💡The Boy Genius Restores The Giant KOMATSU Wheel Loader // Complete Restoration Of KOMATSU Excavator
HTML-код
- Опубликовано: 29 апр 2024
- The genius mechanical boy repaired and restored the entire giant Komasu wheel loader in 186 days without stopping.
The story is about a skilled mechanic who demonstrated his extraordinary abilities by repairing and restoring a giant excavator without taking a single day off for 186 consecutive days. The task was daunting, but the genius mechanic persevered, working tirelessly to ensure every part of the machine worked perfectly. With careful attention to detail and a deep understanding of the machine, the mechanic was able to overcome all obstacles and restore the komatsu wheel loader to its former glory. His dedication, skill and hard work are truly remarkable and he sets an incredible example of what can be achieved with perseverance and expertise. success makes everyone The world is amazed by the genius mechanic
► Contact Me: wtgroupvn@gmail.com
Thanks for watching, LIKE, Subscribe & Share!
► Subscribe to channel: bit.ly/3mG3rQi
►Restorations Tools: bit.ly/3J5CVHS
© Copyright by Restorations Tools
I hope you find something useful and enjoy this movie! I am pleased with your feedback, advice and suggestions for improvement.
Good morning Kurtis, you are the all-rounder in engineering, you do any job perfectly and with great quality. You should have an award for perfection and the great work you do with everything you set out to do. I love watching your videos every day and I look forward to seeing you. Can't wait to see the next memories to Caren that u also make. great job of filming and video editing and also to your dog 🦴🐾 🤗👏👏👏
Предпродажная подготовка...🤣
покрашенный металлолом.. "гениальность " зашкаливает
Досмотрел до момента где он ковш "чинит" и выключил,очередная "рестовраторская" шляпа
My dad was born in 1918. He grew up learning to use what you had. Was a very good mechanic. Junk yard for parts. Cleaning plugs until just wouldn't work. Making own plug wires. Always a tool kit in car. Making do. Wasn't a bad life.
Bravo pour la POLLUTION les gros caves
Amazing job guys. Enjoy watching y'all work together. A good team. I use to change tires of all kinds in the shop n road service by myself. Turned wrenches too. Grew up farming. I know how hard it is. So again. Great job. Be safe.
Un sacrificio pero vale la pena un saludo y un fuerte abrazo amigo quedo muy lindo saludos de Quito Ecuador
Hello everyone have a great day
A really great job, but couldn't you afford to replace at least the one bald tire the tires were your one real let down on a really great rebuild.
That was awesome guys
Amazing work , congratulations
excellent job very nicely done well done guys you are awesome thanks for video
Nice job Nice Loader good show 😃👏👏👏👏👍👍👍👍👍😍
Thanks
nice,
hello from Russia. 👍👍👍
Super 👍
Great job guys! Congratulations from Greece.
Awesome job
Transmission valves will be plugged up in 10 minutes . You haven’t done anything to repair it. That’s ok the engine won’t last a week . The paint will probably fall off for shame.
I like the colors. lots of good work
Amazing he brought this yellow monster to life ❤️🔥🤯
São vietnamita esse pessoal profissional sou seguidor deste canal parabéns pelo trabalho de vocês
👍👍👍👍👍👍👍👍
Your obviously working on a tight budget. Because of that you did a good job.
Wonderful . Great work. Loved watching you men!!
Very nice work❤
You know, you might as well drag that down of the Creek and wash it there. So that's just gonna end up there anyway.❤
Genios totales 👍👏👏 saludos
Good job
Does he replace any bearings or seals?
1 suggestion...invest in a sandblaster...please!!
Enjoyed this video, nice work guys😊
Did a good job rebuilding the engine but screwed up on lapping the valves. Once a valve is lapped to the hole, that is the only hole that it seals properly in. If he does a compression test, he is going to have random pressures across the cylinders because the valves are mismatched now. Since he lapped all the valves then took them out and didn't keep them in order, he just threw them into a pile with no order. Also were the new cylinder sleeves honed for the cross-hatch. The sleeves that I have seen aren't honed when brand new.
