Phải có sức khỏe, học thức, niềm đam mê và sự kiên nhẫn mới làm được những công việc phục hồi động cơ hư hỏng phức tạp như thế này. Bạn quả là một nhân tài trẻ đáng quý của Việt Nam!
I think I am going to go out and find me an old 4 cylinder Nissan Diesel engine now...I just cannot believe my eyes and ears on this one. To come so far from where it started off as and run with no oil or water all while leaking diesel like a siv. I myself have been a mechanic for 20 years...I simply do not have this man's magical talent. 😂
Спасибо большое!! Видна работа, а не замена на новое, понятно, что прокладки сгнили, везде песок, всё промыто, прочищено, смазано и налажено!! Очень приятно, прям тепло на душе!! Золотые руки!!
Какой нахер труд, да это пздц,разобрал почистил собрал, где замер зазоров, где сцук Динамо метрической ключ, да блин ремень ГРМ и ролики это одноразовые вещи, где прокладка гбц, где масло насос, где масло, что эт за пздц
Felt the same way, not even sure it would have been worth adding to the scrap pile as bad as it was looking. Most impressive to have had the patience to bring it back
@@matthiasweigel311 It doesn’t matter, many components were totally destroyed by the sea water and air, and yet he achieved what he said he was going to do, he got the engine to run. It was entertaining to watch, a project I most certainly would not have ever contemplated. Well done to him, and I hope he gets paid well off YT for his efforts.
Thank you very much. Most mechanic workshops do not have this experience. Rather, they only replace parts, and most of the time they are not really the cause of the problem. Thank you, great work.
And he did not disappoint. I’m impressed with the techniques in removing rusty bolts. I’ve repaired a water damaged engine before but this takes it to a whole new level. The amount of the old engine you were able to re-use is staggering. Electrolysis is another way of removing rust. Well done.
@@CircleViolence I understand that. The state of the injector pump was not going to last. Just the mere fact that he managed to get the engine to run is impressive given the state of it.
To say that was amazing is an understatement, the amount of work that you must have put in to get that engine running must have been very long. You are an incredibly talented and knowledgeable man.
@@damiann4734 There are a lot of videos on YT showing how they fake, this type is called a "mild fakes" as opposed too "strong fakes". Lets be honest, to call this a restoration is extremely misleading.
I was amazed that they could fix the engine in such a miserable condition and get it running. And I was even more surprised that the engine was a Nissan engine. Thank you for this wonderful video full of surprises.
Absolutely amazing work! If I was able to, I'd employ you as an engineer any day! You're clearly the man to know during the apocalypse. Nissan should sponsor you with a fully kitted out workshop. Again, absolutely amazing job! 👍👍
I honestly wasn't sure if your videos are real or not because you tackle such impossible looking projects that seem gone past the point of no return, , and this one definitely is real. Great work ! My God, it's like a brand new NISSAN made in Japan motor for FREE, just add time and experience. You're a legend.
ТНВД, топливные дизельные форсунки.... это... невероятно!!!!! Когда я увидел что он привез, первая мысля была... С ним как с археологической находкой, сканировать, варить и отливать все заново. Ну или как минимум, прожигать в камере, проваривать в кислоте, после этого промывать высоким давлением. И только после этого осматривать, дефектовать и ~70%-90% изготавливать или заказывать зч с нуля. У нас на предприятии, валяется 2-а огромных дизель-двигателя от ЖД (под открытым небом гниют уже более 10-ти лет, только при мне) и куча всего по мелочи. Места занимают, ни как время не доходит все это как-то разломать и выкинуть на свалку. Цена вывоза этого мусора практически сопоставима с ценой, сколько выручим за это гнилье... А сделать такое восстановление с минимальным набором инструментов практически на коленке... Фантастика.
Damn that is impressive work. I know it isn't running perfectly but considering the shape that engine was in just running is awsome. Thank you for posting.
