🛑!CORRECTION!🛑 Slight mistake in the video for measurements: 50 FT = 15.2 M (not 1.52 M) WOE Paracord Store ▶ paracordweavers.com/?sca_ref=6422991.Yrw6WNlrgE GET MY FREE EBOOK ▶ www.weaversofeternity.com/freebook
Do you know that you can flip each loop into a (kind of) cow hitch, bring the new line through, and flip back the new knot, just like you can flip reef knots (square knots in the US) over and back. Same result for much less effort. But I do like your design.
If you are wanting to make this wrap and you do a feel loops, don’t get discouraged by the time it takes for each hitch. It gets better as you go since the rope is starting to get shorter and shorter. Keep going kings. 👑
@@frederiklist4265 If you have the room stretch the rope all the way out and do it like that. What I do is keep making coils on each side of me and untangle as I go.
Started this today. Got the first row of hitches done. What really slows you down is running the remaining 50 foot tail through each loop. I’m dying here! 😵
Definitely. Ive been trying EVERYTHING for cord management What i found is using my toe to hold the cord straight while pulling it through minimizes twisting. But i cant find anything better to do yet
Wrap the cord around yor fingers and tie it off on the middle like a bow. You can pull more cord ar you need it from the bow and still have like 2 ft to work with at a time. You just have to leave the hitches loose enough to pass the whole thing through and then tighten it
Thank you so much for sharing this. I did this today. My first experiment with paracord. The outcome looks fantastic (not as beautiful as yours) and hope it keeps my bottle dent and scratch free. May be, because this is my first time dealing with paracord, it took me a lot of time. Almost 5 hours. It was fun anyways. Thanks.
I really appreciate your video!!! I just finished doing this on my 1 gallon plastic bottle!!! it's my first time learning this and it turned out really cool!!! thank you!!!
This is a really cool way to wrap a bottle! I have experemented with this kind of wrap before because it can also be used to make paracord nets and net bags which is fun to do. Keep up the great content!
Hi! Thanks for the great tutorial, I’m about halfway through. Question, let’s say we’re out in the forest and need some rope for whatever reason, how quickly or easily is it to un-do all the ties on this bottle?
I'm looking to do something like this for the handle of a boat motor, with which you control the speed. I have the feeling this will be a bit to loose to work, but something like this would be great!
Nice Project, very comprehensively presented. Since you might open and close the net frequently on the top: Wouldn't it be better to start with a doubled half hitch? Even with the end molten down I would be afraid that that single overhand loosens with time.
if you carry around fuel bottles in this net, make sure you melt the starting knot and the ending knot into the net. Like plastic welding of some sort ^^ - in the clip, those knots look like they might break if it comes to sudden shocks or constant wear. You would not want those knots to break while carrying fuel bottles.
Hi! Watching from the Philippines! I wanna try this on my 1.8L thermal bottle. I couldn’t find a boot cover for this size. How much para cord do you think I will use for 1.8L ?Many thanks for this very cool video.
I took out a new belt bag for a jog the other day and the crappy little elastic pocket on the bag dropped my bottle ten minutes into my run. Going to use this weave to make myself a thigh holster for my water bottle. Thanks man! 😎
I would make an attachment for the lid to the neck of the bottle as well. I made mine by looping one end to the water can and then making making half hitches with alternate sides after it was 6 inches long, I tied it to the loop part of the lid. This took about 40 inches of paracord.
Another question... Does the bottle stand up right with all the cord on the bottom? It looks a little thick. Do you have other ways to finish the bottom?
This might seem like a weird request... But is there a tutorial in your videos that shows how to make a horizontal belt holster? I wanna make one for my nunchuks 😅
Wonderful use and it looks beautiful. I am going to try it on some of my special glasses cut and polished from painted beer bottles, some of which need to be protected. hat color combination is also a great choice. One could say that you executed to creation without a hitch (LOL), thanks.
I have a 40oz water bottle that I wanted to put on my belt, so I cut part of a pant leg of an old pair of jeans and sewed one end shut and put my water bottle in, I also made a loop by the top for a carabiner.
