Your videos are so helpful. I am NOT mechanically inclined but your videos make me able to service my boat with ease. Gives me piece of mind and a little bit of pride!
As always captain another great video. I’m in Australia on vacation but won’t miss a new video of yours. Thanks for an informative video that I know I will use on my new center console! Prop clear!
Thank you captain you're awesome for watching from beautiful Australia and when you happen that plane don't forget to say prop clear lol don't ge In trouble FAA 😁👍⚓️🛥
Buen cambio de thermostat. El maltenimiento de un bote es premiolda para difrutalo por un largo tiempo. Although I don’t own one, it’s a great video for others to learn from. Haora listo para el agua!
Si muy cierto capitan y siempre es bueno aprender auque no tengas varco por ahora es bueno saver lo lleva tener uno ,saludos capi y bienas noche 👍😉🛥⚓️🦈
You can learn captain everybody Learned at 1 point and with the little practice you could start doing small things and you can move up the bigger things. I believe in your captain😉👍🛥⚓️
@Cliffstrass Thank you, captain. I don't have the part numbers since I did this video a long time ago. But if you go to boats.net you will find it there cap, Thanks for watching
Thanks for sharing. I appreciate a lot all the knowledge you share. This is a great tip. God bless you and your family too. I hope to see you on the water soon... Clear Prop!
Great video. Was there a gasket on the thermostat housing? Couldn’t tell in the video and you made no mention of it. Would have been worth changing it also if there was one. Loved the demonstration with the old thermostat. Prop clear. 👍👍
My reason to get the most accurate fully load numbers is to get the right prop pitch. More power lower rpm's. More range at faster speeds when conditions are flatter.
They say the dealer must inspect that every 100 hours. And if it needs to be changed there will change it. But in my case I think 200 hours is a good time to change it.👍
Man Fantastic videos! keep them up! Question - When you run the muffs do you have water coming from your tell tale? I have never been able to get enough pressure unless I squeeze the muffs or block of lower vent holes. I am about to start using a garden hose splitter so muffs along with the upper flush port.
Yes a lot of water comes out out of the connectors. But that is normal because the Of the agents are very small. That's why you can't get a lot of water into them captain but I have the same problem
Capt, that was a very nice demonstration of how a thermostat operates and I had never seen that before. Was the thermostat due replacement because of hours on the motor and did you not have to replace a gasket during installation or maybe the gasket was still okay?
Hello captain. The gasket comes with the thermostand I changed it because it was due. It has 300 and hours plus. And the dealers say to inspected every hundred hours by them
5000lbs seems light, the Base DRY WEIGHT boat is 3500 lbs, Who knows what the options gotten at time weight? Gas 90 gals = 550 lbs. The motor is 500lns. You weigh say 175 lbs guess, Live well guess water 50 gals= 300 lbs. Gen 50 lbs. All other stuff says 800lb to 1100lns. That like closer to 6,000lbs
Just saw the video through. You do flush. Great. Still, using a salt remover hel[s clean and protect. "Simply rinsing salt away with fresh water is not enough to remove salt and over time the build-up can cause mechanical problems and breakdown."
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Your videos are so helpful. I am NOT mechanically inclined but your videos make me able to service my boat with ease. Gives me piece of mind and a little bit of pride!
@@lbsean35 awesome cap. You can do it and save some money in the process, im proud of you 😉👍👌⚓️
Great job, Captain. People who can work on their own equipment normally make out better.
I agree cap. And wen ot comes to emergencys we know how to make fast repairs, thanks for watching cap 👍
SALUDOS CAPITAN ESO ESTA NUEVO ESO AGUANTA UNA BOLA DE HORAS JAJAJAJAJAJAJAAJAJ✌✌✌✌
Wow capitan se be bueno todabia
@@OutOnTheReef TE AHORASTE UN CHORRO DE PLATA SI LO LLEVAS A UN DEALER TE COBRAN LO QUE VALE EL MOTOR JAAJAJAJAJAJAJJAAJ
As always captain another great video. I’m in Australia on vacation but won’t miss a new video of yours. Thanks for an informative video that I know I will use on my new center console! Prop clear!
Thank you captain you're awesome for watching from beautiful Australia and when you happen that plane don't forget to say prop clear lol don't ge In trouble FAA 😁👍⚓️🛥
Buen cambio de thermostat. El maltenimiento de un bote es premiolda para difrutalo por un largo tiempo. Although I don’t own one, it’s a great video for others to learn from. Haora listo para el agua!
