just wanted to say thanx! i got a bike yesterday with the same display but a different brand ( B'twin) the setting to increase the speed was password protected for me.so for others who stumble upon this video here is a quick tutorial: once i was in the default menu ( where you set the clock etc) you need to press +/- and hold them down. while holding them down you need to press the power button 8 times. the display will then prompt for a password. it should be 0512. once entered you get 2 options: change the size of your wheels and LSPD. i set mine to 45Km/h and while driving it averages at 35km/h. really happy with that and i wouldn't have figured it out without this video in the first place!
Level 3 pedal assist is pretty good on a 36v 12ah green cell battery with a 250w bafang motor, but I'm wondering how quickly will jacking up to level 9 pedal assist drain battery, as opposed to level 3 and what is the speed difference like?
*Hello! I have a front wheel Bafang 500 watts 48 volts.I am powered by a 48 volt battery. My display is not working. When buying a c 965, it worked. In an accident, I broke it and bought a c 850. He doesn't see the battery and the speed. Right now I bought c 961, he writes error 7b. The error code is incorrect voltage..The controller is 22 amps. Please tell me what could be the problem here? How do I solve it? Thanks!*
Another question, if you set your speed limit higher, like changing it from 16mph to 32mph, does that mean pedal assist will assist you up to 32mph instead of 16 mph and will this drain your battery quicker?
Manual of my e-bike: level 1=20% up to 9=100% The power level (my e-bike) controls pedal assist, not throttle. I can use full power at any level with throttle, pushing it more or less. I can combine pedal with throttle, or use each at a time. Trying best match with 7-speed gearbox and save battery. Not easy but funny, always learning and improving. I am 58 and this is the best thing I bought ever. No car no more. best from sao paulo, brazil joao
Nobody explains what the assist modes do. My controller defaulted to 3 levels, if I set it to the maximum does it just provide more finer control or does it provide more assistance?
If you are on mode 1 you get 10% pedal assist power, 10% throttle power. If you are on pedal assist 9 you get 100% throttle 100% pedal assist power. However if you set it so there is only 3 pedal assist modes, then assist #3 will be 100% power. If you have 5 pedal assist modes 5 will be 100% power.
Manual of my e-bike: level 1=20% up to 9=100% The power level (my e-bike) controls pedal assist, not throttle. Full power at any level with throttle, pushing it more or less. So I can combine pedal with throttle, or use each at a time. Trying best match with 7-speed gearbox. Not easy but funny, always learning and improving. I am 58 and this is the best thing I bought ever. No car no more. my best from Sao Paulo, Brazil. joao
@@joaogamboa7653 The power level controls pedal assist and Throttle. The power (throttle or assist) will cap at the assist level. See Desvio2000 answer above. He is correct.
@@MyDandilion Hi Shirley, sorry, I didn't say Desvio2000 was wrong. I just tried to explain how my bike works. As mentioned earlier, my bike has a throttle (thumb) that speeds up regardless of the level set for pedal assist. Even if I set level 1, 3 or 8, I get full power just pushing the throttle. Apologies for my English, I am a Portuguese native speaker. Regards, Joao.
Hi. Niceyoutube channel. Please show how to set the brake sensors to cut off the motor on the C961 display, I'm using an aftermarket brake kit for hydraulic brakes. Thanks. Joe
just wanted to say thanx! i got a bike yesterday with the same display but a different brand ( B'twin) the setting to increase the speed was password protected for me.so for others who stumble upon this video here is a quick tutorial: once i was in the default menu ( where you set the clock etc) you need to press +/- and hold them down. while holding them down you need to press the power button 8 times. the display will then prompt for a password. it should be 0512. once entered you get 2 options: change the size of your wheels and LSPD. i set mine to 45Km/h and while driving it averages at 35km/h. really happy with that and i wouldn't have figured it out without this video in the first place!
Simple and to the point, thanks!!!!!
Straight to the point, good video mate.
Great info. Thank you
Excellent tutorial. Thanks
Thanks,iv noticed if you hold power and plus together you get a p levels come up. Think might be power.
Thanks a lot: this was very useful to me!
