Little known fact about the bindings on flydigi controllers, if you bind your button to either scroll wheel up or down and change the mouse binding to an action it will act as a 1000 cps auto clicker and it much faster than using the turbo function
I played on my v4pro for some time now and honestly, it might be my fave controller of all time. I used to have one controller for new games, and one for retro, because the left analog never was good and precise enough, but now it`s whole different story.
Finally. A US review. Why would you play the left stick at max? It's usually the moving stick so you want it lose. You want the right stick tight for aiming.
I set the start zone curve on the left stick of my Vader 3 at like 15% so you can actually walk in Elden ring instead of immediately jogging. Before, a quarter of your stick range wouldn’t do anything and then boom, you’re jogging. I just have it set that way for Elden Ring. Oddly they didn’t completely butcher the right stick like this in the game though, just the left. Loose may feel better if you try this.
Wish I saw this video before I got my Vader 3 Pro, seems like Vader 4 Pro is what I wanted out of a controller for not much of a hike in pricing. Tried to use a program to overclock my V3Pro to 1000 polling but it's stuck at 500, also doesn't seem to have that Circularity Algorithm option. Can't understate how much I appreciated this video, watched it with a mate, he purchased the Vader 4 Pro right after.
I was a bit worried my left analogue tension ring was broken, as it had a lot more play than the one on the right analogue stick. However, judging from your video, that seems like completely normal behaviour. As long as the adjustment ring doesn't start moving by itself and fucking up the stick tension, it should be fine.
Nice review. Got mine and a grip on order super excited. Gonna take out the rumbles and set the tension close to the PS4's. Software options seems a little overwhelming but otherwise looks solid.
Hello, thanks for the video, i have a question for you. When you do adjustments on this section in 8:23 and close the software are they stay where they are you adjusted or show blank unsetted state when you reopen it?. I ask because i buy this gamepad from Aliexpress and i install the software, i have issues with software not update the firmware of the gamepad and stay at 0% but other than that i adjust 10bit, 1000hz etc and i close the software then when i re open software they shows blank. I reach custommer support but i start to annoy because person who reply my emails always say try this try that etc and i suspect not say software engineers about my situation in last one week. I just need to confirm that not my problem only like updating firmware also problem to others in Reddit. Sorry for my poor English.
glad to finally see a review for this. weird question, can you plug this in as a dinput controller so you can map the extra buttons independtly in games?
Can raw circular mode be tailored to about 10.9% over the line like standard pad stick 🕹️ response curves. Otherwise you may have to alter all your settings on a pad type basis 🫣🤦🏼♂️. RAWS great for range but in some games it may fast scroll 📜 menu skip unwanted. And capped to circle ⭕ 0% is too aggressive & sometimes diamond draws in the diagonal circularity readings seen on Gamepadla at 80% restricted tilt tests.
Great review, thanks! Very tempted to upgrade after watching this. Random question, what size KontrolFreeks do you use and did you have to adjust the sticks to get them to fit?
Hello, nice reviews, any idea if that controller brand handle DS4W fine? Most nobably for gyro functions? I don't want to use their dedicated app unless the settings save into the controller without a need to leave the app running
Is there any way to get better circularity on the apex 4 or vader 3 pro? I got both and flydigi space station doesn't give me the circularity algorithm option.
19:43 I think I have the same issue, but I want to confirm. With the trigger stops engaged, did the mouse click have some pre travel and then the click? So it wasn't smooth like a regular mouse click?
Does anyone have weak vibration in nintendo switch mode (d input) like my v4p? I even max the vibration but it can't vibrate strong compare to the pc mode (x input)
Vader 4 pro is better all round clearly they wanna push there own patten out with Vader line! Especially when apex 4 doesn’t have the software upgrades.
yea so when i ordered it the gadget hyper guy said that i ordered it within 5 mins of him putting it up on the website and that i was the first person in the US to get it lol. So he said he would add a special gift.
@@Fdottty when in the flydigi app, select the m1, m2, m3 , m4 button you want to disable, then press one of the paddles to assign it. Assigning it in the way will make it say "null" . That means its disabled
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Little known fact about the bindings on flydigi controllers, if you bind your button to either scroll wheel up or down and change the mouse binding to an action it will act as a 1000 cps auto clicker and it much faster than using the turbo function
I played on my v4pro for some time now and honestly, it might be my fave controller of all time. I used to have one controller for new games, and one for retro, because the left analog never was good and precise enough, but now it`s whole different story.
i like the way u test it in a pretty picky way which is very gd and honest
thanks
This is classic RUclips. And i freaking love it. Nice vid bro.
classic youtube was the best
Can’t wait till mine arrives. Great review!
8:28 Love that you're confirming, and the resolution in decimal is just 2^(bit depth)
Having a higher KF on your left stick is blowing my mind rn
Word son
Finally. A US review.
