The wiring looks okay….. lmfao yeah I remember high school, had wires all over the place, didn’t care at all, now I’m almost 30 I take pride in not seeing them, just tuck em a lil better and use zip ties, it’ll look a lot cleaner, but other than that good video
Go to the Home Depot and get some roofing tape "insulation" for 16 bucks a roll and do the sound treatment. That stuff is almost like dynamat but so much cheaper.
I have a vxf-dv4 and a zvx- dv2 the vxf you can use in a smaller box the 2cu and the zvx needs 3cu ft. They both hit the same to me. My vxf sounds great with my rf 1500bdcp amp. Skar amps are 1ohm stable so make sure if you’re running one sub that it’s a dv2. I’m running my zvx on a sk-2500.1. Still breaking in my zvx but to me personally it beats the same!
It's bad to have your amps on your box sooner or later they will will break from the bass vibration,also I have one zvx18 n my box is 5cubz .your system will slap if u get a box that's 6cubz,also why the heck u have your fuse next to your amp
I have the same set up yet my woofer isn't flexing like that is it because I'm not running a second battery 'optima battery im using a cheap capacitor....or did u drop ur 1 ohm to a .5 ohm
Hey bro nice sub but I had a crescendo bc4k at half ohm sub was seeing about 7k that 2k is tickling but the gain is up a little high I'd back down a bit that amp dont have a clip light turn it down a hair eventually it will fry but that sub has a 8 layer flatwound copper coil it can take abuse other than that beast setup try another 2k on it it would love it
would you say this sub is musical? i just went to their site and it has a fs of 50hz and the description said its an spl sub. would you compare it to an orion hcca sub
Sounds badd ass bro ! I have the same setup as you but mine clips when i turn it up, i have a 2014 gmc 1500, what batteries you recommend for this setup? Xs power or other ones? I want to run a main one and second one but idk what size for underhood one
I see ur woofer is a 2 ohm and u wired down to a 1 ohm I already have a 12 in skar zvx v2 dual voice coil 1 ohm stable I just need another battery right?
Are u running extra battery? And are you on regular alternator or was it upgraded. I’m planning on buying this exact setup. Is thr a way to actually talk to maybe an email thn we could swap numbers so we can talk more on info please. Respectfully thank you bro.
Skar ZVXv2 skar 2000.1 amp custom 36x13x24 Box 2, 8 inch ports upgraded agm batteries. 1 in the front and one next to the box. running 4 gauge power across batteries. stock alternator. rear battery runs 0 gauge ground to the car and 0 gauge to the amp
how much rms wattage are you feeding it? have you put a volt meter on to check? just wondering what I can feed mine and a gain knob means nothing because headunits put out all different voltage
never put a meter on it just have the gain at half knob on the amp and most songs i have the knob up front maxed out. should only be putting out 1000-1500 not really sure but sub doesnt bottom out so its good. tuned by ear mostly. been lasting
@@robertyanez4671 the gain is still dependant on how much pre-out voltage you headunit has. An amp will be more sensitive to 8v rather than 2v. It doesn't make a huge difference, but it's a difference no the less that could possibly cause the amp to clip at different settings
upgraded agm batteries. 1 in the front and one next to the box. running 4 gauge power across batteries. stock alternator. rear battery runs 0 gauge ground to the car and 0 gauge to the amp
@@JohnnyDriftZ3 nice system, just a suggestion but its recommended to run all the same size wire gauge to get better current flow and and less warming up of the little gauge wires, I like them rims.....
I have 2 vxf12s on the skar prefab on a epicenter its slaps but do break in I'm half gain at 20 headunit volume 3/4 bass knob, and epicenter on some songs
ert wert from my research ya gotta match it to your head unit volume. I have a hu with lower voltage output than most so I compensate by turning the gain up, full gain on 2ohm, ~3/4 with 1 ohm. Half ohm now on 2 zvx 12s around 3/4 gain, no clipping.
Thanks for the review update bro ! I've been on the fence between 2 of these or two sundown x12s but the X's are twice the price eehh.
Did you end up getting the ZVX? Im in the same situation
You can give that zvx 2k watts all day it won’t break a sweat!
The wiring looks okay….. lmfao yeah I remember high school, had wires all over the place, didn’t care at all, now I’m almost 30 I take pride in not seeing them, just tuck em a lil better and use zip ties, it’ll look a lot cleaner, but other than that good video
Are you heard coming down the street?
Go to the Home Depot and get some roofing tape "insulation" for 16 bucks a roll and do the sound treatment.
That stuff is almost like dynamat but so much cheaper.
Except it's not. Don't recommend that shit to people. You can get actually sound deadener fair cheap on Amazon
If I get a single zvx 12 would I need another battery to run it if I buy rp 1500 skar amp?
If I was you I would up grade your alt n extra battery for sure for one skar on 1500
I have same setup all I have is big 3 and 1 agm been fine over a year
Is that the RP-1500.1D? That's what Skar recommends. I just bought one but now need a box. I don't think they make one
2000.1d
@@JohnnyDriftZ3 Nice!. They told me the 1500 is good for it. Wonder if I'll be okay? And did u make a box, I still need one.?
I got a evl but want more bass. I’m stuck in getting a VXF OR AB XFL? would you guys recommend
Vxf would be a downgrade, get a ZVX 15, or 12, they both hit lowww tho
Really, ima have to look at the zvx
I have a vxf-dv4 and a zvx- dv2 the vxf you can use in a smaller box the 2cu and the zvx needs 3cu ft. They both hit the same to me. My vxf sounds great with my rf 1500bdcp amp. Skar amps are 1ohm stable so make sure if you’re running one sub that it’s a dv2. I’m running my zvx on a sk-2500.1. Still breaking in my zvx but to me personally it beats the same!
