Courtney, Thank you so much for teaching use how to use this wonderful machine. You make it so easy for us to learn I am 56 and I can follow you so easily,you have a fun and happy way to keep me interested to keep watching but getting right to the point. Bless you sweetheart I really enjoy you. Tammy ❤
We have a girl's club at the church and 5 flowers that were cut out and sewed a button in the middle then sewed them on elastic for Mother's Day wRist Corsages.
You are simply the goddess of cutting! I have a plan to cut out felt for an ornament. Got my rotary cutter recently but couldn't remember what mat to use. Knew you would know. Thanks again for your time and enthusiasm to make us better crafters. You are a treat . . . I whipped out a felt christmas card today that turned out so cute. Not sure if it would have been so easy had I not listened to this video. Thank you again.
I want to love my scan n cut so much however I have had nothing but trouble getting it online to get it set up. Wasted over a year now and still have not been able to use it . Ready to sell it.
I also couldn't get mine to go online, but don't get rid of it. It does so much without wifi. I scan in all my doll patterns and CUT THEM OUT with no problems 😊. My snc does all the work for me.
Thank you for sharing, really enjoy watching, question I’ll like to see again the etched glass demo , also some demo but maybe give us some ideas to do with wood and glass I’m thinking Christmas gifts. Your great Courtney
I saw Makers Gonna Make, I believe it was, and Tanner mentioned using “Contact paper” on your mat and place your felt or fabric on the contact paper. That way the strings or felt pieces would stick to that instead of your mat! I haven’t tried it yet, but it sounds like it would work. By the way, your videos are very informative! Thanks
Love the show of course Could you do a design off the machine that pieces an f show how to save as a .pes design for embroidery. Second question is there a way to make a stencil?😊
Hello! The ScanNCut reads embroidery formats and converts to a cut file, but does not convert a cut file to an embroidery file. You could use software for that, or if you have the Stellaire, Luminaire or PR1055x use my design center inside the machine. - Barbara
Thanks for your videos. Just learned the hard way that for appliqué fabric, treated with heat and bond , if I am placing fabric on my mat with paper side up the design( which is not symmetrical like flower shown)needs to be flipped along vertical axis
I'd like to have a couple of questions answered. First one is when you cut the corduroy fabric, did you place the nap side up or face down? Also, if cutting out letters with wonder under applied , does the design have to be mirror imaged like HTV? Thank you for all the great demonstrations.
Hi Courtney, thanks for another great video!!!!!! I would like to know if the SNC is capable of cutting acrylic and can emboss as well; if so, what SNC accessories would I need? Thanks again!!!
Great video! Is this scanNCut a 325 in this video? Is that the current, up to date model? Reason I ask is I am looking for a scanNcut for fabric applique and would also like to do heat transfer for labels and tshirts. Also would like to make vinyl transfers to put on glass and mirrors. Would the 325 be the one to get or is it overkill? Does it come with all the mats and accessories that I would need to start? I don't want the disney one. I just want it to do lots. Thanks for all your help along the way.
Questions and answers, please. Also do u demo how then these little flowers are sewn around on luminaire! That would be awesome. Also, noticed you just brayered fabrics down with out backing. Is this correct. No Terial manic on corduroy? Thank you for this. Hope to learn my machine as much as you show for the three way connection feature. Amazing machine. I have 325. Looking forward to HQS in November!! Hope to see you!
You would need software like Embrilliance Stitch Artist 2 to convert your line design into a .pes or any other embroidery format for the stitching around.
Courtney enjoy your videos. Just got my ScanNCut for Christmas so I’m new and learning. Question..can you use a vinyl blade in the standard holder instead of buying the whole vinyl kit? Thank you. Watching from Oregon.
I think I am in trouble. I have had my Rotary blade for a few months and have not had much luck with it and now I think I know why. I didn't realize I was supposed to register it and I through out the box it came in with the sheet of the directions which I realize now that I missed a very important procedure. Is there anyway I can get my rotary blade registered or what ever needs to be done to have it work right? I am so mad at myself. Please help me if you can.
Question: I would like to apply under wonder under my floral fabric and cut out individual flowers. In order to do what I want to do, the paper side of the under wonder would need to be placed on the mat so I could scan the flowers that I want to cut. How would I do this? What mat? What blade?
I do lots of appliqué using wonder under. You need to still put the fabric side down with the wonder under on top. But you will need to flip your design in the SNC so that the design will be reversed for cutting and come out the way you originally intended.
I only buy steam a seam light because it has a sticky side and a paper side. Can that work. I use it because it does away with the ironing of appliqué pieces. Have you tried it?
That is want she was using in this demo. Fabric side down and paper side up. You would need to reverse (flip) the design inside the SNC for cutting so that it would be in the original design when peeling off the paper and ironing it down.