My speed limit is locked but i don't know how to unlock it
Thank you a lot! I just got my new ebike (onway fat tire 750W ebike) and this helped me so much! Thanks :)
Is the 700c the tire size, and is there a way to check the battery voltage on the display.
Level 3 pedal assist is pretty good on a 36v 12ah green cell battery with a 250w bafang motor, but I'm wondering how quickly will jacking up to level 9 pedal assist drain battery, as opposed to level 3 and what is the speed difference like?
I can’t change the speed. I think the fabric locked it in the Netherlands. Do you know how I can still change the speed??
Can you set different speed limit for different profiles so you can switch from one to another while you are driving? Thanks
Legend thank you
Very helpful thank you
*Hello! I have a front wheel Bafang 500 watts 48 volts.I am powered by a 48 volt battery. My display is not working. When buying a c 965, it worked. In an accident, I broke it and bought a c 850. He doesn't see the battery and the speed. Right now I bought c 961, he writes error 7b. The error code is incorrect voltage..The controller is 22 amps. Please tell me what could be the problem here? How do I solve it? Thanks!*
Another question, if you set your speed limit higher, like changing it from 16mph to 32mph, does that mean pedal assist will assist you up to 32mph instead of 16 mph and will this drain your battery quicker?
Super helpful thanks
your welcome!
Manual of my e-bike: level 1=20% up to 9=100%
The power level (my e-bike) controls pedal assist, not throttle. I can use full power at any level with throttle, pushing it more or less.
I can combine pedal with throttle, or use each at a time. Trying best match with 7-speed gearbox and save battery.
Not easy but funny, always learning and improving.
I am 58 and this is the best thing I bought ever. No car no more.
best from sao paulo, brazil
joao
What does control the throttle is the maximum speed that you set in the advanced settings.
*Hello! TSU me display writes error 7b and turns itself off. What should I do, how can I fix it?*
My offtime setting doesnt seem to work,everything else works
Bit weird Id say
Tried changing from like 3-5minutes,it stays on anyway
Mine is saying er 30 any idea why?
Nobody explains what the assist modes do. My controller defaulted to 3 levels, if I set it to the maximum does it just provide more finer control or does it provide more assistance?
If you are on mode 1 you get 10% pedal assist power, 10% throttle power. If you are on pedal assist 9 you get 100% throttle 100% pedal assist power. However if you set it so there is only 3 pedal assist modes, then assist #3 will be 100% power. If you have 5 pedal assist modes 5 will be 100% power.
So 100% can be spread over 9 levels? I been riding mine for 3 weeks, never knew ahaha
Manual of my e-bike: level 1=20% up to 9=100%
The power level (my e-bike) controls pedal assist, not throttle. Full power at any level with throttle, pushing it more or less.
So I can combine pedal with throttle, or use each at a time. Trying best match with 7-speed gearbox. Not easy but funny, always learning and improving.
I am 58 and this is the best thing I bought ever. No car no more.
my best from Sao Paulo, Brazil.
joao
@@joaogamboa7653 The power level controls pedal assist and Throttle. The power (throttle or assist) will cap at the assist level. See Desvio2000 answer above. He is correct.
@@MyDandilion Hi Shirley, sorry, I didn't say Desvio2000 was wrong. I just tried to explain how my bike works. As mentioned earlier, my bike has a throttle (thumb) that speeds up regardless of the level set for pedal assist. Even if I set level 1, 3 or 8, I get full power just pushing the throttle. Apologies for my English, I am a Portuguese native speaker. Regards, Joao.
Does anybody know how to reset the speedometer? Mine is reading out that I'm traveling much faster than I really am.
How do you turn on the headlight
Same way that you turn on the display light (ie press and hold the + button for a second or so).
I want have 3 seconds delay for assist to kick in? So the gear change will settle
Do you have a gear sensor? I wish there was a little more delay so I could get seated. LOL
How do you turn on the front headlight?
Press and hold the + button turns on the lights and the display backlight ;-)
the reason your clock goes out of whack, it's because the CR2032 button battery in the back of the display is empty :-p
Hi. Niceyoutube channel. Please show how to set the brake sensors to cut off the motor on the C961 display, I'm using an aftermarket brake kit for hydraulic brakes. Thanks. Joe
if we get some in stock we will definitely do that!