Thank u so very much for the detailed explanation! I just moved and accidently clicked into the master settings. I had no clue what those numbers meant, and how to change back to farenheit. Thank u, so much again! ❤️
Thank you - this instruction helped me get tried of the recovery mode which made my thermo come on two hours early and was therefore using peak electricity and gas. Great instruction
First, Thanks to David for making this vid- 2nd, Is there a community college course on this thing or is it University only? Holy engineering committee!
WOW. David Jones just might be the last residential HVAC business owner, installer, and all around honest man on the planet. Thirteen years ago I purchased the subject Thermostat for my home for about $10.00 from a big box store. Today, July 4, 2020, only 13 years later, that unit is not longer available, but the similar current model by Honeywell now sells at my big box store for $45.00 dollars ! NOTICE: NOW I know why almost everyone on the planet wants and scraps for all the money one man can get; INFLATION ! Better make sure you own the land you live on, have a good fresh water well, a maintainable septic system, a roof over your head, AND someway to get food on a daily basis because you are likely going to need it. word to the wise; take it from me; a 76 year old fool....!
if you need to change CELSIUS TO FARENHEIT. DO THIS. very simple. hold the two arrows down at same time until it changes. then you will see two numbers, one on the right, and a double digit on the left. you can totally go down the list of numbers with the arrows. I think the top arrow controls the right numbers(cant remember off top of my head) . make sure you leave the numbers where they were tho because youll only need to change one of those. once you figure out what arrow moves what number youll see numbers 5-7-9-14-30-70 ... go to the #14 and itll be on number 1 or 0 . if its on 0 leave it to 1. if its on 1 move it to 0 i cant remember off the top of my head which ones farenheit but thats how you do it to change that setting.
I hate this thermostat. I just want to set the heat temperature without going through setting wake up times, go to bed time. This is a pain in the ass!!!
Why is it when I have it on the HOLD button set to 70 my heat will run and my temp will say like 80 and it's so hot in here? I cannot seem to get the heat to the temp I'm holding it on!!
Just to note this programmable thermostat is a store brand sold to non technicians. Ones from your HVAC company are same kind of thermostat different model number. You as a customer put this in and it doesn't work then your out that money and any damages done to equipment due to the fact your not a technician so therefore no warranty. 5 years warranty is if installed by qualified technician.
very simple. hold the two arrows down at same time until it changes. then you will see two numbers, one on the right, and a double digit on the left. you can totally go down the list of numbers with the arrows. I think the top arrow controls the right numbers(cant remember off top of my head) . make sure you leave the numbers where they were tho because youll only need to change one of those. once you figure out what arrow moves what number youll see numbers 5-7-9-14-30-70 ... go to the #14 and itll be on number 1 or 0 . if its on 0 leave it to 1. if its on 1 move it to 0 i cant remember off the top of my head which ones farenheit but thats how you do it to change that setting.
good thing I was ale to eventually figure this thing out on my own. this video did not answer the one simple question I had about this stupid thing. how do you turn off that stupid weekday/ weekend shit that no one cares about?
+UserCdk1 I don't live in that house anymore. I think you just push the hold button and it won't do the stupid week and time of day automatically. so once you have it set on either heat or cool just push the hold button. either it pops up on the screen right away or you have to push it a few times. I can't remember exactly.
Didn't help me at all, I just want to cancel or reset and start over so I can set the thermostat manually to different temperatures during night and day where it gets hotter than hell west of Phoenix, I have to regulate the temperature setting throughout the day so when it gets 115 deegrees I set it to 87 so it doesn't constantly run my AC to death, I hate this thermostat thinking about blasting it off the wall frustrating as hell.
Thank u so very much for the detailed explanation! I just moved and accidently clicked into the master settings. I had no clue what those numbers meant, and how to change back to farenheit. Thank u, so much again! ❤️
Thank you - this instruction helped me get tried of the recovery mode which made my thermo come on two hours early and was therefore using peak electricity and gas. Great instruction
Thanks for making this so simple.
thanx, your video gave me the courage to confront this thermostat and kick it's ass!
is there a way to turn off the programmable features? dont really want to set a a temperature for everyday?
yes,press hold.
First, Thanks to David for making this vid- 2nd, Is there a community college course on this thing or is it University only? Holy engineering committee!
Thank you so much. Very easy to follow.
WOW. David Jones just might be the last residential HVAC business owner, installer, and all around honest man on the planet. Thirteen years ago I purchased the subject Thermostat for my home for about $10.00 from a big box store. Today, July 4, 2020, only 13 years later, that unit is not longer available, but the similar current model by Honeywell now sells at my big box store for $45.00 dollars ! NOTICE: NOW I know why almost everyone on the planet wants and scraps for all the money one man can get; INFLATION ! Better make sure you own the land you live on, have a good fresh water well, a maintainable septic system, a roof over your head, AND someway to get food on a daily basis because you are likely going to need it. word to the wise; take it from me; a 76 year old fool....!
