Thank you Jeff! I'm a novice compared to what you know! Thank you for starting your channel! I'd give a serious look at these US General Series 3 boxes. They are very good for the money.
My 10 year old helped me mount my 22" end locker. He was in charge of the jack. He let it down too fast also but everything worked out lol. He was happy to participate.
I did my 26,44 and side drawer assembly myself. I found pulling all the drawers out made it so much easier to complete the tasks... Didn't click off nor fast forward nice setup . Enjoyed the vid... being staged gets boring like a lot of cut up modded vids people undo the errors and mistakes they make. keeping it real makes the videos better..
@@DemoDad101 I only ask cause from video and photo the series three looks like they have a different shade of blue. HF near me don't have the smaller top chest in blue.
Nice setup. I recently bought a 56 inch roller and would have more use for a top hutch.. id like to add the 15 inch side box and see if a 72 inch hutch would fit on top. I figure with a 1/2 plywood spacer i could bolt the top on securely. Any thoughts?
I have the 56" box with the hutch, the end locker and this drawer unit. And you quickly realize how easy it is to run out of room lol. But so far its been a good box. We'll see
whats crazy is you can buy the 56 USG series 3 box and the 27inch and they bolt together giving you 83 inches and ITS STILL CHEAPER than the 73. Its so stupid
They don’t really bolt together. They are different heights. You would need to make a spacer for the wheels. Then, you would only be able to bolt the bottoms together. The top holes on both sides are threaded for the handle. The 42 and 27 are the same height. The 72 and the 56 are the same height. Not sure why they designed them this way.
@@DemoDad101 i know the difference in height is the casters, thats easily solved by ordering casters for the 56 and putting them on the 27. You can also remove the drawers and drill holes for bolts on the top of the two boxes to make up for the lack of pre drilled holes for bolting the box together. I get its not completely practical but for most people who are looking at purchasing these they are probably all capable of doing it.
Currently the pricing on the bottom 56" chest is literally half of the 72" so you could buy two 56" bottoms, and one top chest for less than a 72" single bottom and top. OR, for only $100 more than a full 72" set, you could get two 56" bottoms, one 56" top chest, and one 56" hutch 😂
Be really careful with the end box. As you know its held on by the lip and gravity. My old Craftsman box has one of those on each end. I was loading it on a trailer and when it came down the ramp of the trailer the end cabinet hit the ground lifting it off the end of the big box. It fell off landing on its back, then that end was now light, it came off the ground and the other end cabinet went down. That lifted the other end box off and it fell off landing face first. That caused the big box to end up on the caster end wheels, it rolled back on the caster wheels and it ended up on its back on the trailer ramp. Of course I was in the middle of a move to Ohio for the USAF. It was in the middle of winter the ground was covered in ice and snow and I was by myself and with three toolboxes that were full of tools laying scattered on the ground and trailer door. It was a three stooges moment in time. I just bought the exact same setup in Chevy orange, its being delivered on the 28th of January.
I thought they were just hanger without bolts. The bolts would stop what happened with mine. I hope my new setup works out for me also. First new full size tool box since 1983. @@DemoDad101
This would have been a lot easier if you removed the drawers. I got my 56" roller cart home the other day and bumped my head on the wall for a couple hours about how I was gonna get it off my pick up truck till I watched a youtube video where he took the drawers out and cut the weight in half more or less.
Couple minutes in, so maybe you explain this later...but in the last video of yours I watched, you talked about getting a 42" instead of the smaller end cabinets, and how that would make more sense. Can you explain your mind change? I thought that was actually brilliant, so I don't understand why you went this way.
I didn't go that route because I discovered that the 42" uses smaller casters. That means it wouldn't be on the same height level and it would look goofy. I really only needed the end cabinet. If the casters were the same on the 42"...I would have went that route for sure. Perhaps you can order the 56" caster set and put them on the 42" and bring the height up.
