One thing I learned with casting metal, try to not make 90° angles in castings. Add a few degrees to the walls and the mold will pop the part right out.
Hard work but in the end the result has been incredible and it is clear that you have very good knowledge of how to treat carbon fiber and the material you have needed has been 10. Hopefully one day I will know how to do what you have done. great job man!
Oh boy, i've been there as well! Kudos to your persistence. Its hard. I know it is. But you did it - exceptionally well! Its done now, but my two cents for your project would have been: start with a positive mold. Less tricky with complex corners such as yours. Draft angles! Can't say for sure, but it looks like you held back on those a bit? Use a specialized filler or prime coat to get rid of layer lines and make sanding MUCH easier + you can achieve a perfect finish straight from the mold. Get (make) a vacuum pump. You can easily build one from a compressor off an old refrigerator or AC unit in a day or two - and comes in very cheap (80-100 bucks max.)
This is an epic steering wheel i would love to see it in my car (I don't think i could afford it) you should definitely sold this customized steering wheels for cars this is E P I C
Great project! My humble experience shows that any project can have some flaws. And it's great if you can still make great detail even it has some problems first. And your work with 3d model and electrics is impressive as always!)
Hi, Bro! Thank you for the comment. Actually, I've made 4-5 molds. so, I had failed a lot. That was so hard works. Recently, I am loving 3D design, and electronic works. My major was computer programming in University. I hope to develop electronic modules and carbon fiber parts for car. Thanks for the good comment always. Thank you bro.
Hello friend In positive molds, carbon fiber is laminated on top of the mold, so carbon fiber parts larger than the size of the molds are completed. The negative mold will have the same shape as the designed model.
Hey Bro do you know what OHMS to use to delete the Steering SRS? im having hardtime getting the correct ohms. Also do you know which wire to plug it on? there are 6 wires on the airbag and not sure which one. thanks in advance.
Not really a "how too" but watched it all nevertheless. By the when fanatec make a wheel that works on both sim and irl they charge a limb per wheel 😅 Do you make these for us to buy?
![How to Make a Carbon Fiber Swan Neck Wing [DIY] (with 3D Printed Molds)](http://i.ytimg.com/vi/eq5fILj1TOM/mqdefault.jpg)
This man will one day build a complete M4 shell in his office and I'm here for it. Craftsmanship 101%🔥
Na, it would never fit in his oven.
I freaking love this channel, no stupid intro, no story of your life about this and that, just get to work and get it done!
Geeeez, your patience knows no limits
Men on a mission...
Expected him to start throwing eggs on it for some reason...
Schematics & PCB Gerber Files : drive.google.com/drive/folders/1OF0iEHbfCqxwMFwK8TWUg17m7dQTzyxD
One thing I learned with casting metal, try to not make 90° angles in castings. Add a few degrees to the walls and the mold will pop the part right out.
YASSSSSSSS THIS IS THE VIDEO I'VE BEEN WANTING FOR SO LONG! Good stuff, my dude!
와~~~~ 인간승리네요ㅋㅋㅋㅋㅋㅋ 대단합니다!! 엄지척!!!
Hard work but in the end the result has been incredible and it is clear that you have very good knowledge of how to treat carbon fiber and the material you have needed has been 10. Hopefully one day I will know how to do what you have done. great job man!
That is some next level artistry stuff. You can't but admire your skill and determination. The finished product is amazing. Bravo sir, bravo 👏
Absolutely insane! Hands from right place!
I have literally been looking for a video on this for years, last time was right now!!! Thank you!!!!! amazing work!!!
had to hit that bell i missed this one one the 2nd, the ASMR is the best part by the way. Videos are getting way better too. i love it
I've been a big fan of your videos for a while now and I spent the whole night catching up on everything you've posted. 😍
거푸집도 3D프린팅으로 만들고 오븐으로 굽는거 실화냐...
빨리 떡상하셔서 장비 좋은걸로 사십쇼!
BEST RUclipsR!!!
Some people are just so talented! WOW!
Oh boy, i've been there as well! Kudos to your persistence. Its hard. I know it is. But you did it - exceptionally well! Its done now, but my two cents for your project would have been: start with a positive mold. Less tricky with complex corners such as yours. Draft angles! Can't say for sure, but it looks like you held back on those a bit? Use a specialized filler or prime coat to get rid of layer lines and make sanding MUCH easier + you can achieve a perfect finish straight from the mold. Get (make) a vacuum pump. You can easily build one from a compressor off an old refrigerator or AC unit in a day or two - and comes in very cheap (80-100 bucks max.)
Loved watching this and amazing work, though seeing you cut it with the dremel indoors without sleeves on... I'm getting itchy already
This is an epic steering wheel i would love to see it in my car (I don't think i could afford it) you should definitely sold this customized steering wheels for cars this is E P I C
I have been waiting to do this to my car for months and could not figure out how you get quick release paddle shifters… this is amazing. Thank you.
Bravo !!! From France
2000 years later That was classic!!.. Epic efforts on all this my friend! Going to attempting CF on my motion rig.. Cant wait!! DMAX motion sim
Great project! My humble experience shows that any project can have some flaws. And it's great if you can still make great detail even it has some problems first. And your work with 3d model and electrics is impressive as always!)
Hi, Bro!
Thank you for the comment.
Actually, I've made 4-5 molds.
so, I had failed a lot. That was so hard works.