Well, i have never seen ANYTHING like that in my life!!! It puts into perspective what i have to do to my 1942 International W6 tractor engine completely!! Well done my friend👍👍👍 Just dont show the END of the video at the beginning in future, it spoils it a bit👍
I really hope this is real. The thought of mr Ho being this skilled just makes me feel good about the world. Also, pro tip: watch it at half speed, the enjoyment lasts twice as long
The hard work was definitely very real, the piston he replaced was unavoidable and with a few more parts to get the oiling system working again it could no doubt be run for long periods but I don't think that was the point, I think the point was to get it to run again and that he did. I thought it was very cool and entertaining to watch, I especially liked the bit with the old bloke making the head gasket.
Te felicito amigo...excelente tu trabajo...como saves hacer de todo...que hermoso don...te regalo Dios...que sigan los éxitos...abrazo desde Argentina chaco
Irmão e disso que eu falo recuperar um motor abandonado , travado e todo enferrujado , você operou um verdadeiro milagre , gostei , parabéns , estou impressionado com seu trabalho , que não foi facil , agora e pintar que fica mais top ainda , parabéns , show , excelente trabalho
Ty for uplifting me brother with your great example of dedication, work ethic and great camera skills! You inspire people like me and others around the world. Bless you much love and success brother!
Tôi thực sự thích video của bạn, chúng rất tốt, bạn có thể khôi phục bất kỳ động cơ nào. Gosto muito dos seus vídeos são muito bons, você consegue recuperar qualquer motor.
Это жесть. Мотор поднят для одного запуска, больше всего мне было интересно про ремень грм, сальники и прокладки, думал, купит ли он хоть одну новую деталь)) но нет, всё нормально 😅 Однозначный лайк за проделанную (но к сожалению бессмысленную работу)! Думаю монетизация от ютуба всё оправдывает, но просто жалко труд, т.к. это творение просто в чермет пойдёт в итоге
The tongue is speechless when I saw it for the first time. I said it is impossible to restart that engine because of the rusty state it was in because of sea water. But with will and love for work, experience, mastery and skill, the engine is back to work again. You deserve a million likes.🎉🎉🎉🎉🎉🎉🎉
Iv watched hundred's of restoration videos, and this my friends far exceeds anything else, a true mechanical genius, thankyou brother, you have shown me a mechanical miracle!! ✌️
Lên youtube mới thấy, người nước ngoài khen ngợi tôn trọng a bao nhiêu. Fb với Tik Tok rác của VN sỉ vạ nhục mạ a bấy nhiêu. Một số thành phần thật lạ, cùng là đồng hương với nhau mà cứ thích hạ bệ nhau chê bai đủ điều mặc dù không biết họ đã làm được 1 góc của a hay chưa.... Thôi thì chúc a chân cứng đá mềm cứ theo đuổi đam mê youtube và ra nhiều video clip chất lượng tiếp theo a nhé. Cảm ơn a
That's nuts! I'm surprised it ran at all! Hopefully after you build a little stand for it, hookup some cooling water and give it another go, it will bed the rings and valves in and run smoothly.
This guy loves machines and exploring ways to rehab the seemingly impossible! Fabricating his owner head gasket alone is impressive! I wonder how the engine is to be later put to use.
It looks like the head gasket was fabricated by another person. You can tell by the more “seasoned” hands, that this is a more experienced professional. Still the whole restoration process was very impressive, it was awesome to watch!
Thank you for your interest and comment❤
cảm ơn các cô chú anh chị và các bạn đã quan tâm và theo dõi ❤
چرا روغن دیگه نریختین داخلش؟؟
Em nghĩ anh nên dành chút thời gian tương tác với các khán giả yêu quý của anh nhiều hơn, ! Chắc chắn kênh của anh sẽ rất phát triển.
Youre the BEST MAN
Absolutely, totally amazing and hard work 👌🙌
Это вам спасибо за наслаждение, которое приносят ваши видеоролики.
