I have never been more inspired to give a try at making a carbon fiber anything. This was a great video my friend. I'm to look into a few parts to make on my car now. Definitely need a standout design like this to make my car one of a kind.
The part pressed wasn’t filled evenly, only a few strips of foam inside, with vacuum it would have collapsed or the glue would burst out due to the pressure
Gorgeous as always! Sorry for your car though, I hope you guys settled it. Anyway, have you done a carbon fiber phone case before? That'd be dope! Since it's smaller, simpler, and also cheaper on the material too, maybe more people will be able to actually start learning how to create carbon fiber stuff
I have no where near the kit for this but it does give me so insight into how to make one of of metal (Swan neck) at least, also just very much enjoyed the process
Getting hit from behind absolutely sucks!! I’ve hd it happen twice on the motorway here in Australia, one not dissimilar to this. I’m still super anxious in traffic!! Nice work mate, all your stuff is great, including the video production!!!
I died a little inside when you went straight to UV instead of a fast cut then polish on a pad. Great results still but all that hard work you deserved popping a little Meguiars on there haha
Great video but, how did you do the spoiler stalks? Your video focus' not he wing more and they sort of just happen. How many layers of carbon did you use to make them strong enough? Are they hollow, made of 2 parts glued together like the wing?
Hello friend. I ordered CNC machining from my friend's factory in South Korea. I'm sharing the model files for CNC machining (step files). You can be able to do CNC machining with the files in your country.
I have seen that some runners who make their parts from carbon fiber, they put vinyl in the molds they make for even easier peeling and the surface is even smoother.
Good job and it looks very simple like anyone can do it. Few suggestions for your next video : DYI Airbus A380, DYI multinational automobile manufacturer
You did a great job and spent a lot of time with the sanding block - but the result is totally worth it! 👍😎👍 Maybe a fill primer would be a quicker way to eliminate the 3D print structures (instead of the gel-coat), because the primer is way more easy to level. But I hope, you won't have to build another one - at least not for the same reason! Have fun with your great looking car! Greetings all the way from Berlin!
Epoxy gelcoat bonds much more stronger and less likely to come apart when de-molding. Maybe with a one-time only use mold, fill primer is fine. But with the amount of materials used just for the molds, it would seem much better to have everything stronger for producing multiple parts before if that is his case. Maybe he just has gelcoat handy on him so he just used it.
@@voongnz Your suggestions might be right. I used.plastic primer combined with a high build primer with ABS and PLA prints in the past and had no adhesion issues. As long as the mold is waxed and prepped with PVA, like perfectly shown in the video, filler should be all right. But that's just a little recommendation, the wing came out great and reality proves, there are a lot options to find a solution. 💪
@@WestBerlinCustoms yes absolutely, proper application of release agents and mold design is what matters the most when de-molding and having the mold and part in good condition after. Yeah many different processes for the solution, many people just apply a single layer of gelcoat and let it self-level for a smooth finish. So even his example is different.
La verdad muy buen trabajo 👍,me suscribiría si no fuera por las 24 publicidades dentro del video que terminan quitando interés a lo que uno está viendo. Saludos!
Good question. Normally contact areas have a layer of fiberglass in between to act as a barrier to prevent conductivity. Didn't see it here as part of the build.
@@nottherealjk Yeah I'm using aluminum to mount some items on a monocoque I am making. I have read the info and plan on using a thin sheet of fiberglass over the aluminum plates. But IDK.. I heard that GALV corrosion will weaken the carbon (like rust or something?).. If you learn anything about it on your project write me back.. Thanks DMAX motion sim
Yeah same question here .. I'm using aluminum to mount some items on a monocoque I am making. I have read the info and plan on using a thin sheet of fiberglass over the aluminum plates. But IDK.. I heard that GALV corrosion will weaken the carbon (like rust or something?).. If you learn anything about it on your project write me back.. Thanks DMAX motion sim
Hello friend. I fixed the insert mounts that connect the wing and the upright, and those mounts were bonded in place on the 3D printed mold. We bonded other insert mounts based on those mounts. I didn't think an indexing pins were needed.
