We’ll done. I have seen quite a few of these side cabinets attached to the side like this. Perhaps US General should take note and do this in the factory. Great job and thank you for posting.
Beautifully done, my friend! I just bought this setup for my home. I'm glad I came across your video because the one I watched before this was a hatchet job...like it looked like he actually tried cutting it with a hatchet, then beating it back into place. THIS is how I'm putting mine together tomorrow. Thank you
This is awesome. i've never seen this combo. I've seen people double up the 5-drawer or I've seen them hang the side cart on the full-bank. This looks great. I hope it's still working for you!
Thank you! It certainly is working for me. I still don’t even have all the compartments full. It’s really nice to know exactly where everything is. It’s been awesome.
Awesome job! I have the same cart in white, and will be doing this over xmas break. Also, if my wife caught me grinding in the kitchen, she'd wring my neck. How'd you get away with that?
I stumbled on your video. Looking for a Harbor freight magnet can holder for My Snap-on tool chest. Your video got My attention when I seen You grinding metal in Your house. Awesome video.
A guy who modifies and cuts his steel cabinet in the kitchen of his house, is a man’s man, king of his castle, or single?!?! 😂 Great video and I’ll be doing this mod, safely in the garage
@@WorkingWithWimberley By any chance, do you know if on the 26" US general series 2 box, can you switch out some of the smaller depth drawers with the bigger ones? Like order replacement drawers and swap them? im liking the 26" and would defintely add the top chest but it just has too many small 3" drawers and would like to have at least 4-5 deep drawers. I would add the end cabinet too to complete the whole toolbox but then the width of the end cabinet is too small lol. Any ideas? thanks and awesome job on the mod bro looks super clean. Think you can do the same to the 34" 6 drawer? cuz I have one but would be pretty awesome to add an end cabinet to it haha
I’ve actually received the same comment several times. I haven’t had any issues without adding wheels to the cabinet, but I’m sure you could if you wanted to.
Does the edge of the tool cart handle the weight of the cabinet well or does it get slight bents on the edge of the cart where you hooked it up from the beginning? also awesome video
I have a five drawer box for work and I was thinking of getting the side cabinet and welding them onto a plate of metal so the backs can be level along with making the opening into a cabinet and moving the wheels. To the corner of the plate since I use a forklift to bring my toolbox around
I bought the same cabinet but I didn't cut my top. I mounted my side cabinet to my 5 drawer cart using spacers. Worked out real good. Didn't have to butcher my cart.
Might be better to have the cabinet lined up flush on the backside. Then the surface top lines up when the lids shut and it can sit against walls farther back. Depends on your setup ofc. Either is a big upgrade
Good job. I have never had to do any mods to any of the big box trucks, maybe a couple holes to secure it. Why would US General build add on that needs to be modify to fit?
It’s feels fine to me. My cabinet isn’t full. I’d say it’s about 40% full. It feels stable. As far as moving it around, it was tough with the two fixed wheels. (It comes with two swivel and two fixed) After I changed them to swivel wheels, it’s easy to move around. ruclips.net/video/MLQFAYy5euI/видео.html
Some tape would of helped get a cleaner cut. But thanks for showing exactly where the cuts are needed. Some other videos not show this, they just say they cut here and there. Nice box
I used a random green paint from Home Depot that didn’t match that great, but it’s such a small area that it isn’t really noticeable. I’m sure you could find a better match. Thanks! 😂
It is awkward to push with the two stationary wheels. Most people swap them with swivel wheels. After that, it’s easy to push around. That’s what I did. I haven’t had any issues pushing it with tools in it. Here’s a video on it: ruclips.net/video/MLQFAYy5euI/видео.htmlsi=LpKlz1k-aRhfzDiW
I just bought one of the 5 drawer tool boxes for work and after seeing your video with the side cabinet, I’m adding that too! Great video and you didn’t butcher the box in the process!
Thanks! If you’re careful, you could make even smaller cuts than what I did. It’s super convenient having the extra storage. I was just literally working on it a second ago!
