So you don’t need fuse or anything like that just wire it just like you did ? I just have fuel pump , push starter, and ignition switch everything else will stay oem -
Yes that's correct, I have had others do the same, one example is on a circuit Integra. To my knowledge, all we are doing is changing the switch style, the fuses and such stay the same if kept like oem
I should mention, depending on the setup and person. If you are just wanting a Push to Start, a company called "JDI" - Jordan Distributors Inc. offers a Plug and Play Push Start as well as other things I am unsure of other brands but the switch panels seemed to come wired for street use, so you can do 3 switches for different "Key Clicks" EXAMPLE: 1st switch - Accessories 2nd switch - Ignition 1 3rd switch - Ignition 2 So if you wanted to listen to the radio, you didn't have power to everything else too. If I can recall, I showed that I rewired my panel so I have a "Main Power Switch" to kill everything else is and when needed.
G.m slayer .gunner fam top off the morning brotha.no cap I'ma watch this vif all day all week it's a essential.i need to do this to my hatch.thank for such amazing vid.🙏🔫mad love brotha.was a pleasure to meet you at pr. BBQ giveaway one love brotha 🔫
Yes you can if you want a toggle switch to control your LED Light Strip The light strip should be 2 wires 1~ Power 1~ Ground You can wire the Ground wire to the chassis or to the nearest harness 10mm ground just put a wire end or an eyelet on the end of your ground wire. The Toggle Switch will have 3 Terminals if it's similar to my toggle switches 1~Power (Hooked Up to 12V Source) 1~Signal (Hooked to Power Wire of Component you want to power) Ex. Your LED Light Strip 1~Ground (Ground to Chassis or Nearest Harness Ground)
I forgot to mention, also a "Inline fuse" should be added in-between the toggle switch and the 12v power. If the 12v power isn't already controlled/assisted by a fuse.
Whats up, I ran the signal wires under the dash similar to the OEM harness, its still just mocked up until I get everything wired in, then I'll go back and clean it up
Yes it should, The Switches should be the same just a different brand. They should have Power, Signal and Ground and probably need rewired also. (If you want a "Master Main Power" to kill everything in one push) The base wiring setup I believe they come wired as is for street cars. Example, so you can be parked and have your Accessories wired to a switch alone. Listen to music without anything else on. Everything wired to their own switch and not all killed by a "master main power switch" Example, key turns 1st Key Click - Acc (Switch 1) 2nd Key Click - Ignition 1 (Switch 2) 3rd Key Click - Ignition 2 (Switch 3) That is to my knowledge and understanding on how the switch panels get pre-wired and shipped
Great information I think this the only video like this for Hondas I’ve seen so thank you for sharing with the community.
Thankyou for the support 🙏🏽
So you don’t need fuse or anything like that just wire it just like you did ? I just have fuel pump , push starter, and ignition
switch everything else will stay oem -
Yes that's correct, I have had others do the same, one example is on a circuit Integra.
To my knowledge, all we are doing is changing the switch style, the fuses and such stay the same if kept like oem
I should mention, depending on the setup and person.
If you are just wanting a Push to Start, a company called "JDI" - Jordan Distributors Inc. offers a Plug and Play Push Start as well as other things
I am unsure of other brands but the switch panels seemed to come wired for street use, so you can do 3 switches for different "Key Clicks"
EXAMPLE:
1st switch - Accessories
2nd switch - Ignition 1
3rd switch - Ignition 2
So if you wanted to listen to the radio, you didn't have power to everything else too.
If I can recall, I showed that I rewired my panel so I have a "Main Power Switch" to kill everything else is and when needed.
Keep up the great work brother. Much love and respect
G.m slayer .gunner fam top off the morning brotha.no cap I'ma watch this vif all day all week it's a essential.i need to do this to my hatch.thank for such amazing vid.🙏🔫mad love brotha.was a pleasure to meet you at pr. BBQ giveaway one love brotha 🔫
🔫🔫🔫🔫 Glad to help and it was an Honor bro
@@slayerzracing ,🙏🙏🔫👑
Awesome video! Very informative! Thanks brother! 🔫❤️
🔫❤️🌎🙏🏽 Glad you liked it and hope it helps bro!
Hell yea bro! Love seeing more of us do shit!🔫🔫🔫🔫🔫
🔫🔫🔫
G.m brotha Calvin 🔫🔫🙏👑
So much awesome information thanks for sharing with us 🔫
🔫🔫🔫 I try my best
Yerrrr!!!!!!!
Can this same process of wire connect to strip led
Yes you can if you want a toggle switch to control your LED Light Strip
The light strip should be 2 wires
1~ Power
1~ Ground
You can wire the Ground wire to the chassis or to the nearest harness 10mm ground just put a wire end or an eyelet on the end of your ground wire.
The Toggle Switch will have 3 Terminals if it's similar to my toggle switches
1~Power (Hooked Up to 12V Source)
1~Signal (Hooked to Power Wire of Component you want to power)
Ex. Your LED Light Strip
1~Ground (Ground to Chassis or Nearest Harness Ground)
I forgot to mention, also a "Inline fuse" should be added in-between the toggle switch and the 12v power.
If the 12v power isn't already controlled/assisted by a fuse.
Where and How did u run the signal wires??
Whats up, I ran the signal wires under the dash similar to the OEM harness, its still just mocked up until I get everything wired in, then I'll go back and clean it up
Do you a video of the other accessories being wired in ?
I have this ignition video and a video wiring up headlights/running lights. Other than that, no I do not.
Does this works with any switch panel because that one is out of stock?
Yes it should, The Switches should be the same just a different brand.
They should have Power, Signal and Ground and probably need rewired also. (If you want a "Master Main Power" to kill everything in one push)
The base wiring setup I believe they come wired as is for street cars.
Example, so you can be parked and have your Accessories wired to a switch alone. Listen to music without anything else on.
Everything wired to their own switch and not all killed by a "master main power switch"
Example, key turns
1st Key Click - Acc (Switch 1)
2nd Key Click - Ignition 1 (Switch 2)
3rd Key Click - Ignition 2 (Switch 3)
That is to my knowledge and understanding on how the switch panels get pre-wired and shipped
@@slayerzracing great info, I appreciate your time!!! Thanks
what switch panel is this ?
Its a "RaceSpec" Switch Panel
🔫🌎
🔫🔫🔫🔫
🔫🔫🔫
It’s track car so no radio