![DO NOT MAKE CARBON FIBER PARTS AT HOME (Making Charge Pipes) [DIY] with CR-Scan Lizard](http://i.ytimg.com/vi/YNWu1-r5HGo/mqdefault.jpg)
![DO NOT MAKE CARBON FIBER PARTS AT HOME (Making Charge Pipes) [DIY] with CR-Scan Lizard](/img/tr.png)
![How to Make a Carbon Fiber Wing [DIY] (with 3D Printed Molds)](http://i.ytimg.com/vi/BSv0XuPGUig/mqdefault.jpg)
ECO-LAP Studio Instagram : instagram.com/ecolap_studio/
Wing Model File : drive.google.com/drive/folders/1f-slPY0C0sR2p-qqYSm7kEEfD0eCoO-y?usp=sharing
What's your g-code that you used for the
This wing looks amazing, I want to build on for my race car, where can we find the billet inserts you used to mount it?
Thanks for uploading files ! Tryin to do some to my project
Is this a Creality CR-10S Pro printer? Can I do the same thing on a Creality 3D Ender 3 V2 printer?
고급기술…그저 감탄 하다가 갑니다❤
absolutely brilliant !! i'm working on a single seater race car project and i gotta say your videos are really useful, keep it up man !!
Nice 😍 are you recording your build?
I am building my dream V12 supercar 😎
I have never been more inspired to give a try at making a carbon fiber anything. This was a great video my friend. I'm to look into a few parts to make on my car now. Definitely need a standout design like this to make my car one of a kind.
와.... 이번건 진짜 처음부터 끝까지 넉놓고 쭉 봤어요
For clamping during glue-up, why not use a vacuum bag as well? It applies very even pressure, and is used a lot in guitar building, for example.
The part pressed wasn’t filled evenly, only a few strips of foam inside, with vacuum it would have collapsed or the glue would burst out due to the pressure
You got that $400 ultrasonic cutter but you're still using the DIY pump lol. Bruh
Ultrasonic avoid dust (is a health precaution) and the hand pump makes him work out (help benefit).
Petty 😂😂😂
He also has a BMW M4 and still uses a non-electric pump hahaha
And baby wipes 😂
@@rarih100
Well baby wipes are very useful in cleaning works. We don't have any baby but still we always keep these in the house.
Glad to see massive improvement vs previous wing 😁. Good job !
Nice work. I want to scan in my current wing so i can make a swan neck version (discontinued 8 years ago).
You vids really make it possible!!
Gorgeous as always! Sorry for your car though, I hope you guys settled it.
Anyway, have you done a carbon fiber phone case before? That'd be dope! Since it's smaller, simpler, and also cheaper on the material too, maybe more people will be able to actually start learning how to create carbon fiber stuff
Ah you already made that one, I don't even remember watching it😅
어쩌다 발견한영상이지만 엄청난 실력자이시다... 능력이 부럽네요 바로 구독박고 갑니다
I woul put positioning pins on the 3d printed molds. Makes it easier to assemble and align them correctly.
Your work is amazing! Keep up the fantastic pieces you make! Absolutely love them!
What kind of a parking garage is that? It looks more like a Luxury Auto gallery :D Great craftsmanship by the way.
Why don't you make all the body parts with carbon?
많이 안다치신거 같아서 다행입니다. 궁금한게 있는데 저렇게 diy하신 파트의 보상은 어떻게 되나요?? 저걸 어떻게 비용으로 책정해요... 아까워요
안녕하세요.
기본적으로 재료비를 기준으로 보상이되며, 일반적으로 시중에 판매되는 제품의 가격을 참고해서 보상금이 책정되더군요.
I have no where near the kit for this but it does give me so insight into how to make one of of metal (Swan neck) at least, also just very much enjoyed the process
Glad you're back! Hope you're feeling better
대건에서 서브프레임 내린거 봤습니다 잘 수리하신것 같네요~ 차 여기저기 손수 꾸미신거보고 차에대한 애정과 손재주가 대단한분이구나 했습니다~ 재밌는 영상 잘봤습니다~
This is dope af. Really wanna try this out during my break from school. And give a friend of mine his wing that he’s been asking for. Thank you.
the furious typing sold me, I'm subscribed
Great job. 👍🏼 where did you get that adjustable sanding block???
Hello friend.
The sanding block is from Sia.
Работа шикарная как и всегда)🖐️👍
Where did you get that aluminium extrusion for mountings? Great video!
Amazing man, wish I had these skills to create my own blue cf wing. I have some skills but this is beyond me.
안녕하세요 혹시 이 쓰고남은 몰드 살수 있을까요 ㅠㅠ
사고 난건 넘맘아픈데… 슈퍼맨이시네요…금손 !!! 대단하십니다
With the swan neck wing, probably soon you could try to build some active aero mechanism to pair it with :D
Getting hit from behind absolutely sucks!! I’ve hd it happen twice on the motorway here in Australia, one not dissimilar to this. I’m still super anxious in traffic!! Nice work mate, all your stuff is great, including the video production!!!
