Fascinating to see that some old clunkers are not beyond saving (as long as you have knowledge, experience, creativity, persistence, stubbornness, the right tools and a well-equipped workshop !). What one hears is that current Range Rover engineering and manufacturing will never again produce a car that be brought to life after 40 years of hard driving and neglect. A really excellent channel. Well done all involved.
@@rickh6963 I hope Edd gets a cut. Looks like they can't do without him. They've got less than 300k subs in nine years, Edd got a quarter of a million subs in a year. Quality just works.
I used to replace lots of brake pipes on cars when i worked at National Tyres and autocare. My most memorable has to be a vw golf "C" registered. The entire system needed new brake pipes mainly because of the same thing where the pipes join. I did one at a time and kept it connected to an old Lucas brake bleeder machine which i had to disconnect in between. Took a while so luckily he left it with us while he went on holiday. The car is still on the road to this day. This brought back that memory. Great show Edd thank you.
Other RUclipsrs: Barn find abandoned for 30 years started and driving in just 10 minutes!!! Edd: 40 minutes of fabricating a brake pipe. This is why we love you Edd ❤️
One big difference here is what is acceptable to drive on the road in one place vs another. In Europe you need an MOT, and insurance to drive. In many parts of the world, if you put fuel in it and it goes forward then its good to go. Derek from VGG would have got this beast running with a boat fuel tank, changed the oil and the trans fluid and as the front 2nd brake circuit sort of works, driven 1000 miles home. If he had temporary insurance (which he normaly does) he would be good to go and it would be perfectly acceptable!.
I'm glad you used the coper lines. That's a permanent fix because the car will rust away long before the line breaks again. Glad you didn't stop after Wheeler Dealers days. Wold be awesome for the old crew to get back together and make a car running again for fun. You are a great mechanic Edd
the choice of sounds to accompany the images of the brakes being bled took me to a new dimension, ok maybe not, but with the nightmare of music copyright, it's usually a big downer but not with the creativity of the accompanying sounds, they bring something pleasant to the party, good stuff
Edd, these videos are so well put togeter, lots attention to detail, I love them! This is definitely what I would expect to see in your channel, many thanks!
Whoever does the camera work and editing is doing a fantastic job. Your show is really up there and ready for TV. I don't miss Wheeler Dealers at all. With the quick pace and interesting projects, your new show is a great hit!
This is 10 x better than anything Wheeler Dealers ever did - no detail with them just theatre! Well done Edd China, really interesting stuff from which we can all Learn
I like wheeler dealers a lot, but there were a lot of details in the repair that were edited out to meet the 44 minutes per show. I really like this format better, keep showing the mistakes and repairs as they come instead of over editing them out! Great work!
Well thank goodness, he's back. When I explained to my lovely wife the dissolution of "the team", her response was: "Mr. China takes you through the repair process most thoroughly". To capture her interest regarding mechanical repair topics, you have to be outstanding,
@@jwatkins5155 to be honest the chassis isn’t that bad. The out riggers are the only serious issues I’ve seen and the can be done body on. Only area you can’t see is the top of the chassis. That’s where my defender was rotten. I replaced all the out riggers and rear crossmember. Got it through the MOT and then realised the top of the chassis was missing in a fair few spot. I could have spent time and effort welding it up. But a new chassis delivered was £2000. Not a terrible price if you ask me
You're absolutely right! Felt that way sinds the beginning. I remember Edd with dark hair and reparing a Ford capri and the Porsche 924. There is something to be said about ''used car salesman'' and ''integrity''. The first chance Mike got he ran of with American producers with cheesy commercial ideas that ruined a good car program. Just like that producer who fired Jeremy from Top Gear. I hate this day and age but God am I thankful that Edd is on his own now! He was genuinely the only interesting factor in that program.
Ant Anstead isn't too bad, he does do the same things as Edd, but it's what the editor leaves in and what the director & producer want that makes the most difference.