Si muy cierto capitan y siempre es bueno aprender auque no tengas varco por ahora es bueno saver lo lleva tener uno ,saludos capi y bienas noche 👍😉🛥⚓️🦈
Great job, Captain. The Crooked Pilothouse is going to be in great shape.
Thanks cap. And yes the crooked pilothouse is ready now for summer 😉👍⚓️🛥
Wow you really take care of that engine! That thermostat looked new compared to others I seen in the past!
Thank you captain and that's the 1st time. I changed it and it's because I always flush the engine that's why I look good Thanks for watching captain
Easy peasy thanks for the brief video with all the important info!
You're welcome! thanks for your positive feedback cap,
The Pilothouse may be crooked but not that Yamaha engine! You keep it well-balanced, maintained, and clean. Great job as always Cap!
lol Thank you very much! and yes the engine is strait 😉👍👍😁⚓
Nicely done
@@williamrobarge3111 thanks cap
Excellent video!
Thank you!
Glad you liked it!
I love how easy it is to work on these Yamahas! So refreshing from an inboard! Lol
It really is! cap they are fast repairs and yes i seen you work on yours and is very closed spaces and parts hard to get to, thanks for watching cap.
Wish I had the confidence to do that type of work on my engine. Nice work Captain!
You can learn captain everybody Learned at 1 point and with the little practice you could start doing small things and you can move up the bigger things. I believe in your captain😉👍🛥⚓️
Nice video Capt!! You never disappoint!!!
Thank you kenneth you're awesome👍
Nice job captain 👍🏽
Thx Captain. Your videos are great. Very helpful! Please continue! 👍
Thank you russell for motivating me of making more videos captain😉👍⚓️
Excellent job captain .as usual!!!!
Thank you Padro saludos capi
Another good and informative video keep em coming skipper!
Thanks, will do! Tito thanks for watching cap
Preparandose para proximas aventuras Capi. Saludos.
Si. Apitan y pronto te tarire nuevos videos capitan, saludos
Well done Captain! Excellent videos as usual…
Thank you captain I appreciate your awesome feedback👍👍
HI. Great video. Apologies, but i don't see the link of the part you replaced. Thanks.
hello cap amazon made me remove them , they are terrible , thanks for watching
Cap, it is a total monopoly.
@@marlonm396 i agree cap
Hi Capt. Nice informative video.
Thanks for putting that out. I'm sure I will eventually refer back to this video when it's time to change mine.
Awesome captain nice to hear from you and hopefully you have a great Fishing This summer
Awesome video! What part number was that thermostat?
@Cliffstrass Thank you, captain. I don't have the part numbers since I did this video a long time ago. But if you go to boats.net you will find it there cap, Thanks for watching
As always great information👍🏼👍🏼
Thanks cap. 😉👍
Prop clear my friend, stay safe out there
Thanks Paul 😉👍Prop Clear!!
Thanks for sharing. I appreciate a lot all the knowledge you share. This is a great tip. God bless you and your family too. I hope to see you on the water soon... Clear Prop!
Hello cap and thank you for the feedback and for watching and hopefully I will see you on water cap.😉👍prop clear
Good Info! Thanks for sharing! 😎👍
😉👍⚓️
Great video. Was there a gasket on the thermostat housing? Couldn’t tell in the video and you made no mention of it. Would have been worth changing it also if there was one. Loved the demonstration with the old thermostat. Prop clear. 👍👍
Hello cap. And no there is no gasket only the thermostat and thanks for watching cap 😉👍⚓️
Hey Captain, I didn't see a link to your trailer guide poles. Can you tell me where you got them from ?
Sorry captain but it came with the boat it was built by the manufacturer.
Look at thos one at amazon cap. amzn.to/3TLDdsb
...LOOKIN. GOOD, NICE JOB OF A BIT OF FINE TUNING, GOOD INFO, KEEP SAFE SKIPPER, AND SMOOTH SAILING,,
Thanms Bob getting ready for the summer 👍😉⚓️
@@OutOnTheReef THE FISH ARE HIDING ALREADY...LOL..
That was cool captain!
Thank you and im getting ready for the summer 👍🛥⚓️🦈
Thanks.
Thank you for watching captain ⚓️🛥
My reason to get the most accurate fully load numbers is to get the right prop pitch. More power lower rpm's. More range at faster speeds when conditions are flatter.
