This is a BiLED Projector, and how Mickey Andrade Retrofit them into his 1993 Sazuki Cappuccino Headlights. FOLLOW US ON SOCIAL MEDIA IG: / flyryde FB: / flyryde Twitter: / flyryde
Aiming straight will cause you to blind/flash people when you hit a bump in the road, or get any weight in the car, (something in the trunk would cause blinding all the time like the led subaru's do currently). The actual way to aim headlights is 2.1 inches of drop per 25 feet from your original height.
"The actual way to aim headlights is 2.1 inches of drop per 25 feet from your original height." ... LOL! Who told you that? All you have to do is look up... how to aim headlights. And, they did not aim the headlights "straight". Watch the video again and pay attention. Also, what are people putting in the trunk of their Subaru with LEDs that cause them to blind people all of the time? Show us forum threads dedicated to that issue.
BiLeds are the way to go now. Have a local headlamp retrofitter here in Malaysia which they use a BiLed called EDISON R1 and EDISON R2. Those are super bright and wide. Have 3 led chips for a super wide hotspot.
You're right, but where the BiLed can be purchased?. I would like to retrofit myself. I have retrofit my own car but I just can't find Edison sold on line.
Im finally going to finish mine, working on first gen tundra so have lots of room but using an aftermarket 3rd gen tacoma internal bezel and running light, looking great so far and took advantage of black friday sales on some D2S
@@flyrydeFR are you still around.. I have a 2008 Prius... These cars where available in halogen and hid... Is there a projector that can drop in these head lamps? Thank you
Good stuff as always. What’s up with all the spammy comments. The same woman in the profile pic with 3 different names in 3 different comments. Is that how you know you’ve made it in life?
Yup, they’re in my own headlights right now acting as secondary lows and highs 👍 I still need to do some adjusting and hook up a switch to turn them on and off independent from the bigger primary projectors.
What do I have to do to convert the headlights on my 2013 Mercedes S350 W221 for EU traffic? I bought the car in Japan and need to adapt the headlights to EU standards. Is it enough to just replace the reflectors? thanks
First, super bright bulbs in a RHD projector = Bad. Second, we’ll do a side by side comparison eventually, but that 27 year old halogen reflector is not designed for HID, and would no doubt cook off the reflective surface in no time. I want to find a high quality H3 LED bulb for Ricky to see how they compare.
Hi. Is there anyway we check watts of the LED chip in these projectors? I recently found out that some sellers are buying just the projector housing without original LED chip and installing cheap LED and selling as original. Is it true or actually possible?
I am the manufacturer of car lights from china , our main product is LED&Laser projector for car lighting upgrade and also customize the lighting based on your requst. if you are intereted I can send you more infromation about laser projector , I believe our laser projector can sell well.may I have chance to do business with you
Do you think upgrade H3 LED bulbs in Rickys stock RHD Cappuccino Projectors will compare to Mickeys BiLED Retrofit?
Retro fits can do my head in some times.... but when they work and look as good as what you just did it's more than worth the effort !!
Aiming straight will cause you to blind/flash people when you hit a bump in the road, or get any weight in the car, (something in the trunk would cause blinding all the time like the led subaru's do currently). The actual way to aim headlights is 2.1 inches of drop per 25 feet from your original height.
THANK YOU!!!! now i dont have to write it... now if only it could fixed in the video
Fern is correct, and his info should be pinned at the top. How does a "high end" shop not know how to align headlights like OEM?
"The actual way to aim headlights is 2.1 inches of drop per 25 feet from your original height." ... LOL! Who told you that? All you have to do is look up... how to aim headlights. And, they did not aim the headlights "straight". Watch the video again and pay attention. Also, what are people putting in the trunk of their Subaru with LEDs that cause them to blind people all of the time? Show us forum threads dedicated to that issue.
I owe you nothing, as you provided nothing to the conversation@@netzoned
BiLeds are the way to go now. Have a local headlamp retrofitter here in Malaysia which they use a BiLed called EDISON R1 and EDISON R2. Those are super bright and wide. Have 3 led chips for a super wide hotspot.
You're right, but where the BiLed can be purchased?. I would like to retrofit myself. I have retrofit my own car but I just can't find Edison sold on line.