@@neilbarnett3046 I’m sure editing plays a major role but I think this channel is what Edd had in mind, a more in depth auto repair/restore show, whereas WD has gone more in the way of a car flipping show.
Loving the series, far better than wheeler dealers, the in depth analysis of how to do things is what wheeler dealers need to show, keep up the amazing work
Hey Edd nice job what I love about these videos is the fact you take the time to show the process I know with the tv shows you always had time constraints but they alway felt rushed and incomplete for people like myself interested in how it all works.. this is way better. Much appreciated for the time you take to bring us all along….
Brilliant Episode Edd. Reminds me of a mini a friend had that had been sitting for about four years. I spent three weeks doing tons of jobs on it and finally getting it through an MOT. Greatest feeling in the world. Like to this Rangey getting fully restored 👍🏻
This is how advertisers should use RUclips. As someone who tries to avoid adverts at every stage, the subtle shots of the Ansell gloves and power tools added to the quality of this video. Eddvertising masterclass. I even bought a box of those gloves online (oh...and Subscribed) Nice job!
Straight forward,simple,no B.S...Enjoyed it.As one old mechanic to another great job on the whole thing.Clean clear video and explanations.Quality all the way.
@@haskyb9184 Hey Ben! I peeked over here a few times. Seems like they got their mojo back! =) I use to watch WD every night on Discovery back in the day. Loved it! =)
I Used to watch Wheeler Dealers, but when they dropped Ed and moved to the US for good I would not watch it anymore. Now that we have good old Ed China back at the shop I am quite happy to see every weeks installment, this new show is brilliant. It’s has inspired me to start working on my MGB restoration, that stalled 10yrs ago. Thank you Ed!!!
Ed, good morning. The Range Rover project its wonderful! Your are a excelent engineer, and person. I like your job and videos. Congratulations! Best regards from México.
This is great. So much work to find out how much more work is needed. Classic. Looking at the blue smoke coming out of the exhaust at the end, I'd say this show isn't over yet. Cheers
Used to always see your show on the tele but had no idea about your channel. I was getting tired of seeing just American mechanics with American cars... I'm so glad I found your channel, probably the best suggestion RUclips ever made me 😃.
thank you very much, edd, for the subtitles in portuguese! my dad loves watching dealers whealers and now are watching your channel! cheers from brazil!
Excellent series! I'll never own a classic Range rover but it's great watching the transformation to a running vehicle. Better than regular television!!
This would be a great video if there weren’t so many adverts. Ed China you are a legend I understand they are required and I’m totally okay with a couple ads but it’s almost unwatchable. Anyone else the same or is it just me?
im here in the U.S.(Michigan) we use salt in the winters one of my projects is a mercury grand marquis, the brake lines have suffered likewise from the years and the car sitting ( its a 1996) I am impressed by the level of expertise it takes to fabricate new lines, my mechanic makes everything seem so easy...
I have made new copper brake pipes, it is easy to do with a hand flanging tool, takes five minutes longer, but not hard. You don't have to be so fussy when running it along the car, as long as it is secured to the body (you can get plastic clips) and it is not hampering or rubbing against anything. Did all the brake pipes on my old car and it sailed through the MOT. It felt a bit spongy after bleeding, but a few hefty pushes on the peddle shifted the bubble of air and it worked its way to where it could be expelled. He commented on the hand brake but it just passed, it improved with use and in the end would lock the back wheels when driving along the road. I think it was just a bit of contamination on the rear brakes. He also commented on one wheel that was feathering a tyre, so he aligned it for next to nothing. He also broke his shifter while trying to loosing a track rod end nut. I tried not to laugh, but failed. He said it had a crack in the jaw of it for ages, it has been a spanner for 30+ years, been hammered on, put on the end of a long pipe with two people pushing on the pipe, it owes me nothing. Been a good shifter, but I was needing a new one anyway. He was quite strict with MOTs, but he lost his licence for them, never found out why!
