have just bought a red one 1 and a half years old. has similar screen, gear indicator in red, a tail tidy ,an r and g rad guard. nice bike to ride,done about 100 miles since getting it last week. i am 72 and like a soft ride so have adjusted rear shock to lowest position,1 notch but not ridden it since. best wishes from the U K.
Hi! I have the same bike, but the Matte Blue one... About the tail bag, what's the model and size of it, please!? Thanks for putting up online info/mods about the bike
Not a problem. Here is the link for the tail bag. You can get them pretty much everywhere, so you don't have to get it from this website. www.amxsuperstores.com.au/motorcycle-product/nelson-rigg-tailbag-cl-1060-s-sport-67-360-11
@@onecolektiv Thanks for the reply. I've checked the app, and it only mentions a -5.2% error (stock 14/36 gearing and using rear tyre). But judging from your comments, you had a +7% error (107 km/h shown Vs. 100 km/h true). How did you came to that number?
How much did you have to remove to get the speedo-healer installed? Edit: Got it done now. I had to remove both seats and the rear suspension, removing the tank cover is optional but helps with wire routing. The wire color code coming from the speed sensor is: Green:Ground, Red:Signal, Black:power. I though red was power initially so I had to re-solder. The working space for soldering/splicing is reduced and made me work harder than it would be otherwise.
I don't remember. It was a couple of years ago. I remember that I didn't remove the tank. It was mostly the seat and tail section that you have to work around.
@@onecolektiv yes and i thought of it too but on cb300r theres no such good place to mount them it either looks ugly or its to tricky els where to b mounted ( if psbl make a vidio on it too) :)
The windscreen is 100% not to buy. If I want to stay away from the wind, I would ride my r6 that day. Otherwise I will ride cb instead for nice looking
Hi guys, Need expert advice I have a 2019 CB 300r which does not come with a slipper clutch, but the 2022 and 2023 edition comes with slipper clutch, when I approached the Honda experts if I could install that 2023 edition slipper clutch on my 2019 bike they instantly disagree with this decision and told if I do this I will lose my bike warranty. So the question is can we install a slipper clutch from 2023 CB 300r on a 2019 edition?
@@onecolektiv currently I'm not concerned about the warranty as it has just ended last week however just wanted to know if the slipper clutch will fit in a older bike.
have just bought a red one 1 and a half years old. has similar screen, gear indicator in red, a tail tidy ,an r and g rad guard. nice bike to ride,done about 100 miles since getting it last week. i am 72 and like a soft ride so have adjusted rear shock to lowest position,1 notch but not ridden it since. best wishes from the U K.
I also dropped my rear shock 1 notch. Perfect ride for that bike. Thanks for commenting. 👍
awesome vids mate! keep it up! much love from Portugal ;D
PS: can you put the links of all the mods in the description pls?
Thank you. All links are in the descriptions of the individual mod videos.
Love your bike dude. Trying to get one myself.
Thanks. Sadly I've sold the Honda.
@@onecolektiv You got something better?
I have a 2019 Triumph Street Triple. I have heaps of videos with that too.
Speedo healer, nobody ever talks about it. Thanks
Hi!
I have the same bike, but the Matte Blue one...
About the tail bag, what's the model and size of it, please!?
Thanks for putting up online info/mods about the bike
Not a problem. Here is the link for the tail bag. You can get them pretty much everywhere, so you don't have to get it from this website.
www.amxsuperstores.com.au/motorcycle-product/nelson-rigg-tailbag-cl-1060-s-sport-67-360-11
The Black back is a good touch
Thanks, it's one of those subtle things that just works.
@@onecolektiv you got a good eye bud
Is a shift stabilizer mod worth the money or just a scham ? Not sure thinking of trying it
where did you find the white display gear indicator?
Healtech has multiple colours to choose from.
Check out the install video for more details 👍
nice video can u modify its handle? like raise it a bit higher ? and make a video on tale tidy installation ?
I have a video on the tail tidy already.
