@@BoostandBadHabits if I were to do this in my 96 grand marquis would I have to get the 5 spd from a 96 mustang 4.6l.and would it swap over easily or would I have to redo the rear gearing.
What year is this vic? I have an 03 and am finding so little content and wondering if I bought the bastard year vic or something. I will buy parts that "should fit" and they are either from the previous gen or for 04 and up only -.- I have always had weird luck with buying cars.
I’m planning my 2008 crown Vic can I use a 04 transmission or has to be the same year also for the harness wouldn’t you have to replace the whole engine harness so the Manual transmission works properly? Or you guys just wired it yourself or added an adapter for it?
Appreciate it, no we never touched its location. The pcm is already in the engine bay factory. I'm not familiar with marauders though honestly. I did look up pics and they do seem to be different..
Question! Flywheel bolts?! Something that's never talked about in any 5spd swap videos. Manuals have a longer bolt as the flywheel is thicker than the original CVPI flex plate. And that's where I'm hung up on my project. Did you all just use the original shorter bolts that come with that automatic? Or did you all hunt down the Mustang manual flywheel bolts? I almost wanted to try and use my original ones, but I just can't get comfortable with them as there's only 5-6 threads to work with.
It would work on yours aswell but youd have to buy the 92-04 pedal assembly from adtr. Really the only difference is ours is drive by wire throttle body so it needed a different pedal assembly.
The pedal swap is 500 right out the gate, obviously can be done alot cheaper if you can fab/weld and make your own. Clutch kit will be 200-400 on the cheap end depending what you go with. Also dont forget a pilot bearing for the crank. Trans you can probably find close to 500 typically any less and they have synchro issues. You can use your stock driveshaft but have to change a ujoint and use a mustang yolk. And you'll probably need a tune aswell. It could be around 1500-2000. Maybe more if you pay soneone else for wiring and modding the trans cross member also fluids. Its really a pretty easy swap though and can be done easily in a weekend taking your time.. If you decide to swap it and have any questions along the way just shoot us a message.
Hey what's the top speed on ur car it doesn't viberate passin 100 ..cuz I have a Lincoln Town car 5 speed and my transmission tale shaft keeps cracking
Авто/Мото
BOYS !
I LOVE WHAT YOU'RE DOING HERE !
NOTHING LIKE SHIFTING YOUR OWN GEARS...RIGHT !!!
Nice work I’ll be doing my Vic soon
One of the best changes that can be made. Turns the panther into a killer.
The old stink bug in the angle grinder trick
What trans is that? Just a five speed out if the sane year mustang? In tryna do a very similar build
This is awesome.
You guys are awesome.
Y’all are my favorite mechanic channel
Stink bugs in the grinder! Hahaha thats a first
Lmao that stink bug part was funny as fuck 🤣🤣🤣
Thank god for harbor freight 👍🇺🇸
A ford pickin up a chevy lmfao
New subscriber here this channel is awesome good job fellas
15:20 You need to install a driveshaft spacer so the yoke doesn't come out of the trans
Man I love this build, I would like to boost mines and even manual swap it
What kind of wheels and tires do y'all got on that vic ? I got an 01 the same color....
That's what I was JUST about to ask...
From boring column shifter to slamming gears
Yeehaw 😎
I wish I lived closer to you guys. I’d love you guys to swap my 05 to manual
Hell yeah!! Good job. Mild cams would be sweet to see
We have a built motor sitting on a stand with some decent sized cams for it when the times come.
@@BoostandBadHabits if I were to do this in my 96 grand marquis would I have to get the 5 spd from a 96 mustang 4.6l.and would it swap over easily or would I have to redo the rear gearing.
just finished my 3rd swap! good shit, this makes these cars so much better
What year is this vic? I have an 03 and am finding so little content and wondering if I bought the bastard year vic or something. I will buy parts that "should fit" and they are either from the previous gen or for 04 and up only -.- I have always had weird luck with buying cars.
More videos of the vic please love the content and stright pipe that thing no cats
Only has mufflers. Cats are gutted
I’m planning my 2008 crown Vic can I use a 04 transmission or has to be the same year also for the harness wouldn’t you have to replace the whole engine harness so the Manual transmission works properly? Or you guys just wired it yourself or added an adapter for it?
How much something like this will cost?
Why you make it manual gear what the benefit it razing car
make a hydro e brake install on this, there is no video for that and I want to do it to mine.
Did you have to move the PCM to engine bay for clutch pedal to clear? I'm currently 5sp swapping a 2004 Marauder, your videos have been helpful.