I am new to Scan n Cut and appliqué. I have paper images and want to scan them then cut them out with adhesive on the back of the cotton. Do I need to scan in a reverse image or scan it right side up. I am new to your channel so if you have addressed this in previous videos, direct me to the correct video.
I need a bit of help. I own a sdx325 , I’ve owned it for a very short time and haven’t used it very much ? it is not cutting fabric at all. I have both reg and fabric mats and reg and fabric blades. I’ve tried everything , why won’t it cut ???
I have a dedicated felt mat. I cut a lot of embroidery machine felt ornaments at Christmas and the mat becomes too “hairy” for me to want to cut any other fabric on the mat. Occasionally I will soak and rub the mat clean.
Courtney, Thank you so much for teaching use how to use this wonderful machine. You make it so easy for us to learn I am 56 and I can follow you so easily,you have a fun and happy way to keep me interested to keep watching but getting right to the point. Bless you sweetheart I really enjoy you. Tammy ❤
We have a girl's club at the church and 5 flowers that were cut out and sewed a button in the middle then sewed them on elastic for Mother's Day wRist Corsages.
I love watching these shows over and over again. it really helps me
You are simply the goddess of cutting! I have a plan to cut out felt for an ornament. Got my rotary cutter recently but couldn't remember what mat to use. Knew you would know. Thanks again for your time and enthusiasm to make us better crafters. You are a treat . . . I whipped out a felt christmas card today that turned out so cute. Not sure if it would have been so easy had I not listened to this video. Thank you again.
I bought the scan n cut for cutting fabric.
I want to love my scan n cut so much however I have had nothing but trouble getting it online to get it set up. Wasted over a year now and still have not been able to use it . Ready to sell it.
I also couldn't get mine to go online, but don't get rid of it. It does so much without wifi. I scan in all my doll patterns and CUT THEM OUT with no problems 😊. My snc does all the work for me.
WOW... Perfect timing. I was doing some applique and really want to start using my SNC for this... Thank you Courtney.
It cuts felt great.I cut over 200 felt flower pedals.
Thank you for sharing, really enjoy watching, question I’ll like to see again the etched glass demo , also some demo but maybe give us some ideas to do with wood and glass I’m thinking Christmas gifts. Your great Courtney
Love that you show the scan and cut screen close up.
never know the best blade or mat, this is so very helpful, but I am always destracted by your gorgeous hair. Thanks for you helpful videos.
I saw Makers Gonna Make, I believe it was, and Tanner mentioned using “Contact paper” on your mat and place your felt or fabric on the contact paper. That way the strings or felt pieces would stick to that instead of your mat! I haven’t tried it yet, but it sounds like it would work. By the way, your videos are very informative! Thanks
Best video I have ever seen. Thank you for the tips and tricks.
Thank you Courtney another great tutorial. COOL 😎
Soooo close to getting one of these
That was amazing! Thanks Courtney!
Waiting in slightly cooler New Hope, PA
Love the show of course
Could you do a design off the machine that pieces an f show how to save as a .pes design for embroidery.
Second question is there a way to make a stencil?😊
Hello! The ScanNCut reads embroidery formats and converts to a cut file, but does not convert a cut file to an embroidery file. You could use software for that, or if you have the Stellaire, Luminaire or PR1055x use my design center inside the machine. - Barbara
You would need a program called Embrilliance Stitch Artist 2 to convert your line design to a .pes or any other embroidery stitching machine format.
Great job Courtney!!!
Thanks for your videos. Just learned the hard way that for appliqué fabric, treated with heat and bond , if I am placing fabric on my mat with paper side up the design( which is not symmetrical like flower shown)needs to be flipped along vertical axis
Fabulous video as usual!!
Nice I need to get me a scan and cut
Great video thanks 🌻
I'd like to have a couple of questions answered. First one is when you cut the corduroy fabric, did you place the nap side up or face down? Also, if cutting out letters with wonder under applied , does the design have to be mirror imaged like HTV? Thank you for all the great demonstrations.
Yes, if fabric side is down and wonder under is on top, your design needs to be flipped (mirror imaged).
Great video! Thank you!!!
Great video. I've always steered away from cutting batting, because it seems like it would easily pull apart when removing it from the mat.
Can the mat be cleaned
Hi Courtney, thanks for another great video!!!!!! I would like to know if the SNC is capable of cutting acrylic and can emboss as well; if so, what SNC accessories would I need? Thanks again!!!
Could you please show vinyl - like keyfobs with 2 layers of vinyl.