Yeah...i dont know man. I watched Counter Strike 2 videos ago, took a quick look at how to make cheese with a guy who said g'day curd nerds and ended up with you tying knots with paracord around a bottle. Thats quite a rabbit hole... Nice video btw. See ya next time.
LOVE all of the Incredible items. While I may have the dexterity, sadly, I’m afraid I’m (deficient) in the Patience dept. to make them look as proportionate as yours. Thanks !
There is a little mistake in video. 50ft is not 1.52 meters. It is 15.2 meters. I started to wrap my bottle and after few rounds was wondering that cord is about to end and I'm not even half away. New try with right length of cord. 😅
Que hermosura de trabajo tegido quería preguntarte en el país donde vivo no venden esa aguja cual otra puedo utilizar mil gracias por tu en señanza es muy entendíble y muy bien explicado todo dios te bendiga siempre y te de mucha vida y salud para seguir adelante con todos tus proyectos y sueños
Just a suggestion YMMV try soaking the cord in warm water then give it a mild stretch and let air dry in loose loops, hopefully this will relieve some of the tension induced in the manufacturing process.
🛑!CORRECTION!🛑
Slight mistake in the video for measurements: 50 FT = 15.2 M (not 1.52 M)
WOE Paracord Store ▶ paracordweavers.com/?sca_ref=6422991.Yrw6WNlrgE
GET MY FREE EBOOK ▶ www.weaversofeternity.com/freebook
How much coed did you have left over
thats why im short
Do you know that you can flip each loop into a (kind of) cow hitch, bring the new line through, and flip back the new knot, just like you can flip reef knots (square knots in the US) over and back. Same result for much less effort. But I do like your design.
@@RAMA-gu8cs me to😂😭😭
@@willekevanderham5326 can you give an example this will take hours
This is like manly macrame. Love it!!
That's what my wife says I'm doing.....I tell her it's not macrame it's mancrame! 😁
If you are wanting to make this wrap and you do a feel loops, don’t get discouraged by the time it takes for each hitch. It gets better as you go since the rope is starting to get shorter and shorter. Keep going kings. 👑
@@frederiklist4265 If you have the room stretch the rope all the way out and do it like that. What I do is keep making coils on each side of me and untangle as I go.
Just started wrapping my speaker so I can hook it took my bag! This is gonna take a while
Started this today. Got the first row of hitches done. What really slows you down is running the remaining 50 foot tail through each loop. I’m dying here! 😵
How it go
Definitely. Ive been trying EVERYTHING for cord management
What i found is using my toe to hold the cord straight while pulling it through minimizes twisting. But i cant find anything better to do yet
Wrap the cord around yor fingers and tie it off on the middle like a bow. You can pull more cord ar you need it from the bow and still have like 2 ft to work with at a time. You just have to leave the hitches loose enough to pass the whole thing through and then tighten it
I was thinking the exact same thing. It's gotta take some time.
Starting my second bottle wrap today. The final product is so cool, I decided to make another. I always get compliments on it
This is the best design I could find on RUclips
Thank you so much for sharing this. I did this today. My first experiment with paracord. The outcome looks fantastic (not as beautiful as yours) and hope it keeps my bottle dent and scratch free.
May be, because this is my first time dealing with paracord, it took me a lot of time. Almost 5 hours. It was fun anyways. Thanks.
I really appreciate your video!!! I just finished doing this on my 1 gallon plastic bottle!!! it's my first time learning this and it turned out really cool!!! thank you!!!
How much cord did you need to do a gallon jug?
How many feet of cord!?
That's a great way to have your most useful thing on an adventure. Will it be hard to unwrap the paracord when we need it?
This is a really cool way to wrap a bottle! I have experemented with this kind of wrap before because it can also be used to make paracord nets and net bags which is fun to do. Keep up the great content!
If this is used as a net, let's say to make a bridge, for kids to play with, do the cells remain even or do they widen under weight?
@@d.molina5644 they widen
@@troscar thanks
This is beautiful, and thank you for a deatailed tutorial. Will try this soon.
Hi! Thanks for the great tutorial, I’m about halfway through. Question, let’s say we’re out in the forest and need some rope for whatever reason, how quickly or easily is it to un-do all the ties on this bottle?