Why would you play the left stick at max? It's usually the moving stick so you want it lose. You want the right stick tight for aiming.
I play trackmania and elden ring mainly, but I just really prefer the high tension sensitivity on the left stick as well as the right
Ah gotcha. Makes sense.
I set the start zone curve on the left stick of my Vader 3 at like 15% so you can actually walk in Elden ring instead of immediately jogging. Before, a quarter of your stick range wouldn’t do anything and then boom, you’re jogging. I just have it set that way for Elden Ring. Oddly they didn’t completely butcher the right stick like this in the game though, just the left. Loose may feel better if you try this.
@@UmbraNotican you pop the directional button on the vader 3 pro? Or u just damaged urs
I know the thumb sticks are removable
@@willy7968 pop em off, do like i did, pull it from the up direction.
Wish I saw this video before I got my Vader 3 Pro, seems like Vader 4 Pro is what I wanted out of a controller for not much of a hike in pricing.
Tried to use a program to overclock my V3Pro to 1000 polling but it's stuck at 500, also doesn't seem to have that Circularity Algorithm option.
Can't understate how much I appreciated this video, watched it with a mate, he purchased the Vader 4 Pro right after.
haha that sounds fun, glad you got a kick outa it
thats so strange i was watching with a mate as well, just got this controller on order cant wait
The V3P is still a really great controller as a spare man. Don't feel bad, I have both as well.
Then just sell your Vader 3 Pro
I was a bit worried my left analogue tension ring was broken, as it had a lot more play than the one on the right analogue stick.
However, judging from your video, that seems like completely normal behaviour.
As long as the adjustment ring doesn't start moving by itself and fucking up the stick tension, it should be fine.
Nice review. Got mine and a grip on order super excited. Gonna take out the rumbles and set the tension close to the PS4's.
Software options seems a little overwhelming but otherwise looks solid.
the only good review of what ppl care about
the adjustment rings and sticks being removable
nice
Hello, thanks for the video, i have a question for you. When you do adjustments on this section in 8:23 and close the software are they stay where they are you adjusted or show blank unsetted state when you reopen it?. I ask because i buy this gamepad from Aliexpress and i install the software, i have issues with software not update the firmware of the gamepad and stay at 0% but other than that i adjust 10bit, 1000hz etc and i close the software then when i re open software they shows blank. I reach custommer support but i start to annoy because person who reply my emails always say try this try that etc and i suspect not say software engineers about my situation in last one week. I just need to confirm that not my problem only like updating firmware also problem to others in Reddit. Sorry for my poor English.
Quality review, lot of info there, tank you very much sir
Thanks bro 👍
glad to finally see a review for this. weird question, can you plug this in as a dinput controller so you can map the extra buttons independtly in games?
Great review
What about Fn button, Do you have instructions, what does this button do?
Can raw circular mode be tailored to about 10.9% over the line like standard pad stick 🕹️ response curves.
Otherwise you may have to alter all your settings on a pad type basis 🫣🤦🏼♂️.
RAWS great for range but in some games it may fast scroll 📜 menu skip unwanted.
And capped to circle ⭕ 0% is too aggressive & sometimes diamond draws in the diagonal circularity readings seen on Gamepadla at 80% restricted tilt tests.
are you ai?
@@UmbraNoti No 👎🏼 I'm human 🕺🏼.
@@UmbraNotisounds like he got ai to write that shit
Great review, thanks! Very tempted to upgrade after watching this.
Random question, what size KontrolFreeks do you use and did you have to adjust the sticks to get them to fit?
I use the ps4/ps5 size. And yes I had to trim off the edges of the thumbstick grip to get them to fit.
@@UmbraNoti the older 3 prong ps4/5 ones will fit naturally. but they moved to a 4 prong and it wont fit without modification
@@UmbraNoti thanks, yeah I've got both Xbox and ps4 ones and had to trim the rubber on the sticks, was going you found one that fit!
@@hardtobearit interesting, I've got some older PS4 MW2 3 prong ones and they didn't fit, seems like a lottery!
I didn't know you could get so much depth out of a controller
I go hard on controllers lmao
Thanks for the review!
Are the settings saved directly onto the controller or do I need windows app active at all times? Thanks in advance!
Saved to the controller memory I believe
@@ZaytehsThanks!
Hello, nice reviews, any idea if that controller brand handle DS4W fine? Most nobably for gyro functions?
I don't want to use their dedicated app unless the settings save into the controller without a need to leave the app running
you dont need the app running afaik, atleast for the settings i've changed, i've never used gyro tho.