Perfect cut
Great video! Is this scanNCut a 325 in this video? Is that the current, up to date model? Reason I ask is I am looking for a scanNcut for fabric applique and would also like to do heat transfer for labels and tshirts. Also would like to make vinyl transfers to put on glass and mirrors. Would the 325 be the one to get or is it overkill? Does it come with all the mats and accessories that I would need to start? I don't want the disney one. I just want it to do lots. Thanks for all your help along the way.
If you don’t want the Disney one, then the 325 is great for all you mentioned. The 330 is the Disney model.
Questions and answers, please. Also do u demo how then these little flowers are sewn around on luminaire! That would be awesome. Also, noticed you just brayered fabrics down with out backing. Is this correct. No Terial manic on corduroy? Thank you for this. Hope to learn my machine as much as you show for the three way connection feature. Amazing machine. I have 325. Looking forward to HQS in November!! Hope to see you!
When I cut an appliqué from fabric, example an ornament. Do I need special software to add the stitches around it. I have a Babylock Solaris.
You would need software like Embrilliance Stitch Artist 2 to convert your line design into a .pes or any other embroidery format for the stitching around.
Thank you, I have embrillance but not stitch artist 2. Guess I may have to get it.
Courtney when would you use a ‘deep cut’ blade ?
What do you use to re-stick your fabric Matt
Should the side switch be on #1 or #2 for fabric cutting ?
Courtney enjoy your videos. Just got my ScanNCut for Christmas so I’m new and learning. Question..can you use a vinyl blade in the standard holder instead of buying the whole vinyl kit? Thank you. Watching from Oregon.
Hello from California
I think I am in trouble. I have had my Rotary blade for a few months and have not had much luck with it and now I think I know why. I didn't realize I was supposed to register it and I through out the box it came in with the sheet of the directions which I realize now that I missed a very important procedure. Is there anyway I can get my rotary blade registered or what ever needs to be done to have it work right? I am so mad at myself. Please help me if you can.
Haven’t used mine yet but have had for months. Glad to know this info too.
Question: I would like to apply under wonder under my floral fabric and cut out individual flowers. In order to do what I want to do, the paper side of the under wonder would need to be placed on the mat so I could scan the flowers that I want to cut. How would I do this? What mat? What blade?
I do lots of appliqué using wonder under. You need to still put the fabric side down with the wonder under on top. But you will need to flip your design in the SNC so that the design will be reversed for cutting and come out the way you originally intended.
According to Brother, if your fabric is interfaced you can use the standard mat. ruclips.net/video/8upcoxWnhY0/видео.htmlsi=sldp-Tw-0XHwJK6v&t=263
Can you cut more than one layer of cotton at a time?
Just found you. Loved this video!
Couldn’t you cut the cotton material using the standard purple mat with the black auto blade?
According to brother, as long as the materiel has iron on interfacing on it you can use the standard mat and autoblade.
I only buy steam a seam light because it has a sticky side and a paper side. Can that work. I use it because it does away with the ironing of appliqué pieces. Have you tried it?
That is want she was using in this demo. Fabric side down and paper side up. You would need to reverse (flip) the design inside the SNC for cutting so that it would be in the original design when peeling off the paper and ironing it down.
Cut on what pressure for Jean material?
I am new to Scan n Cut and appliqué. I have paper images and want to scan them then cut them out with adhesive on the back of the cotton. Do I need to scan in a reverse image or scan it right side up. I am new to your channel so if you have addressed this in previous videos, direct me to the correct video.
Check out Becky Thompson of power tools with thread. She goes into great detail on this.
Wow….almost 20 k
how do you clean you mat
Just the info I’ve been needing! Thanks! How do you clean your mat?
Hello! We recommend totally awesome purchase at bargain stores - Barbara
@@allbrands1976 what is totally awesome purchase at bargain stores?
She is referring to the LA Totally Awesome spray cleaner that you can find at Dollar stores. It is a yellow liquid.
Hi everyone 👋 Kansas here
How does vinyl fabric do cutting? I make bags out of vinyl and trying to decide between cricut or scan and cut.
I absolutely love all your videos you’re fantastic and talented❤😊😊
hi Courtney, I have the DX85m to I need the fabric mat an Blade to cut out fabric for applique on this machine?
I need a bit of help. I own a sdx325 , I’ve owned it for a very short time and haven’t used it very much ? it is not cutting fabric at all. I have both reg and fabric mats and reg and fabric blades. I’ve tried everything , why won’t it cut ???
I have a dedicated felt mat. I cut a lot of embroidery machine felt ornaments at Christmas and the mat becomes too “hairy” for me to want to cut any other fabric on the mat. Occasionally I will soak and rub the mat clean.
Questions and answers ❤ Marine vinyl
#allbrands
#Allbrands
#AllBrands
A little bit uncomfortable to watch this girl. She moves around so much, her head her hands I just have to go to another channel.
#Allbrands