Great video Ed.When I was a apprentice in the early 90s my boss had exactly the same brake flare tool,I haven’t seen one in a very long time and they worked a treat.In a small workshop In Melbourne we would convert import USA Porsche’s 356 to right hand drive and I had to hand bend these brake lines. 👍🇦🇺
This is exactly the kind of videos I love! Fixing up an old beat up car that's really nothing special, which most of us can relate to. I also like that you have the perfect balance between being informative, detailed and entertaining. 👍👍
Run into your channel couple of hours ago, its now0233 am going to get another coffee n watch few more of your videos mate they are Brilliant your truly a master crafter, never enjoyed a video on car repairs like yours B4 ever many thanks mate
I'm just so happy to see you doing exactly what you want to do Edd. Teaching this global community some skills we otherwise would never have exposure to. Thanks for carrying on the show, being the wealth of information you are and interacting with the community. Bravo sir
Nice to see Ed Recycling this RR back onto the road eventually, in a society Today where we are more often scrapping relatively repairable cars which can be used for many more years to come.
The UK and car dealers offering Scrappage incentives is part of the reason many of these old vehicles are scrapped because with a move to a greener society they are getting to the point that in a few years the Emission regulations will be almost impossible to meet.
A first class mechanic and a first class story teller as well and an all round nice guy. I can see why you’re approaching nearly a million subscribers. Keep up the good work. As I said before, from one 6’5 VW enthusiast to another, feel free to come and play air cooled beetles with me at any time!
Great to see you back. Production values are great and I'm not even bothered by the odd "Accidental" product placement. So great to see a car mechanic show with no "If we don't finish by morning we will lose the shop!" Bull eggs.
“It’s fuel injection, it’s bound to” 😂🤣 This along with Project Binky is my kinda entertainment. I think they can learn much across the pond, rather than repetition and continuous adverts.
I love this show. I have made many bake lines for old rusty vehicles here in Chicago. I usually do this by hand. I knew about these line bending tools and now I will have a clue about using them properly. Thank you
I like the fact that we see projects from start to finish. None of this coming back from a commercial break and to find the engine/ transmission have been changed and it’s had a paint job.
Result! Edd, you should consider taking advantage of the current mania for ASMR videos and just present loops of activities like you recreating knackered brake lines. What a lovely thing to watch! Your hand skills + common sense analysis are a joy... All the best, sir!
I love the tempo of your show. I've been wrenching on cars for all of my adult life, so I'm not learning anything new here, but it's a stark contrast to the way I operate. I'm always cursing and moving quickly. I especially don't like doing rusty brake lines because they tend to break in more spots than they even were before I start in on them. You're cool, collected, calm, and the camera work really sets it off. Nice job. Also, I really like that flaring tool. If I have another big project where I need to do a bunch of flares, I might pick one up.
Ed, there is a flat die on the rotary part of the flaring tool. Before fully tightening the clamp, it pushes the pipe back to exactly flush with the end of the die blocks. Takes away the guesswork. By the way in the states we call Cunifer "NiCopp". Thanks for the great content! Cheers
I have a sneaky suspicion the 'pass' list will be shorter than the 'fail' list.... Best book a double-slot for the MOT Edd, no way 45 minutes is long enough for that old shed!!
@@Rasigarage it has happens to me. Not in automotive application. I was making a hydraulic line for an airplane. Made two of the most perfect flares known to man. Only to find that the ends were laughing at me from the workbench. Lol
Wait until you congratulate yourself for routing the new pipe neatly, only to discover you fitted one of the ends(who owns a flaring tool without a selection of new fittings, which are only a few pence each?) the wrong way around...
absolutely love the show!!!! and It must be said, your camera man and editor are fantastic!!!! every second is soo well edited, and every shot is beautifully thought out!! Such a pleasure to watch!!
![Megan Thee Stallion - Roc Steady (feat. Flo Milli) [Official Video]](http://i.ytimg.com/vi/HozPPyqW0dY/mqdefault.jpg)
With this every Friday I don't miss wheeler dealers at all.
Not anymore !
Not missing WD doesn't take that much effort to be honest...
