How to Upgrade your Steering Wheel like a GT Race Car with Carbon Fiber Magnetic Paddle Shifter[DIY]
HTML-код
- Опубликовано: 18 мар 2021
- #CarbonFiber #PaddleShifter #3DPrinter
How to Upgrade your Steering Wheel like a GT Race Car with Carbon Fiber Magnetic Paddle Shifter. [DIY]
Making Carbon Fiber Shifter Paddles.
How to make split molds with 3D Printer.
Making split molds with 3D Printer.
당신의 스티어링 휠을 GT 레이스카 처럼 업그레이드하는 방법 with 카본 마그네틱 패들 쉬프터 [DIY]
카본 패들 쉬프터 만들기
3D 프린터를 이용한 분할 몰드 만들기 
Авто/Мото
![You can also make Dry Carbon Fiber Shifter Paddles. with Magnetic Shifter [DIY]](http://i.ytimg.com/vi/cYkajssubvA/mqdefault.jpg)
![You can also make Dry Carbon Fiber Shifter Paddles. with Magnetic Shifter [DIY]](/img/tr.png)
![How to Bake Prepreg Carbon Fiber Brake Cooling Ducts in an Oven [DIY]](http://i.ytimg.com/vi/d3SY8l3jbTo/mqdefault.jpg)
![How to Make a Race Car Steering Wheel with Prepreg Carbon Fiber [DIY]](http://i.ytimg.com/vi/bDFs_Wr7vZo/mqdefault.jpg)
![DO NOT MAKE CARBON FIBER PARTS AT HOME (Making Charge Pipes) [DIY] with CR-Scan Lizard](/img/1.gif)
* Model Files & Schematic *
drive.google.com/drive/folders/1lKpg9xPoNj89p-sfUlwO571KZM2XWEGz?usp=sharing
you also sell these
Do you do commissions? I'd love a set of those magnetic-switch paddle shifters, although would definitely like a bigger Ferrari sized paddle 😀
Thanks for that
thanks for the files but are they for all cars or just for the M4? other question i saw you have a creality 3D for optimal 3D printing what should I use, a good graphics card or a good 3D printer? hello and thanks I follow you
@@Samuele.Deganello
I. mm Z YFFFZ
Those clicks must be so satisfying. Let's get a video of all mods you have done to your M4.
At some point he's gonna start cloning entire panels in CF...mark my words.
These videos are so fucking funny, I like how this guy never talk and use his bear towel all the time, great vid & nice job! :)
Nice result!
If you want to make your life easier next project, you actually don’t need a split mold (2pc). If you take one half of the mold and pull a vacuum on it, the pressure from the atmosphere does a really good job forcing the laminate into the shape of the mold.
killing it keep the vids coming
Tamsak host, nice sharing this informative & interesting video. Keep it up!
오늘도 영상 잘봤습니다~
Great work with the video editing, You really go through the up and downs of building the paddle shifters, and as always some good comedy 👏👏
really nice job as always also you are so smart on designing your mold like that until you did cut the part i didn't understand how your mold gonna work, seriously nicely done
I love the way your production. Both videos and carbon fiber =)
Even though I don't like the new paddle shape, I love they make a clicking sound.
Awesome! Very talented. 👍
덕분에 아이디어 얻어서 다른 차량이지만 제품을 만들어봐네용~^^ 실착감이 완전 좋습니다~^^
지리고갑니다 ! 배우고싶른기술이네요
Neatly build paddle shifter. I love the humor scenes, not much but enough.
Hi, awesome video, I’ve been thinking of making my own paddles for my GTI. I had a pretty good idea of the steps but your video made it all more clear. Have you thought of making carbon fiber mirror caps and showing how? I don’t understand how you would go about making the inner clips without injection moulding. I would love to see this as would many other people I think!!
Always love the ending
엄청난 능력자이시내요 항상 잘보고 있습니다
한글찾기가 힘들줄이야 ㅋㅋ
이러다 자동차 휀다 후드 트렁크까지 카본 경량 커스텀하시겠네요.. 엄청난 퀄리티입니다.
진정한 신의손...
탐나는 물건이로군요..덕분에 좋은 정보 물고갑니다...