Appreciate it, no we never touched its location. The pcm is already in the engine bay factory. I'm not familiar with marauders though honestly. I did look up pics and they do seem to be different..
What’s the wheel/tire specs on this car? Wanna get some wheels for my vic lol
I’m interested too!
This is great
How did y’all move the shift cable from its original point to under the console? Was it difficult?
Can we make crown vct 8 or 10 speed gear to make it economy car and what car we can take gear from it
What size tire and rims on that vicand do you have wheel spacers on it.
That’s only thing I didn’t do 5 speed
Love this! You guys gonna shorten the driveshaft? I think the stock shaft is a bit too long and the yoke might hit the tail shaft.
Thanks! The driveshaft actually fit perfectly. No issues so far.
@@BoostandBadHabits Just got myself an 07' Crown Vic and now ya'll got me thinking about a manual swap!
Where did y'all get the flares for Vicky?
My only question is what wiring issues did you run into if any?
I know it’s a been a while! But I got a tranny ready to go and my auto is getting soggy. What clutch kit are you running?
Did you guys buy the full swap kit adtr or just pedal assembly?
Hey I have a question for you you think a 2008 mustang GT sctx4 tuner works on a 2004 crown Victoria
Not 100% sure, but as long as the sct handheld is unmarried from the mustang it should be usable on another vehicle.
What kind or tuner you run in your crown Victoria
@@jonnyvargas9394 currently running HPtuners, but i believe its only available for 05+ models.
Oh I get it now alright man thank you so much 👍
Can I put one of these engines on a 2000 Ford GT ?
Question! Flywheel bolts?! Something that's never talked about in any 5spd swap videos. Manuals have a longer bolt as the flywheel is thicker than the original CVPI flex plate. And that's where I'm hung up on my project. Did you all just use the original shorter bolts that come with that automatic? Or did you all hunt down the Mustang manual flywheel bolts? I almost wanted to try and use my original ones, but I just can't get comfortable with them as there's only 5-6 threads to work with.
We used ARP flywheel bolts from a mustang.
@@BoostandBadHabits thank you sir.
Hey I know it’s been awhile but can you tell me the trans you got and the petals
04 mustang gt trans (tr3650) and adtr pedals
What all parts did you need besides the pedals?
What yoke did u use to fit the crown Vic onto that t5 ?
What trans would I need for 2005 crown vic
Anybody have a transmission that works for a 2007 victoria that they are tryna sale p75 I think?
What transmission you use?
Wheres the little oddball clips at the end. Those were always great.
You told me not to post it lol..
@@BoostandBadHabits the other vids don't have em either lol
@@charlesmaley4384 everything is broke. We aint done nothing cool lol.
What is the dimensions of your tires
What size wheels are those
How much for you guys to swap mi vic maybe a blower lol
What year can this swap work for. I have a 1998 with low miles. Would love to change my auto trans to manual.
It would work on yours aswell but youd have to buy the 92-04 pedal assembly from adtr. Really the only difference is ours is drive by wire throttle body so it needed a different pedal assembly.
What year is cv
Your
What car did the 5 speed come out of?
04 Mustang gt
My 07 needs a transmission. About how much money should I expect to spend swapping it to a 5 speed?
The pedal swap is 500 right out the gate, obviously can be done alot cheaper if you can fab/weld and make your own. Clutch kit will be 200-400 on the cheap end depending what you go with. Also dont forget a pilot bearing for the crank. Trans you can probably find close to 500 typically any less and they have synchro issues. You can use your stock driveshaft but have to change a ujoint and use a mustang yolk. And you'll probably need a tune aswell. It could be around 1500-2000. Maybe more if you pay soneone else for wiring and modding the trans cross member also fluids. Its really a pretty easy swap though and can be done easily in a weekend taking your time.. If you decide to swap it and have any questions along the way just shoot us a message.
@@BoostandBadHabits Thanks!
@@BoostandBadHabits how can you tell if syncros are bad if you're looking at pulled transmissions
Hey what's the top speed on ur car it doesn't viberate passin 100 ..cuz I have a Lincoln Town car 5 speed and my transmission tale shaft keeps cracking
Its seen around 130 few times. Never had the need to grab 5th and keep going. No issues so far.
Did you use the original transmission mount from the crown Victoria
@@jonnyvargas9394 it had to be modified to fit but yes.
Whats the model of the trans?
Tr3650
@@BoostandBadHabits awesome thanks
F ing stink bugs
Drifting? No
Well if this anti the blind leading the dumb...
Im sorry you didn't like the video.
Dude swap my car