Its a good replacement
Wheeler what ?
@@Vespastendert
And no used car salesman who pops up halfway through the episode to give snarky remarks
Fascinating to see that some old clunkers are not beyond saving (as long as you have knowledge, experience, creativity, persistence, stubbornness, the right tools and a well-equipped workshop !). What one hears is that current Range Rover engineering and manufacturing will never again produce a car that be brought to life after 40 years of hard driving and neglect. A really excellent channel. Well done all involved.
Thank you Edd (and your team) for sticking to your beliefs of what a great car show should be!
Wheeler Dealers youtube channel just posted episode #1 of the show. And there was Edd China, looking young, thin and with No grey hair!!!!
@@rickh6963 I hope Edd gets a cut. Looks like they can't do without him. They've got less than 300k subs in nine years, Edd got a quarter of a million subs in a year. Quality just works.
blame the american format on wheeler dealers for them it's all about the $$$$$$$$ with advertising - ed did the right thing getting out
Yep, couldn’t agree more!
I used to replace lots of brake pipes on cars when i worked at National Tyres and autocare. My most memorable has to be a vw golf "C" registered. The entire system needed new brake pipes mainly because of the same thing where the pipes join. I did one at a time and kept it connected to an old Lucas brake bleeder machine which i had to disconnect in between. Took a while so luckily he left it with us while he went on holiday.
The car is still on the road to this day. This brought back that memory.
Great show Edd thank you.
Other RUclipsrs: Barn find abandoned for 30 years started and driving in just 10 minutes!!!
Edd: 40 minutes of fabricating a brake pipe.
This is why we love you Edd ❤️
Edd China for the win!
Binky: 7 years of fabricating brackets.
To be honest, a barn one, especially if its been prepared for storage, will be in a lot better condition than this out door one
One big difference here is what is acceptable to drive on the road in one place vs another. In Europe you need an MOT, and insurance to drive. In many parts of the world, if you put fuel in it and it goes forward then its good to go. Derek from VGG would have got this beast running with a boat fuel tank, changed the oil and the trans fluid and as the front 2nd brake circuit sort of works, driven 1000 miles home. If he had temporary insurance (which he normaly does) he would be good to go and it would be perfectly acceptable!.
I'm glad you used the coper lines. That's a permanent fix because the car will rust away long before the line breaks again. Glad you didn't stop after Wheeler Dealers days. Wold be awesome for the old crew to get back together and make a car running again for fun. You are a great mechanic Edd
Will I ever need to rebuild a rusted brake line? No. Do I want to watch Edd rebuild a rusted brake line? YES!!!!
I've had to make a few brake lines before, but I still enjoyed watching Edd do it!
I almost ruined one of mine, so I've watched some videos on it. This was a good demonstration.
First time I've seen it done. 😎
I can't drive but good series and great workmanship.
😂
Cameraman should be congratulated on his closeup filming and general camera work. Production team work is excellent.
Or maybe he should avoid close-ups altogether in the future - seeing the rotten frame in details gave me goosebumps :-)
Your production team's creative shots and editing are top-notch quality...a real pleasure to watch.
True that, I haven't found another mechanical channel with as clear quality and production value, it's great!
Gotta keep those sponsors happy, too! 😁
@@Involvod ChrisFix
@@toyotacorollae1407 Ah yeah, Flexiny too now I think about it.
the choice of sounds to accompany the images of the brakes being bled took me to a new dimension, ok maybe not, but with the nightmare of music copyright, it's usually a big downer but not with the creativity of the accompanying sounds, they bring something pleasant to the party, good stuff
Edd, these videos are so well put togeter, lots attention to detail, I love them! This is definitely what I would expect to see in your channel, many thanks!
Whoever does the camera work and editing is doing a fantastic job. Your show is really up there and ready for TV.
I don't miss Wheeler Dealers at all.
With the quick pace and interesting projects, your new show is a great hit!