Phải có sức khỏe, học thức, niềm đam mê và sự kiên nhẫn mới làm được những công việc phục hồi động cơ hư hỏng phức tạp như thế này. Bạn quả là một nhân tài trẻ đáng quý của Việt Nam!
😊😊
Kỹ sư học xong không có đất dụng võ, đành về quê ở ẩn 😂
I'm a mechanic in the US and brother I'm absolutely impressed with your abilities. Highly resourceful and determined.
😅
at least he forgot to torque the bolts
@@vuvinh2032he didn't forget, he used the good'ol good and tight haha
He should be a mechanic in the states. He would blow most out of the water with his talents.
Ahhh the twin overhead cam, just littering the shore...
Lovely flute music while you masterbate 👍 Stop wanking!!!
I’m a mechanic from south wales uk , I wish I was patient like you , I’m very impressed with your hard work
I’m sorry but this has to be fake
@26715
I was WAITING for some drooling moron to make that stupid comment.
Thanks for not disappointing, fool.
@@26715 prove it?
@@26715thật sự chứ giả gi anh
*_Another perfect restoration. Thank you for sharing it. Keep up the fantastic work._*
That engine was dead to rights, but you pulled out a miracle and brought it back to life. I was impressed with the whole project!
Nissan motor company should sponsor him a complete workshop, and use this as a commercial on their engine`s. impressive work!! :)
Просто двигатели Nissan на столько выносливые что их не только море не может убить но и кривые руки
I think I am going to go out and find me an old 4 cylinder Nissan Diesel engine now...I just cannot believe my eyes and ears on this one. To come so far from where it started off as and run with no oil or water all while leaking diesel like a siv. I myself have been a mechanic for 20 years...I simply do not have this man's magical talent. 😂
Actually he is the owner of Nissan company..this is a secret between us
They should also gifted him a Navara so he have a proper truck to go out and work!!
@@MrPagecat Bạn thật hài hước, tôi thích điều đó,haha
già rồi mà khi cem tôi đã quá ngưỡng mộ, một tài năng khó tìm có sau này, chúc em luôn sức khoẻ
My
@@harigovind1534รึ
@@harigovind1534 llllkllll
Pm
Ol
L
L
L
Oopmol
L
Lpm LM
Lo
9l
O(｡≧ʕ•ﻌ•ʔ
Pl
L
≧ω≦:)):-$:-$o
Nissan should buy the engine and put it into their museum (firing it up regulary). What an amazing job!
@@apocapocpocapoc1560nissan ld20 _500$
Отличный мастер- механник!
Достоен ввсочайшего уважения!❤❤❤!!!
just astonishing ! ... Mr Ho has to be the best engine restorer on RUclips
After I die please call Mr Ho to bring me back to life...He should be a heart surgeon not a junk restorer! Genius!
great work. first time i have ever seen a home made headgasket.
Quá giỏi ,coi đi coi lại vẫn thấy khâm phục . Chúc a luôn nhiều sk và thành công
Молодец. У тебя золотые руки. Не бросай заниматься любимым делом. Снимай видео. А мы тебе будем рады поставить лайк. Из России с любовью.🇷🇺
Проделана большая работа по восстановлению этого хлама , это сколько нужно иметь терпения и энтузиазма. Респект к тебе дружище !
Он как археолог рылся в нем))
Рылся рылся и завёл без масла и охлаждайки)@@dimkacras
Этот двигатель все равное не для эксплуатации, поэтому какая разница))
Вряд ли бы он запустился без масла@@rostislavchuruta7024
Great Video, Loved it! and thank you for taking us along on this restoration, Mark from Australia! 😀
Спасибо большое!! Видна работа, а не замена на новое, понятно, что прокладки сгнили, везде песок, всё промыто, прочищено, смазано и налажено!! Очень приятно, прям тепло на душе!! Золотые руки!!
Пзазазазвх надеюсь это сарказм?