Beautiful creation. God bless.
I'm looking to do something like this for the handle of a boat motor, with which you control the speed. I have the feeling this will be a bit to loose to work, but something like this would be great!
Nice Project, very comprehensively presented.
Since you might open and close the net frequently on the top:
Wouldn't it be better to start with a doubled half hitch? Even with the end molten down I would be afraid that that single overhand loosens with time.
This is really cool. I made it for a taller Hydroflask and used a ranger bead instead of the cord stopper. Still looks awesome tho.
What a show. You're the best. I love doing this, it makes more phones opcoes.
I'm going to use this tutorial to make a bottle carrier for my fuel bottles strapped to my motorcycle.
Thank you!
if you carry around fuel bottles in this net, make sure you melt the starting knot and the ending knot into the net. Like plastic welding of some sort ^^ - in the clip, those knots look like they might break if it comes to sudden shocks or constant wear. You would not want those knots to break while carrying fuel bottles.
Such a wrap add a nice feature to your bottle: make it wet to cool your water about 15°Celsius under air temperature!
Cow hitch bottle rap is great .
I like it very much
Very satisfying to watch. Awesome work.
Man, that was an awesome piece of work and one of these days I will definitely have to try this 👍🏻😍😂
Hi! Watching from the Philippines! I wanna try this on my 1.8L thermal bottle. I couldn’t find a boot cover for this size. How much para cord do you think I will use for 1.8L ?Many thanks for this very cool video.
Thanks a lot. This idea gave me the best result for by bottle container that I made.
This is something actually useful, awesome idea buddy
I took out a new belt bag for a jog the other day and the crappy little elastic pocket on the bag dropped my bottle ten minutes into my run.
Going to use this weave to make myself a thigh holster for my water bottle.
Thanks man! 😎
Ok I'm gonna do this right now ! Thank you for your awsome videos
Amazing and beautiful! Will have to do this one for sure!
Congratulation excellent idea
Love that Critical Role Lofi in the background. Respect.
I would make an attachment for the lid to the neck of the bottle as well. I made mine by looping one end to the water can and then making making half hitches with alternate sides after it was 6 inches long, I tied it to the loop part of the lid. This took about 40 inches of paracord.
Good idea, lids get dropped all too often. A belt loop wouldn't hurt either.
I truly like d video. I'm very excited to do it also for my aqua flask. Thank you
always wanted to do but didn't know until you my friend
Another question... Does the bottle stand up right with all the cord on the bottom? It looks a little thick. Do you have other ways to finish the bottom?
This might seem like a weird request... But is there a tutorial in your videos that shows how to make a horizontal belt holster? I wanna make one for my nunchuks 😅
That's awesome I made one for my 1l canteen and it came out great I wish I know how to load the pic here, thanks for the tutorial5.
So cool
Wonderful use and it looks beautiful. I am going to try it on some of my special glasses cut and polished from painted beer bottles, some of which need to be protected. hat color combination is also a great choice. One could say that you executed to creation without a hitch (LOL), thanks.
wow, thanks you make it soo easyy!
Awesome! Exactly what I’ve been waiting for! Thank you so much Tim! Gonna look wild on my titanium bottle :D Greetings from Germany!
Hey Tim, just realized that you did a point mistake in the video. 50ft is 15.2 meters and not 1.52m 😅👍🏽
Wow, I been making these for years with this style
Think I might use this for my bong i mean flower vase 😂
Very COOL tutorial bro. Thank you so much 👍. Love your background music 😍.
I made this with An mat black Botle and neon Orange string its so cool!
I have a 40oz water bottle that I wanted to put on my belt, so I cut part of a pant leg of an old pair of jeans and sewed one end shut and put my water bottle in, I also made a loop by the top for a carabiner.
Love this! Is there a way to incorporate a shoulder strap on this design?
I made some bottle raps with French hitching but they were permanent not adjustable. Might have to make one of those cows hitch ones
This is awesomeeee.
wow what an awesome sub worth video. glad youtube suggested it to me
Can you do a tutorial on how to attach a shoulder along to this bottle wrap?? Is it possible?
