@@HomeRenoVisionDIY That is absolutely so true. There no such things - for the most part - as finding a contractor that you can rely on or afford - not in Chicago anyway.
its nice to just listen and focus on you working. im learning stuff and not thinking about my personal life and all the stress that comes with it. so thanks for that.
Wow! Jeff you taught class today. More than one plug on a circuit but only one circuit. Thank You. Planning for a large home addition. I will do a lot of work myself.
I've picked up a few tips & tricks, but mostly I just like watching you work and kibitz w/the camera guy. I like how you don't sweat the little things that go wrong.
Just a word of advice for terminating stranded wire, such as the dryer receptical. Always wiggle the wire (left to right, back and forth, as well as counter clockwise), after screwing down the connection, then screw it down some more. This will ensure a solid connection that will not work its way loose over time. This is the standard practice for every stranded wire termination in commercial electrical work in the IBEW.
What Jeff's using is cable. Wire is a single conductor (the ground wire) while cable is a bunch of little wires twisted together. Most new construction in the US is wire these days probably for the fact that there's a few extra building codes that come along with cable vs wire but I prefer working with cable if I can avoid wire. Larger gauge wire can be extraordinarily stubborn as hell to bend sometimes but stripping wire is a dream compared to stripping cable. It sounds like semantics but the difference is not trivial.
This is exactly what I was looking for! I plan on adding a bathroom to our mudroom and unfortunately it is on a slab, while the rest of the house is on a raised foundation. This seems like an easy solution to my problem!
I installed one of these pumps in my basement, but I chose to have the washer dump into a utility sink, and the sink into the pump. That way, if the pump ever fails or the gfci circuit trips, I don’t end up with gallons of water all over my floor
Video is only as good as the camera work! If u can't get a close-up it's worthless so kudos to whomever is working the camera & mkg sure yhey r capturing ur every move. 🥳🥳🥳🥳
I liked your already glued fitting removal trick. I've seen quite a few, but the sawzall+chisel method is nice and simple. Beats drilling anything out, or heating it up.
We buy, renovate distressed homes and rent them out them for passive income. We love you, I always watch you and learn! At times, I tell my husband, “that’s not what JT says” then he gives me a look that makes me smile. Lol, we both love you and watch you for a lot of projects. Your the best on RUclips to watch. 💕
My god... it would take me a month to do this, he does it in (edited version) in 30 minutes. HE makes me feel way more confident than maybe I should feel.
I greatly appreciate you showing the steps, and solutions. And the ability to rewind, watch again helps also. Thank you Jeff. I have shared some of the videos before, this one I will also.
No one will notice if you use the bigger cover plate, but they will def notice if you do a bad patch or need to patch and didn’t. Totally worth the extra money just in case.
Love this series Jeff. So much that’s relevant to the sleep-out to studio apartment renno I’ve been doing this year and at exactly the right time. Have you guys got me under surveillance?😂
The hard part is getting a vent in an existing structure. It has to be vented into the attic above the highest fixture in the house. That is at least code in my area
This is such a great video. The prospect of redoing my downstairs bathroom and finishing the neighboring laundry room is daunting. If I could afford to, it would have been done two years ago. The amount of work it's going to be and the cost is just...I'm going to be doing laundry with spiders for the next decade.
You won’t believe it, I just failed inspection today installing the same Saniflo pump because I used a PVC ball valve on the discharge line. The saniflo manual doesn’t mention anything, but plumbing code in my area does mention using a non-corrosive metal ball valve on discharge lines. I wish the rough in inspector had caught this mistake.
Very detailed video. From viewing the install it looks like the fixtures are flowing down to the saniflow and pumping up to the main waste line. If so this method would be a solution for me. For my project, I first need to flow down to the macerator and then pump up to my main soil pipe. This is required to have a proper slope while keeping a headroom of 6'-10". If I use a saniflow macerator behind the toilet, the toilet area would need to step down and be below the level of the bathroom for the slope of the shower and sinks to connect to the saniflow.
I would have ran the drainage pipe leaving the pump under the 240v outlet. Just in case, the pipe ever leaks (shouldn’t leak, but mysterious things happen) the water will be below the electrical. Just my personal preference.