@@Devariant99 а ну ещё супротэк конечно же, бро 👍😆
Прлучил большое удовольствие от просмотра! Спасибо за ваш труд! Привет из России!☺️
Thank you for your interest and comment
@@Mr_Ho Россия здесь, мы смотрим вас! Спасибо за залипательный контент!
@@snowdannat не стыдно признаваться что ты из Соссии? Это же сейчас как клеймо фашиста.
@@snowdannat росія в сраці, хіба що
Какой нахер труд, да это пздц,разобрал почистил собрал, где замер зазоров, где сцук Динамо метрической ключ, да блин ремень ГРМ и ролики это одноразовые вещи, где прокладка гбц, где масло насос, где масло, что эт за пздц
Привет, брат! Не перестаёшь удивлять золотыми руками!) С любовью из России!))
người Việt Nam cũng yêu nước Nga của bạn !
Watched all three parts. Excellent rebuild!!! 🙏😲
Nissan!! Toyota!! Destrucción imposible!!! Saludos desde Argentina!!
Wouldn't have touched that engine with a ten foot pole. You're a legend.
Felt the same way, not even sure it would have been worth adding to the scrap pile as bad as it was looking. Most impressive to have had the patience to bring it back
It'll blow up in 30 minutes....
he didn't even change the O ring on the pump....
@@matthiasweigel311 It doesn’t matter, many components were totally destroyed by the sea water and air, and yet he achieved what he said he was going to do, he got the engine to run.
It was entertaining to watch, a project I most certainly would not have ever contemplated.
Well done to him, and I hope he gets paid well off YT for his efforts.
It was an extreme gamble with the cylinder bore and bearing surfaces, but his machining skills made the difference👍
Thank you very much. Most mechanic workshops do not have this experience. Rather, they only replace parts, and most of the time they are not really the cause of the problem. Thank you, great work.
And he did not disappoint. I’m impressed with the techniques in removing rusty bolts. I’ve repaired a water damaged engine before but this takes it to a whole new level. The amount of the old engine you were able to re-use is staggering. Electrolysis is another way of removing rust. Well done.
I hope you understand that restoration like this - for video and restoration for normal work - is two different restoration
@@CircleViolence Это для вас😊 Для них, это нормально будет работать и выполнять свои функции.😊
んー素晴らしい、の一言です。
@@CircleViolence I understand that. The state of the injector pump was not going to last. Just the mere fact that he managed to get the engine to run is impressive given the state of it.
yang terpenting dia bisa menghidupkan mesin tua kembali
Tôi thích những video mà bạn làm, người anh em, tôi muốn nó giống như bạn đã tự làm mọi thứ, lời chào từ Indonesia🙏🙏
Reo hò! Reo hò! Reo hò! Xin chúc mừng nồng nhiệt rất nhiều sự ngưỡng mộ và trên hết: Cảm ơn bạn!
Brilliant video !. Very well done ! 👍👍
To say that was amazing is an understatement, the amount of work that you must have put in to get that engine running must have been very long. You are an incredibly talented and knowledgeable man.
Video Bellissimo, siete di una bravura fantastica, Like e iscrizione strameritati. Saluti dall' ITALIA. ❤🤍💚
This was the most impressive engine restoration I've ever seen in my life
These videos are fake, theres countless YT videos showing how they do it.
@@uhtred7860That's lie.
@@uhtred7860 I don’t think this is fake dude, he just got the engine to run for a couple minutes for the video and that’s it. How would you fake that
@@uhtred7860the Indians electricity ones are fake. Hard to fake with an engine while the valve cover still showing leaks everywhere lol
@@damiann4734 There are a lot of videos on YT showing how they fake, this type is called a "mild fakes" as opposed too "strong fakes". Lets be honest, to call this a restoration is extremely misleading.
I was amazed that they could fix the engine in such a miserable condition and get it running. And I was even more surprised that the engine was a Nissan engine. Thank you for this wonderful video full of surprises.