Darn mate that´s cool!
Always top 💪🏻
구독 좋아요~구경 잘하고 갑니다~
Amazing 👏🏻👏🏻
그렇다 그는 마법사였다 ㅋ 항상 잘 보고 있습니다ㅋ
다음은 에어덕트인가... 역시 능력자...
👍🏻 ottimo lavoro e bellissimo tutorial
멋지네요 항상 잘봅니다.
another awesome DIY, good job my man
Now show me hour hand vacuum
Pump setup :D please
Отличная работа. Молодец
วิลแชร์คาร์บอนผมแตก ท่านคุณสามารถซ่อมให้ผมได้ไหมครับ
Very nice work, currently today I also made a mold for embossing leather and carbon I would also try to shape like this.
By the way where is the carbon fiber steering wheel? 😅 Don't you plan to continue?
금손인정 👍
Epoxy Gelcoat랑 Resin&Hardener 제품은 어떤걸 쓰시나요? 구입경로 부탁드려도 될까요?
This is AWESOME!!! is it possible for you to supply me a set of the PCB's you made up? it just makes it so much more professional
에셔로 이걸 해내시는군요 ㅋㅋㅋㅋ
이번편은 PCB도 제작하셨군요ㄷㄷ
You have influenced me to start doing this man!
Aye can you reach out to me I need some tips on reusing heated element
Cool, i like it
Good video
Great video and very clever indeed.👍
Hi great video, I have a question. The bottom tray file from your link has no paddles inside the tray part. They are seperate?
In your video they look like they are connected to the bottom tray? Is the file wrong or do you just place them on the tray?
Great job, we all learn through our struggles
I want to see more, I love it :))
대박.....
Finally !!!
Very nice work!!!!!
素晴らしいスキルですね♪
私も日本でM4に乗ってます！
ありがとうございます。^^
Nice :o
I'm doing this to my A90 Supra this week, do I have to do the resistors?
Отлично)
Very nice
I love your channel 😍 and... I need this paddles for my m2cs
Hi, how did you determine the amount of resistance to use and where to place the resistors in the schematic? I'd like to try something similar but I'm not sure how to start with the electrical part
카본성형일을 하고 있는 사람으로써 그동안 영상이 많은 도움이되고 있습니다. !! 3d프린터로 몰드 출력후에 제품면에 빼빠질 말고 랩핑지로 씌우시면 조금더 깨끗한 제품면이 나올꺼같습니다! 다음에 인퓨젼하는영상도 올려주시면 감사하겠습니다
안녕하세요.
랩핑지 생각은 전혀 못 해봤는데 좋은 아이디어 감사합니다.
다음에 적용할 수 있다면 도전해보겠습니다.
인퓨젼은 저는 아직 아마추어이기에 해본 적은 없습니다.
당연히 도전해보고 싶은 작업이지만... 인퓨젼 작업을 한다는게 더 이상은 DIY가 아닌 것 같다는 생각이 들어서 미루고 있는 상황입니다.
이해해 주시기 바랍니다.^^
와 지린다... 똑똑한 사람들은 저렇게 만드는구나... 나 같은 평범한 사람들은 알리에서 싸게 만들어줘야 구입할까 말까 하는데 ㄷ ㄷ ㄷ
I bet one day he’ll make his car chassis out of carbon fiber one day
ㅎㅎ 혹시 스팅어차량도 가공해서 만들수 있을까요?….. ㅠㅜ
Make a carbon fiber house 👍 this dude makes everything from carbon fiber
Now I'm waiting for home made carbon diffuser.
배우신분들은 뭐가 달라도 다르네요...
구매하고 싶습니다...ㅎㅎㅎ
Amazing work!
As a complete novice, please excuse me if this is a dumb question. Did you have to get the custom pcbs, or could you have just wired up the circuits by hand with standalone resistors and wire?
Hi friend.
I made a PCB because I wanted to do better quality work.
But, If you do not have a PCB, you can use it by soldering a resistor with a wire.
Does that schematic also work for E9x models ?