@@WorkingWithWimberley Thanks for the heads up on that. They are $279. I got the 5 drawer tool cart on the 12 day Christmas sale for $189 plus tax, it showed up at the store today. (Slate Grey) I'll have to see if the cabinets go on sale at a deep discount before I jump on one.
GM , I have seen alot of these side cart mod videos ... and I like yours best , well done .. do you think I could add lockers to both sides ? thank you
@@dazeh8 It’s been holding up great! I use it all the time. The only thing is that it usually stays in the same spot in my garage. I don’t roll it around a lot. I could, I just don’t need to. So it’s been great/
I haven’t had an issue with it tipping, but it’s possible if you load up the cabinet with a lot of weight especially if the cart doesn’t have a lot of weight in it.
I've always liked this mod- though I wonder why no one adds 2 castors onto the outer corners of the end cabinet? I think it would help stabilize the whole thing and give more support to the end cabinet once it's fully loaded with tools... Just a thought.
Nice video with simple instructions. Thanks! How is the stability? I'm concerned that too much weight in the side cabinet will make the whole thing tilt. I guess if that becomes an issue you could maybe add two casters to the bottom of the side cabinet.
It was heavy on the cabinet side when it was empty. After I put some tools in the mechanic cart portion, it’s been fine. But I always make sure to push it slowly and carefully. So far so good!
@@WorkingWithWimberley gotcha, I've seen other say that's a worth while upgrade. I'm waiting to see if the basic tool list I was provided is comprehensive enough or if I'm going to need more than the basic 5 drawer carts.
Nice work! I have the same 5-drawer cart for all of my bicycle specific tools and parts. The end piece for me would be great for a small worktop space and additional tool storage!
If the drawers are anything like the 5 on the main cart then you can remove them to make it a lot more manageable by yourself! Just pull one plastic tang down and the other up and it should slide out.
How do you have less than 50,000 views on this video??!! That was the most awesome hack I've seen for a harbor freight product. I was going to get the new series 3 42 inch cabinet, but now I think I might try this instead. Thank you so much!!
Might recommend to add some castors before filing that bad boy up, it's definitely gonna be a challenge balancing if filled to capacity. Just Saiyan...
I'm considering adding the same item to my cart. Can I ask how the balance is assuming that you've filled the end cabinet with tools. How easily and stable does it feel when you move it? I'm thinking you could easily have 75-150-250lbs+ in it.
Nice mod! Thanks for putting this up, looks like I have yet another project in the near future. And as others have pointed out; props for doing it in the kitchen
You are lucky, you must have bought that end cabinet at the right time. Always out of stock at my harbor frieght. Nice clean job. Only this I would do is add one caster to the end cart to disperse the weight if you load up the side cab.
Come on Tru! You know better than that. I recorded this weeks ago. The tool cart is already in its proper place in the garage. Look at the thumbnail picture. But when I originally did this, I put the ramp up to my deck and had my wife help me guide it down. I had to play it safe! 👌🏽
Nice Job I checked the price of the end cabinet and it cost more than the Tool cart the cart was $239 and end cabinet is $279 but still cheaper than Snap On 👍
how balanced is the cart with the end cabinet on there ? I've got the cart and dont wanna spend the money on more storage unless im gonna get a bigger box but this is perfect and thats my only concern with this
This might be a stupid question, but do you know if this will work on a 4 drawer series 1 cart. I'm running out of space in my cart at work, and kind of want to get creative to extend the usage of my current little cart before I need to up to a larger cart or rolling box.
I’m not sure. Your best bet would be to check the dimensions of the side and see if they are the same. I haven’t seen anyone do it on the 4 drawer, but that doesn’t mean it’s not possible.
![OsamaSon - ik what you did last summer [Official Music Video]](http://i.ytimg.com/vi/4DIQDnu3mr4/mqdefault.jpg)
My dude is cutting and grinding metal in his kitchen! Respect!