This is 10 x better than anything Wheeler Dealers ever did - no detail with them just theatre! Well done Edd China, really interesting stuff from which we can all Learn
I like wheeler dealers a lot, but there were a lot of details in the repair that were edited out to meet the 44 minutes per show. I really like this format better, keep showing the mistakes and repairs as they come instead of over editing them out! Great work!
Love the authenticity of your videos.
Milwaukee, one of the best sponsors a mechanic can have!
I love how all he needs to do is use the tools, they sell themselves after that.
Well thank goodness, he's back. When I explained to my lovely wife the dissolution of "the team", her response was: "Mr. China takes you through the repair process most thoroughly". To capture her interest regarding mechanical repair topics, you have to be outstanding,
Finally someone shooting these videso in 4k with a good cinematography. SO satisfying
Not so in the wilds of Lincolnshire where the bandwidth is so low, it buffers all the time
@@pigswhist which connection?
@@simone1997ita copper lines a mile from the main box
Thanks Edd and crew again👍👍 until next week.
Edd = National treasure
The epitome of patience and attention to detail 🇬🇧🇬🇧🇬🇧👍👍👍
Love this series, hope there is many more!
Considering it needs a full strip down body off rebuild, I'd imagine there will be more
@@jwatkins5155 Definitely, but when this is up and running I hope he finds something else to work on 🙂
@@jwatkins5155 to be honest the chassis isn’t that bad. The out riggers are the only serious issues I’ve seen and the can be done body on. Only area you can’t see is the top of the chassis. That’s where my defender was rotten. I replaced all the out riggers and rear crossmember. Got it through the MOT and then realised the top of the chassis was missing in a fair few spot. I could have spent time and effort welding it up. But a new chassis delivered was £2000. Not a terrible price if you ask me
Ed you are the man. Watching you fabricate and bend the brake pipe was outstanding.
Ed, I'm glad you're still around, wrenching in the workshop. You have a unique way of explaining things, that gets through to my thinking. Thanks!
Do not judge someone else’s past; you don’t know your future
@@margaritasycheva4670 what are you on about?
Oh boy. Looking at that underside I get PTSD from my own Merc restauration all over again. Great to have you back Ed. 🙂
Enjoy this so much - let’s be honest Ed was the best part of WD by far.
Ed was better of course
Edd was/is a rare breed. An honest mechanic to say the least, a passionate engineer. Mike is a used car salesman. Enough said.
You're absolutely right! Felt that way sinds the beginning. I remember Edd with dark hair and reparing a Ford capri and the Porsche 924. There is something to be said about ''used car salesman'' and ''integrity''. The first chance Mike got he ran of with American producers with cheesy commercial ideas that ruined a good car program. Just like that producer who fired Jeremy from Top Gear. I hate this day and age but God am I thankful that Edd is on his own now! He was genuinely the only interesting factor in that program.
Ant Anstead isn't too bad, he does do the same things as Edd, but it's what the editor leaves in and what the director & producer want that makes the most difference.
@@neilbarnett3046 I’m sure editing plays a major role but I think this channel is what Edd had in mind, a more in depth auto repair/restore show, whereas WD has gone more in the way of a car flipping show.
This is the only reason why I watched that car show with the chubby dude. So glad you are getting content back out there Edd!
Best video so far!!!!😁😁😁 back to the basic super descriptive. There's the old Edd China bravo🤗🤗😁😁😁😁😁 i knew you had left in ya.
Loving the series, far better than wheeler dealers, the in depth analysis of how to do things is what wheeler dealers need to show, keep up the amazing work
Perhaps you should just dip the entire vehicle in the rust remover you used for the gas tank... thanks for taking us along on this journey
😂
Well, dissolving the whole car is certainly going to deal with it 😂
I'd really like to see someone go over a rusty car with a 'cleaning' laser like Narran manufacture. Would be interesting to see what was left.
Strap the whole car to a cement mixer and fill it with bolts, just to be sure.
there will be nothing left to take out.
I just watch, I don't have any questions.I watch and learn keep them coming Edd China!!