I died a little inside when you went straight to UV instead of a fast cut then polish on a pad. Great results still but all that hard work you deserved popping a little Meguiars on there haha
블랙박스 보기전까지 한국인인가 긴가민가했는데 카본을 이렇게 잘다루는 분이 있을줄은 몰랐네요 진짜 외국분인줄
Hello, amazing work!
Can you please explain why you used pva and ethanol in the process?
Very nice work mate. Use PPE when you are working with carbon fibre. The dust is more dangerous than asbestos
may i ask you how do you calculated the lift of the wing?
Great video but, how did you do the spoiler stalks? Your video focus' not he wing more and they sort of just happen. How many layers of carbon did you use to make them strong enough? Are they hollow, made of 2 parts glued together like the wing?
크게 안다치셔서 다행입니다. 항상 안전운행 하세요.
Awesome looking craftsmanship! Not my preferred style of wing but stunning looking work!
헐.. 사고라니 ㅠㅠ 많이 안다치셔서 다행입니다
멋지십니다 직접 제작이시라니 ㄷㄷㄷ
마지막 주차장은 혹 일산이 아니실런지??^^; 아는 차들이 나온것같아서요 , 영상 너무 재미있게 잘 봤습니다!
주차장 차들이 ㅎㄷㄷ 보이는 페라리만 몇대인지 ㅎ
Hey mate! Beautiful work, and also very complex. The small trunk lip, how are they made? Also empty inside? Thank you!
How did you machine the metal parts for the mount? Is there a video on that?
cool video, how did you choose your airfoil for the spoiler? also do you have any videos of the spoiler while driving the vehicle?
윙을 잡아주는 스완넥 브라켓 소재는 무엇으로 하셧나요??
what is the softwera use for make 3d molds?
Great work! My only concern i, that Water could get in from the swan neck holders, inbetween the two spoiler halfs
Amazing work as always bro, truly inspiring, I think I might have to attempt making some sideskirts after watching your videos
Hi bro.
Long time no see!!
I hope your work goes well.
와 화 많이 나셨을 것 같은데 ㅜㅜ
많이 안다치신거 같아보여 다행이네요…
diy 하시는 금손 같은 모습에 구독 박슴다!! ㅜㅜ
와아아 퀄리티 대박....금손이시군요....잘보고있습니다...굿좝....
이야....아파트에 차들 클래스가.....후덜덜하네요
So sad to see the accident, glad youre ok though!!
Some serious skills!
Amazing! I think I will start small and make paddle shifts for my Stronic lol
What material did you print with?
.대단하시네요. 수명은 단축하셨지만 카본 빌더 하셔도 될 거 같아요.
What brand of epoxy do you use
컷팅하는 기계가 어떤건가요?
Awesome! What kind of filament and how much infill did you use for the 3d printed mold parts? 😊
Hello, friend
I used PLA filament. And the molds are infilled 20%.
I hope you helpful.
Nice work! Did you understanf how much sandpaper will you use making carbon parts before you started? Because I did not :))
請問一下 8:53放上去的那一片白布是什麼東西? 跟9:11放上去的那一片是甚麼 懇求解惑
What kind of sick parking house are you. Supercars everywhere. Btw nice job. Looks like a lot of work
Where did you get the bracket cnc from?
What shop or website.
Hello friend.
I ordered CNC machining from my friend's factory in South Korea.
I'm sharing the model files for CNC machining (step files).
You can be able to do CNC machining with the files in your country.
I have seen that some runners who make their parts from carbon fiber, they put vinyl in the molds they make for even easier peeling and the surface is even smoother.
Have you done any FEA on the wing uprights to see what force they fail at? Working on a carbon fiber wing project myself right now.
Stunning work. Excellent!
Glad you're ok and great work as always :)
hi,may i ask where to buy the 4:32 gripper?
영상 시간가는줄모르고 잘 봤어요~ 혹시 기존 사고전 윙 구입처좀알수있ㄹ가요??
The fact that you made it seem like you did this to be petty to the other driver makes this so much better.
우리나라에도 이런 능력자가 있다니 놀라울 따름입니다 O.O
Good job and it looks very simple like anyone can do it. Few suggestions for your next video : DYI Airbus A380, DYI multinational automobile manufacturer
Which filament do you use: PLA, ABS, PETG?
Hey please can you explain how you created the mold for wing on fusion 360?