My wife was cool with it although I did clean up after myself! 😂
I was going to say he must live alone 😂
@@harrynutsack5173 First off, hilarious username! And my wife is an angel, so I got away with it.
Great video man! Made it look super easy and explained it really well
Cabinet on each side would be freaking awesome
I’ve never seen anyone do that. It would definitely be something to see!
@@WorkingWithWimberley thinking the same thing cuz ultimately it might be cheaper than that 44 in lol
@@Cbsaiyan I can tell you that the setup I have has been awesome. Much better than what I had before. It’s not cheap, but it’s worth the money.
I have one with the end cabinet on both sides
Beautiful cabinet!!!!!
We’ll done. I have seen quite a few of these side cabinets attached to the side like this. Perhaps US General should take note and do this in the factory. Great job and thank you for posting.
That would be a good idea. It would save us some work! I’m glad the video helped!
Beautifully done, my friend! I just bought this setup for my home. I'm glad I came across your video because the one I watched before this was a hatchet job...like it looked like he actually tried cutting it with a hatchet, then beating it back into place. THIS is how I'm putting mine together tomorrow. Thank you
😂 You’re welcome! I’m glad the video helped! 2 cuts is all it takes.
I saw that shit too 🤣
This is the cleanest install I have seen from all the other videos on RUclips. Great job!
Thank you! Much appreciated!
I would agree!!! Seen enough to ask, why not buy bigger box. Saw this one video and now looking at this set-up.
Great job. I would’ve loved to see it after the clean up with the touch up paints. I’m sure this will help a lot of people!
You can see it in the garage. Thank you!
Awe. Adorable.
@@IMKINDOFABIGDEAL13 😂 Thanks.
Been wanting to do this to mine. Thanks for showing how this is done
You’re welcome! I’m glad the video helped!
This is awesome. i've never seen this combo. I've seen people double up the 5-drawer or I've seen them hang the side cart on the full-bank. This looks great. I hope it's still working for you!
Thank you! It certainly is working for me. I still don’t even have all the compartments full. It’s really nice to know exactly where everything is. It’s been awesome.
Very nice. I love seeing these types of mods. I never thought to put an extra cabinet on the roll cart.
Thanks! It’s really useful.
Badass, nice and clean job ,now im gonna get that side cabinet all your fault for showing us how to do it,😂,thanks.
LOL! You're welcome! Try to catch them on sale if you can.
Looks good going to getting a end cabinet for my 44” box I just got
Thanks! That’s awesome. The tool cart has been great since I’ve had it.
Awesome job! I have the same cart in white, and will be doing this over xmas break. Also, if my wife caught me grinding in the kitchen, she'd wring my neck. How'd you get away with that?
Don’t ask for permission, ask for forgiveness. 😂😂😂
Nice work and good ingenuity
Thanks! The tool cart has been awesome to have in the garage.
Well done.
Thank you!
I stumbled on your video. Looking for a Harbor freight magnet can holder for My Snap-on tool chest. Your video got My attention when I seen You grinding metal in Your house. Awesome video.
Thanks lol! I’m glad you got something out of the video.
you did a awesome job i may just have to go to harbor freight and get one of those end cabinets!!!!
You’re welcome! I’m glad the video helped! I really like this setup. It’s much better than what I had before.
Nice mod. Great video, right to the point.
Thanks!!!
A guy who modifies and cuts his steel cabinet in the kitchen of his house, is a man’s man, king of his castle, or single?!?! 😂
Great video and I’ll be doing this mod, safely in the garage
😂 I’m happily married and my wife didn’t even give me a hard time about it!
Wonder if it would work with their series 2 mechanics cart along with their series 3 side cabinet.
I’m not sure what the differences are between the series.
Good Job, minimum of work, maximum result!
Thank you!!!
Nice Video , does it seem that you could add a 15” cabinet on both sides ?
@@jeffdavis2026 I think it’s possible to do a cabinet on each side. I haven’t seen anyone do it yet.
I have watched a few of these mods, and you, by far have done the best job attaching the end cabinet of them all!! Excellent job!