I thought so too although he then puts them back in specific spots, must have them marked. Running it right after rebuild for a decent amount of time with no coolant didnt feel right
@@awake.collective what i saw was him just plunk the valves in. He did stop and glance at the rest of them because the intake and exhaust are different sizes. Running the engine as long as he did without cooling, I don't think would hurt it because he probably filled the block with water. If you noticed the water and hose there. When he was cranking the engine white smoke came out of the turbocharger from both sides. That shows that the valves weren't in order causing blowby and low compression
Parabéns amigo admiro sua inteligência vc é realmente um oriental
All those worn pins should have been replaced or machined. Most of this is clean and paint.
👍👍👍👍👍👍👍👍😄😄😄😄
Those pins don’t wear out dude
He works very hard.
Sehr gute Mechaniker hervorragende Restauration
👍👍👍👍👍👍
Gray smoke from a diesel engine means badly burned diesel.
👍👍👍👍👍👍👍👍👍👍
Just have to learn how to drive it now 🙃
If they don't get it to dealership s like this they're making a big mistake, they will be able to make up for the next year a win win in the USA!!!!!😊
Pretty awesome to save that ole piece of iron. I don't understand the color scheme, but overall pretty sweet revival.
Молодцы! Проведена хорошая работа. Можно ставить в музее дорожной техники на постамент. Он своё отработал.
Two worn tyres, an engine that smokes, at least 5 worn pivot pins between the lifting arm and shovel, not to mention at least seven missing wheel bolts , does not make a complete restoration.
The 2 worn tires should've been both up front & the tires with the good tread on the back,but they put them on like it came in, but they put the back tires up front & the front tires on the back
Bon travail
Things must be pretty cheap in the Philippines 🇵🇭 if you can strip down a bulldozer and restore it. Also, I would reinforce the cabin just in case it ever tips over on its roof 👍🏻
Very good work guys
Well-done from New
Zealand.
You guys from northern hemisphere
calm the uck down.
Nice look at the mechanics
От бога 😂😂😂😂😂😂
❤❤❤❤❤❤❤❤❤❤
A minute in, a guy is standing in the most dangerous place on the truck, at the mercy of the crane operator.
And can you believe he's not wearing flip flops?
Amazing video ❤
It s Not a Komatsu it s old Ihc. 510/515
Hope you can afford a nice sandblaster some day😊
una restauracion practicamente hecha a mano felicidades
👍👍👍👍👍👍❤❤
При ограниченном бюджете и при бедности в стране эти ребята делают хорошее дело , и приносят какую то пользу .
Now we know how the ground water gets contaminated with chemicals.
garderner!
One tyre condition not good sso why you didn't change old tyre only time pass video and your work also
As rodas de amarelo combina mais e fica mais bonita.
Главное всё хорошо покрасить и в металлолом сделать
D best master mechanics of all time 🎉🎉🎉
👍👍👍👍👍👍
Olá! Cheguei agora neste canal. Sou José Djamar - Brasil, estado de São Paulo, cidade São Paulo.
Qual o seu país, estado/província e cidade?
👍👍👍👍👍👍👍👍
Парни походу перекупы,продажный вариант ))))
تمام
Сделано для перепродажи
ESTA ATERMINADO QUE DESIA LLO COM DIOS BALOR CORTESIAS
👍👍👍👍👍👍👍👍
The drive does not work on this unit, you can literally see the fork lift pushing and pulling it. 😂😂😂
so great ❤❤❤❤❤❤❤❤❤❤❤❤👍👍👍👍👍👍
Remind me not to eat the fish out of the local stream!😂😂
mantap
Is it allowed to let all the fluids from the engine run free in to the ground outside. Here we need to drain the fluids in barrels.