@@DemoDad101 I see. Well, I started with what turned out to be a 'series 1' 42" bottom and top my Father bought me some years ago. Earlier this year I decided to buy a locker...but it was incompatible with the series 1...so bought a series 2 54", put the old top on it, then put the drawers on the end, and the locker on the other end. Now I have a newer bottom, with an old, smaller top, but room to put a small compressor on, so it turned out real well. Then, bought another 54" series 2 when they were selling them cheap....soooo many toolboxes.....lol
Love the color,I need more storage myself,I have way to many tools!! You got a very nice channel my friend!!!
Thank you Jeff! I'm a novice compared to what you know! Thank you for starting your channel! I'd give a serious look at these US General Series 3 boxes. They are very good for the money.
Very nice set-up. I really like the blue.
Was nice to see your son helping as well. Great vid!
Thank you! He is enjoys helping out.
My 10 year old helped me mount my 22" end locker. He was in charge of the jack. He let it down too fast also but everything worked out lol. He was happy to participate.
I love having my kids help me out. However, they do slow things down a lot and my wife doesn’t like them being on the internet.
I did my 26,44 and side drawer assembly myself. I found pulling all the drawers out made it so much easier to complete the tasks... Didn't click off nor fast forward nice setup . Enjoyed the vid... being staged gets boring like a lot of cut up modded vids people undo the errors and mistakes they make. keeping it real makes the videos better..
Thank you! I do a tiny bit more editing now than I did when making this video. Basically, if the footage doesn’t advance the story… I just cut it out.
Thanks for sharing I purchased the slate gray. Not sure how I'm going to get it off my mini pickup when I get it home.
How did you end up removing it from the truck?
I love unboxing! Its fun tonsee other buying things they like because i feel the same when im opening a new box
Great video. I have a 56" series 3 box and while it has a lot of great room, I was thinking about doing the 15" side cabinet. I like the way it looks.
I am a fan! I actually returned it and have a different setup now. That will be a future video.
You can tell ur son is like move dad I got this lol
Aren’t they all like that lol?
I grew up working in a shop I’m 15 now and I’m pretty confident I could do a ls motor swap by my self
That’s awesome!
Looks good, we chatted about the setup, I like this as well. Keep mostly house tools seperate. Lock my tools, keep that one open for random tools 😂
Gotta have a place to lockup tools the wife hasn’t seen yet!
I just ordered the 56in with top chest 😊 cant wait
Great choice!
Is the series 3 blue a different shade of blue then series 2 blue?
Great question! I don’t know. To my eyes…they appear the same.
@@DemoDad101 I only ask cause from video and photo the series three looks like they have a different shade of blue. HF near me don't have the smaller top chest in blue.
Nice setup. I recently bought a 56 inch roller and would have more use for a top hutch.. id like to add the 15 inch side box and see if a 72 inch hutch would fit on top. I figure with a 1/2 plywood spacer i could bolt the top on securely. Any thoughts?
The hutch (or top chest) doesn’t bolt to the box. It just rests on top. But yeah, that will probably work well.
I have the 56" box with the hutch, the end locker and this drawer unit. And you quickly realize how easy it is to run out of room lol. But so far its been a good box. We'll see
I've got more room than I know what to do with right now lol. I know it won't always be that way. I really wanted to future proof my setup.
whats crazy is you can buy the 56 USG series 3 box and the 27inch and they bolt together giving you 83 inches and ITS STILL CHEAPER than the 73. Its so stupid
They don’t really bolt together. They are different heights. You would need to make a spacer for the wheels. Then, you would only be able to bolt the bottoms together. The top holes on both sides are threaded for the handle. The 42 and 27 are the same height. The 72 and the 56 are the same height. Not sure why they designed them this way.