Thanks! I’m glad the video helped! Two cuts is all it takes.
@@WorkingWithWimberley By any chance, do you know if on the 26" US general series 2 box, can you switch out some of the smaller depth drawers with the bigger ones? Like order replacement drawers and swap them? im liking the 26" and would defintely add the top chest but it just has too many small 3" drawers and would like to have at least 4-5 deep drawers. I would add the end cabinet too to complete the whole toolbox but then the width of the end cabinet is too small lol. Any ideas? thanks and awesome job on the mod bro looks super clean. Think you can do the same to the 34" 6 drawer? cuz I have one but would be pretty awesome to add an end cabinet to it haha
Big up on the video, insightful and helpful
Thanks! I’m glad the video helped!
wonder if you add wheels to the new cart for added support.
I’ve actually received the same comment several times. I haven’t had any issues without adding wheels to the cabinet, but I’m sure you could if you wanted to.
This is sick man gonna do this!
Thanks! It’s been great to have in the garage.
Thanks! What's the best price you have seen the end cab? It's normally $280, on sale for $251 now. Thanks.
The lowest price I've seen recently was $240 in 2021.
Did you need to move the wheels to support the new cabinet after it was loaded?
No, I didn’t. I kept the wheels in their original location.
I’m impressed
Thanks!
looks good and thanks for sharing!
You’re welcome! I’m glad the video helped!
So wait. Working with Wimberley does metal cutting inside his home?
Not usually. But I did for this video.
I want 2 see that on the series 3
Me too.
No tipping issues? Looks like my next project
I haven’t had any issues, but it’s possible if you overload the cabinet.
Does the edge of the tool cart handle the weight of the cabinet well or does it get slight bents on the edge of the cart where you hooked it up from the beginning? also awesome video
It handles it totally fine. No bends on the edge of the cart from weight.
Nice video! Very helpful
Thanks! I’m glad the video helped!
I have a five drawer box for work and I was thinking of getting the side cabinet and welding them onto a plate of metal so the backs can be level along with making the opening into a cabinet and moving the wheels. To the corner of the plate since I use a forklift to bring my toolbox around
Go for it!!!
I bought the same cabinet but I didn't cut my top. I mounted my side cabinet to my 5 drawer cart using spacers. Worked out real good. Didn't have to butcher my cart.
Ok cool!
got a video or anything of how you did that?
@@SpykeZ0129 I do have a video. Search 10 drawer cart and end cabinet. You should find my videos.
2 small cuts is butchering... ok, Picasso. The cabinet lip over top of the cart is an excellent idea all spacers you're just in the sheet metal.
Might be better to have the cabinet lined up flush on the backside. Then the surface top lines up when the lids shut and it can sit against walls farther back.
Depends on your setup ofc. Either is a big upgrade
Thanks for the tip.
Good job. I have never had to do any mods to any of the big box trucks, maybe a couple holes to secure it. Why would US General build add on that needs to be modify to fit?
It’s because the end cabinets were made to attach to the roller cabinets, not the mechanics cart.
This is why the harbor freight box is better than snap on
Cuz no one would wanna cut and modify a $1k plus box
😂 I totally understand!!!
Hey, I just got a 5 drawer cart and I'm thinking about doing this. was there change in the stability of the cart afterwards?
I haven’t had any issues moving it when I need to. But my cart usually sits stationary in my garage. I don’t really move it that much.
how is does if feel with the cabinet full of tools? Does the extra weight make it want to tip over? Is it more difficult to move around the shop?
It’s feels fine to me. My cabinet isn’t full. I’d say it’s about 40% full. It feels stable. As far as moving it around, it was tough with the two fixed wheels. (It comes with two swivel and two fixed) After I changed them to swivel wheels, it’s easy to move around. ruclips.net/video/MLQFAYy5euI/видео.html
Any problems with the End Cabinet being too heavy causing the tool cart to tip?