I've always been taught to pigtail connections on an outlet vice running all the current through each outlet in series. that small clip on the outlet looks like the weak point that overtime would wear out from load cycling. that being said never had an outlet go bad so might just be adding needless work for myself.
Oh my gosh!!!!! Please stop ending your videos like this!!!! Idea for you- do a few shots of your finished project. On a different note, I love your videos so much! You do great work and I love all the information and experience you show us!!! Thank you!
Reminder to put a note at breaker box that you turned off the power incase someone unaware your wo4king on a 220 volt line. You skipped over a BIG safety issue. I still admire your videos,,,,,
Hi Jeff, I'm looking for that drain pipe cutter you've got there and having a bit of a hard time finding it. I've checked out your Amazon recommended items and just googled drain pipe cutter /ABS cutter with no luck. If you could point me in the right direction it would be appreciated. You make drain work look fast and easy with that tool and I would like to add it to my tool list. Thank you.
Lots of fittings there for that drain pump but looked pretty good in the end. I would have gone straight up with the outlet line and worked the vent around it, but that's just me....
I fast-forwarded. Took me a minute to realize the vent coming out of the top left of the unit wasn't piped into the outlet lol. Was like wth is going on here.
The current NEC requires laundry area receptacles to be GFCI protected. That might be done at the breaker, but it's less expensive and more convenient to use a GFCI receptacle. It's a top priority location to retrofit if you want to improve safety.
Am going to be replacing my washtub with a new one. The washer drains into it. Will have to install completely new piping. You make it look easy but I think I can make it work. Will be taking before pics. so I know how to reinstall the new plumbing with the right configuration with maybe a few adjustments.
WOW I have been waiting for some real saniflo installs. Can you use an indoor vent with it if you cannot get to house vent? Any experience with them failing?
I have the exact pump as well. So how did you end up running your air vent? AND- 1. Why did he run two air vents on this install? 2. Can you use an Air Admittance Valve “if” you can’t find a house vent.
Loved this! Great info and you make it look so easy. One thing - you looked very rushed in this video. You're usually much more relaxed. Hope all is well.
Great video !! I understand the laundry room should have a dedicated circuit of at least 20 amps, but why can't you have other circuits in a laundry room as well , if you chose to have separate 20 amp circuits ?
Good day. Thank you for all that you teach us. I have a question - I've seen many say it is best to - after attaching wire to the receptacle -wrap electrical tape around the receptacle to cover the screws. Is there a reason why you didn't do this after attaching the wiring to your receptacle? Thanks!
Hello, thanks for clip how ever, You are not allowed to use 90 degree Elbow fittings on Discharge pipes per manufacture recommendation and instruction. Just thought to let you know. Those 90 degrees bend needs to be 2x45 on each turn to make a 90 degree turn. I really like your videos and not intended to criticism.
Everyone has different skill levels. With that said, I've stripped out screws enough times in my life that I'm way safer using power tools for 90% of the tightening and hand tightening the last 10%.
If you listen to the sound of the impact you can tell it is on lvl one and has a pressure sensitive trigger. If you know what you are doing and are careful there will be no issues.
I remember you used ABS instead of cellular-core ABS pipe due to supply issues. Did that end up helping you avoid damaging the pipe when you removed the fitting?
Yes the same solution works with PVC in the states. Cut and chiseled out an old toilet flange via the same method during my bathroom reno. Shocked how smooth it came apart with a good ole thwack of a mallet and chisel
Jeff love your videos. Just a quick question when I read the specs on that Saniflo model it says washing machines must be indirect but you installed it directly. Any problems or are there any specific requirements to hook it up directly like you did? Thanks
I am huge fan of you guys for a number of reasons, the biggest one being your so informative and help me with my own home repairs. I am handing an 80lb medicine cabinet vanity. My bathroom studs are spaced 24” on center. The 4 pre-made mounting screw holes do not align with any of my studs. What would be the best way to secure this to the wall?
PTSD with all those fittings. I'd have to visit home depot probably 4x for this effort! Or buy like 90% of the HD stock and return everything after the project.