I’m legally required to do this on my M3 now
Do you have the gerber file for the pcb?Thanks
Mantep juga lu tong, pengen banget bisa kelistrikan
재밌는 영상 감사합니다. 올려주신 Shifter_Mount_V2_For_BMW 파트가 바디 상관없이 사용 가능할지 궁금합니다~ BMW용 마그네틱 패들 굉장히 비싼데 심레이싱용 패들에 마운트 붙여 사용하는게 좋은 아이디어네요.^^
안녕하세요.
마운트를 다른 차량에 장착해보진 않았지만 G바디에도 맞을 겁니다. ^^
1st fail!!! 😂😂😂😁😁😁 good job
Hola, hay alguna manera de que me fabrique unas? no cuento con lo disponible para fabricarlas yo mismo!
Просто красавец! Ещё и в электрику может!
めちゃくちゃ面白かったです。次はボディーをカーボンでお願いします。
요술봉으로 회로를 만드시다니...
전공자로써 정말 탐나는 봉이로군요
안녕하세요.
거의 10년 만에 PCB 디자인을 해보았습니다.
정말 간단한 저항회로였지만 어색하더군요ㅎㅎ
10여년 전에 MCU에 빠져서 매일 같이 회로 설계하고 코딩했던 추억이 떠오르는 작업이었습니다.
직이네요
1725km on your car. Thats incredible!
That is 61725
That's +15hp for sure :p
국내에서 저런 재료들 구할수 있는곳이 따로 있나요?
출력에 사용하는 필라멘트는 뭘로 쓰세요?
Hello PLA or Abs t you print? THANK YOU👌✌️
Were the magnetic shifters originally for a sim rig? Wanting to do them on my 21 Supra just trying to figure out where to start lol
Hello friend.
The Asher Racing Magnetic Paddle Shifters are for sim and motorsports.
When are the Carbon fenders going to be made?
Ottimo. Vendi un kit?
Good job! What kind of mold release spray did you use?
Hello, friend
I used a FREKOTE-4368 release agent spray.
haz uno cambiando la anatomía del volante por favor
굿좝 맨.....친해지고싶네요...
와....
見た目はカーボン使ってる方がイイんですが、ウェットカーボンで行くならコスト考えるならFRPで良くないですか？
最後焼き入れしてドライカーボンにするのかと思ってたので少し残念でした。
部品としてはカッコイイですね！私も作りたいと思いました。
하..대박이네요 진짜.. 칩 같은건 저항인가요? 실례지만 어디서 구하는지 알 수 있을까요?
안녕하세요
PCB 기판은 저항을 납땜하기 위한 기판이며, 단순한 저항 회로입니다.
PCB 기판은 회로도 그리고 거버파일을 작성하여 PCB 공장에 발주하여 제작하였습니다.
굳이 PCB 기판이 없더라도 저항만으로도 가능합니다.
자료는 고정댓글에 보시면 회로도를 올려두었으니 참고하시기 바랍니다.
Please can you explain in a new video how to do the end part with the wiring? Where an we buy these chips in the uk etc, and how do they wire up? Please explain or reply here and I will give my email :) I want to make the same for my car
Where you buy carbon fiber? Can i get link?
What is the cad software you use?
👍👍👍
혹시 카본GT윙 수리 같은건안하시죠?
Whoa the scale doesn't broke yet
You are amzing bro ❤❤❤🥰🥰🥰😍😍😍✌✌👍👍👍👍👍👍👍
I want to do the same with my BMW
Can you make me a set for mercedes CLK steering wheel ??
Would you make those to order ?
Please produce these, I’m a buyer 100%
Where does one learn to design 3d printed stuff like this? I'm interested in making my own stuff too!
Hello, friend.
I did not learn modeling separately.
I am building my skills by doing various designs myself.
There are many Fusion 360 courses on RUclips.
They will help you.
실제 자동차회사들도 이런식으로 카본부품을 만드는건가요?? 에폭시같은걸로 굳혀서??
안녕하세요.
카본 파츠를 만드는 방법은 한가지 방법으로 정해져 있는 것은 아닙니다.
어떤 소재를 사용하느냐 어떤 상황에 사용하느냐 어떤 기능을 하느냐 그리고 어느 정도의 강도가 필요한지 각각의 상황과 요소에 따라 달라집니다.
🇧🇷👍👍