@@Remaagen No, I haven’t had that issue. But my cabinet isn’t loaded with a lot of heavy parts.
So i mounted the side drawers and it is crooked with the edges lined up. Im thinking i assembled the cart kind of crooked. Any advice?
I’d loosen the bolts and see if can be adjusted. If not, something must be bent.
I love it nice and simple
Thank you!
Some tape would of helped get a cleaner cut. But thanks for showing exactly where the cuts are needed.
Some other videos not show this, they just say they cut here and there.
Nice box
Thanks for the tip. You’re welcome! I’m glad the video helped!
@@WorkingWithWimberley it sured helped. Keep it up
@@user-fb2jb3gz1d Will do!
Did you have to bend out the lid to get clearance for the cabinet? Watched another channel where he did it and said he had to bend that lip out.
No, I didn’t bend the lid. It fit over pretty well without doing anything. At least it did for me.
@@WorkingWithWimberley awesome! Hopefully it works out that way for me too. Love the video and appreciate the reply.
@@coreysimerson1717 No problem! I’m glad you found the video helpful!
Nice work.
Thanks!!!
With it just being the lip on top holding it will be able to securely hold the addition with tools maximg out the weight
@@bruceatkins2189 I’ve had no issues with it. It’s been great for my needs. However I have not “maxed out the weight” with tools so I can’t say.
Only recommendation I'd make is to add a caster wheel to the end cabinet to help distribute the weight better.
Thanks for the tip!
Good clean install. Can you get matching paint or what paint did you use? Nice shop, looks like the inside of a house. LOL Great video.
I used a random green paint from Home Depot that didn’t match that great, but it’s such a small area that it isn’t really noticeable. I’m sure you could find a better match. Thanks! 😂
Is it tough to roll around filled with tools like that?. I work in a factory where I push my cart a lot..
It is awkward to push with the two stationary wheels. Most people swap them with swivel wheels. After that, it’s easy to push around. That’s what I did. I haven’t had any issues pushing it with tools in it. Here’s a video on it: ruclips.net/video/MLQFAYy5euI/видео.htmlsi=LpKlz1k-aRhfzDiW
Nice ... I am gonna look at doing this to mine . But I aint messing qith Clarence 😅
😂
Where did you score the touch up paint lad
Home Depot. It wasn’t a perfect match, but it was close enough for me.
I just bought one of the 5 drawer tool boxes for work and after seeing your video with the side cabinet, I’m adding that too! Great video and you didn’t butcher the box in the process!
Thanks! If you’re careful, you could make even smaller cuts than what I did. It’s super convenient having the extra storage. I was just literally working on it a second ago!
Excellent! I have to wait two weeks for my side cabinet to come in but I’m excited to get it set up.
@@stacyl8627 Awesome! Hopefully it’s comes in sooner.
wonder how it would work if you out one on each side to distribute the weight better?
Possibly. I haven’t seen anyone try that yet.
I would pull three bolts off the vertical legs, drill through to the side cabinet, and bolt the two together.
Ok thanks.
How'd it hold up? Any further reinforcing needed when weighted down?
So far it’s been great. I haven’t had any issues with it. But I don’t have a ton of heavy stuff in the cabinet.
That's a VERY good idea. Unfortunately that cabinet seems to be no longer available. Bummer !
I believe the U.S. GENERAL 15 in. End Cabinet, Series 3 is the replacement. That should work too.
@@WorkingWithWimberley Thanks for the heads up on that. They are $279. I got the 5 drawer tool cart on the 12 day Christmas sale for $189 plus tax, it showed up at the store today. (Slate Grey) I'll have to see if the cabinets go on sale at a deep discount before I jump on one.
👍
Now add unit on the other side to hand wlding helmets and shirt/jacket/boots and you have a nice shop box.
I’ve had several comments about that. I haven’t seen anyone do it yet though.
GM , I have seen alot of these side cart mod videos ... and I like yours best , well done .. do you think I could add lockers to both sides ? thank you
I haven’t seen anyone do that, but it should be possible. You would need to relocate the handle too.
