Probably one of the creepiest videos I’ve seen in a long time. Why the goose down? But I’ll try this in the morning, a different take on this issue for sure.
Hey, I have a similar problem, HP Prodesk doesn't power on, when I press the power button it turns on a light .... That same light switches off after I release the power button but PC doesn't piwerup
My pc turns on and everything but it doesn’t show on the monitor, it isn’t the display adapter because I tried it on a different pc. The fans in my pc turns on along with everything else but nothing appears and the monitor says that the vga cable isn’t there
My HP pavilion turns on, but the monitor doesn't. The power light on the monitor doesn't turn on and the monitor continues to be blank if I try to turn it on. I've tried three different cords (the ones with the screw things on the sides that needed to be tightened into the computer), and none of them fixed the problem. I can't find anything helpful when I look up how to fix it.
In that case First unplug ram and clean it then plug it (if didn't work) Then power supply or motherboard is damaged or hdd is corrupted, then you need a pc technician for that
Video card, dirty ram, or motherboard itself, could contribute the problem. The easy way to figure out problem is, unplug attached devices one by one, clean the ram slots, blow out the dust, etc.
Looks like yours is not a power problem. Probably need to check on video and PCI bus. HP p6228p motherboard has video, PCI bus, and/or power switch control issues. These issues could cause PC won't start.
@@mkmllrc video card is on motherboard, it's integrated GeForce 9100 video card. It looks like RAM has problem. Make sure the RAM chips attach firmly on slots. You should hear click when RAM chips plugin firmly.
I have the hp pavilion and it cuts on, but sometimes its a orange led on the power button and a beeping sound or no led at all, but the fans spin, and I can’t cut it back off through the button, i have to unplug the pc for it to cut off, and theres no display on the monitor, what can i do to fix it, i need it fixed by Christmas
It could be the videos card problem. Since most of the HP pavilion PC has video integrated on motherboard, you may try take the approach as this video shown, see if the problem can be fixed. If not, then the on board video card is dead.
Sir my hp computer won’t turn on and when it does the fun just spins. When I try changing the ram it turns on but moves slow.can you please help me out
Details of ram requirements: Dual channel memory architecture Four DDR2 SO-DIMM (240-pin) sockets Supported DIMM types: PC2-6400 (800 MHz) PC2-5300 (667 MHz) Non-ECC memory only, unbuffered Supports 4GB DDR2 DIMMs Supports up to 16 GB on 64-bit PCs Supports up to 4 GB* on 32-bit PCs 32 bit PCs cannot address a full 4.0 GB of memory.
SciTechPrelude now I have a problem where when I was playing my game, then my monitor Turned yellow. Then I force shut down my pc and then the fans and light on the power button is flickering, by the way my pc is the HP Pavillion Desktop 570-p054 pls help I’m so confused what happened.
Yeah, the problem shown in this video could be related to probably the one defect in motherboard design in certain model(s). That's why some have the problems fixed, but others don't.
It actually worked you just saved my job lmao thank you
My pleasure!
Thanku so much , it worked for me.
Probably one of the creepiest videos I’ve seen in a long time. Why the goose down? But I’ll try this in the morning, a different take on this issue for sure.
Knowing COMPAQ, know how to fix those motherboard(s).
Thank you sir, even though it was a bit confusing it helped me fix mine.
Glad it helped
Hey, I have a similar problem, HP Prodesk doesn't power on, when I press the power button it turns on a light .... That same light switches off after I release the power button but PC doesn't piwerup
The same problem. What did you do?
@@EdieZone08 remove all the Power supply cables from the motherboard and plug them back after some seconds
I will try it later. I'll have you some update. 😊
It didn't work 😩
@@EdieZone08 unplug CPU cable and plug it back, if this doesn't work now i don't know
Hooooo thanks man this video 👍👍👍
No problem 👍
There is green light showing in my board when I plug in the power cable but the power button doesn't respond not the fan spinning
Did you check the power box? I would check the power box first.
If power box is OK, try unplug power cable from PC back, then push the power button for 30 seconds. Plug power cable back, try power on PC.
This worked for an HP EliteDesk 800 G2 desktop tower. Problem was Power light would stay on when button held, but desktop never booted drive.
Glad to see the problem solved.
My pc turns on and everything but it doesn’t show on the monitor, it isn’t the display adapter because I tried it on a different pc. The fans in my pc turns on along with everything else but nothing appears and the monitor says that the vga cable isn’t there
Did you check you monitor vga cable? I mean the vga cable pins, make sure they are good.
Mine will not open when I lift the handle and pull it. I have unscrewed everything and it still won't budge
😭...😂.... 😭same thing happing to me...