Can't do DIY in California for electrical or plumbing but that's only if you're getting permits. I'm out in the boonies so I don't have a choice since no trades person will come out my way no matter how much I bribe them 😭
I need to add a laundry room in a space next to my bathtub..can I use the bathtub drain to extend it and add a stand pipe for the washer drain.. would really help if you could make a detailed video explaining this as there is literally no content on RUclips to do this.
I can see how this would work with waste shower water but what does one do with the toilet drain considering what's being flushed down a toilet?? The pipes you installed here can't possibly drain toilet waste. Thanks🙂
All i want is laundry in my kitchen.. idc wat has to be done or really how it looks (willing to work around that) but this dummy (me lol) still couldn't do this! Damn it! Its ridiculously expensive to hire out for stupid laundry hook ups UGHHH 😫
Hi! Any recommendations on high-quality water pumps that can handle pumping up large amounts of water for a kitchen-sink and washer machine set-up in a basement? We live in split multi-level home (it's built on hill). The basement-kitchen/washer room is below ground level and our current water-pump is in the garage which is another level below the basement-kitchen/washer room. I'm thinking of buying a high quality pump and asking our landlord to handle the installation, so I can wash in the house instead of going to a laundromat. Our current pump was replaced by our landlord but it still overflows when we wash dishes so we cannot use a washer-machine despite here being hookups because it would flood our garage.
How long is a pump like that expected to last? Everything is custom fitted. You'd have to redo it all if the pump failed and that model wasn't available.
Hi Jeff I have a problem when I use my washing machine the water pipes making a lot of noise how can I fix that please could you give me an advice please thank you so much
Not quite on topic, but how do I keep my laundry room from leaking heat? The laundry room is the coldest room in the house. The new heat pump vent less dryers don't work for me - too small and too slow - so I am stuck with the hole in the side of my house for my dryer. What is the best way to minimize the heat loss from it?
Aren't those brass ball valve threads tappered? I have an irrigation backflow preventer that has a valve that drips and is a very common problem. The issue is when you have a male pvc say 1 1/2" connector to the female brass valve just using teflon tape the connection leaks. I read put the teflon tape on the pvc male then pipe dope over the tap This supposedly stops the drip. I haven't done it yet because was not sure of the correct process.Can you explain the correct way. This irrigation pipe is under extreme prezzure the city water pressure is insane.
I dont understand the reason for two air vents? I have this exact pump, but not planning on two vents. Im running a bar sink and a dishwasher into this pump. Do I need to run two air vents? Thanks
I have an issue with my ac drain not draining properly so it gets backed up and since it's a unit in the hallway ceiling in a townhome, landlord keeps having a guy come out to drain but it lasts a dent week then it leaks out. I need constant vacuum to drain hose to force water to come down and drain through the sink drain in the bathroom where the drain hose goes into. Would something like this be doable to install under a sink to suck the water out of drain instead of relying gravity which doesn't seem to work given the catch drain under condenser is old and doesn't allow a good drain from it so it over floods and leaks out and into the floor. That catch pan is part of complete AC unit so it's not available given that unit is 30+ years old DVD requires someone to take dimensions and create a replacement part.
"DIY is not just an option, it may be your only option". Excellent last quote and so true!
With the way things are going , who can find a contractor let alone afford one!
@@HomeRenoVisionDIY That is absolutely so true. There no such things - for the most part - as finding a contractor that you can rely on or afford - not in Chicago anyway.
great video
How to contact you I have a similar problem to solve
True words spoken this day and age. Likely every generation has said this.
@@HomeRenoVisionDIY rofl. The wife says it’s great till ya fk it up.
its nice to just listen and focus on you working. im learning stuff and not thinking about my personal life and all the stress that comes with it. so thanks for that.
Wow! Jeff you taught class today. More than one plug on a circuit but only one circuit. Thank You. Planning for a large home addition. I will do a lot of work myself.
I've picked up a few tips & tricks, but mostly I just like watching you work and kibitz w/the camera guy. I like how you don't sweat the little things that go wrong.
those outlets have a clear "wow" face seeing how good Jeff is at wiring
Just a word of advice for terminating stranded wire, such as the dryer receptical. Always wiggle the wire (left to right, back and forth, as well as counter clockwise), after screwing down the connection, then screw it down some more. This will ensure a solid connection that will not work its way loose over time. This is the standard practice for every stranded wire termination in commercial electrical work in the IBEW.
