one way to stop the noise is When installing the suspension it's always good to tighten the bolts to spec after you have the weight of the truck on the ground so your rubber bushings won't twist and bind.
As far as other people flashing their lights at you, did you align your lights after the lift? Most people forget this step, its usually just the turn of a screwdriver to adjust the lights lower.
I have squeaking from my front passenger side. I ended up putting white lithium on top of my strut where it touches the coil bucket. The rubber is very squeaky. Test yours with wd40 and see if youe squeak goes away
great review, big mistake by diy , never super tight bolts while on jack, hand tight , and when on tires use torque wrench and tight them , put anti-seize on all bushes , i did mine on 4runner took me 12 hours , and no issues , one big complain after placing ironman foam cell , my rigid is rough ..😒
Irfan hey how do you like the lift ironman foam? im thinking to get that one for my lexus gx 460, but a little undecided, im between ironman foam cell stage 2 and Dobinsons ims.
@@Maximus01776 if you take my advise , please do not lift , you can go on may off road trail without lifting just keep your speed slow , simple fix . Ironman foam shocks are great , work fine , but i will recommend you to get the Mini load spring , stage 1 or stage 2 does not matter they use same parts . i recommend only one inch lift , Lexus comes with KDSS and you will loose the KDSS performance by lifting and also lift will make your ride rough so one inch lift is great . low load spring are good for smooth ride . mean to say when you lift or use hard springs , KDSS function does not control body role too nicely but on soft spring , yes it does . also 2 or more inch lift on the back and front 3 inch lift you need , break line extension also buy iron man Panhard Bar kit , i think stage 2 kit comes with everything . choice is your but stay away from lift , one inch lift is ok by using any leveling lift kit . i installed on my 2020 4runner , i have another channel and i placed video in there ruclips.net/video/rqhFLFITrns/видео.html&ab_channel=Test
What trail are you on there? Are you in BC Canada or Washington state? I have been debating which BFG KO2 tire size to get ... and now I've decided on the size you have~ I have been back and forth between a 255x75/17 and 285x75/17 ... 32" vs 33.9" ... so yours at 32.8" was a good compromise and I agree with the look the 16" gives~
I put overload rear springs on my truck and it got way smoother. But i actually have a heavier load instead of nothing. Steel bimper and camper shell. Never put heavier springs on unless you are heavier.
Nice job, I will bet your squeaking it’s from not putting the vehicle/suspension on the ground before tighten it all the way up, it needs to have load on it. Loose everything while on the ground and retighten.
![ARGENTINA vs. CHILE [3-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 7](http://i.ytimg.com/vi/De3AWmXzhuA/mqdefault.jpg)
one way to stop the noise is When installing the suspension it's always good to tighten the bolts to spec after you have the weight of the truck on the ground so your rubber bushings won't twist and bind.
That’s exactly what happened too, watched the install and they most definitely didn’t do that lol so there’s your answer to the squeaky
As far as other people flashing their lights at you, did you align your lights after the lift? Most people forget this step, its usually just the turn of a screwdriver to adjust the lights lower.
Between these and bilstein 6112 I can’t choose! Help!!
I'm in the same boat, what did you end up going with
I installed the JBA UCA's and install was a breeze. The bolt was an easy removal. Maybe I got lucky. 😆
I have squeaking from my front passenger side. I ended up putting white lithium on top of my strut where it touches the coil bucket. The rubber is very squeaky. Test yours with wd40 and see if youe squeak goes away
Interesting build any new updates or pros and cons?
great review, big mistake by diy , never super tight bolts while on jack, hand tight , and when on tires use torque wrench and tight them , put anti-seize on all bushes , i did mine on 4runner took me 12 hours , and no issues , one big complain after placing ironman foam cell , my rigid is rough ..😒
Irfan hey how do you like the lift ironman foam? im thinking to get that one for my lexus gx 460, but a little undecided, im between ironman foam cell stage 2 and Dobinsons ims.
@@Maximus01776 if you take my advise , please do not lift , you can go on may off road trail without lifting just keep your speed slow , simple fix .
Ironman foam shocks are great , work fine , but i will recommend you to get the Mini load spring , stage 1 or stage 2 does not matter they use same parts .
i recommend only one inch lift , Lexus comes with KDSS and you will loose the KDSS performance by lifting and also lift will make your ride rough so one inch lift is great .
low load spring are good for smooth ride .
mean to say when you lift or use hard springs , KDSS function does not control body role too nicely but on soft spring , yes it does .
also 2 or more inch lift on the back and front 3 inch lift you need , break line extension also buy iron man Panhard Bar kit , i think stage 2 kit comes with everything .
choice is your but stay away from lift , one inch lift is ok by using any leveling lift kit .
i installed on my 2020 4runner , i have another channel and i placed video in there
ruclips.net/video/rqhFLFITrns/видео.html&ab_channel=Test
How has it been for you guys after having it a while? I just ordered this kit and skid plates. Any input would be great
What trail are you on there? Are you in BC Canada or Washington state? I have been debating which BFG KO2 tire size to get ... and now I've decided on the size you have~ I have been back and forth between a 255x75/17 and 285x75/17 ... 32" vs 33.9" ... so yours at 32.8" was a good compromise and I agree with the look the 16" gives~
Great info! Good job 👏👍👌
what spring you use? i think they have the A B C for different purpose
Would you know where I can buy some anti-squeaky?
I put overload rear springs on my truck and it got way smoother. But i actually have a heavier load instead of nothing. Steel bimper and camper shell. Never put heavier springs on unless you are heavier.
can i buy your ironman UCA's?
Nice job, I will bet your squeaking it’s from not putting the vehicle/suspension on the ground before tighten it all the way up, it needs to have load on it. Loose everything while on the ground and retighten.
Icons are overpriced and problematic. Common leaks.