Solution Found : The resolution for the repair involved replacing the Hall sensor located within the display. This component was found to be shorted, which disrupted communication between the controller and the display, leading to an incorrect "Error 06" message instead of the expected throttle-related error code. Replacing the Hall sensor successfully restored proper communication and resolved the issue.
@@jayfried9379 change display. try to test with same model but a good display so you can identify if error is from display and not the controller or any other connectors. Many LCD are same but inside are different. Test with exact same model.
@TheAladarr I have already changed the display but if I change something in the p-settings they are not adopted by the controller I hope I can find on aliexpress the same Display
asa am facut si eu. pus un display de la kult si a mers perfect. Dupa 1 saptamna am reparat si display-ul, era o problema de la senzorul de acceleratie. am inlocuit si totul e bine si frumos.
All wires are good and exactly as they should be. Tested with another identical display and all is fine. This one with error 06 has some internal problem. Cannot find what is broken inside.
Sal colegu e 06 insesmna tensiune scazuta a bateriei sau amperaj slab pentru acel controller mai pe romanește o baterie mai puternica te salut de unde oi fi succes
buna. error 06 nu este pentru baterie scazuta. Setarile si erorile difera de la un display la altul. dupa cum scrie si in manual si arat pe video, error 06 este pentru ca display nu mai comunica cu controllerul. Am rezolvat prin schimbare de senzor hall din display. se pare ca senzorul hall nu era ars, ca atunci arata eroare acceleratie, ci era in scurt, ceea ce dadea peste cap tot display-ul si astfel nu mai comunica corect cu controllerul aparand acea eroare 06.
Solution Found : The resolution for the repair involved replacing the Hall sensor located within the display. This component was found to be shorted, which disrupted communication between the controller and the display, leading to an incorrect "Error 06" message instead of the expected throttle-related error code. Replacing the Hall sensor successfully restored proper communication and resolved the issue.
The single white cable is for light connection as far as I know not for throttle grip
it is throttle, tested with another identical display. This one is broken. Searching for a fix.
What do I have to solder or remove in the display to make the error 06 go away?
replace hall sensor
@TheAladarr I replaced the hall sensor but the error did not go away
@@jayfried9379 change display. try to test with same model but a good display so you can identify if error is from display and not the controller or any other connectors. Many LCD are same but inside are different. Test with exact same model.
@TheAladarr I have already changed the display but if I change something in the p-settings they are not adopted by the controller I hope I can find on aliexpress the same Display
Eu problema am rezolvato cu acelasi controller dar alt display
asa am facut si eu. pus un display de la kult si a mers perfect. Dupa 1 saptamna am reparat si display-ul, era o problema de la senzorul de acceleratie. am inlocuit si totul e bine si frumos.
Cable of display you must eliminate the bkeu or the white
All wires are good and exactly as they should be. Tested with another identical display and all is fine. This one with error 06 has some internal problem. Cannot find what is broken inside.
Sal colegu e 06 insesmna tensiune scazuta a bateriei sau amperaj slab pentru acel controller mai pe romanește o baterie mai puternica te salut de unde oi fi succes
buna. error 06 nu este pentru baterie scazuta. Setarile si erorile difera de la un display la altul. dupa cum scrie si in manual si arat pe video, error 06 este pentru ca display nu mai comunica cu controllerul. Am rezolvat prin schimbare de senzor hall din display. se pare ca senzorul hall nu era ars, ca atunci arata eroare acceleratie, ci era in scurt, ceea ce dadea peste cap tot display-ul si astfel nu mai comunica corect cu controllerul aparand acea eroare 06.
Am testat și într-adevăr nu este de pe baterie comunicare lipsa între controller și display ar fi @@TheAladarr
Senzor hall motor no conected
Controller is working with another display, works with or without hall sensor connected. It is a display problem.