Are the joyricks just as smooth or smoother than the apex 4? And do you know if it still uses bearings?
smoother
Is there any way to get better circularity on the apex 4 or vader 3 pro? I got both and flydigi space station doesn't give me the circularity algorithm option.
not within the flydigi app, the new circularity software only seems to be for the vader 4pro
Dude, WHERE CAN I GET THIS I can't find it on amazon 😭
gadgethyper.com
Can you make a video to disable paddles
19:43 I think I have the same issue, but I want to confirm. With the trigger stops engaged, did the mouse click have some pre travel and then the click? So it wasn't smooth like a regular mouse click?
it has about 2mm of angular pretravel
Great video. If you were to buy only one, would you choose the Apex 4 or the Vader 4 Pro?
I would also like an opinion on this. I see the apex 4 on sale for €95 and the Vader pro 4 for €75. So little in it not sure which to pick
vader 4 pro. i love the trigger stops and the joystick more. also the stick resolution is better and the L3 R3 clicks are better than apex 4
@@UmbraNoti that's interesting, thanks for the info. I got the Apex 4 for an excellent price so it was a better deal for me than the Vader 4 pro.
@@euuIgor Did you got the standard one or the Assassin's Creed edition?
@@feintexp-2530 I got the standard one
How do i change the thumb sticks, scared of yanking it and it breaking
pull it straight off, i know this is a late replay but just use equal force and pull straight away from the center
Does anyone have weak vibration in nintendo switch mode (d input) like my v4p? I even max the vibration but it can't vibrate strong compare to the pc mode (x input)
Is this your favorite controller rn? I’m debating on getting this or the apex 4 or both. What would be your recommendation? Thank you in advance.
this is my fav right now, i have apex 4, this is better imo, the trigger stops and updated polling rate/input delay make it better.
Vader 4 pro is better all round clearly they wanna push there own patten out with Vader line! Especially when apex 4 doesn’t have the software upgrades.
Is the back rubber or just a textured plastic, how’s it feel ?
textured plastic, more aggressive knurling than v3p
How do you remove the sticks?
pull em straight off, away from the controller
How's the L3 and R3 feel? My Apex 4 L3 broke. I read that's a manufacturing issue.
afaik they replace it. just contact them
@@BlackOutIRLno they bloody dont
I got the Vader 3 pro and Apex 4. Is this worth getting?
it was for me
Where did you get your dpad???
gadgethyper.com
can it run the forza horizon game and use the impulse trigger (vibration trigger) like vader 3 pro?
Where can I get this controller in uk
i got mine from gadgethyper.com you can see if they ship there.
AliExpress is the only place I found mine
Gamepadia says there's a big outer stick deadzone?
what do you mean?
Not sure what issue is that, as I've not seen anyone else mention it.
are the C and Z button switches as well now or the same as the V3P?
theyre the same
BRAVO!
Which Kontrol Freeks are you using? The Xbox Version?
He using ps5 galaxy KontrolFreeks
what's the max macro you can set with this? thank you!
is the c & z button mechanic now?
@@乾淨核能 no , same as v3p
@@UmbraNoti thank you
I have a question what konctrolfreek u using for the Vader 3 pro is it ps4 or Xbox or ps5
ps5 galaxy style
Can disable paddles
And u have to mod it because Reddit say u have to mod it a little
Can I use 2 macros at the same time. One is slower and one is faster
i'm not sure sorry.
It’s okay
Hows the build quality compared to the vader 3 pro?
its about the same
interesting, the stick is the same as in apex 4?
no, its a new design
Is it lighter than the apex 4?
yes
Does the headphone jack still work at 1khz
no headphone jack
It's a PC controller, so it makes sense to skip the audio jack to save space, as most ppl would connect their headphones to their PC anyways.
Can I use flydig Vader 3 pro on box series s
with an adapter, i've heard it's possible
The adapter it give u?
@@Fdottty no
buy from which store?
gadgethyper.com
Left stick max is outrageous behaviour
Hey I didn't get a bird figurine with mine! Lol
yea so when i ordered it the gadget hyper guy said that i ordered it within 5 mins of him putting it up on the website and that i was the first person in the US to get it lol. So he said he would add a special gift.
@@UmbraNoti And you helped everyone out by dropping an unboxing and inspection. Thanks!
@@UmbraNotilmao
What is the battery life 🙏
same as v3pro, but i mainly used it wired so i don't know the exact amount of time
Where fo uou buy this from?
AliExpress
gadgethyper.com
@@UmbraNoti ty
Can I disable paddles
if you mean disable as in make them null inputs then yes.
Yea I mean like when I press paddles it don’t work
@@Fdottty yes
How to disable the paddles
@@Fdottty when in the flydigi app, select the m1, m2, m3 , m4 button you want to disable, then press one of the paddles to assign it. Assigning it in the way will make it say "null" . That means its disabled
niceeee
Stop teasing it
Umbra what the hell is this
review