Recently, I am loving 3D design, and electronic works.
My major was computer programming in University.
I hope to develop electronic modules and carbon fiber parts for car.
Thanks for the good comment always.
Thank you bro.
Salut ! Content de revoir une vidéo !!
C'est quali de ouff
Very nice work! Maybe I'll try prepreg one day.
Best diy wheel ever
This is just INSANE !!
Amazing work as always!
영상 기다렷는데 오랜만에올리셧네요~!ㅎㅎ 항상잘보고잇습니다
Everything you did make me feel its so easily
광고 축하드립니다 형님 항상 질 좋은 컨텐츠 제공 감사합니다
yes sir 🙌🏻
Ohhh no way I’ve been waiting for this one!!!
Cool video bro. I like your style man 😁
Great video! Can’t wait for the next one! Keep it up!
Wow!!!! Absolutely awesome. Thank you 🙏
Nice work!
Amazing as usual! Came out perfect!
amazing work.
awesome work, hope you're wearing a proper filteration mask, CF is dangerous when in dust form from sanding
I lmao at the beaver part 🤣 id be furious
Love your videos, inspiring :)
Damn. Respect bro for your hardwork!!!
Very impressive!
for anyone trying something like this, use a SEALING facemask when sanding carbon fiber, the dust it creates is extremely bad for your lungs.
Вот почему так долго не было серии)) Супер, продолжай!
Nice work
Superb Craftsmanship
Very nice work 🥶💧💧💧💧💧
Love it definitely gonna be my guide for my first composites project
amazingggggg all are made by ingenius incredible !!!!
you can try printing the mold verticaly so the carbon fiber comes get off more easily
Отличная работа!
아니 이런 환자분을 알고리즘이 왜 이제 알게한거지 ㅋㅋㅋ 바로 구독과 좋아요 누르고갑니다 ㅋㅋ
consider using ASA plastic, and then apply acetone vapor smoothing technique to make surfaces smooth.
Respect man!
Do more: carbon TV, carbon chair, carbon sofa) Nice video)
진짜로 휠 깎아서 만드시는 장인..
Oppa is back 😳
Superbe réalisation !
도데체 못하는게 뭔가요? 대단합니다. 정말 배우고싶습니다
Excellent
한국인이라 자랑스럽습니다ㅎㅎ
That is a cool steering wheel indeed
this. was. amazing.
It very vey very cool..
영상 기다렸고요~~!!!! 잘보겠습니당
Can I love your videos
Incredible work! Love the attention to detail with the stitching too! 😂
What is that QR you're using? It looks great!
국뽕이 차오른다~ 대단하심다! 근데 버튼은 어디서 구하셨나요ㅋ
Hahaha your video is so cool..
Where can I buy that LED PCB circuit that you are soldering ? It appears 14:46. Thanks !
Just like DTM steering wheel :) i like it so much
This is great! but why not make a male profile mold and then layer the CF over it?
Hello friend
In positive molds, carbon fiber is laminated on top of the mold, so carbon fiber parts larger than the size of the molds are completed.
The negative mold will have the same shape as the designed model.
Love the video! Next time when finishing the 3D printed mold, use black epoxy spray paint. That’s what I did and it worked great!
Really amazing. You are awesome
Bro you are one fawking talented guy... and i want that wheel LOL
10만 축하드립니다
I love the fact he has what looks like a fanatec QR2 two years before release 😂
Bmw needs to hire you at this point
진짜 존경스럽다.
시뮬주행 인제에 레카로 시트까지 ㅋㅋㅋㅋㅋ
혹시 공대 출신이신가요????
안녕하세요.
공대출신은 맞지만 기계관련 전공을 하지는 않았습니다. ^^
bravo!
wow, amazing!
이 형 진짜 손재주가 와우
Are you adding a draft angle to help in releasing the mold?
Hi friend.
I applied the fillet to the new mold and it helped a lot with the release as well as the shaping of the fibers.
Hey Bro do you know what OHMS to use to delete the Steering SRS? im having hardtime getting the correct ohms. Also do you know which wire to plug it on? there are 6 wires on the airbag and not sure which one. thanks in advance.
Probably the nicest homemade wheel I've seen yet the quality is insane lol I want to ask you to make me one and how much would I have to pay you haha
Good evening! How long you bake prepreg and what temperature?
Sos un genio amigo...felicidades
Well...i mentioned it in the helmet video but here it is, you already did it
와... 대단하십니다 👍
I'm confused, how are you using the Krontec QR hub with the fanatec wheel? Is there an adaptor on the market or did you make it yourself?
중독되는소리와 영상잘보고가요, 재미도있구!! 👏
would you make another carbon cover since you have the mould. would love to buy one!
Man I'd love you have one on those for my modded out EcoBoost mustang. Very nice!
Do you make any specific orders sell your merchandise.
Great project! Where did you buy those led rings? What is the name of that product?
В следующей будешь лепестки увеличивать? Ведь не дотягиваешься же😂
wich Krontec quick release shaft do you attached to the base?
Not really a "how too" but watched it all nevertheless.
By the when fanatec make a wheel that works on both sim and irl they charge a limb per wheel 😅
Do you make these for us to buy?
게임용 레이싱 휠인줄 알았는데...
갑자기 차량용 멀티펑션 스위치가 보여서 헉~~~!!! 했습니다.
언제봐도 카본은 진리군요...