I Modified My Mercedes AMG With Full Dual Custom Cold Air Intake
HTML-код
- Опубликовано: 7 сен 2024
- Items needed:
TREADSTONE 70 DEGREE PIPING (AP30070): shorturl.at/jpzZ9
Straight Coupler Silicone 3-Inch ID 12-Length: shorturl.at/gBDPZ
Spectre Performance 9833 3" Inline Air Box: shorturl.at/lGRX2
Subscribe to the channel and don't forget to leave a comment on what you would like to see more of!
Follow me here👇🏼
▫️ Instagram: / heyboys_garage
Check out other videos!
LOWERING THE MERCEDES CLK500 WITH H&R LOWERING SPRINGS!! • SURPRISE! FINALLY LOWE...
DYNO TUNING My Mercedes CLK500 at RaceIQ Performance!
• FINALLY DYNO TUNING My...
5 Things I Love About My Mercedes CLK500
• 5 Things I Love About ...
How To SUPER CLEAN Your Engine Bay [Mercedes CLK]
• How To SUPER CLEAN You...
INSANE 500WHP & 600Ib Torque Mercedes Sl55 Amg After RaceIQ Dyno Tune!!
• Riding In My Friend's ...
Nice Job. I have a similar set-up on my CL. Replacing the factory elbow with a silicone one will also increase whine and power.
Are you talking about the y pipe that connects to the TB?
Yeah- a smooth silicone one also increases the whine. The ribs in the factory pipe cancel intake noise a bit.@@HeyboysGarage
I was looking for that. Where did you get a silicone one?
Amazon , everything is linked and said in the video@@Frankie_Freedom
@@RealDougFields Meant to reply to you, I've looked for that Y split silicone one, can never find it by itself
I’d drink my orange juice through those intakes! So pretty
Been there done that already boss
Sounds great! When in drop the top in my SLK I can hear it like crazy! I hope you get a pulley I would love to see how big of a difference it makes. PS My supercharger sounds the best leaving from a stop in second gear using comfort mode.
Fueling b4 smaller pulleys always
Upgraded fueling before smaller Pully. Why is that?
I would have to try that in W mode then which is the same as comfort mode. I will for sure be getting a smaller Pully and a tune with it
@@HeyboysGarage Smaller pulley without good fuelling can risk of leaning out the motor, you need a good fuel mix to cool the pistons also, which equals to more power
@@TheGoldsSkullsClan Stock fueling is enought for a 64mm pully and a tune
Should stay with the stock setup for max performance… the aluminum setup is only good for sound/SC whine, but not performance. Plus they heat soak like crazy…
Those intakes are dyno proven to flow less than the factory intakes with high flow panel filters.
I had the same aluminum “Needs Wings” style intake with the Spectre conical filters on my E55 and I went back to the factory intakes with pro dry high flow panel filters. My buddy with a 10 second E55 also went back to the factory intakes.
So that “15 hp” gain claim is all BS lol
Facts, I went a different route and used the full e55 amg stock intakes (custom fit) with dry drop ins on my c32, these should make the most power on the c32.
It’s interesting because I have heard off this problem with the E55 losing power but the opposite for the C32 because of the stock air box being really restrictive. Let me know why the C32 is losing power with more air in the system. You mentioned heat but I want to know why other than just because of heat soaking
05 crossfire guy thanks for the info keep it up
You got it!
Hey man all the piping and the intake tube and then the silicone tube did you buy 2 pipes 2 intake tubes and 2 silicone tubes ???
Thinkin about copying your setup
Yeah I bought 2 pipes and 2 intakes tubes and the 2 silicone. I'm pretty sure I said all this details in the video
Quality 🤙
🤘🏾
Hey hem, I have a 07 c230 Benz and I’m on stock suspension, would 19x8.5 wheels fit?
Yes they will fit!
Yoo thanks for replying appreciate it man
I also was looking at 18x8.5 what tire size would you recommend?
255/35/18 rear
225/40/18 front
But you can switch it up with your preference for the front width
@@HeyboysGarage thanks bro, much appreciated
Did you swap the Y pipe for a different one?
Yes, the stock y pipe is very restrictive!
@@HeyboysGaragedo you know the part number?
@@premierautomodz7854 Use any M113k Y pipe
I have a 07 cls550 , i wanna put a custom
Intake what should i go for?
The factory intake with high flow panel filters is best. These aluminum intakes heat soak and make less power on the dyno than factory.
I’m not sure which company makes aftermarket intakes for the cls550. I haven’t seen any from owners.
@@speedracerjeff what filter would you recommend ??