Buenas tardes, haces cosas increíbles, gracias por compartir este conocimiento; lo intentaré. Saludos desde Ecuador.
Is there a way you would have to change this for a wider Nalgene bottle? Or just add a bit of extra paracord?? Thanks
Yeah...i dont know man. I watched Counter Strike 2 videos ago, took a quick look at how to make cheese with a guy who said g'day curd nerds and ended up with you tying knots with paracord around a bottle.
Thats quite a rabbit hole...
Nice video btw. See ya next time.
that guy from chesse is verry good " Gavin Webber " greeeat guy, i also somehow get to his channel from youtube recomendation
I'm going to do a version of this to anchor my bottle to a paddle board on both the top and bottom ends, to two separate D-rings!
Cool technique and video
Very good congratalations for you Job 👍👍😁 wonderful
LOVE all of the Incredible items. While I may have the dexterity, sadly, I’m afraid I’m (deficient) in the Patience dept. to make them look as proportionate as yours. Thanks !
"Wrap your bottle.. Yeaaaaahhh... Wrap your bottle, yeaaahhhh, wrap your bottle... wrap your bottle now.. backstreet back.. alright!!!"
Hello Friend. Very nice video thank you. 👍👏👏👏💖
You should do your own podcast.. I saw the one you were recently on and it was great I want more.
looks great.
Хорошая идея. Спасибо за ролик!
Cool. Have u got a link for the tensioner clip by any chance?
I like this super helpful video sir.
Awesome! I will make one for my bottle. Thanks
Where did you get that lighter? Thanks!
Fantastic work! Really inspirable!!! Many tks for sharing it!
Thank you! Cheers!
So cool.. I'm gonna try it after watch it
Wow good job bro... 👍
And Thanks for your videos...
There is a little mistake in video. 50ft is not 1.52 meters. It is 15.2 meters. I started to wrap my bottle and after few rounds was wondering that cord is about to end and I'm not even half away. New try with right length of cord. 😅
Yes, I made a slight mistake in the editing, I put the correction in the pinned comment.
Que hermosura de trabajo tegido quería preguntarte en el país donde vivo no venden esa aguja cual otra puedo utilizar mil gracias por tu en señanza es muy entendíble y muy bien explicado todo dios te bendiga siempre y te de mucha vida y salud para seguir adelante con todos tus proyectos y sueños
Wow! Very nice!
thanks a lot for your guideline, I have made one for my bottle. Pretty awesome!
Really cool
Great job!!
Super... You are talented...
Love it. Going to try this
What do you to maintain your cord? Preventing it from over twisting? Easier ways to keep cording separated and maintainable?
I have the same twisting problem...I have asked this question many times in many videos...no one every has a suggestion!
Just a suggestion YMMV try soaking the cord in warm water then give it a mild stretch and let air dry in loose loops, hopefully this will relieve some of the tension induced in the manufacturing process.
Why don’t they wrap paracord like they wrap yarn? Yarn doesn’t twist when you pull it from the middle of the skaen.
thats a nice job
Thank you love it
Owsome thanks for the tUTorial💯💯💯
Any time!
Could I attach molle clips to this and this and still be structurally sound?
Perfekt perfekt perfekt thank you my friend very nice knittink 👏👏👏👏👏👏🙏🙏🙏🙏👍👍👍👍
How do you measure the paracord to use in a water bottle? I want to make one for my 1.8L bottle.
I bet you could make some insane fishing rigs.
Amazing 😍😍😍😍😍
definitely will be making this
I know this vid is 3yr ago but just simply awesome!
Second one, good video
خیلی زیبا وجذاب آحسن استادجان
Two questions how much para cordb do you have. And have you thought about what happens when you need your parachute?
nice work
Very cool 😍😍😍😍
Awesome. Nice
This is useful instead of having the bottle in a sock to keep sleeping bag warm without burning yourself on the bottle
I wonder if you can do 2 colors(for the green part)
Would this work for a hip flask shaped bottle rather than a cylindrical bottle?
Would this work on a prismatic bottle?
i so like this DIY.....
Can you make a paracord kusari fundo, I thought about making one my self but I am a completo beginner paracord weaver.