ni la tuan diaaa. Yo I looked at your car so many times before I retrofit mine hahaha damn bro.
You already have lg innotek v2 man don't need this sanvi anymore.
I wanted to do also but I think the quote was 1.7 or 1.9k for the projector alone.
Too bad our cars cannot fit edison r2.
@@projectgostan1773 planned to add 1 more on the highbeam laaa. Haha. And yeah, that's my car. Cuba cari supplier for Edison R2 or Gino S1 punya model also, but can't find where. Sebab nak cuba drill reflector instead of normal PnP for the placement. Hehe. Your Sanvi mcm muat² masuk high beam reflector, but need to carefully do the fitment la.
How did you know the projectors would fit in place of your halogen setup? Know modification or drilling was needed?
I just check if anyone out there has replaced the halogen w/ a 2.5inch or 3inch etc.
And this projector goes directly into the original bulb mount. So I just have to check compatibility.
Hope that helps!
But honestly the best way is to measure.
Yo bro abit late but how did you did ur wiring for the hex halo i bought 2 rgb and 2 switch back I'm not good with wiring but can u give me an idea on how to?
Hi there. My halos are just
+12V - to both ACC and room lamp (so that it turns on upon unlocking and stays on after room lamps go off)
ground and
yellow wire to signal
Hey brother, which wire do you connect to get the light on after you unlock the key? Is it ACC?
I did connect to ACC but it doesnt work unless i turn the car ignition on..
Bro! Nicely done that. Im really want to watch more how you make the wiring. And can you tell me how can i buy those projectors headlamp and how much the price? I've click the link already but i cant understand. Did shoppe got same like this one?
Tbh the wiring is just high beam low beam ground. And for accessories from it's ACC in the fusebox, and from room lamp.
Yea unfortunately taobao only has chinese version. Try opening it with a pc browser and google translate. Some of their stuffs are significantly cheaper
Or u can search for Sinolyn Bi Led projector on shopee.
@@projectgostan1773 thank you so much bro! My car using h4 headlamp. Can you teach me how to install the wiring for low beam and hi beam? How much the price in taobao? I saw its rm126 something. Is it true?
@@nizamudinzupilah8805 u can either tap at the main socket of ur headlight housing or tap the wires within the housing.
Yup that's for one piece. So a pair would be around 250. But courier fees would be around 50-60 so it's better to buy bulk.
You need to get the butyl sealant too bro
Hi bro. I need help with 2 problem that i faced after doing the installation.
1) the low beam goes too low. Did my adjustment, yet still low.
2) not bright. Need recommendation.
Thanks bro
Hi bro. It could be:
1) the projector was not mounted properly - did you miss out on any components when mounting? The first time I did this I left out a piece of silicon ring that goes in before screwing in.
2) did u adjust at the car engine bay area, near the headlamp? There are two adjustment places, one for UP DOWN, another LEFT RIGHT. Both accessible with Philips screwdriver. These adjustments will rotate the entire reflector.
U need to turn A LOT for the angle to change abit.
Hope these help.
Hai bro Where you Bye this Sport Light I am using Myvi 2013 can I by the Spot light pm
Hi bro. Aliexpress ada.
Tapi myvi rasanya bole masuk 3inci. Lagi syok
Bro you think wira original headlamp possible tu add the projector?
Bro wiring is just highbeam positive negative and low beam positive negative. Simple only.
U need to worry about size and the mounting type (h7 h11 etc).
Good shit
berpa inci projecter yg di pakai 2.5 inci sma 2.0 inci ka ngam di kereta persona model 2020 ?
if tinted 65 % still can see?
Hey bro, could you mind sharing the Taobao link again? The link expired and I couldn't find it on Taobao by searching Sanvi S8 or 三为S8.
Also, now that it's 2 years since you did this modification, does the LED still work? Because I saw you mentioned the LED are integrated with the projector and if the LED burned then kena buka lagi the housing which is so troublesome 😓😓😓😓
Proton should see this video to inspire on led headlight for new persona facelift 2021
Yo thanks for the kind words bro! But I highly doubt they would give us projectors. LED kalau ada pon probably reflectors like the new myvi and city
how did u make light up when unlocking the car???