What Jeff's using is cable. Wire is a single conductor (the ground wire) while cable is a bunch of little wires twisted together. Most new construction in the US is wire these days probably for the fact that there's a few extra building codes that come along with cable vs wire but I prefer working with cable if I can avoid wire. Larger gauge wire can be extraordinarily stubborn as hell to bend sometimes but stripping wire is a dream compared to stripping cable. It sounds like semantics but the difference is not trivial.
This is exactly what I was looking for! I plan on adding a bathroom to our mudroom and unfortunately it is on a slab, while the rest of the house is on a raised foundation. This seems like an easy solution to my problem!
By far, the best DIY videos I’ve found so far. Thank you for the knowledge man, keep it up!!
I installed one of these pumps in my basement, but I chose to have the washer dump into a utility sink, and the sink into the pump. That way, if the pump ever fails or the gfci circuit trips, I don’t end up with gallons of water all over my floor
Excellent idea!!!
If the breaker trips the washer should stop pumping.
@@don2deliver 😂
Quality plumbing 101 stuff here. Also, I really appreciated the great camera work in this episode. Great job team!
Yes, very good camera work! I agree!. It was a bit shaky and out of focus on the shower walls install.
What a PITA that is some 1337 plumbing skillz!!!
Glad you enjoyed it!
Video is only as good as the camera work! If u can't get a close-up it's worthless so kudos to whomever is working the camera & mkg sure yhey r capturing ur every move. 🥳🥳🥳🥳
I liked your already glued fitting removal trick. I've seen quite a few, but the sawzall+chisel method is nice and simple. Beats drilling anything out, or heating it up.
We buy, renovate distressed homes and rent them out them for passive income.
We love you, I always watch you and learn!
At times, I tell my husband, “that’s not what JT says” then he gives me a look that makes me smile.
Lol, we both love you and watch you for a lot of projects.
Your the best on RUclips to watch.
💕
on the bingewatch of HRV and watching Jeff get better, older and Max handier with the cam in the latest videos is just as fun
Nice of you to say but can't take credit for that one we have a young gun Ian filming this one. I took some time off during this one ;)
@@SubdivisionAuto that's great either way, love the whole crew anyways.
My god... it would take me a month to do this, he does it in (edited version) in 30 minutes. HE makes me feel way more confident than maybe I should feel.
Watching Jeff do plumbing is like watching him play with legos lol, its interesting how it all comes together
"lol"
🤦🏻♂️
I appreciate all of your content. I don’t have a plumbing project but having a little glimpse into the info is super helpful understanding! Thank you!
I greatly appreciate you showing the steps, and solutions. And the ability to rewind, watch again helps also. Thank you Jeff. I have shared some of the videos before, this one I will also.
Gotta love watching this! All these DIYs sure have this satisfying vibe to them. Great work!
Yes!! “Utility” type content is appreciated! It’s likely more important then the “sexy” stuff! Great vid-very informative.
31:50 The 90 degree was only dry-fitted... May want to look at that... ;)
Great video and excellent attitude, thanks guys!
I thought the same thing but there was a cut on the video and he was about to apply the solvent to that end
There will be another interesting episode after the inspector sees the plumbing I think.
This was enjoyable to watch
No one will notice if you use the bigger cover plate, but they will def notice if you do a bad patch or need to patch and didn’t. Totally worth the extra money just in case.
Love this series Jeff. So much that’s relevant to the sleep-out to studio apartment renno I’ve been doing this year and at exactly the right time. Have you guys got me under surveillance?😂
Loving it!
The hard part is getting a vent in an existing structure. It has to be vented into the attic above the highest fixture in the house. That is at least code in my area
My husband giggled and giggled about your vice grips comment. 😂
This is such a great video. The prospect of redoing my downstairs bathroom and finishing the neighboring laundry room is daunting. If I could afford to, it would have been done two years ago. The amount of work it's going to be and the cost is just...I'm going to be doing laundry with spiders for the next decade.