Another beautiful work 😍 very nice job! I'm fan ❤️
많이 안 다치셨나요? 후유증 조심하세요ㅠ 괜찮은 것 같아도 매일 한의원 가시는 걸 추천합니다ㅠ
슬픔은 세계 공통입니다. 동영상을 모두 보았습니다. 부품을 모두 스스로 만들 수 있는 것은 굉장합니다.
Good job DIY!! From Japan.
ありがとうございます。 ^_^
So you dnt use an autoclave?
Are BMWs made of paper? I totaled mine last year lol
so relaxing to watch
You did a great job and spent a lot of time with the sanding block - but the result is totally worth it! 👍😎👍
Maybe a fill primer would be a quicker way to eliminate the 3D print structures (instead of the gel-coat), because the primer is way more easy to level. But I hope, you won't have to build another one - at least not for the same reason! Have fun with your great looking car! Greetings all the way from Berlin!
Epoxy gelcoat bonds much more stronger and less likely to come apart when de-molding. Maybe with a one-time only use mold, fill primer is fine. But with the amount of materials used just for the molds, it would seem much better to have everything stronger for producing multiple parts before if that is his case. Maybe he just has gelcoat handy on him so he just used it.
@@voongnz Your suggestions might be right. I used.plastic primer combined with a high build primer with ABS and PLA prints in the past and had no adhesion issues. As long as the mold is waxed and prepped with PVA, like perfectly shown in the video, filler should be all right. But that's just a little recommendation, the wing came out great and reality proves, there are a lot options to find a solution. 💪
@@WestBerlinCustoms yes absolutely, proper application of release agents and mold design is what matters the most when de-molding and having the mold and part in good condition after.
Yeah many different processes for the solution, many people just apply a single layer of gelcoat and let it self-level for a smooth finish. So even his example is different.
아니... 사고낸 사람 욕을할라했더니... 3번 흐느끼다가 깊은 빡침을 스완넥으로 승화시키는 횽은... 그저...... 금손...ㅋㅋㅋ
It seems that you have not done any measure to prevent galvanic corrosion between CFRP and metal parts.
Anodising creates a thick enough barrier between the carbon and the aluminium, and the bonding adhesive gives enough space between the pieces too
A fantastic job.Thanks for sharing
Is there a way to reinforce it structurally? Would this withstand highspeeds with a lot of downforce?
I thought the sam would like to see video capturing 250 km/h
Can you make a swan neck Ford GTD wing? And how much?
Hi do you have a link to find your vaccum pump? Thanks 👍
How do you know where to cut exactly once it's out of the mold so the two halves align perfectly?
La verdad muy buen trabajo 👍,me suscribiría si no fuera por las 24 publicidades dentro del video que terminan quitando interés a lo que uno está viendo. Saludos!
日本語ですいません、質問させて下さい。カーボンを切った時肌に刺さらないのですか？
can you make carbon fiber motorcycle faring ?
Where to buy the other materials……
Carbon, bags, epoxy…????
Thanks….
Awesome video
How many meters of fiber did you use approximately ?
Great job !!
will this work even if i dont have a car?
Great video! One curiosity, how do to ensure you do not get galvanic corrosion with carbon and metal bolts?
Good question. Normally contact areas have a layer of fiberglass in between to act as a barrier to prevent conductivity. Didn't see it here as part of the build.
@@nottherealjk Yeah I'm using aluminum to mount some items on a monocoque I am making. I have read the info and plan on using a thin sheet of fiberglass over the aluminum plates. But IDK.. I heard that GALV corrosion will weaken the carbon (like rust or something?).. If you learn anything about it on your project write me back.. Thanks DMAX motion sim
Yeah same question here ..
I'm using aluminum to mount some items on a monocoque I am making. I have read the info and plan on using a thin sheet of fiberglass over the aluminum plates. But IDK.. I heard that GALV corrosion will weaken the carbon (like rust or something?).. If you learn anything about it on your project write me back.. Thanks DMAX motion sim
사고이후 처리는 어떻게되었나요? 예를들어 렌트카를 어떤걸로 받으셨는지
Is this a Creality CR-10S Pro printer? Can I do the same thing on a Creality 3D Ender 3 V2 printer?
Were did you get the wing hardware?
드디어 영상이 올라 왔네요.
그나마 몸 안다치신게 천만다행이시네요..
Hello I wonder why you don’t use indexing pins or other shapes to align parts?
Hello friend.
I fixed the insert mounts that connect the wing and the upright, and those mounts were bonded in place on the 3D printed mold.
We bonded other insert mounts based on those mounts.
I didn't think an indexing pins were needed.
저세상 금손이신데요...?