Connect room lamp and acc bro
Bro can u do for my jazz 2014?
can you help me how to wiring that or diagram please help
Bro will you do this for other cars as well?
Mine is old persona. Want to do this, but I'm worry that i need to tebuk the casing. And for the wiring, boleh je kan pakai soket h4 and sambung pada lampu?
Actually Saya ada tebuk dekat dust cap utk bagi wire keluar.
Sanvi S8 yg ni ngam dengan H4. Dia ada mounting ring untuk H4, H7.
Cer tengok 4:16 Saya masukkan mounting ring untuk H7.
Tapi Saya rasa persona lama bole guna yg 3inci. Lagi cun bro.
Yg ni 2.5 je
Does the fishing line melt when headlights are turned on for too long (like for hours) ?
Been a year no sign of melting
I'm still rocking the 2015 Iriz and from the manual book it stated that the DRL is LED module. Any idea what it means? I'm planning to change it's colours 'coz it's sort of yellowish-white (4300K or somethin'). Are the new Iriz and Persona models use LED Modules for the DRL or just an LED strip? The old Iriz has sort of a bulb LED.
Hi bro. I'm not sure but I don't think there is a bulb for your drl right. It should be led chips with a driver inside that cover - like us.
If u wanna change colour I think your best bet would be to get an led strip yg siap dengan driver and naked cam ni
shopee.com.my/product/84388441/2703968756?smtt=0.113896583-1614348692.9
Pastu selit dalam drl tu. That's if you find out a way to safely open up, remove the old chips, install new chips and re-seal it la. Abit too much work bro haha
@@projectgostan1773 what is the size of that projector? i’m thinking of changing the stock Iriz projector with a better aftermarket version such as the Koito H11 bi-Xenon.
How did you make when you unlock your car,your light will on??
I connect room lamp bang. Drl n angel eyes saya sambung room lamp Dan ACC. So bila room lamp padam dia terus hidup
projecter 2.5inch？
Hi bro, do you heard about brand rider spark?
How to install signal led? Please help me. Signal lamp socket no wire.
Dekat Lampu ada soket 8pin yg warna hitam Oren.
3 ground, high beam, low beam, t10, signal, drl.
Boleh tap situ. Boleh extend pakai male female pastu tap dekat extension
What size halo do you use?
I don't understand, you sprayed black the reflector bowl of the high beam too? But you ended up only adding a Projector for the low beam. If so, how do your high beams reflect the light source? Or, will you continue to get another Projector for the high beam in the later stage? Take the lampshade off again?
Correct bro. The original high beam will not be functional anymore.
This single projector has both high and low beam. That's why it's called bi. But actually when shift to high beam it only lifts up a piece of metal to allow more lights to pass through.
Can I upah you do it on my Persona too. Since you've done it.. Pleazeeeee
How about leveling, can adjust in this case?
Yes bro. As I am still keeping the reflector so I can still adjust the reflector up down left right in the cars engine bay.
A Philips screwdriver will do the trick sir.
Perluke buka bumper keluarkan headlight?
Terbaik
berapa inci projecter yg di pakai 3.0 inci dan 2.5 inci ke ?
Your purchase link has expired, do you have a link on Amazon or ebay?
How about the high beam? Really intested with Angel eye but wondering how about the high beam because the angel eye only have 1 main light right?
High dan low dah sekalikan boss. Sbb tu namanya Bi-led.
Bi-led has a built in solenoid that opens up the low beam cut off plate when high beam is triggered. When he high beam is not triggered, the plate is in low position.
hey bro can u teach me how to done this by myself
黑色漆是死黑还是亮黑？
is this 70 or 90 mm Halos ?
Bos, untuk high beam mcm mne?
Bro ada open Bangkel ke ?? berminat lah nak pasang sendiri xpandai.. mmm
wow
road block不常被kacao吗？ 😅
Lawa bro. Nak tanya, nanti mahu adjust tinggi rendah lampu macam mana?
Tak affect bro. Just Guna adjuster yg ori. Dalam engine bay bole access bahagian belakang headlamp yg ada label Up Down dan Left right. Bole hulurkan Philips screwdriver ke dalam Dan adjust.