Hey Edd nice job what I love about these videos is the fact you take the time to show the process I know with the tv shows you always had time constraints but they alway felt rushed and incomplete for people like myself interested in how it all works.. this is way better.
Much appreciated for the time you take to bring us all along….
That new pipe just doubled the value of the car. I just found your channel Edd and I'm super happy.
Brilliant Episode Edd. Reminds me of a mini a friend had that had been sitting for about four years. I spent three weeks doing tons of jobs on it and finally getting it through an MOT. Greatest feeling in the world. Like to this Rangey getting fully restored 👍🏻
We love you Ed!
Whoever does the editing on these videos is doing a great job 👍 Loving the RR series Edd!
I’m so fortunate to be slowly restoring an old Range Rover and have Ed’s amazing tutorials to assist me! 👏
The cinematography and music even the little sound effects are spot on! Like the sound of the bubbles played by the flute lol made my day
that was a lot of fun to watch! ... Cheers from Nova Scotia
Ed - have to admire your perseverance with the old Rangie. Cannot believe just how crusty it is everywhere you look. Cannot wait to see finished job!
Jippii. Awesome video again. Jälleen kerran aivan mahtava video. More such videos. Greetings from Finland
This is how advertisers should use RUclips. As someone who tries to avoid adverts at every stage, the subtle shots of the Ansell gloves and power tools added to the quality of this video. Eddvertising masterclass. I even bought a box of those gloves online (oh...and Subscribed) Nice job!
Straight forward,simple,no B.S...Enjoyed it.As one old mechanic to another great job on the whole thing.Clean clear video and explanations.Quality all the way.
I’m really enjoying this series! nice job guys!😎
CT found his way over to an English Channel. Nicely done, mate 😉
@@haskyb9184 Hey Ben! I peeked over here a few times. Seems like they got their mojo back! =) I use to watch WD every night on Discovery back in the day. Loved it! =)
Two Edds are better than one at the end.
I Used to watch Wheeler Dealers, but when they dropped Ed and moved to the US for good I would not watch it anymore. Now that we have good old Ed China back at the shop I am quite happy to see every weeks installment, this new show is brilliant. It’s has inspired me to start working on my MGB restoration, that stalled 10yrs ago. Thank you Ed!!!
I have no desire for old cars at all especially for SUV-s but I enjoy watching him fixing things.
Todo un genio Edd China ,veo todos sus programas..
one of the few videos I could watch while being on the edge of my seat every minute
It's very interesting, thanks for videos. Best Wishes from Saint-Petersburg, Russia.
If you get an MOT for that rust bucket you are a magician! Can't wait to see the result.
Ed, good morning.
The Range Rover project its wonderful!
Your are a excelent engineer, and person.
I like your job and videos.
Congratulations!
Best regards from México.
These are probably my favorite videos on RUclips. Thank you!
This is a great show Im hooked. Ed is such a great problem solver.
The show looks like WD with all the cons gone. Thank you for the every daily dose of edd fixing stuff. I didn’t realize I need that until I lost it .
I'm thinking about buying a secondhand R/Rover, your workshop diaries are a great help
This is great. So much work to find out how much more work is needed. Classic. Looking at the blue smoke coming out of the exhaust at the end, I'd say this show isn't over yet. Cheers
Totally love your stuff. No disrespect, that rover makes me appreciate Toyota Landcruiser even more
Love the way you don't skip the problems (usually rust) we all encounter, this is a great show Edd, be proud of the following you have.
Used to always see your show on the tele but had no idea about your channel.
I was getting tired of seeing just American mechanics with American cars... I'm so glad I found your channel, probably the best suggestion RUclips ever made me 😃.
Edd you're a good teacher. We learn lots from you, good man.
thank you very much, edd, for the subtitles in portuguese! my dad loves watching dealers whealers and now are watching your channel! cheers from brazil!
Excellent series!
I'll never own a classic Range rover but it's great watching the transformation to a running vehicle.
Better than regular television!!