I wonder if this would work for the service cart?
I haven’t seen anyone try on the service cart yet.
May need to secure it more depending on the tools you have in it
So far I haven’t had any issues, but I agree that more securing would definitely be better.
Compared to the other videos of this process, yours is much more clean and precise; I try to run my shop equipment the same way so it's nice to see!
Awesome!! Thanks! And you can even do smaller cuts than what I did. There’s no need to hack up the cart and cabinet. 👍🏽👌🏽
Do you have an update on the set up with tools and how it’s holding up ?
@@dazeh8 It’s been holding up great! I use it all the time. The only thing is that it usually stays in the same spot in my garage. I don’t roll it around a lot. I could, I just don’t need to. So it’s been great/
Yooo, using a grinder inside the house??
Yes. I used a cut off wheel in my house.
Does it tip forward? cause of the weigh
I haven’t had an issue with it tipping, but it’s possible if you load up the cabinet with a lot of weight especially if the cart doesn’t have a lot of weight in it.
great job and looks nice, only concern is the weight of the cabinet without anything supporting the bottom.
Thanks! So far I haven’t had any issues.
Cut off grinder in the house..Love it!
Yeah, it wasn't the best idea but it worked out! 😂
I've always liked this mod- though I wonder why no one adds 2 castors onto the outer corners of the end cabinet? I think it would help stabilize the whole thing and give more support to the end cabinet once it's fully loaded with tools... Just a thought.
That’s a good idea. The cabinet sits a little higher than the cart. You’d just have to add spacers. But it should work.
Does this by any chance work with the double stacked box?
I’ve never seen anyone do it. If you’re suggesting putting an end cabinet on each side, I suppose it could work.
Will this work with the 4 drawer cart, or will it only fit the 5 drawer one?
I’m not sure. I haven’t seen anyone try with the 4 drawer.
Nice video with simple instructions. Thanks! How is the stability? I'm concerned that too much weight in the side cabinet will make the whole thing tilt. I guess if that becomes an issue you could maybe add two casters to the bottom of the side cabinet.
It was heavy on the cabinet side when it was empty. After I put some tools in the mechanic cart portion, it’s been fine. But I always make sure to push it slowly and carefully. So far so good!
Awesome
Thanks!!!
Damn sparks just flyin in the house 😂
Yes! 😂 And my angel of a wife forgave me!
I have 2 mechanics carts now that I use for detailing and I would love to combine them into 1 and get rid of 1. This is a great idea. Thanks.....
You’re welcome! I’m glad the video helped!
Did you upgrade the caster wheels or leave the original ones on?
I ended up replacing the 2 fixed wheels with swivel wheels. It’s way easier to more when all four wheels swivel.
@@WorkingWithWimberley gotcha, I've seen other say that's a worth while upgrade. I'm waiting to see if the basic tool list I was provided is comprehensive enough or if I'm going to need more than the basic 5 drawer carts.
@@alexhenderson3436 It’s worked well for me. I’m actually still trying to fill up all the drawers.
Nice work! I have the same 5-drawer cart for all of my bicycle specific tools and parts. The end piece for me would be great for a small worktop space and additional tool storage!
You’re welcome! I’m glad the video helped! I really like this setup.
Very nice mod....any imbalance issues?
I haven’t had any, but I’d say it’s possible if you load up the cabinet but don’t have much in the cart.
If the drawers are anything like the 5 on the main cart then you can remove them to make it a lot more manageable by yourself! Just pull one plastic tang down and the other up and it should slide out.
Thanks for the tip.
Nice and simple. I have seen some hack jobs.
Thanks!
Love it! How’s it holding up to weight
It’s holding up great! I haven’t had any issues, but honestly it usually stays in the same spot in my garage. I don’t wheel it around much.
How do you have less than 50,000 views on this video??!! That was the most awesome hack I've seen for a harbor freight product. I was going to get the new series 3 42 inch cabinet, but now I think I might try this instead. Thank you so much!!