Смотрел и ждал с превеликим удовольствием. Респект и уважение на сложный проделанный путь👍👍👍
teruslah berinovasi,man😊😊😊😊😊😊😊
Absolutely amazing work! If I was able to, I'd employ you as an engineer any day! You're clearly the man to know during the apocalypse. Nissan should sponsor you with a fully kitted out workshop. Again, absolutely amazing job! 👍👍
* Em Hồ giỏi thật. Cố gắng không ngừng em nhé, chúc em và gia đình luôn vui vẻ, hạnh phúc.
I honestly wasn't sure if your videos are real or not because you tackle such impossible looking projects that seem gone past the point of no return, , and this one definitely is real. Great work !
My God, it's like a brand new NISSAN made in Japan motor for FREE, just add time and experience. You're a legend.
Excellent work.. as a marine engineer myself i thought the job was impossible. And i thank you as i picked up some nice techniques i could use
You are not just a technician you are an artist...
ทุกวันนี้ ชั่นนี้ ฉุดเพราหน้า รุ้เรื่อง เครื่องยังเดะอยู่เลย ฮาๆ ไช้ไปดูแลกันไป รุ่นน้อง ๆ หันมองกันให้ เมื่อเจอมันวิงบนถนน เขาแน่จริง น่ะ ยี้ห้อนี้..... จัดไปๆ ดีก็ชมและชื่นชมจริงๆครับท่าน เหนื่อฟ้ายังมีฟ้า..... ช่าง ฮีโรแมนๆ
I am blown away that you got this started. Best part is there wasn't a torque wrench in sight.
yeah, is not gonna durable enought
Yes, my small arm strength says bolt torque, not my keyboard skill.. 😂
Timing belt broke? All for naught? Great video. Just the fuel pump alone, let alone the head gasket.
Quando eu vi, logo pensei que era mais fácil vender como sucata. Impressionante o trabalho desse rapaz. Ressuscitou defunto!
ТНВД, топливные дизельные форсунки.... это... невероятно!!!!!
Когда я увидел что он привез, первая мысля была... С ним как с археологической находкой, сканировать, варить и отливать все заново. Ну или как минимум, прожигать в камере, проваривать в кислоте, после этого промывать высоким давлением. И только после этого осматривать, дефектовать и ~70%-90% изготавливать или заказывать зч с нуля. У нас на предприятии, валяется 2-а огромных дизель-двигателя от ЖД (под открытым небом гниют уже более 10-ти лет, только при мне) и куча всего по мелочи. Места занимают, ни как время не доходит все это как-то разломать и выкинуть на свалку. Цена вывоза этого мусора практически сопоставима с ценой, сколько выручим за это гнилье...
А сделать такое восстановление с минимальным набором инструментов практически на коленке... Фантастика.
Золотые руки у тебя в наше время редкость.👍
Надеюсь это сарказм.....?
Он без масла его запустил, этот мотор труп
А крышка тебя не смущает? 🤣🤣🤣🤣🤣
You are the best at what you do. Very excellent work.
Колосальный труд! Да еще изготовить прокладки с кольцами, востановить подшипники, всякие крышечки и тому подобное изготовить на коленке.☺
Have a nice day bro. Excellent n smart, nice jobs💪💪
Золотые у тебя руки дружище 👍😎
Bạn giỏi và khéo tay quá. Xin chúc mừng! 😉❤👍🏻
Damn that is impressive work. I know it isn't running perfectly but considering the shape that engine was in just running is awsome. Thank you for posting.
bạn rất giỏi... tôi rất thích những chiếc thuyền bạn chế, nên dành thời gian cho việc đấy nhé, tôi rất muốn có được 1 chiếc xuồng bạn chế đó
Well, i have never seen ANYTHING like that in my life!!!
It puts into perspective what i have to do to my 1942 International W6 tractor engine completely!!
Well done my friend👍👍👍
Just dont show the END of the video at the beginning in future, it spoils it a bit👍
Quá tuyệt vời
Bạn kiên trì và rất thông minh
❤❤❤❤❤❤
I didn't believe that you would be able to restore such a rusty engine.... Well done, good job!