“This will fit like a glove”
*struggles*
Too real 😂
You won’t believe it, I just failed inspection today installing the same Saniflo pump because I used a PVC ball valve on the discharge line. The saniflo manual doesn’t mention anything, but plumbing code in my area does mention using a non-corrosive metal ball valve on discharge lines. I wish the rough in inspector had caught this mistake.
You are such a COOL DUDE!!!!!!
LOL, Cheers Matt!
Very detailed video. From viewing the install it looks like the fixtures are flowing down to the saniflow and pumping up to the main waste line. If so this method would be a solution for me. For my project, I first need to flow down to the macerator and then pump up to my main soil pipe. This is required to have a proper slope while keeping a headroom of 6'-10". If I use a saniflow macerator behind the toilet, the toilet area would need to step down and be below the level of the bathroom for the slope of the shower and sinks to connect to the saniflow.
When the ejector pump kicks on, doesn't the drain line rack a lot from the pressure? interested to know if you clamped it to the wall?
I would have ran the drainage pipe leaving the pump under the 240v outlet. Just in case, the pipe ever leaks (shouldn’t leak, but mysterious things happen) the water will be below the electrical. Just my personal preference.
This was pretty neat
This guy is who we call a Javier. Specializes in el Mickey Mouse of the trades.
I've always been taught to pigtail connections on an outlet vice running all the current through each outlet in series. that small clip on the outlet looks like the weak point that overtime would wear out from load cycling. that being said never had an outlet go bad so might just be adding needless work for myself.
"This floor's low-ing" - I know exactly what Jeff meant but I just can't stop giggling. That needs to be a t-shirt.
Time stamp that.
Oh my gosh!!!!! Please stop ending your videos like this!!!! Idea for you- do a few shots of your finished project. On a different note, I love your videos so much! You do great work and I love all the information and experience you show us!!! Thank you!
Reminder to put a note at breaker box that you turned off the power incase someone unaware your wo4king on a 220 volt line. You skipped over a BIG safety issue. I still admire your videos,,,,,
Thank you Jeff!
Your the husband I have always dreamed about.
Hi Jeff, I'm looking for that drain pipe cutter you've got there and having a bit of a hard time finding it. I've checked out your Amazon recommended items and just googled drain pipe cutter /ABS cutter with no luck. If you could point me in the right direction it would be appreciated. You make drain work look fast and easy with that tool and I would like to add it to my tool list. Thank you.
Lots of fittings there for that drain pump but looked pretty good in the end. I would have gone straight up with the outlet line and worked the vent around it, but that's just me....
i get it but on a pump it makes no difference the trick is to have that 1 degree slope after it takes the turn and becomes a gravity situation.
How did the outlet at 9:18 magically change from a regular outlet to one of the decorative style? :-)
Sorcery....
Oh I see that I'm not the only one who noticed. Good eye, BMW 37!
I fast-forwarded. Took me a minute to realize the vent coming out of the top left of the unit wasn't piped into the outlet lol. Was like wth is going on here.
Jeff is the best hack this side of the Canadian border! Love ya Jeff, you old fart!
Cheers Keith!
13:08, dumb question here, but aren't you required (or is it safer) to install a GFCI in this area, due to the plumbing being in close proximity?
Yea I was curious about this too. I thought it needed to be GFCI if it's within 6ft of a water source, unless it feeds to another branch circuit.
The current NEC requires laundry area receptacles to be GFCI protected.
That might be done at the breaker, but it's less expensive and more convenient to use a GFCI receptacle. It's a top priority location to retrofit if you want to improve safety.
Am going to be replacing my washtub with a new one. The washer drains into it. Will have to install completely new piping. You make it look easy but I think I can make it work. Will be taking before pics. so I know how to reinstall the new plumbing with the right configuration with maybe a few adjustments.
You can do it!
WOW I have been waiting for some real saniflo installs. Can you use an indoor vent with it if you cannot get to house vent? Any experience with them failing?
I have the exact pump as well. So how did you end up running your air vent?
AND-
1. Why did he run two air vents on this install?
2. Can you use an Air Admittance Valve “if” you can’t find a house vent.
Loved this! Great info and you make it look so easy. One thing - you looked very rushed in this video. You're usually much more relaxed. Hope all is well.