Love how they just painted over the dirt and grease. That will really work. And the clutch packs! Just a wire wheel clean,😂. You can tell that they don't care if it's going to last. A lot of work for nothing!!!!
I hope I'm not being too critical in saying that this was a terrible waste of good paint and a new gasket set! That thing is a death trap! Kudos on all that labor tho! wow.
Дизель , гидронасос , втулки и пальцы, шины - всё в очень плачевном состоянии.
Этому погрузчику не дитйлинг был нужен - а реальный капитальный ремонт ☝️🥸
Там походу что то с трансмиссией, ибо в конце видео карой толкают его.
Yes good job...
👍👍👍👍👍👍👍👍
Beaucoup d éffort pour un très grand restauration.tres bien .bon courage.
Given the tools and work space they did a pretty good job. Tools are out dated and they work in flip flops. jeez Louise I can't believe they do what they do with what they have. Komatsu ain't running so good. Needs some tuning
Joli travail .bravo
Now let's see if it works.
Он бы и без ремонта работал бы так же))
No grease on the gears or any Joint !!!!!! 1:19:54
That’s so bloody amazing work mate good job amazing work keep it up good luck with your new project
These kind of lads are what you find up bush and will fix most things with a half dead battery and a piece of wet rope. Have personal experience of riding through N/E Thailand when my Harley threw a piston. The girlfriend soon found a guy all sorted in 24 hrs dirt cheap and so helpful.
O mais importante não fizeram que é as buchas e os pinos 😐😐😐
You got the engine running and restored the body…..but why was the forklift pushing and pulling you 😂😂😂😂
Transmission issues I suspect. Had to fast forward to the end to see.
Ur good u r there u help a lot of people to fix anything. Ur country needs u there to help people do their job easier. Keep up d good work ❤🎉😊
👍👍👍👍👍👍👍👍👍👍
יפה חברים...אלופים..👍🤝🇮🇱🇮🇱🇮🇱💪💪💪💗💗🌹🌹..בהצלחה רבה..
Only thing restored was the ICDE. The rest of the project was essentially lipstick on a pig.
Даже бронзовые втулки и пальцы не поменяли всё болтается, это даже не реставрация а пародия какая то.
Сальник за маховиком ещё послужит...🤣
Всем пох@й на ремонт, главное просмотры на ютубе
Seeing the engine smoking and missfiring I would say low compression because the sleeves weren't cross-hatched and him mixing up the valves screwed up the work he did. Another thing he should have done is put locktite on the flywheel bolts.
Шпильки сломанные не высверлили, где колёса прикручиваются.
По поводу описания к видео, мой покойный дедушка говорил "хвастать, милая, не стану, знаю сам, что говорю. С неба звёздочку достану и на память подарю". Будьте поскромнее.
По ржавчине красить это высший класс, да.
Nice good job boy
Totally unexpected, science never ceases to amaze me.
I can't believe these people are wearing shoes. Sup wit dat?
Good work!! Valves should go on the same seat you polished
muy amigo de el acetileno el chico
Как в двигателе можно поменять одну гильзу, и надеятся что он будет работать, и колотить по подшипника 🤦🤦🤦🤦🤦🤦
глуши перегреешь
En República Dominicana le llamamos Chapuceria, Si quieren seguidores tienen que mejorar el contenido, Eso no es una restauración eso es una chapuceria
Вот откуда у жопорука футболка gazpromneft!?! Вот это действительно интересно..)))
I’m only upset by the paint job. Looks like it’s from McDonald’s
Why you so upset bro?
Does it clash with your uniform…..!!!!!
What an absolutely stupid thing to say after all the effort that this guy has put into it….
@@paulmoxon8839 hahahahahaha I’m still laughing. It looks ridiculous bro
This equipment is for own use only not for construction works already to them this kind of item is thrown to junk for melting this is our style in the developing countries like the philippines.