ABSOLUTELY AMAZING! I've never seen anyone resurrect an engine that far gone! IMPRESSIVE!!!👍
Well Done Mate!
I really hope this is real. The thought of mr Ho being this skilled just makes me feel good about the world. Also, pro tip: watch it at half speed, the enjoyment lasts twice as long
The engine was real real crusty. The restoration was real at least.
In what way could this not be real
The hard work was definitely very real, the piston he replaced was unavoidable and with a few more parts to get the oiling system working again it could no doubt be run for long periods but I don't think that was the point, I think the point was to get it to run again and that he did.
I thought it was very cool and entertaining to watch, I especially liked the bit with the old bloke making the head gasket.
Congratulations Impressed Stephane from Brazil.
Bạn ko những giỏi mà còn có tinh thần bất diệt, ko có gì làm Bạn chùn bước. Mình rất rất hâm mộ Bạn ❤❤❤
Amazing job man, Too amazing what you've done! Congratulations!
Не, ну это просто колоссальный труд 💪🏻 Мое почтение! Как всегда получил огромное удовольствие от просмотра❤️🔥
Te felicito amigo...excelente tu trabajo...como saves hacer de todo...que hermoso don...te regalo Dios...que sigan los éxitos...abrazo desde Argentina chaco
best rescue/rebuild video I have seen yet on RUclips. Well done, sir! Subbed..
you so smart brother.respect.from iraq🥰🥰🥰❤❤
O melhor vídeo já feito aqui no RUclips parabéns meu amigo 👏✌️🔥🚀
Irmão e disso que eu falo recuperar um motor abandonado , travado e todo enferrujado , você operou um verdadeiro milagre , gostei , parabéns , estou impressionado com seu trabalho , que não foi facil , agora e pintar que fica mais top ainda , parabéns , show , excelente trabalho
partiu a correia 2 minutos depois de pegar mas esta top só falta pintar....
Parece bomba injetora bosch
Ty for uplifting me brother with your great example of dedication, work ethic and great camera skills! You inspire people like me and others around the world. Bless you much love and success brother!
This does not get old, massive respect 👍👏👏👏👏,
Tôi thực sự thích video của bạn, chúng rất tốt, bạn có thể khôi phục bất kỳ động cơ nào. Gosto muito dos seus vídeos são muito bons, você consegue recuperar qualquer motor.
This Guy's Head is beyond repair. Using which anything can be restored. Hats off to you.... maniac..
Bạn rất tài năng và tuyệt vời. Chỉ có một điều tôi mong bạn hãy đeo kính bảo vệ mắt khi làm việc vì đôi mắt của bạn rất quý báu với chúng tôi
Boa noite. Sou brasileiro e acompanho seu maravilhoso trabalho no canal. Você é um gênio. Um grande abraço bem brasileiro❤❤🎉😊
Quá tốn kém thời gian , thiết bị mới có thể phục hồi đc những phụ tùng rỉ nát như vậy, kiến thức và tài năng thực sự
Astounding, super impressive in this disposable age. This is the guy that will keep everything working in the apocalypse
kỳ công thât, không yêu nghề không làm nổi. khá khen cho ông thợ máy quá chuyên nghiệp.
Это жесть. Мотор поднят для одного запуска, больше всего мне было интересно про ремень грм, сальники и прокладки, думал, купит ли он хоть одну новую деталь)) но нет, всё нормально 😅
Однозначный лайк за проделанную (но к сожалению бессмысленную работу)! Думаю монетизация от ютуба всё оправдывает, но просто жалко труд, т.к. это творение просто в чермет пойдёт в итоге
Поршни другие.
Поддон тоже, тот сгнил полностью
Так он от монетизации и кормится. Пошёл купил такойже бу и вуаля.
Особенно тнвд. Плунжера так не будут работать там Пренцезионные поверхности.