It's bad to have your amps on your box sooner or later they will will break from the bass vibration,also I have one zvx18 n my box is 5cubz .your system will slap if u get a box that's 6cubz,also why the heck u have your fuse next to your amp
Hi im new on your Chanell where you have set the bass eq 0d-6d-12d?
6
I have the same set up yet my woofer isn't flexing like that is it because I'm not running a second battery 'optima battery im using a cheap capacitor....or did u drop ur 1 ohm to a .5 ohm
What’s that song called was playing in the Beginning in the video
blueberry faygo
Question if I want to get 2 12 of skar audio zvx 12 do u have dual 1 or 2
Hey bro nice sub but I had a crescendo bc4k at half ohm sub was seeing about 7k that 2k is tickling but the gain is up a little high I'd back down a bit that amp dont have a clip light turn it down a hair eventually it will fry but that sub has a 8 layer flatwound copper coil it can take abuse other than that beast setup try another 2k on it it would love it
would you say this sub is musical? i just went to their site and it has a fs of 50hz and the description said its an spl sub. would you compare it to an orion hcca sub
im not too familiar w other subs beside pioneer. and i will say this sub blows pioneer out the water imo
these woofers are what I call “mud motors” they pound out low rolling bass and have a good punch but lack cone accuracy
It’s spl. Hits hard but lacks… “cleanness”?
Doesn’t seem to hit the really low note well like it should
it's the microphone i've got the same sub in my room and it does hit lows quite nicely
No bro it hits low notes bad ass the video does no justice my body was trembling on mamams
I have rp 2000.1 where did you set your subsonic and bass eq on your amp
20-25hz
Which model amplifier is it ? I got EVL12 only on 1,000 watt amp hit hard nice set up
2000 watts amp
What do you have for electrical
Sounds badd ass bro ! I have the same setup as you but mine clips when i turn it up, i have a 2014 gmc 1500, what batteries you recommend for this setup? Xs power or other ones? I want to run a main one and second one but idk what size for underhood one
i use 2 agm batteries from auto parts store.. the 200$ each ones... last long strong asf
@@JohnnyDriftZ3thanks for the reply broo i will do that boss🙏
I see ur woofer is a 2 ohm and u wired down to a 1 ohm I already have a 12 in skar zvx v2 dual voice coil 1 ohm stable I just need another battery right?
Should have went for the sundown X ..... cost more but a LOT more flex
Are you using the full 2,000watts? You’re wired to one ohm (2,000 watts) or two(1,400 watts)?
1ohm 2000 watt. Half volume knob
Are u running extra battery? And are you on regular alternator or was it upgraded. I’m planning on buying this exact setup. Is thr a way to actually talk to maybe an email thn we could swap numbers so we can talk more on info please. Respectfully thank you bro.
Skar ZVXv2
skar 2000.1 amp
custom 36x13x24 Box
2, 8 inch ports
upgraded agm batteries. 1 in the front and one
next to the box. running 4 gauge power across
batteries. stock alternator. rear battery runs 0
gauge ground to the car and 0 gauge to the amp
how much rms wattage are you feeding it? have you put a volt meter on to check?
just wondering what I can feed mine and a gain knob means nothing because headunits put out all different voltage
never put a meter on it just have the gain at half knob on the amp and most songs i have the knob up front maxed out. should only be putting out 1000-1500 not really sure but sub doesnt bottom out so its good. tuned by ear mostly. been lasting
The gain knob is connected to the amp though not the head unit???
@@robertyanez4671 the gain is still dependant on how much pre-out voltage you headunit has. An amp will be more sensitive to 8v rather than 2v. It doesn't make a huge difference, but it's a difference no the less that could possibly cause the amp to clip at different settings
you running on stock electrical?
upgraded agm batteries. 1 in the front and one next to the box. running 4 gauge power across batteries. stock alternator. rear battery runs 0 gauge ground to the car and 0 gauge to the amp
@@JohnnyDriftZ3 nice system, just a suggestion but its recommended to run all the same size wire gauge to get better current flow and and less warming up of the little gauge wires, I like them rims.....
@@RomaVilla thanks bro. I am actually gonna be moving the whole system into a different car soon and I'll be doing the big 3
@@JohnnyDriftZ3 nice bro, you going to post a video with the new ride too?
@@RomaVilla yes definitely. Just going to be a couple months but it'll come.
Do you have it wired down to 1 ohm on a rp2000?
Yeah w the gain set half way on the amp
I have mine the same way, but can't turn the gains up at all
Was this a custom box made or do you have a website to purchase it from?
Custom built
What size box n specs ?
@@Nitroxdude 36x13x24
@@Nitroxdude 2, 8 inch ports
U said that's 3 cubic feet?
what hits harder, 1 of these or 2 SVRs or 2 EVLs 12s?
Depends on box
I have 2 vxf12s on the skar prefab on a epicenter its slaps but do break in I'm half gain at 20 headunit volume 3/4 bass knob, and epicenter on some songs
Yo what you think and what would you compare it too
1500 watt rms sub not much else to say. hits hard
I run one on a SK2500.1 full gain lol
What do you mean full gain? What is that supposed to tell us?
Cause from my knowledge it means your clipping the hell outta your system...or so I thought...
ert wert from my research ya gotta match it to your head unit volume. I have a hu with lower voltage output than most so I compensate by turning the gain up, full gain on 2ohm, ~3/4 with 1 ohm. Half ohm now on 2 zvx 12s around 3/4 gain, no clipping.
What size box
Nitroxdude 3.0 cubic foot. Now I run 2 in a 5.6cuft box inverted 31hz