MAKE THESE MAGNETIC PADDLE SHIFTERS DIY SIM RACING
HTML-код
- Опубликовано: 6 сен 2024
- DIY Sim racing 3d printed magnetic shift paddles can be added to a custom wheel or upgrade to your sim racing wheel. These paddles would work great on an OSW or custom DIY F1, GT wheel.
-- Free download 3D Shifter files -----
amstudioprojec...
Parts per Paddle Shifter
6x M3 Nuts ebay.us/S5tnyu
2x M3 Cap socket screws 10mm ebay.us/SUFQW9
5x M3 Cap socket screws 30mm ebay.us/SUFQW9
2x Neodymium magnets 8x5mm ebay.us/lm7RxK
1x Micro lever switch kw-10 ebay.us/n5Z6pn
Wire bit.ly/2J6PkgM
Hot glue bit.ly/3QdbptT
Superglue ebay.us/hEYjCv
Solder bit.ly/2MK4Tuy
Soldering Iron ebay.us/VIwU6k
This site contains affiliate links for which I may be compensated
Total cost breakdown of parts for the completed build seen in the video per assembled paddle shifter is $2.50 USD
Print settings printed on the Cocoon Create Touch
PLA - Black
Layer height 0.2mm
Infill - 50%
Thank you for watching, all questions and feedback are welcome.
If you know someone interested in this project please share the video with them.
Check here for other SIM Projects, Mods and DIY
/ @amstudioprojects
|Shifter design Credit to JKOLJO|
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
creativecommon...
Copyright
© AMSTUDIO 2018 All rights reserved | amstudioprojec...
![You can also make Dry Carbon Fiber Shifter Paddles. with Magnetic Shifter [DIY]](http://i.ytimg.com/vi/cYkajssubvA/mqdefault.jpg)
![You can also make Dry Carbon Fiber Shifter Paddles. with Magnetic Shifter [DIY]](/img/tr.png)
I'd love to see if you could make a full sim racing setup. (wheel, pedals, paddle shifters, gear stick, etc.)
I don't think the wheel would have FFB though
Creepyslacker boy I’ve seen someone do a DIY FFB wheel but it did look pretty tricky. What I’d love to see would be a budget/beginner wheel and pedal set without 3D printing or soldering. That would be a challenge, but really interesting to watch.
@@zrspangle it probably will but it will be hard to make it
@@matijamodric1435 good force feedback systems these days run on the same motors they use to power conveyor belts, it wouldn't be cheap or easy to do without the right supplier
@@zrspangle in 2024 you can make a Direct drive wheel with less than 200 dollars using FFbeast + hoverboard motor.
This seems to be some great shifters! Planning to get a 3d printer in the near future and design my own steering wheel button box and probably integrate these into the build.
I could watch him clicking it all day, that sound is so satisfying
Plz make a video to make a sequential shifter with magnet, the feel are soo good
use this shifter now over a year and they work still like a charm!!! printed also a custom holder plate behind the wheel to mount them on a after market rim ;-)
For what wheel?
I watch your vids but I don't even have a steering wheel
Well you don't need a steering wheel for minecraft
Jose Raphael Martinez same man
Same im buying a logitech g920 this weekend to do diys
99 of em don't have lol
@@Ady_Mih techno lade used one. R.I.P.
you are the best
Best DIY paddles, using a remixed version for my Logitech. Make sure to print them 100% if you do lots of hard downshifting as the paddles tend to break if printed in PLA
Very cool. I found this while looking for a way to mod the feel of the shifters on my g29. Looks like I'm going to have to innovate myself though
4 years later did you find anything?
@@maxfn75 played around with a few ideas but didn't really come up with anything good
@@DoRC ah ok was just wondering if y out made these and managed to fit them
For a sec, from your thumbnail, I was like "dayum!" thinking you were set to make sim pedals with realistic brake pads.
You can probably make the switch fully magnetic by using a reed switch tube instead of the microswitch. Reed switch is a small vacuumed glass container with two metal leafs that touch and close the contact when you put a magnet nearby. These things are quite cheap and more reliable than microswitches. They produce a faint click when the switch is actuated, so you can use that sound while placing the switch to ensure actuation. The next step from there, and probably fairly excessive, is the Hall effect switch, by using a Hall sensor IC and connecting it to ADC channel of a microcontroller or to a comparator circuit. The threshold will need to be calibrated.