You’re welcome! I’m glad the video helped! I’m still waiting on my first one million view video 😂. I’m sure it’ll happen one day.
Might recommend to add some castors before filing that bad boy up, it's definitely gonna be a challenge balancing if filled to capacity. Just Saiyan...
Thanks.
Running a side grinder and drilling metal in the house and you still alive to tell about it? Your gf/wife must really love you 🤣.
You are absolutely right! My wife is so good, she actually helped me push it out to the garage when I was done with the mod! 😂😂😂
@@WorkingWithWimberley Theres your sign shes a keeper then 🤣
I'm considering adding the same item to my cart. Can I ask how the balance is assuming that you've filled the end cabinet with tools. How easily and stable does it feel when you move it? I'm thinking you could easily have 75-150-250lbs+ in it.
I haven’t had any balance issues. But my cart usually stays in one spot in the garage and I haven’t completely filled the end cabinet yet.
@@WorkingWithWimberley Thanks. I'd imagine it would be a simple matter of weight distribution
@@richardrush9326 I agree. I’ve had many people comment that they would put wheels under the cabinet part, but I haven’t seen anyone do it yet.
I wonder how it would be with two side cabinets
I haven’t seen anyone try that yet. You could be the first.
How is it when it's loaded
It’s been great for me, but to be honest, it usually stays in the same spot in my garage. I rarely wheel it around.
Nice mod! Thanks for putting this up, looks like I have yet another project in the near future. And as others have pointed out; props for doing it in the kitchen
@@ClanMercer You’re welcome! I’m glad the video helped! It was cold outside, so I did it in the house. 😂
You are lucky, you must have bought that end cabinet at the right time. Always out of stock at my harbor frieght. Nice clean job. Only this I would do is add one caster to the end cart to disperse the weight if you load up the side cab.
Thanks! I purchased this in early 2022 and I did have to order it and wait for it to come in. It didn’t take that long though.
Can’t seem to find this cabinet :(
I believe they replaced it with a 15" end cabinet. www.harborfreight.com/15-in-end-cabinet-series-3-green-70354.html
THIS IS THE BEST THING IVE SEEN ALL DAY
@@FenderShredder Thanks!!!
Next task....getting out the house, down the stairs, through the snow, & into the garage lol
Come on Tru! You know better than that. I recorded this weeks ago. The tool cart is already in its proper place in the garage. Look at the thumbnail picture. But when I originally did this, I put the ramp up to my deck and had my wife help me guide it down. I had to play it safe! 👌🏽
@@WorkingWithWimberley lol I forgot you had the ramp, I thought about it when I got email of your reply XD
@@TruInferno 👍🏽👌🏽
I fk this I think ima do it this weekend
@@Vettespeed Ok cool!
Where did you find the end cabinet at??
I purchased the cart and end cabinet from Harbor Freight.
You’re wife is gonna get you!
😂 My wife is a sweetheart. I didn’t get in trouble at all. She actually helped me push the cart out to the garage.
Nice Job I checked the price of the end cabinet and it cost more than the Tool cart the cart was $239 and end cabinet is $279 but still cheaper than Snap On 👍
Thank you! I use it a lot!
I hung my end cabinet on my cart with brackets I made, this way there is no cutting involved.
Great!
how balanced is the cart with the end cabinet on there ? I've got the cart and dont wanna spend the money on more storage unless im gonna get a bigger box but this is perfect and thats my only concern with this
I haven’t had any issues. But if you load more weight in the cabinet than the cart, I would guess it could become unstable.
This might be a stupid question, but do you know if this will work on a 4 drawer series 1 cart.
I'm running out of space in my cart at work, and kind of want to get creative to extend the usage of my current little cart before I need to up to a larger cart or rolling box.
I’m not sure. Your best bet would be to check the dimensions of the side and see if they are the same. I haven’t seen anyone do it on the 4 drawer, but that doesn’t mean it’s not possible.
The 4 drawer art is substantially less deep. I think not a good idea.