Do they come in 2.5 inch sizes?
@@johankamarudin5155buy them from aliexpress
I’m learning!! Thanks for sharing.
Im finally going to finish mine, working on first gen tundra so have lots of room but using an aftermarket 3rd gen tacoma internal bezel and running light, looking great so far and took advantage of black friday sales on some D2S
i am about to do this to my headlights.thanks chris for the headsup
What car is that again dude?
@@flyrydeFR are you still around.. I have a 2008 Prius... These cars where available in halogen and hid... Is there a projector that can drop in these head lamps?
Thank you
What would you recommend to replace a bixenon BMW projector I wanna replace mine to Bi Led projectors.
That G-Van 🤩🤩😍😍😍
Good stuff as always. What’s up with all the spammy comments. The same woman in the profile pic with 3 different names in 3 different comments. Is that how you know you’ve made it in life?
That’s actually my alter ego stepping in to push this little Chris pansy into success. 👹multiple personalities bro 👌😂😂
I booted her (them?)
I have some I would like to show you that I installed yesterday
You did a retrofit you mean? What car dude?
You suppose to be 25 ft away from wall when adjusting height 👍
👌
You should review the LK3 BiLed Laser projectors
Dude I hope this one is going to be added to the retrofit course🤔
Yeah man, but it’s gonna be like 2 hours long, unedited 👍
@@flyryde hh
Have you ever tried the cheaper bi-led projector so far? I'm thinking to use some in a cheap headlight build
Yup, they’re in my own headlights right now acting as secondary lows and highs 👍 I still need to do some adjusting and hook up a switch to turn them on and off independent from the bigger primary projectors.
Well done 👏👍👋
What do I have to do to convert the headlights on my 2013 Mercedes S350 W221 for EU traffic? I bought the car in Japan and need to adapt the headlights to EU standards. Is it enough to just replace the reflectors? thanks
How do you wire the high beam switch while low beam is still on please?
Who do you have there on 7:53 ?Jetfire, Omega Supreme and Dirge?
2/3 👍 Thundercracker
i didnt catch the model thats being fitted (the bigger ones), whats the name again?
Retrofit all things bro lol
Time to try MLED2
were can i send my headlight i haVE COROLLA 2015 NEED SOME MODS
Couldn't Mickey just have changed the bulb in the projector an gone a white led or Hid since he said the yellow lights were not good visibility?
First, super bright bulbs in a RHD projector = Bad. Second, we’ll do a side by side comparison eventually, but that 27 year old halogen reflector is not designed for HID, and would no doubt cook off the reflective surface in no time. I want to find a high quality H3 LED bulb for Ricky to see how they compare.
What brand of headlights are they?
Where i can buy a ghozt module?
Hi. Is there anyway we check watts of the LED chip in these projectors? I recently found out that some sellers are buying just the projector housing without original LED chip and installing cheap LED and selling as original. Is it true or actually possible?
Just buy from a reputable seller, avoid Amazon unless the seller has a VERY good reputation
Headlight Junkies FTW 🦾
Would u kindly link the BiLED projector supplier/maker and how much does it cost
The projector I’ll be trying out next is the MLED 2.0 from Morimoto. Google that 👌
@@flyryde appreciate it ❤
Cool one
I thought Mickey was the name of the car like Mickey Mouse😂😂😂😂
U shlda slapped in some halo rings in there to have some heavenly😇 cappuccino 🤪
I was gonna retrofit to bi led but if the led goes out that will hard to replace for basic person and most likely put a smart HID on my headlight
Definitely not something for 99 out of 100 people to do.
A least i woul get something around $300 led and up so it can last forever
like Savin laser bi led
Throtl ftw!
Smoke-a-lot???? Dang dude
Not at all these days
👌
I am the manufacturer of car lights from china , our main product is LED&Laser projector for car lighting upgrade and also customize the lighting based on your requst. if you are intereted I can send you more infromation about laser projector , I believe our laser projector can sell well.may I have chance to do business with you
for less evenly dense rays, you can upgrade BiLed to make it more dense and even,
ruclips.net/video/wrI0jnC84_U/видео.html
the highbeam sucks
Damn, yer cute. Rrrrrrrr