Also i wonder, is it possible to self-build an FFB system under $100? Using like a $30 sports steering wheel? I already have a 3D printer. I also have a bunch of STM32F103C8T6 USB microcontroller boards, potentiometers, switches, all these kinds of gear. The microcontrollers have 12-bit 10-channel ADC, so they seem perfectly suited to capture a lot of steering angle, but maybe optical encoder is the way to go on this - i don't know! How would you approach this? It doesn't necessarily have to be good, or better than commercial offerings, just like my $150 printer isn't good, but it has to be a decent starting point for further improvements. I tend to believe in self-building things rather than buying them when possible because it's a path to self-improvement and you can always fix it when it breaks and improve on it.
About the Hall effect sensors, I know that the crazy-expensive Cube controls wheels (upwards of 1K for some wheel rims!), Hall effect sensors are used on clutch and shift paddles.
You really are the best. Your videos got me into the DIY world! I can't thank you enough for this!
thanks for this design i just finish printing and assembling mine and they have a super high quality feel
Would you be able to make a video of inverting the pedals on the G29? i would love to see it!
Hurtle its the same as the other video he did about reverse mounting pedals
the same as a g27, there are lots of vids on youtube
I wonder how hard it would be to make some turn signals for like Euro Truck Simulator 2
Alexander Paschke thats a good idea
Alexander Paschke I know this is an old comment, but you can retrofit a turn signal switch from a vehicle. Just use each signal wire from the switch as the respective keykinds in your game
Adam Major he has a video on it now
Bro, as always, perfect, i love how your projects are always so... "perfectly calculated", if u will, haha!!
Please make clutch paddles with hall sensors! I’m not good with cad programs yet, and its taking forever lol
Switch those caphead screws with button top and an aluminum special washer to spruce it up.
Excellent video. Hope to see a WRC single push pull paddle in future. Keep up the great work.
Hi, once we have the paddle completely finished, how can we use it? With an arduino? And how can i conect it?
Great shifters, thx dude.
amstudio, it's possible to replace mechanical switch with reed switch or Hall sensor to make it more reliable. Optionally, spring with press screw can be added to have adjusting force.
can you make a video of connecting these ?
he has type in diy f1 rim. He shows you how to connect it to a Arcade usb controller. It's so simple
Egglezo
Can you make a in depth parts list or tutorial on the handbrake and drilling template (not the analog one) Thanks
Nice work definitely making this for my DIY Mercedes AMG GT3 wheel:)
Awesome bro, you made everything, but please make steering wheel
for the diy crowd peace love this
Is there a way anyone to make a logitech wheel retract to its normal spot when you let go of it? If anyone has an answer, please reply
For any Aussies that want to make this, you can get a pack of 8x3mm magnets from Bunnings for $7 that work perfectly
Thanks for the video. How does the entire assembly get attached to the steering wheel?
In the shifter folder download, there is only the f1 paddles and there are no longer the gt ones (longer ones)
The GT style paddles are missing bro in the zip file, bro. Cheers
As allways.....great product in great video.
any tutorials to make WRC-style paddle shift?
Finally you spoke !
Ugh, the click is so satisfying!
Do you also have those Push-pull paddle shifter for Rally?
Is in the programm a review of the fanatec setup?
Leo bodnar is crying soooo bad right know
But Leo's work is second to none, and the price is reasonable considering the competition.
I have built a few of Amstudio stuff amdnit is amazing but by no means is it long lasting in regards to electronics. but Leo's work will last many years.
Outstanding, keep them coming.
Can i put a potentiometer on it and make it an axis?
Can you do motion platform??
Please~~
This is fantastic! Thank you so much for this video
HI how do you connect the wires to the controller board? Is it black red, black red for two shifters or black red, red black?
My left shifter is not working, while my right is and I see the pattern black red, red black soldered in
I know this is an old video but i was wondering if you tried using any other materiasl besides pla? I printed a set of shifters based off fanatec advance paddle module, and while they work great, they feel cheap and flimsly with a lot of flex. I was wondering if using something like CF-Nylon would stiffened them and make them feel more premium.
Very Awesome! Thanks for sharing!!!!!!
This is great stuff! Thanks for sharing!
What size should each compartment be? 0.1 m? 0.01m?
I would have mounted the switch on the opposite side using the NC pin insteaf of the NO pin, it would make it more flush with the wheel after mounting
Can you make a version of this as a replacement for the G27 paddles?
Good idea, I will look into it!