Best
Hey robot
My HP pavilion turns on, but the monitor doesn't. The power light on the monitor doesn't turn on and the monitor continues to be blank if I try to turn it on. I've tried three different cords (the ones with the screw things on the sides that needed to be tightened into the computer), and none of them fixed the problem. I can't find anything helpful when I look up how to fix it.
you might have a bad video card. In fact HP pavilion p6228p has a poor motherboard M2N78-LA (Violet)
same, my screen is completely blank but my PC is turned on
@@mkmllrc same wtf
@@UpwardOpossum9 I just fixed it already, you need to clean your RAM and remove the dust
@@mkmllrc bruh it wasn’t even that it was the psu it died
Hey man i have a hp pc envy , it does not start up completely the fans are on but i cant see anything on the monitor what could it be wrong ?
In that case
First unplug ram and clean it then plug it (if didn't work)
Then power supply or motherboard is damaged or hdd is corrupted, then you need a pc technician for that
@@Aalu-Bhujiya thanks , it was the ram it was dirty
Video card, dirty ram, or motherboard itself, could contribute the problem. The easy way to figure out problem is, unplug attached devices one by one, clean the ram slots, blow out the dust, etc.
This is the problem I have if only I had listened to my dad and refreshed it and turned it if from the screen
Did you fix the problem?
The light is on mine, the fan spins then stops and keeps doing that without powering on.
Looks like yours is not a power problem. Probably need to check on video and PCI bus. HP p6228p motherboard has video, PCI bus, and/or power switch control issues. These issues could cause PC won't start.
Same you got solution yet
How do i fix the pc when i open it ring and thats all the ring sounds ting ting ting
I have same problem did I fix. If so how
My CPU and FANS are on but the screen are completely blank on my 6300 Pro Compaq
Did you check your video card?
@@scitechprelude5380 I dont have video card but I tried cleaning the RAM and put it back on, When I ran the PC it keeps doing the Windows loop.
@@mkmllrc video card is on motherboard, it's integrated GeForce 9100 video card. It looks like RAM has problem. Make sure the RAM chips attach firmly on slots. You should hear click when RAM chips plugin firmly.
God Blesss youuuuuuuu 😱😱😱
@MichaelKingsfordGray NO CAP
I fixed it a different way I took all the cords out and put them back in and it cut on
Good to hear that!
Mine won’t turn on
@@voidjacody5640 like switch them to cords that are connected and turn it on and push them all the way
I don't think I got a cmos power
How do you know you didn't get CMOS power? Setting of jumps is critical for clearing CMOS.
I have the hp pavilion and it cuts on, but sometimes its a orange led on the power button and a beeping sound or no led at all, but the fans spin, and I can’t cut it back off through the button, i have to unplug the pc for it to cut off, and theres no display on the monitor, what can i do to fix it, i need it fixed by Christmas
It could be the videos card problem. Since most of the HP pavilion PC has video integrated on motherboard, you may try take the approach as this video shown, see if the problem can be fixed. If not, then the on board video card is dead.
Still not working
Maybe it's power supply unit problem? Have you checked it yet?
Sir my hp computer won’t turn on and when it does the fun just spins. When I try changing the ram it turns on but moves slow.can you please help me out
It sounds like your PC has RAM issue, either compatibility or RAM defect.
Will new ram do the trick
@@rastunchi2296 New ram must be compatible. That is DDR2 Speed: PC2-6400 MB/sec
Details of ram requirements:
Dual channel memory architecture
Four DDR2 SO-DIMM (240-pin) sockets
Supported DIMM types:
PC2-6400 (800 MHz)
PC2-5300 (667 MHz)
Non-ECC memory only, unbuffered
Supports 4GB DDR2 DIMMs
Supports up to 16 GB on 64-bit PCs
Supports up to 4 GB* on 32-bit PCs
32 bit PCs cannot address a full 4.0 GB of memory.
Thanks
Hello, when I unplug the power supply cable and plug it back in and power it the light turns on and off and the fans turn on and off
Do you mean the PC power went on then off again? If that was the symptom, you'd better check on the power supply box itself.
I realized my memory sticks werent put in correctly, so i took it out and pushed it correctly down. lol
Good to know that!
SciTechPrelude now I have a problem where when I was playing my game, then my monitor Turned yellow. Then I force shut down my pc and then the fans and light on the power button is flickering, by the way my pc is the HP Pavillion Desktop 570-p054 pls help I’m so confused what happened.
@@scitechprelude5380 hey How do i fix the pc when i open it ring and thats all the ring sounds ting ting ting and it does not turn on
My HP computer. ...now very slow ...
PC runs slow could be many reasons, such as RAM, hard disk drive, file system fragmentation, and PCI bus, etc.
maybe add ssd to the pc
Nope did not work
Yep me too
Yeah, the problem shown in this video could be related to probably the one defect in motherboard design in certain model(s). That's why some have the problems fixed, but others don't.