Thx you for that
I always treat everyone like I would want them to treat my mother
Here I am 10yrs later gracious for you sir! It's time for an upgrade lol. This thing put me through H*LL..
if you need to change CELSIUS TO FARENHEIT. DO THIS. very simple. hold the two arrows down at same time until it changes. then you will see two numbers, one on the right, and a double digit on the left. you can totally go down the list of numbers with the arrows. I think the top arrow controls the right numbers(cant remember off top of my head) . make sure you leave the numbers where they were tho because youll only need to change one of those. once you figure out what arrow moves what number youll see numbers 5-7-9-14-30-70 ... go to the #14 and itll be on number 1 or 0 . if its on 0 leave it to 1. if its on 1 move it to 0 i cant remember off the top of my head which ones farenheit but thats how you do it to change that setting.
THANK YOU SO MUCH!
I've been trying to find the correct fkn answer for going on 40mins now
What if someone home all day you want temp to stay same all day everyday?
Is there a way to lock temperature settings. My kids play with thermostat too much and i end up with high electric bills.
Thank you--you were very helpful.
I hate this thermostat. I just want to set the heat temperature without going through setting wake up times, go to bed time. This is a pain in the ass!!!
Thanks ...
When I programed mine to start at. 6 pm it will start at 530 . Could you please help me ?
Thanks so much
Is there a way to change the offset?
Where can I buy this thermostat
How can you take it off programmed
how do I cancel recovery mode? is that 13-0?
nice!!!
Urgent...How do you change the batteries?
how you turn off the schedule on this thermostat
Why is it when I have it on the HOLD button set to 70 my heat will run and my temp will say like 80 and it's so hot in here? I cannot seem to get the heat to the temp I'm holding it on!!
hold freezes it at the current temp not the set temp
Just to note this programmable thermostat is a store brand sold to non technicians. Ones from your HVAC company are same kind of thermostat different model number. You as a customer put this in and it doesn't work then your out that money and any damages done to equipment due to the fact your not a technician so therefore no warranty. 5 years warranty is if installed by qualified technician.
When I finish the schedule set up, after pressing the up and down error I get I do not get #1. How do I correct this
that's not needed after the schedule setting. that's only necessary for advanced setting
How to stop the scheduled
How can take off program
Hi can u show me how to change my thermostat celsius to fahrenhei?pls.
How do I change it from Celsius to Farenheit
very simple. hold the two arrows down at same time until it changes. then you will see two numbers, one on the right, and a double digit on the left. you can totally go down the list of numbers with the arrows. I think the top arrow controls the right numbers(cant remember off top of my head) . make sure you leave the numbers where they were tho because youll only need to change one of those. once you figure out what arrow moves what number youll see numbers 5-7-9-14-30-70 ... go to the #14 and itll be on number 1 or 0 . if its on 0 leave it to 1. if its on 1 move it to 0 i cant remember off the top of my head which ones farenheit but thats how you do it to change that setting.
good thing I was ale to eventually figure this thing out on my own. this video did not answer the one simple question I had about this stupid thing. how do you turn off that stupid weekday/ weekend shit that no one cares about?
+kenny mccoy That's what I wanna know! haha.
+UserCdk1 I don't live in that house anymore. I think you just push the hold button and it won't do the stupid week and time of day automatically. so once you have it set on either heat or cool just push the hold button. either it pops up on the screen right away or you have to push it a few times. I can't remember exactly.
kenny mccoy Thanks, I was able to find that out :)
+kenny mccoy Just read your comment. LMAO, seriously. I know EXACTLY what you mean by the stupid weekday'weekend "stuff". Funny.
i don't want to go thru all this garbage this is just plain stupid i just want to set this garbage to one setting
Step 14 change setting to 1. It shows on this video.
I don't have the instructions like u have what to do
Didn't help me at all, I just want to cancel or reset and start over so I can set the thermostat manually to different temperatures during night and day where it gets hotter than hell west of Phoenix, I have to regulate the temperature setting throughout the day so when it gets 115 deegrees I set it to 87 so it doesn't constantly run my AC to death, I hate this thermostat thinking about blasting it off the wall frustrating as hell.
Can't ever get the heat on. It comes on randomly. Last time it came on it was cool air not heat! I even set it. SMH
Symbols??? Meanings
Honeywell 2000 pro
Fking hate this bs i just want an AC/heat buttons, on/off and temp ..not all this complicated weekday weekend leave/return sleep etc bunch of crap!
this is the stupidest feature
what a poorly designed device