I won't be doing bar risers on this bike as I don't need them.
@@onecolektiv ok :/
How do you find the spray from the back wheel with the tail tidy in the wet weather
It does kick up a bit. If you're riding in wet weather often, I wouldn't recommend it.
nice video!
About the speedo healer... how did you calibrate it?
Or it was just plug n' play?
Thanks
You have to calibrate it, but it's very easy using the app.
@@onecolektiv Thanks for the reply. I've checked the app, and it only mentions a -5.2% error (stock 14/36 gearing and using rear tyre).
But judging from your comments, you had a +7% error (107 km/h shown Vs. 100 km/h true).
How did you came to that number?
I used the gps on my phone to measure actual speed and calibrated the speedo healer according to that.
@@onecolektiv Thank you!
if u planing to put a new exhaust do make a video on installations
Yeah for sure. I'm planning on doing that in the next few months
@@onecolektiv excited
What size tailbag is that? I'm looking at that brand now but I want that size u got. Thx!
I got the 1060s. I recommend getting the 1060st though because it's a little bigger and will fit a helmet.
How much did you have to remove to get the speedo-healer installed?
Edit: Got it done now. I had to remove both seats and the rear suspension, removing the tank cover is optional but helps with wire routing. The wire color code coming from the speed sensor is: Green:Ground, Red:Signal, Black:power. I though red was power initially so I had to re-solder. The working space for soldering/splicing is reduced and made me work harder than it would be otherwise.
I don't remember. It was a couple of years ago. I remember that I didn't remove the tank. It was mostly the seat and tail section that you have to work around.
Hey! Such an amazing video! Could you share how did you mounted the Quad Lock Charger to the Battery? Thank you!
Thank you so much! Yeah for sure I can do a video on that. I want to replace it with the wireless charger anyway.
@@onecolektiv yeah I'd like to know too let me know when you put that video up
Unfortunately I have sold the bike. It's a very easy process though.
the head lights r a bit dull wat i experienced on cb300r so if needed how can i make the lights brighter or any other way to put external lights ?
You can get external lights. Most people that I've seen, mount them on the side of the forks. They'll have they're own switch in the installation kit.
@@onecolektiv yes and i thought of it too but on cb300r theres no such good place to mount them it either looks ugly or its to tricky els where to b mounted ( if psbl make a vidio on it too) :)
Hey mate what tail bag is that?
It's a Nelson-Rigg CL1060S.
Like your videos surprised you haven't removed that 12 pound can on the side of your bike aftermarket weighs 3 pounds .
Yeah I'm getting there. Been working on my triumph first. It's expensive modifying 2 bikes haha. Thanks 👍
What's you job
does ur exhaust wrap heat up ? is itsafe and benificial ?
The exhaust wrap doesn't really do much on this bike. I did it more for looks.
The windscreen is 100% not to buy. If I want to stay away from the wind, I would ride my r6 that day. Otherwise I will ride cb instead for nice looking
Hi guys,
Need expert advice I have a 2019 CB 300r which does not come with a slipper clutch, but the 2022 and 2023 edition comes with slipper clutch, when I approached the Honda experts if I could install that 2023 edition slipper clutch on my 2019 bike they instantly disagree with this decision and told if I do this I will lose my bike warranty.
So the question is can we install a slipper clutch from 2023 CB 300r on a 2019 edition?
I'm not 100% sure. If the dealership is cautioning against it, I would probably take their advise.
@@onecolektiv currently I'm not concerned about the warranty as it has just ended last week however just wanted to know if the slipper clutch will fit in a older bike.
I really don't know the answer to that. I've never needed to change a clutch before. So I haven't done the research on it.
PLATE: 1COLE
the bugs are nice protein
this comment might piss of the vegans mate ;)
1KLTV
Not bad, I'll put that on the list for sure.
Dude don't put your license plates on the Internet
It's not any different to riding around in public where everyone can see your plates anyway.
@@onecolektiv okie dokie brother 👍 sure