This would be a great video if there weren’t so many adverts. Ed China you are a legend I understand they are required and I’m totally okay with a couple ads but it’s almost unwatchable. Anyone else the same or is it just me?
im here in the U.S.(Michigan) we use salt in the winters one of my projects is a mercury grand marquis, the brake lines have suffered likewise from the years and the car sitting ( its a 1996) I am impressed by the level of expertise it takes to fabricate new lines, my mechanic makes everything seem so easy...
We put salt on the roads here in the uk in the winter its rusts best friend lol
I have made new copper brake pipes, it is easy to do with a hand flanging tool, takes five minutes longer, but not hard. You don't have to be so fussy when running it along the car, as long as it is secured to the body (you can get plastic clips) and it is not hampering or rubbing against anything. Did all the brake pipes on my old car and it sailed through the MOT. It felt a bit spongy after bleeding, but a few hefty pushes on the peddle shifted the bubble of air and it worked its way to where it could be expelled. He commented on the hand brake but it just passed, it improved with use and in the end would lock the back wheels when driving along the road. I think it was just a bit of contamination on the rear brakes. He also commented on one wheel that was feathering a tyre, so he aligned it for next to nothing. He also broke his shifter while trying to loosing a track rod end nut. I tried not to laugh, but failed. He said it had a crack in the jaw of it for ages, it has been a spanner for 30+ years, been hammered on, put on the end of a long pipe with two people pushing on the pipe, it owes me nothing. Been a good shifter, but I was needing a new one anyway.
He was quite strict with MOTs, but he lost his licence for them, never found out why!
I dont know my arse from my elbow about mech stuff but ive really enjoyed the videos about the range rover. cant wait till the next installment
Great video Ed.When I was a apprentice in the early 90s my boss had exactly the same brake flare tool,I haven’t seen one in a very long time and they worked a treat.In a small workshop In Melbourne we would convert import USA Porsche’s 356 to right hand drive and I had to hand bend these brake lines. 👍🇦🇺
It's a pleasure looking at you at work
This is exactly the kind of videos I love! Fixing up an old beat up car that's really nothing special, which most of us can relate to. I also like that you have the perfect balance between being informative, detailed and entertaining. 👍👍
Run into your channel couple of hours ago, its now0233 am going to get another coffee n watch few more of your videos mate they are Brilliant your truly a master crafter, never enjoyed a video on car repairs like yours B4 ever many thanks mate
It’s always a “joy” and oh that feeling when rusty fittings unscrew! The joys of being a mechanic!
You share so much teorethical and practical knowledge with us. Thx! /Leif in Sweden
I'm just so happy to see you doing exactly what you want to do Edd. Teaching this global community some skills we otherwise would never have exposure to. Thanks for carrying on the show, being the wealth of information you are and interacting with the community. Bravo sir
So fab to finally see a honest channel that really dose show the hassle that car restoration and repairs can be 10/10 to Edd
Nice to see Ed Recycling this RR back onto the road eventually, in a society Today where we are more often scrapping relatively repairable cars which can be used for many more years to come.
The UK and car dealers offering Scrappage incentives is part of the reason many of these old vehicles are scrapped because with a move to a greener society they are getting to the point that in a few years the Emission regulations will be almost impossible to meet.
We love you Edd!! Enjoy very much the way you explain things! Crack on!!!
Using the bender as an angle gauge is a great tip! I always eyeballed the angle and then compared to the old pipe.
Did I learn anything watching this after running a successful business working on old cars for the last 15 years? Nope.
Did I enjoy it? Absolutely!
A first class mechanic and a first class story teller as well and an all round nice guy. I can see why you’re approaching nearly a million subscribers.
Keep up the good work. As I said before, from one 6’5 VW enthusiast to another, feel free to come and play air cooled beetles with me at any time!
Great to see you back. Production values are great and I'm not even bothered by the odd "Accidental" product placement.
So great to see a car mechanic show with no "If we don't finish by morning we will lose the shop!" Bull eggs.