@9:20, aaaah why did your conventional style outlet change to a decora style outlet lol.
people are drawn to your sarcasm and ability to teach. Where all here to learn eny thing you have have to offer.
Cheers Happy to share my journey!
Great video !! I understand the laundry room should have a dedicated circuit of at least 20 amps, but why can't you have other circuits in a laundry room as well , if you chose to have separate 20 amp circuits ?
He means that the laundry room circuit must be dedicated to the laundry room.
thank you. love you
No problem 😊
Good day. Thank you for all that you teach us. I have a question - I've seen many say it is best to - after attaching wire to the receptacle -wrap electrical tape around the receptacle to cover the screws. Is there a reason why you didn't do this after attaching the wiring to your receptacle? Thanks!
wrapping it in tape is done so you can remove without turning off the breaker. I prefer to turn off the breaker. Cheers!
Hello, thanks for clip how ever, You are not allowed to use 90 degree Elbow fittings on Discharge pipes per manufacture recommendation and instruction. Just thought to let you know. Those 90 degrees bend needs to be 2x45 on each turn to make a 90 degree turn. I really like your videos and not intended to criticism.
Thank you for your good advice-:)
A solvent should melt the pieces together. That’s why it’s called solvent weld
it does but not as effectively as you might think. it more like bonds each pipe to the solvent which can be peeled off the pipe if needed.
No oscillating tool on that pipe cut?
I think an oscillating tool would have been little easier to use up against the wall like that
I can't say I am overly fond of using an impact on wire terminals. I would recommend hand tightening those.
Everyone has different skill levels. With that said, I've stripped out screws enough times in my life that I'm way safer using power tools for 90% of the tightening and hand tightening the last 10%.
If you listen to the sound of the impact you can tell it is on lvl one and has a pressure sensitive trigger. If you know what you are doing and are careful there will be no issues.
Need to use long sweep or 2 45 for discharge per instructions
And discharge size must be 3/4 or 1 inch. Can only increase when using gravity to drain (basically after the vertical run.
What pipe cutters are being used? I like them.
I remember you used ABS instead of cellular-core ABS pipe due to supply issues. Did that end up helping you avoid damaging the pipe when you removed the fitting?
makes no difference , that trick works on every abs. Cheers!
Question Doesn't the outlet where the pump supposed to be connected most be a GFCI outlet ? I'm confused now :(🤔
Love watching the work but I'm just trying to figure out what exactly the layout of this place is.
Clever technique on the ABS fitting removal. Does that also work for PVC?
To be honest Robert I have no Idea. I have very little experience with that material.
Yes the same solution works with PVC in the states. Cut and chiseled out an old toilet flange via the same method during my bathroom reno. Shocked how smooth it came apart with a good ole thwack of a mallet and chisel
Nice work. Don’t you have to add a back flow valve before tha ball valve?
its better to use 2 45s then a 90 for the drain because of clogging
Jeff love your videos. Just a quick question when I read the specs on that Saniflo model it says washing machines must be indirect but you installed it directly. Any problems or are there any specific requirements to hook it up directly like you did? Thanks
So the washer is going directly into the pump ? I’m asking cause that’s what I’m doing next week
I am huge fan of you guys for a number of reasons, the biggest one being your so informative and help me with my own home repairs. I am handing an 80lb medicine cabinet vanity. My bathroom studs are spaced 24” on center. The 4 pre-made mounting screw holes do not align with any of my studs. What would be the best way to secure this to the wall?
I would think nailing long blocks to the inside of the studs would work, making certain that they are fastened well enough to handle the load.
Hey do you have a video on vinyl shower pan installs I found most of you shower videos just haven't seen that one
"Black to Brass, Neutral to Nickel"
I need a pipe cutter, PVC, glue/Primer, and fast cutting pipe like the ones you have
any one else notice the switch of plugs, i was wonderig why he was going with the old style plugs on a new build
simple supply issues. had to resort back to the old face. Cheers!
Cool
hey bro normal we dont use a tee on the horizontal for drainage,a combo t,y or a y with a street 45
PTSD with all those fittings. I'd have to visit home depot probably 4x for this effort! Or buy like 90% of the HD stock and return everything after the project.