I need in the future to repower to a 225 hp cap. I do need it
Useful! What is Yamaha's recommended thermostat replacement interval for this engine, please?
They say the dealer must inspect that every 100 hours. And if it needs to be changed there will change it. But in my case I think 200 hours is a good time to change it.👍
A bit curious about your choice to not use"Salt Away"?
No need cap my engine looks great just using a lot of fresh water
Thank you 🙌
Thank you for watching captain
Just looking for confirmation from someone regarding the "little hole" position. Oriented down is correct? Thanks!
Awesome cap. Thanks fpr confirming that 👍👍🛳
Man Fantastic videos! keep them up! Question - When you run the muffs do you have water coming from your tell tale? I have never been able to get enough pressure unless I squeeze the muffs or block of lower vent holes. I am about to start using a garden hose splitter so muffs along with the upper flush port.
Yes a lot of water comes out out of the connectors. But that is normal because the Of the agents are very small. That's why you can't get a lot of water into them captain but I have the same problem
Buen video capitán saludos
Muchas gracias capi
Buenos dias capitán
Como ves el tiempo para cruzar el domingo a bimini
Bro me puedes dar tu número de teléfono para cuando quiera cruzar poder hablar sobre el tiempo ya que tu tienes mucha experiencia
@@yanisvelcruz7929 por ahora se ve bien ,yo regrese de Binini hoy eatava en Hoffman cay tambien👍⚓️
Your very through! As usual!
Thanks cap. I try my best to help my viewers 👍🛥⚓️
Excelente video
Gracias German😉👍⚓️
Capt, that was a very nice demonstration of how a thermostat operates and I had never seen that before. Was the thermostat due replacement because of hours on the motor and did you not have to replace a gasket during installation or maybe the gasket was still okay?
Hello captain. The gasket comes with the thermostand I changed it because it was due. It has 300 and hours plus. And the dealers say to inspected every hundred hours by them
👍
Thanks cap
Is this the same thermostat location for a 2010 2 stroke 150hp?
hello cap. i have not see that engine but look at your manual that may help, thanks for watching cap.
@@OutOnTheReef thank you. it is different I found out
@bbulliard awesome cap. I hope you get it done 👍👍🔩🔩
good job cap
Thanks David😉👍
Hi can you please give me the part number of the thermostat please I do have a 2012 F150 four struck full injection
Hello cap. In this website that im sending you, you can get all part numbers specialy for your 150.
Is boats.net
Hope it helps because i dont remember the part cap.
Great video
Thanks Samuel for watching cap
Nice job
Thanks Will👍⚓️
Cool
🙂👍⚓️
Saludos Capitan tu deberías trabajar en la nasa.
Jajaja Edwin me botan del la Nasa rapido🤣⚓️pero si de marinero👍⚓️
Zipties instead of hose clamps?!?!
Yes cap. That is how it comes from factory, remember there is very little pressure at that hose
Not that you run a fully loaded boat max'd out all the time. But using a 225 HP motor would give you more range.
Most definitely captain I would love to have a 225 horsepower engine. That's really. What I need on my boat
Still weighting on boat weight fully MAXIUM loaded.
Mee too cap. But im leaning more towards 5000 lbs fully loaded cap
Small hole should be on top
hello cap. but wen i first replaced mine it came from factory on the bottom and why you think it should be on top cap?
5000lbs seems light, the Base DRY WEIGHT boat is 3500 lbs, Who knows what the options gotten at time weight? Gas 90 gals = 550 lbs. The motor is 500lns. You weigh say 175 lbs guess, Live well guess water 50 gals= 300 lbs. Gen 50 lbs. All other stuff says 800lb to 1100lns. That like closer to 6,000lbs
Wow that is very possible cap im underpowered for sure
Just saw the video through. You do flush. Great. Still, using a salt remover hel[s clean and protect. "Simply rinsing salt away with fresh water is not enough to remove salt and over time the build-up can cause mechanical problems and breakdown."
Very true cap 👍⚓️
The markup in marine service is criminal
yes i agree that's why i place this videos on RUclips to help other not to get rip Off , thanks for watching cap.
Capt I though it was every 100 hrs on t stat along with engine service JT 🇺🇸🇺🇸🎣🐟🐠🛥
Yes you are right cap the dealer inspection and if it need replacement they want to do it , thanks cap.⚓️😉🛥🦈