распредвал стоит на этот двигатель 83к
Great work restoring that old engine. 👏🏽
Meus parabéns, você ganhou um fã aqui do Brasil, estou ansioso por mais vídeos seus!
Thank you for your interest and comment
Amazing and well done. Lets have part two, oil pan, pump, and put in a vehicle.
As a german mechanic, i can say chapeau buddy - u did very well
awesome! but, you should of just replaced the timing belt, sprockets, and idlers with new ones. i'm sure there are aftermarket parts for that engine.
The tongue is speechless when I saw it for the first time. I said it is impossible to restart that engine because of the rusty state it was in because of sea water. But with will and love for work, experience, mastery and skill, the engine is back to work again. You deserve a million likes.🎉🎉🎉🎉🎉🎉🎉
khó thế cũng làm được , bạn thật sự kiên trì
Phải tôi thì bán vechai rồi 😂😂😂
У меня нет слов)) люди новые моторы не могут нормально собрать) золотые руки у тебя!
Iv watched hundred's of restoration videos, and this my friends far exceeds anything else, a true mechanical genius, thankyou brother, you have shown me a mechanical miracle!! ✌️
thanks to this video, I believe now that nearly any thing can be restored, even looking like a absolutely hopeless ❤ thanks for inspiration
Lên youtube mới thấy, người nước ngoài khen ngợi tôn trọng a bao nhiêu. Fb với Tik Tok rác của VN sỉ vạ nhục mạ a bấy nhiêu. Một số thành phần thật lạ, cùng là đồng hương với nhau mà cứ thích hạ bệ nhau chê bai đủ điều mặc dù không biết họ đã làm được 1 góc của a hay chưa.... Thôi thì chúc a chân cứng đá mềm cứ theo đuổi đam mê youtube và ra nhiều video clip chất lượng tiếp theo a nhé. Cảm ơn a
Это уже из области магии- оживить двигатель в ТАКОМ состоянии!Супер!)
совершенно волшебно, но при этом абсолютно бессмысленно. ибо жизни такому мотору до первой нагрузки
@@6o6ep_B_Tpycax думаю с их климатом все таки режим более щадящий нежели с работой в перепадах на зимний период
Можно было этого не делать, а супротека плеснуть
@@6o6ep_B_Tpycax хорошо если он хотя бы минуту проработал
Судя по всему движок разъело солёной водой, такой труд ложить ради минуты славы сомнительное удовольствие
Quá đẳng cấp. Ko còn lời gì để mô tả! Quan trọng từng chi tiết tháo ra mà vẫn nhớ đc! Máy tính sống!
Un grand bravo monsieur, vous êtes très fort et c'est un plaisir de vous regarder et employer des techniques pour arriver à vos fin.
Je vous admire.
🎉🎉🎉Parabéns pelo trabalho. Felicidades
That's nuts! I'm surprised it ran at all! Hopefully after you build a little stand for it, hookup some cooling water and give it another go, it will bed the rings and valves in and run smoothly.
Estoy sumamente sorprendido por tu trabajo. Saludos desde Argentina 🇦🇷 para ti y toda la buena suerte del mundo!! 😊
I’m more impressed how you’ve remembered to put it all back together. Only issue with a wire wheel is it pits everything.
Great job bro 👍🏿👍🏿👍🏿👍🏿
This guy loves machines and exploring ways to rehab the seemingly impossible! Fabricating his owner head gasket alone is impressive!
I wonder how the engine is to be later put to use.
It looks like the head gasket was fabricated by another person. You can tell by the more “seasoned” hands, that this is a more experienced professional. Still the whole restoration process was very impressive, it was awesome to watch!
I proud of u my brother 🎉🎉🎉u r brilliant ❤❤❤❤😊
Sou do Brasil, tô adorando essa saga , você é muito bom 🇧🇷❤
This is amazing big up man this is a restoration
This guy is a true master at what he does. 👏🙏