Can't do DIY in California for electrical or plumbing but that's only if you're getting permits. I'm out in the boonies so I don't have a choice since no trades person will come out my way no matter how much I bribe them 😭
I thought you shouldn’t have water close to electrical is it different for washer installation
love the videos learned lots so far
As long as the receptical is GFCI protected, which can be done at the breaker, there is no issue.
Could you let me know where you bought that pipe cutter please the orange one thank you!, by the way great work!
Is the new editing style driving anyone else crazy? There are so many cuts in the videos recently. Even in the middle of sentences.
I did the same thing, but instead of cutting it I just reheated the pipe ( not hot enough to deform the pipe) and twisted off.
I need to add a laundry room in a space next to my bathtub..can I use the bathtub drain to extend it and add a stand pipe for the washer drain.. would really help if you could make a detailed video explaining this as there is literally no content on RUclips to do this.
I would put a strap on that lateral on the high side to preserve that slope. The silicone coupler will probably sag over time.
I can see how this would work with waste shower water but what does one do with the toilet drain considering what's being flushed down a toilet?? The pipes you installed here can't possibly drain toilet waste. Thanks🙂
It's basically a slug pump and box. looks like a nice replaceable option.
the toilet is existing and goes to the septic field.
@@HomeRenoVisionDIY right! So then why not just tap into the toilet drain for the shower? I'm confused.....
Nice
What is that white box thing you are connecting the pipes to ?
All i want is laundry in my kitchen.. idc wat has to be done or really how it looks (willing to work around that) but this dummy (me lol) still couldn't do this! Damn it! Its ridiculously expensive to hire out for stupid laundry hook ups UGHHH 😫
Where can I get the pipe cutter? Thanks
Is there any advantage over clear or black plastic for a crawl space vapor barrier or does it all do the job the same?
Hi! Any recommendations on high-quality water pumps that can handle pumping up large amounts of water for a kitchen-sink and washer machine set-up in a basement? We live in split multi-level home (it's built on hill). The basement-kitchen/washer room is below ground level and our current water-pump is in the garage which is another level below the basement-kitchen/washer room.
I'm thinking of buying a high quality pump and asking our landlord to handle the installation, so I can wash in the house instead of going to a laundromat. Our current pump was replaced by our landlord but it still overflows when we wash dishes so we cannot use a washer-machine despite here being hookups because it would flood our garage.
How long is a pump like that expected to last? Everything is custom fitted. You'd have to redo it all if the pump failed and that model wasn't available.
Hi Jeff I have a problem when I use my washing machine the water pipes making a lot of noise how can I fix that please could you give me an advice please thank you so much
Not quite on topic, but how do I keep my laundry room from leaking heat? The laundry room is the coldest room in the house. The new heat pump vent less dryers don't work for me - too small and too slow - so I am stuck with the hole in the side of my house for my dryer. What is the best way to minimize the heat loss from it?
Aren't those brass ball valve threads tappered? I have an irrigation backflow preventer that has a valve that drips and is a very common problem. The issue is when you have a male pvc say 1 1/2" connector to the female brass valve just using teflon tape the connection leaks. I read put the teflon tape on the pvc male then pipe dope over the tap This supposedly stops the drip. I haven't done it yet because was not sure of the correct process.Can you explain the correct way. This irrigation pipe is under extreme prezzure the city water pressure is insane.
I dont understand the reason for two air vents? I have this exact pump, but not planning on two vents. Im running a bar sink and a dishwasher into this pump. Do I need to run two air vents? Thanks
Yooo Jeff what is that tool called to cut the abs pipe?
I have an issue with my ac drain not draining properly so it gets backed up and since it's a unit in the hallway ceiling in a townhome, landlord keeps having a guy come out to drain but it lasts a dent week then it leaks out. I need constant vacuum to drain hose to force water to come down and drain through the sink drain in the bathroom where the drain hose goes into. Would something like this be doable to install under a sink to suck the water out of drain instead of relying gravity which doesn't seem to work given the catch drain under condenser is old and doesn't allow a good drain from it so it over floods and leaks out and into the floor. That catch pan is part of complete AC unit so it's not available given that unit is 30+ years old DVD requires someone to take dimensions and create a replacement part.