“It’s fuel injection, it’s bound to” 😂🤣
This along with Project Binky is my kinda entertainment. I think they can learn much across the pond, rather than repetition and continuous adverts.
A couple more epic channels like binky and Edd and I can cancel Netflix and finally stop paying my TV license...
Judging by the state of this Range, it could take as long as Binky to see the road! 🙈🤣
@@peteledwidge3631 By the time Binky is on the road, it'll need converting to electric to meet homologation. :)
Should I care if this thing passes MOT? Do I? ABSOLUTLEY!!!! Can't wait for the next installment.
I love this show. I have made many bake lines for old rusty vehicles here in Chicago. I usually do this by hand. I knew about these line bending tools and now I will have a clue about using them properly. Thank you
I like the fact that we see projects from start to finish. None of this coming back from a commercial break and to find the engine/ transmission have been changed and it’s had a paint job.
Result!
Edd, you should consider taking advantage of the current mania for ASMR videos and just present loops of activities like you recreating knackered brake lines. What a lovely thing to watch!
Your hand skills + common sense analysis are a joy...
All the best, sir!
Love you show Edd, thanks
Classic Edd with lots of spanner action and useful stuff! I see Edd is thundering past 750,000 subscribers as well👍
Loved this episode. That Range Rover is now a happy vehicle!
Every time I watch this, I feel refreshed in the sense that a repair has been possible and done by a professional. Great video edd 👍🏼👍🏼
I love the tempo of your show. I've been wrenching on cars for all of my adult life, so I'm not learning anything new here, but it's a stark contrast to the way I operate. I'm always cursing and moving quickly. I especially don't like doing rusty brake lines because they tend to break in more spots than they even were before I start in on them. You're cool, collected, calm, and the camera work really sets it off. Nice job.
Also, I really like that flaring tool. If I have another big project where I need to do a bunch of flares, I might pick one up.
Who needs to do a college course in car mechanics when you can just watch Edd? :)
In the old days we had Haynes books for car repairs now we have Edd 😊
Ed, there is a flat die on the rotary part of the flaring tool. Before fully tightening the clamp, it pushes the pipe back to exactly flush with the end of the die blocks. Takes away the guesswork. By the way in the states we call Cunifer "NiCopp". Thanks for the great content!
Cheers
Not on this tool.
Have to say Edd this is much better than an episode of WD it’s much more natural and less staged
The amount of knowledge gained in these videos is priceless. Thanks a lot Edd and Crew.
I know it is a stupid question but who is disliking these videos?
These are awesome!
Thanks to Edd and everyone involved. This series is great!
Greetings from Turkey Edd China, we are watching you with great interest
Perfect way to start the weekend!
It was a lovely surprise so see Ed and the Range Rover today when I stopped for fuel, loved the energy you had going on even when you were off camera.
I have a sneaky suspicion the 'pass' list will be shorter than the 'fail' list.... Best book a double-slot for the MOT Edd, no way 45 minutes is long enough for that old shed!!
A new car that is set ablaze will get better inspection results than this one.
I like the reservoar filling device you had whilst bleeding the brakes. Great show by the way.
It’s all good until you flare both ends of your tube and look over to find the ends still in your work bench. Lol. Love this series!
😂😂😂😂😂 sounds like it has happened to you b4 it happened to me once 😂😂😂
@@Rasigarage it has happens to me. Not in automotive application. I was making a hydraulic line for an airplane. Made two of the most perfect flares known to man. Only to find that the ends were laughing at me from the workbench. Lol
@@michaellearn5117 😂😂😂😂 and thats when you just did ur best work
Wait until you congratulate yourself for routing the new pipe neatly, only to discover you fitted one of the ends(who owns a flaring tool without a selection of new fittings, which are only a few pence each?) the wrong way around...
Another great video Edd, great to see you in camberley today with the outspan orange👍🏼
absolutely love the show!!!! and It must be said, your camera man and editor are fantastic!!!! every second is soo well edited, and every shot is beautifully thought out!! Such a pleasure to watch!!