@@DemoDad101 i know the difference in height is the casters, thats easily solved by ordering casters for the 56 and putting them on the 27. You can also remove the drawers and drill holes for bolts on the top of the two boxes to make up for the lack of pre drilled holes for bolting the box together. I get its not completely practical but for most people who are looking at purchasing these they are probably all capable of doing it.
@@CarRimRodToo much work and parts swapping man, the savings are partially gone. If you want 72 just buy 72 and be done with it.
Currently the pricing on the bottom 56" chest is literally half of the 72" so you could buy two 56" bottoms, and one top chest for less than a 72" single bottom and top.
OR, for only $100 more than a full 72" set, you could get two 56" bottoms, one 56" top chest, and one 56" hutch 😂
Good job you 2! I'm taking a wild guess and say the side locker attaches the same Way?
Yes they do
Just curious what the overall height of that is with the top box lid open?
I’ve have a slew of questions from subscribers that I will be answering in an upcoming video.
These are nice boxes. Finish is really good. Thinking about adding the side box to mine red one. Did you pick up in store or have it delivered?
I picked up the side box in the store. It was the last one in stock!
I see you have Seville HD drawers and wall cabinets. What’s your thoughts about them? Maybe a future review video on them ?
That’s a great idea! I may do that sooner than later!
I've watched a few of your toolbox videos and could i ask how tall you are for a comparison?
I’m 5’9”
Be really careful with the end box. As you know its held on by the lip and gravity. My old Craftsman box has one of those on each end. I was loading it on a trailer and when it came down the ramp of the trailer the end cabinet hit the ground lifting it off the end of the big box. It fell off landing on its back, then that end was now light, it came off the ground and the other end cabinet went down. That lifted the other end box off and it fell off landing face first. That caused the big box to end up on the caster end wheels, it rolled back on the caster wheels and it ended up on its back on the trailer ramp.
Of course I was in the middle of a move to Ohio for the USAF. It was in the middle of winter the ground was covered in ice and snow and I was by myself and with three toolboxes that were full of tools laying scattered on the ground and trailer door.
It was a three stooges moment in time.
I just bought the exact same setup in Chevy orange, its being delivered on the 28th of January.
This one has a lip, gravity and a couple bolts! Still, wise words of caution! Thank you for sharing your thoughts.
I thought they were just hanger without bolts. The bolts would stop what happened with mine. I hope my new setup works out for me also. First new full size tool box since 1983. @@DemoDad101
That's better! 🥰
I didn’t click off just fast forward lol😂😂
I appreciate it!
This would have been a lot easier if you removed the drawers. I got my 56" roller cart home the other day and bumped my head on the wall for a couple hours about how I was gonna get it off my pick up truck till I watched a youtube video where he took the drawers out and cut the weight in half more or less.
I’ve not liked removing drawers. I’ve broken a couple of the release tabs.
Couple minutes in, so maybe you explain this later...but in the last video of yours I watched, you talked about getting a 42" instead of the smaller end cabinets, and how that would make more sense. Can you explain your mind change? I thought that was actually brilliant, so I don't understand why you went this way.
I didn't go that route because I discovered that the 42" uses smaller casters. That means it wouldn't be on the same height level and it would look goofy. I really only needed the end cabinet. If the casters were the same on the 42"...I would have went that route for sure. Perhaps you can order the 56" caster set and put them on the 42" and bring the height up.
@@DemoDad101 I see. Well, I started with what turned out to be a 'series 1' 42" bottom and top my Father bought me some years ago. Earlier this year I decided to buy a locker...but it was incompatible with the series 1...so bought a series 2 54", put the old top on it, then put the drawers on the end, and the locker on the other end. Now I have a newer bottom, with an old, smaller top, but room to put a small compressor on, so it turned out real well. Then, bought another 54" series 2 when they were selling them cheap....soooo many toolboxes.....lol
Take the drawers out next time. Alot lighter to "wrassle" with
I’m always afraid the drawers won’t go back in lol. I had issues with the upper box after removing the drawers to lift it with my tractor.
😬