@armstudio - Did you ever get around to this? I'd love magnetic shifters for my G29. Just not sure if there is enough room for them :/
thank you sir
Excellent Vid, haha and yes My Bodnar should be concerned haha - i am wondering if you may be able to point me into a direction that i could make something close to this, but using analog inputs - as i am a wheelchair racer, i would like to create a set of paddles for accelerator and brake, as well as gear shifters - could i just replace the magnetic inputs with an analog input? would appreciate knowing how, as i would defiantly create one for myself, and then adapt that to many wheels - cheers, and keep up the great video's - subbed
Magnets should be atrracting or repeling? Thanks
Great video describing the paddle shifter assembly. I do have a question about the nut-tab off the side you are holding at 3:25 in the video. Is that for a stop screw that limits how far the paddle moves into the micro-switch? Does this prevent bottoming out the switch during operation? Let me know when you get a chance. Thanks Again! Wayne (Clifton, NJ)
hey there, it does look like it limits how far the paddle moves but doesnt use a stop screw to do so.
Nice video, but it is not what I'm looking for. What about a paddle shifter "rally style", which works like a sequential shifter (you can press it in both direction)
Actually I never see a shifter like this for a sim rig, so it would be a nice "exclusive" ;)
Great job, well done
what do you think about a hall effect swtich version? in the end you are moving magnets you would need to adjust the threshold and nearly eternal operation.
Hello, how is the reliability of the switches that you used compared to Logitech paddle switches? Mine just started failing, so I am thinking to replace them with your paddles. The original Logitech switches have a minimum 1000000 of usages.
Hi did you ever manage to replace your shifters with these?
@@maxfn75 Hello, yes I am using them since last year when I wrote. They are great, the only problem I had was the quality of the printed parts, I had to print them with 100% infill for them not to break, also the magnets I use are so strong that I need to super glue them, but so far so good no complaints from my side.
Loving the vids:) , but now a question, do you have a rough idea of how I could make a rally style SQ shifter used in the current spec rally-cars? So one paddle being used for up and down shifting .
@amstudio What about a Rally Push Pull Paddle Shifter??
Sequential shifter.
@@architecteye6089 yeah but the one they use in WRC with the big Paddle.
Hello @amstudio missing GT Paddle not found, im downloaded zip but have only F1 paddle.
So we have had shifter pedals. When are the hand clutches coming? Would really like to see that. I already have a diy formula rim with these pedals but i want some hand clutches too. But i have no idea how to make them
Any chance you could create a static paddles mod? Seems really easy since there’s a dedicated place for wire to pass through the centre of a g29/g920 wheel
With your expertise it be real quick as well
Can you design a WRC style, one paddle shifter? I haven't seen a wheel with that one anywhere.
@amstudio How much is the thickness of the device?
For 3D printing, Do I need to learn both Autocad and Fusion360? Or just fusion360 will be enough?
I don't have a 3D printer 😭 looks good will have to find someone with one😊
Hillsy check 3dhubs.com. You can find someone local to you who will print them
JPM398 thank you should be able to do this now thank you
Hey, can you please make a video how you make a key switch.
Thanks im going to use this on my merc e320
thank you so much!!!
Are these the same bolt pattern as the Ascher racing paddles? I'm trying to get nicer magnetic shifters than the ones I built but i don't know what other ones will fit my button box
in having trouble with the shifters on a school project. When i import the bottom bracket file, i found that it was too big. did you have to resize it at all?
add a 3rd magnet for pushing!
What kind of pilament do you use?
PLA
Hey man great video have you maybe made up some shifters for deep dish wheel like this ??
Can you make this video private please?
-Leo Bodnar Electronics
hahahahha
are you F**king kidding?!?
:P
why
lol
You should make a wheel-mounted clutch that way!
how how to make a racing wheel out of a controller?
Would there be a way for me to replace the shifters on a Logitech g920 with these as my shifters are broken?
Did you ever find any way how to replace the shifters?
Can you make a Logitech DIY clutch paddles mod? I would really like to have these
Great video!!!! Can you put the stl files on the description????
Can you do video on how to make handbrake using ps2 joystick module and arduino uno?
Nice :) more vids more diy pls
very cool!!
Hello! Can I print parts whit the 3d shifter files? TY!
bloody good!
amstudio I have looked on the 3d files page and there seems to missing part. The file for the shifter levers are not there. please help as I'm just waiting to print those out. Cheers and thanks in advance
Hi, I want to ask if programming is needed to make this work, e.g. with an audrino? Sorry if I sound like an idiot
What are the demintions of the mounting holes?
does this work with any wheel. ive a tmx wheel but have a different rim on it but i want paddles back?
Can you in any way use these on a Logitech G29?
when using a file you want to go over what you want to file not along it. pulling a file sideways will not work
It does, it's called draw filing and is very effective for smoothing surfaces.
where to buy
switch holder
top light
lever and etc and the paddles
Legend !!!!
is ther any way to get this parts ready printed ?... i don´t own a 3d printer
could I adjust them to be static?
Can i put it onto Arduino steering?
could this work for a g29?
Can i buy this magnetic peddel shifter
Great